My Fujifilm X-T1 (X-Trans II) Kodacolor Film Simulation Recipe


49474460228_901325865e_c

Man in Red – Farmington, UT – Fujifilm X-T1 – “Kodacolor”

Yesterday I published my Kodachrome 64 recipe for X-Trans II cameras, such as my Fujifilm X-T1, and today I will share with you my Kodacolor recipe for X-Trans II! Because this Kodacolor recipe requires the Classic Chrome film simulation, those with X-Trans I cameras can’t use it, but those with X-Trans II or Bayer sensor cameras can. While I got the overall aesthetic pretty darn close to the original Kodacolor recipe for X-Trans III and IV, the one thing that I wish I could change is the grain. Newer Fujifilm cameras have faux grain options, but older ones don’t. If you want to mimic the grain in-camera, your best option is to use a higher ISO, such as 3200 or 6400, and let the digital noise act as faux grain. Otherwise, I’m quite pleased with how this Kodacolor film simulation recipe turned out.

Classic Chrome
Dynamic Range: DR400
Highlight: +1 (Medium-High)
Shadow: +1 (Medium-High)
Color: -2 (Low)
Sharpness: 0 (Medium)
Noise Reduction: -2 (Low)
White Balance: 6300K, -3 Red & -2 Blue
ISO: Auto, up to ISO 6400

Example photographs, all camera-made JPEGs using this Kodacolor recipe on my Fujifilm X-T1:

49474935696_0c3cfd7b40_c

Front Runner – Farmington, UT – Fujifilm X-T1

49475158892_b4ffefd3e2_c

Fro – Farmington, UT – Fujifilm X-T1

49474450693_e02076e412_c

Cross at Crosswalks – Farmington, UT – Fujifilm X-T1

49474940211_98cda212f9_c

Look Both Ways – Farmington, UT – Fujifilm X-T1

49474450553_c026249f58_c

Pipe – Farmington, UT – Fujifilm X-T1

49474933931_41b254a22d_c

Rusty Shadows – Farmington, UT – Fujifilm X-T1

49474455003_23b05e9f93_c

Stop by the Rack – Farmington, UT – Fujifilm X-T1

49474935471_b59ce9f0d5_c

Nord’s Stop – Farmington, UT – Fujifilm X-T1

49474935606_b34163107e_c

Mall Across the Mud – Farmington, UT – Fujifilm X-T1

49474448773_d6df7bf74c_c

Pond Among Reeds – Farmington Bay, UT – Fujifilm X-T1

49475157142_63bcac536d_c

Grass on the Water – Farmington Bay, UT – Fujifilm X-T1

49475157097_1eca02d929_c

Lake Reflection – Farmington Bay, UT – Fujifilm X-T1

49475157132_43602b8bc4_c

Antelope Island Beyond Farmington Bay – Farmington Bay, UT – Fujifilm X-T1

49474448583_7ba8f7f683_c

Camera Shelf – Farmington, UT – Fujifilm X-T1

49475158962_b7a01160e8_c

Green is Good for My Soul – Farmington, UT – Fujifilm X-T1

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There's a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

36 comments

  1. Pingback: My Fujifilm X-T30 Kodacolor Film Simulation Recipe | Fuji X Weekly
  2. Michał · February 3, 2020

    It’s amazing, as well as yesterday’s “Kodachrome 64”!
    I hope this is scheduled next 😉
    https://fujixweekly.com/2019/10/26/my-fujifilm-x-t30-color-negative-film-simulation-recipe/

    Again, I absolutely love the colour of photo of the mug + old cameras. Mountain range is also wonderful.

    And by the way, your articles about monochrome inspired me and I went to the forest two days ago with my friend having one goal: set to JPG Monochrome only and find interesting shapes. It gave me much fun and some nice pictures for which I used X-T1’s Monochrome Green Filter + WB Fine (Daylight) with +5 Red, -5 Blue.

    Liked by 1 person

    • Ritchie Roesch · February 3, 2020

      Thank you, I appreciate your feedback and kind words! There will be more X-T1 recipes coming soon. I will try those Monochrome settings, thanks for sharing!

      Like

  3. Russel · February 4, 2020

    Hi Ritchie. How do you find the XT1 ISO performance at 6400 in colour jpegs? I’m ok with high IOS in B&W.

    And another question re. handling of the XT1 buttons? Have you gone the sugru route?

    Like

    • Ritchie Roesch · February 4, 2020

      For color photography, I feel that ISO 3200 is a better place to top out on the X-T1. ISO 6400 isn’t terrible, but I don’t l like it as much as ISO 3200. If you are trying to use the noise to act as grain, ISO 6400 does a decent job of it.
      What’s the “sugru route” for button handling? I’m not familiar.

      Liked by 1 person

      • Russel · February 4, 2020

        Ah, it’s a type of putty people add to the buttons to give them a better feel as the XT1 buttons are meant to be quite flat

        Liked by 1 person

      • Ritchie Roesch · February 4, 2020

        Ok, that makes sense. They are indeed quite flat, which can be both good and bad. I’ll look into it. Thanks!

        Liked by 1 person

  4. Nicolas · February 5, 2020

    Hi Ritchie

    I have a general question concerning your DR settings.
    Many of your film simulations contain DR400 setting which sets the camera to a minimum of ISO 800 (even in bright sunlight)
    Would it make a huge difference in appearence if the DR setting was on “auto” or “200”?

