Fujifilm X100V New Feature: Clarity



The Fujifilm X100V has a new feature called Clarity. It actually first appeared on the X-Pro3, and it’s also on the new X-T4, but the X100V is the first camera that I’ve used with it. I’m always very happy whenever Fujifilm gives us new JPEG options, as it allows me to  more accurately achieve the look that I’m after in-camera. I can create better film simulation recipes when I’m given more tools, and the X100V indeed has some new tools.

If you’ve ever done RAW processing, you’ve probably seen a Clarity tool within your software of choice. Maybe you use it all of the time, maybe you’ve never touched it. What exactly Clarity does with each software is slightly different, but the gist of it is that it increases mid-tone contrast, while (mostly) leaving the highlights and shadows untouched. This makes the image appear more contrasty while not blocking up shadows or blowing out highlights. Because Clarity often adds micro-contrast (contrast to fine lines), it can make an image appear to be sharper and more finely detailed than it actually is. Some software programs include sharpening within Clarity. Too much Clarity can often make a picture look unnatural and “over baked”.

I like the idea of having a Clarity option on my Fujifilm camera, but I was really unsure of how it would look. Is it actually a good tool? Does it produce pleasing results? Where should I set it on my camera?

In the manual Fujifilm states that Clarity increases or decreases “definition” while minimally altering highlights and shadows. The camera has the options of -5 to +5, with 0 being the default setting. Let’s take a look at some examples to see what exactly this new feature does to photographs.


Clarity -5


Clarity 0


Clarity +5

You can see from the photographs above that there’s a noticeable difference between Clarity set at -5, 0 and +5. There’s a significant contrast difference between the three pictures. Even highlights and shadows are affected. The first picture looks “soft” while the third picture boarders being “over-baked” with too much definition. Let’s take a closer look at some crops, and add -2 and +2 while we’re at it.


Clarity -5


Clarity -2


Clarity 0


Clarity +2


Clarity +5

When you look closely, you can appreciate using minus Clarity for softening skin. At -2 there’s a small difference, but by -5 there’s a big difference. The X100V has a new lens, and it’s sharper, especially when wide open. Some people (myself included) appreciated the softness of f/2 on the old X100 series lens for artistic effect, but the X100V is tack sharp across the board at all apertures. However, -5 Clarity will give a similar softness at any aperture as the old X100 lens does at f/2. Portrait photographers might especially appreciate selecting a minus Clarity option, and somewhere in the range of -2 to -5 seems to be nice.

On the other side, +5 Clarity is definitely too much for some circumstances, particularly portraits. Even +2 might be pushing it in this case, although the results are acceptable in my book. I find that minus Clarity is better when skin is involved, but you can use plus Clarity for more dramatic portraits, although I’d limit it to no higher than +3, unless you’re trying to accentuate something like wrinkled skin and a greying beard, in which case up to +5 might be acceptable. Outside of portraits, I like adding Clarity, and I find that +2 or +3 is a good range for me.

Here are some more examples:


Clarity -5


Clarity -3


Clarity 0


Clarity +3


Clarity +5


Clarity -5


Clarity -3


Clarity 0


Clarity +3


Clarity +5

The difference between -5 and +5 Clarity is pretty significant, but the in-between differences aren’t huge. It’s difficult to notice a plus or minus one difference. Going up or down two spots is a bit more obvious, although if you’re not closely comparing side-by-side examples you might not pick up on it. I think you’re perfectly fine selecting any of the Clarity options, but for portraits I’d consider using minus Clarity, unless you’re want a dramatic portrait look. For everything else adding a little Clarity helps the picture to pop more. I personally like Clarity set at +2.

Because Clarity adds contrast and does affect highlights and shadows, if you go higher than +3 Clarity, consider decreasing Highlight and Shadow by one to compensate. Also, if you go lower than -3 Clarity, consider increasing Highlight and Shadow by one to compensate. The X-T4 can do .5 Highlight and Shadow adjustments (please, Fujifilm, update the X100V to allow this, too), and that’s probably closer to what you need to compensate for the increased or decreased contrast due to selecting the far ends of Clarity. Just be aware that when you change the Clarity setting, you are changing the picture’s contrast.


+3 Clarity

Something that I need to point out is that when Clarity is set to anything other than 0, it takes the camera longer to save the file. Fujifilm actually recommends setting Clarity to 0 and adding it later by reprocessing the RAW files in-camera. If you need to shoot quickly, this might be a good option, but if you’re not in a hurry, I’d just set it to what you want it to be so that you don’t have to change it later. Yes, it does slow you down, but if you’re not in a hurry, it’s not a big deal.

In my opinion Fujifilm did a good job of implementing Clarity on the X100V. It’s a useful tool. Those who appreciated the softness of f/2 on the older models will appreciate using minus Clarity on the new model. Those who want to add just a little more punch to their pictures will like using plus Clarity. Each situation might benefit from a Clarity adjustment, and you’ll have to decide which setting is the best for the scene. Whether it’s adding or subtracting Clarity, this is a feature you’ll find me using often. Fujifilm’s inclusion of Clarity on the X100V is something that I’m extremely happy with.

