The Fuji X Weekly app has the ability, for Patrons, to filter by Camera or Sensor. It might seem most obvious to pick your camera, but that might not be the best choice. Why? Let me explain.
With each recipe, I only included the cameras that are 100% compatible with that recipe. There are many situations where a recipe is 99% compatible. For example, the Fujifilm X-T4, X100V, X-Pro3 and X-S10 aren’t 100% compatible with X-Trans IV recipes intended for the X-T3 and X-T30, despite having the same sensor. Why? Because the X-T3 and X-T30 models don’t have an option for Grain size, so you’ll have to decide for yourself if it should be Small or Large, and also B&W Toning is different. Because of this, recipes like Kodak Gold 200, Eterna, Kodacolor, and many, many, many more won’t show up if you filter by X-Pro3, for example. They will, however, show up if you filter by X-Trans IV sensor. If you have an X-Pro3, if you filter by Sensor instead of Camera, you’ll see a lot more recipes. In fact, you could filter by both X-Trans III and X-Trans IV!
It’s a similar story if you have, for example, a Fujifilm X-E2. X-Trans I and Bayer recipes will work on your camera, but they’ll look a little different. Those recipes won’t show up if you filter by Camera, but they will if you filter by X-Trans I, X-Trans II and Bayer.
If you have an X-Trans III camera, it makes more sense to filter by Camera because all of the recipes that are compatible will appear (including X-Trans IV recipes that are also compatible). If you have an X-Trans IV camera, it makes more sense to filter by Sensor; however, the X-T3 and X-T30 are an exception, and like X-Trans III, it makes more sense to filter by Camera if you have either of these models. X-Trans II is a mixed bag because not every camera has the same film simulations, so if your model doesn’t have Classic Chrome and the PRO Neg. options, it will be better to filter by Camera, but otherwise by Sensor so that you can also access the X-Trans I and Bayer sensors. X-Trans I and Bayer cameras have a similar limitation (not all models have all of the film simulations), so filtering by Camera will reveal what’s for certain compatible, and filtering by Sensor will reveal what may or might not be compatible.
I hope this isn’t too confusing. My recommendation is to try both filtering options, and decide what makes the most sense for you.