    I’m asking this because I just shot in bright sunlight with the Kodakcolor film simulation https://fujixweekly.com/2019/07/19/my-fujifilm-x-t30-kodacolor-film-simulation-recipe/ and I had some ridiculous high shutter speeds at 5.6

    thanks

    Like

    • Ritchie Roesch · February 5, 2020

      You will have to adjust the highlights down a little to compensate, but sure you can.

      Like

      • Nicolas · February 5, 2020

        You mean from -1 Highlights to -2 or to 0?

        Thanks

        Like

      • Ritchie Roesch · February 5, 2020

        So the DR settings change the highlights. DR200 has a curve applied that affects the highlights to prevent clipping. DR400 is even more aggressive. So if Highlight is -1 on DR400, you’d want Highlight to be -2 at DR200, and you should get similar (but not identical) results.

        Like

      • Nicolas · February 5, 2020

        Thanks for elaborating
        🙂

        Liked by 1 person

      • Ritchie Roesch · February 5, 2020

        No problem, glad to help!

        Like

      • Nicolas · February 5, 2020

        I’m sorry I have one more question:
        How would DR auto jump in?

        What are the parameters that the camera decides whether DR200 or DR400 is being used?

        Just out of curiosity
        🙂

        Like

      • Ritchie Roesch · February 5, 2020

        With auto DR, my experience is that the camera will use DR100, except in bright light situations, when it will choose DR200. If you point the camera at the sun it might choose DR400, but not often.

        Like

      • Nicolas · February 5, 2020

        Thank you 😊

        Liked by 1 person

  5. Mario Salinas · February 7, 2020

    Thank you Ritchie! Love this and the Kodachrome 64. I got some beautiful shots today with the Kodacolor recipe. I hope Ektar and Classic Negative are in the works. 😉

    Liked by 1 person

    • Ritchie Roesch · February 7, 2020

      I’m glad that you like them! Hopefully the next two will be ready soon, and more to follow after that.

      Like

  6. Pingback: Fujifilm X-T1 (X-Trans II) Kodachrome II Film Simulation Recipe | Fuji X Weekly
  7. Arjen · February 16, 2020

    Hi Ritchie, long time visitor and fan of your website here. Thank you for investing your time in the older sensors! I’ve been adapting your recipes to the X-Trans II sensor of my X-E2 for a while now. Some worked better than others. Now I can copy your results one on one. Going to try this recipe today 😉

    Made an account just to say this. Keep up your awesome work (for old and new sensors :))!

    Like

  8. Alex · February 25, 2020

    Hey Ritchie,
    Just wanted to let you know that your hard work is vastly appreciated. I’ve been using your recipes extensively on my X-E3, and now I’ll be trying them on my X-T1. One of the main reasons I’m using Fujifilm cameras is the SOOC results they give, and your work plays a big part in this. I’m glad you are devoting time and energy to utilising these non-current sensors, and your dedication to the X system benefits so many of us out there. I’m really, really liking this, as well as the Kodachrome II and the Ektachrome 100SW recipes, but of course will test all of them

    Liked by 1 person

    • Ritchie Roesch · February 25, 2020

      Thank you for your kind words of encouragement! It’s really appreciated!

      Like

  9. Pingback: 12 New Film Simulation Recipes in 2020, And Counting… | Fuji X Weekly
  10. Pingback: Kodacolor Film Simulation Recipe, Part 2 | Fuji X Weekly
  11. Pingback: [Not] My Fujifilm X-T1 (X-Trans II) Kodak Portra 160 Film Simulation Recipe | Fuji X Weekly
  12. Tom · June 10, 2020

    I really love it! I am so glad I discovered your site! Recently picked up a X-T10 and have had a lot of fun playing with your recipes.

    I really would love to see a X-Trans II Version of the Kodak Ektar 100 recipe some time! Thanks for all your work!

    Like

    • Ritchie Roesch · June 10, 2020

      Thanks! I plan to create more X-Trans II recipes soon. Actually, I started up today, so maybe in a couple weeks…

      Like

  13. Pingback: Film Simulation Recipe Compatibility: Bayer, X-Trans I & II | Fuji X Weekly
  14. Bae · December 4, 2020

    Hello from South Korea!
    There is a website named Fujipeople that Korean people using Fuji’s camera gather. They share the link of this website and once i used this recipe, my photo life completely changed.
    I just want to say that many people in South Korea love your film recipes and appreciate your work.
    I also really really love and apppreciate your work! I want there will be Android version of new app as soon as possible. I will always be a big fan of your work. Cheers!
    (I’m sorry for my english bad..)

    Liked by 1 person

    • Ritchie Roesch · December 6, 2020

      Hi, Bae! I appreciate this message! Thank you for your kind and encouraging words! I’m working on the Android app right now. Hopefully it won’t take too long to complete. Cheers!

      Like

  15. ionutcirja · August 19

    Really love this one Ritchie! I used it for a while and it became my favourite one. I was wondering if there is any adjustment I should/can do given the fact I’m using it on a trans 4 sensor (x pro 3)?

    Regards, Ionut

    Liked by 1 person

  16. Pingback: Fujifilm X-T1 (X-Trans II) Film Simulation Recipe: Kodacolor 200 | FUJI X WEEKLY
  17. Pingback: My Fuji X70: Kodacolor film-simulation | Fotoeins Fotografie
  18. Pingback: Why I Love The Fujinon 35mm F/2 | FUJI X WEEKLY

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s