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black    Amazon   B&H
Fujifilm X100V Silver   Amazon   B&H

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There's a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!



  1. Thomas Schwab · May 25, 2020

    Lieber Ritchie, wieder ein interessanter und vor allem hilfreicher Artikel. Über eine Erweiterung der Kontrast Funktion um 0.5 Schritte würde ich mich auch mit der Xpro3 freuen.
    Vielen Dank Deine Ausarbeitung!
    LG Thomas

    • Ritchie Roesch · May 25, 2020

      Ich schätze deine freundlichen Worte. Ich hoffe, dass die halben Anpassungen sowohl beim X-Pro3 als auch beim X-T3 und X-T30 vorgenommen werden.

  2. James Symmonds · May 26, 2020

    I’ve been waiting to see what happens when you get to that setting. Overall I can’t really tell enough of a difference to warrant the added processing time so I keep forgetting it’s there. I think I’d almost need to do side by side slices to see it.

    • Ritchie Roesch · May 27, 2020

      It’s a pretty big difference when you compare +5 to 0 to -5, but it’s difficult to notice a one or two adjustment, especially if you’re not doing a side-by-side comparison.

  3. Pingback: My Fujifilm X100V Kodachrome 64 Film Simulation Recipe | Fuji X Weekly
  4. Massimo Valdarchi · May 28, 2020

    Congratulations, really interesting!
    It would be fantastic if you created a section where you can show the other post production functions (highlights, shadows, noise reduction, etc.) of the extraordinary fujifilm cameras in the same way.
    In the meantime, I thank you for the great work you do.
    Massimo Valdarchi – Roma

    • Ritchie Roesch · May 29, 2020

      Thank you! I’ve done noise reduction and sharpening before. Perhaps I should revisit it and some of the other functions. I appreciate the suggestion!

  5. Pingback: [Not] My Fujifilm X100V Classic Negative Film Simulation Recipe | Fuji X Weekly
  6. Pingback: My Fujifilm X100V Cine Teal Film Simulation Recipe | Fuji X Weekly
  7. Pingback: Fujifilm X100V Film Simulation Recipe: Fujicolor Superia 100 | Fuji X Weekly
  8. Pingback: Fujifilm X100V Film Simulation: Kodak Portra 400 | Fuji X Weekly
  9. Pingback: Fujifilm X100V New Feature: B&W Toning | Fuji X Weekly
  10. Pingback: Fujifilm X100V Film Simulation Recipe: Kodak Tri-X 400 | Fuji X Weekly
  11. Pingback: Fujifilm X100V New Feature: Color Chrome Effect Blue | Fuji X Weekly
  12. Pingback: Fujifilm X100V Film Simulation Recipe: Bleach Bypass | Fuji X Weekly
  13. Pingback: Fujifilm X100V Film Simulation Recipe: The Rockwell (Velvia) | Fuji X Weekly
  14. Pingback: Fujifilm X100V Film Simulation Recipe: Fujicolor Superia 800 | Fuji X Weekly
  15. Pingback: Film Simulation Recipe Compatibility: X-Trans IV | Fuji X Weekly
  16. Pingback: Fujifilm X100V Film Simulation Recipe: Kodak Ultramax 400 | Fuji X Weekly
  17. Pingback: Fujifilm X100V Film Simulation Recipe: Kodak Ektar 100 | Fuji X Weekly
  18. Pingback: Review: Fujifilm X100V – Like Shooting With An Endless Roll of Film | Fuji X Weekly
  19. Pingback: Fujifilm White Balance Shift: What It Is + How To Use It | Fuji X Weekly
  20. Pingback: Fujifilm X100V Film Simulation Recipe: Verano Tostado | Fuji X Weekly
  21. Pingback: Fujifilm X100V Film Simulation Recipe: Kodachrome 1 | Fuji X Weekly
  22. Pingback: Fujifilm X100V Film Simulation Recipe: Agfa Vista 100 | Fuji X Weekly
  23. Pingback: Fujifilm X100V Film Simulation Recipe: Kodak Portra 400 v2 | FUJI X WEEKLY
  24. Pingback: Medium Format vs Crop Sensor: How Much Better is Fujifilm GFX than Fujifilm X? | FUJI X WEEKLY
  25. Pingback: New Nostalgic Negative Film Simulation + X-Trans IV Nostalgic Negative Recipe! | FUJI X WEEKLY
  26. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Creamy Color | FUJI X WEEKLY
  27. Andrew Hawley · April 1, 2021

    Hi there Ritchie. Say, your app is excellent of course. What fun for me and so many others. Than you sir fir the outstanding work. A tiny little idea that might be helpful, perhaps add an a,b,c or 1,2,3 after those recipes that are named the same. When i select one to look at, and then go back to the main list to select another one by the same name, i keep forgetting which one i just looked at. Basically it might just be me and my lack of brain function. Hey, Happy Easter.

    • Ritchie Roesch · April 1, 2021

      Thank you for the suggestion! There are several great improvements coming to the app, hopefully during summertime, that will make it even better.

  28. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Eterna v2 | FUJI X WEEKLY
  29. Pingback: Fujifilm X100V (X-Trans IV) Film Simulation Recipe: Fujicolor Negative | FUJI X WEEKLY
  30. Pingback: Fujifilm X100V (X-Trans IV) Film Simulation Recipe: Fujicolor Pro 400H | FUJI X WEEKLY
  31. Pingback: Fujifilm X-E4 (X-Trans IV) Film Simulation Recipe: Grizzly Ride | FUJI X WEEKLY
  32. Pingback: Fujifilm X-Trans IV (X-Pro3, X100V, X-T4, X-S10 & X-E4) Film Simulation Recipe: Fujicolor NPS 160 Pulled | FUJI X WEEKLY
  33. Pingback: Fujifilm X-E4 (X-Trans IV) Film Simulation Recipe: Positive Film | FUJI X WEEKLY
  34. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Kodak Portra 400 Warm | FUJI X WEEKLY
  35. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Fujicolor Super HG (Part 1 of 3) | FUJI X WEEKLY
  36. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Super HG Astia (Part 3 of 3) | FUJI X WEEKLY
  37. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: AgfaChrome RS 100 | FUJI X WEEKLY
  38. J.A. Jansen · September 1, 2021

    What I first didn’t know was that clarity slows down the storing of the image a bit. I found this out when I switched from a x100f to a x100v. Don’t you mind the slowing down, or is there a fix? Thanks.

    • Ritchie Roesch · September 1, 2021

      I generally don’t mind it. I think of things that slow me down as positive and not negative; however, there are times when quickness is necessary. I’ll switch to a continuous shooting mode, which disables Clarity, and (since I shoot RAW+JPEG) I will reprocess in-camera to add Clarity back into those pictures afterwards. I hope this makes sense and is somehow helpful.

      • Joost · September 6, 2021

        Hi Ritchie, thanks for the reply. Eventually I went the same route as you do, and I think agree with you. The storing-process was just something that threw me off a bit at home when I tested the camera. This weekend I finally had the chance to work the camera in the field and it didn’t bother me anymore. Thanks again!

      • Ritchie Roesch · September 6, 2021

        I’m just happy to be helpful!

      • kyle · June 28, 2022

        Thanks for addressing this! It took me forever to figure out that it was Clarity that was slowing down image storage. I too like slowing down to shoot, but being slowed down by image processing (rather than manual settings) is still a bit of a bummer. Hopefully they’ll fix this in a future firmware update. Great article! Loved the thorough breakdown.

      • Ritchie Roesch · June 29, 2022

        I’ve been hoping that the lag would be addressed via firmware, but so far no. Maybe it’s not as much on the X-Trans V? Interestingly, the GFX 50S (and I assume the R, too) has a similar lag… except it doesn’t have Clarity. I appreciate your kindness!

  39. Pingback: Fujifilm X100V (X-Trans IV) Film Simulation Recipe: Pulled Fujicolor Superia | FUJI X WEEKLY
  40. Pingback: Fujifilm X-E4 (X-Trans IV) Film Simulation Recipe: Silver Summer | FUJI X WEEKLY
  41. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Elite Chrome 200 | FUJI X WEEKLY
  42. Pingback: Fujifilm X-E4 (X-Trans IV) Film Simulation Recipe: Ferrania Solaris FG 400 | FUJI X WEEKLY
  43. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Retro Gold | FUJI X WEEKLY
  44. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Retro Gold Low Contrast | FUJI X WEEKLY
  45. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Fujicolor NPH | FUJI X WEEKLY
  46. Shannon Vanderhill · September 30, 2022

    Hey! Thanks for all you do! I just ordered my X-T4 + 35mm f2 lens. I’ll be a primarily jpeg/SOOC user taking photos of my family and trips. Skin softness in portraits is very important to me! I’m curious what you think about not using the clarity setting (to avoid slow down), but rather using a diffusion filter (Tiffen Black Pro Mist 1/8 for instance) to achieve a soft skin look? That’s what I’m going to experiment with but would love to hear your thoughts!

    • Ritchie Roesch · October 1, 2022

      Diffusion filters like Black Pro Mist can be used to replace negative Clarity. I think 1/8 is roughly equal to -1 or -2 Clarity, 1/4 is similar to -3 or -4, and 1/2 is more like -5 Clarity. What I don’t like about Black Pro Mist is that they add a slight reddish cast, so you might want to adjust the WB Shift a little to compensate—I personally prefer the Moment CineBloom filters because they don’t add a color cast.

Leave a Reply