Fujifilm X100V Film Simulation Recipe: Kodak Portra 400 v2

Sage Sunset – Antelope Island SP, UT – Fujifilm X100V – “Kodak Portra 400 v2”

One film can have many different looks depending on how it’s shot, developed, scanned or printed. This new Portra 400 film simulation recipe, called Kodak Portra 400 v2, is an alternative aesthetic, created by studying examples of actual Portra 400 film (thanks to Julien Jarry). The “other” Fujifilm X100V Kodak Portra 400 recipe was also created by studying examples of actual film (thanks to Thomas Schwab). They’re both good options for achieving a Portra look, and neither is more “right” than the other.

This isn’t exactly a brand-new recipe. It was published as a Patron early-access recipe on the Fuji X Weekly App back on December 1st, and now another early-access recipe has replaced it, so this one is now available to everyone! You might remember that this Kodak Porta 400 v2 recipe was mentioned in the Kyle McDougall preset comparison article.

Ford Truck – Centerville, UT – Fujifilm X100V – “Kodak Portra 400 v2”

If you like my other Portra recipes, you’re sure to like this one, too. Because it uses Clarity, it slows down the camera considerably. I hope that Fujifilm speeds this up with a firmware update at some point, but in the meantime, if you can, my recommendation is to embrace the slowdown. This recipe is only compatible with the latest Fujifilm X cameras: the X-Pro3, X100V, X-T4 and X-S10.

Classic Chrome
Dynamic Range: DR400
Highlight: 0
Shadow: -2
Color: +2
Noise Reduction: -4
Sharpening: -2
Clarity: -2
Grain Effect: Strong, Small
Color Chrome Effect: Strong
Color Chrome Effect Blue: Weak
White Balance: 5200K, +1 Red & -6 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: +1/3 to +1 (typically)

Example photographs, all camera-made JPEGs using this new Kodak Portra 400 v2 film simulation recipe on my Fujifilm X100V:

Stacked Pallets – Farmington, UT – Fujifilm X100V
Now Hiring – Centerville, UT – Fujifilm X100V
Double-Double – Centerville, UT – Fujifilm X100V
Burger Roof – Centerville, UT – Fujifilm X100V
Julien Jarry with RED Camera – Antelope Island SP, UT – Fujifilm X100V
Julien Filming – Antelope Island SP, UT – Fujifilm X100V
Yellow Rabbitbrush – Antelope Island SP, UT – Fujifilm X100V
Frary Peak Peeking – Antelope Island SP, UT – Fujifilm X100V
Desert Brush – Antelope Island SP, UT – Fujifilm X100V
Light Log – Big Fork, MT – Fujifilm X100V
Sunlight Through the Forest Trees – Big Arm, MT – Fujifilm X100V
One Lane Bridge – Big Fork, MT – Fujifilm X100V
String of Lightbulbs – Flathead Lake, MT – Fujifilm X100V
Dock at Night – Flathead Lake, MT – Fujifilm X100V
Moon Over RV – Antelope Island SP, UT – Fujifilm X100V
Sunset RED – Antelope Island SP, UT – Fujifilm X100V
Buffalo Point Sunset – Antelope Island SP, UT – Fujifilm X100V

See also: Film Simulation Recipes

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black    Amazon   B&H
Fujifilm X100V Silver   Amazon   B&H


Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!



  1. Roger Solbakke · December 30, 2020

    It looks great. I look forward to try it. No I use Kk 64 and Bright Summer a lot and this one is an alternative. I should like more b&w 😬 I wish you and your family a very happy new year
    Best regards Roger

    • Ritchie Roesch · December 30, 2020

      Thanks so much! I think a lot of people are going to really appreciate this one. Report back what you think once you’ve had a chance to use it. You have a happy New Year, too!

  2. Pingback: New Patron Early-Access Recipe: Kodak Portra 400 Warm | FUJI X WEEKLY
  3. Khürt Williams · January 1, 2021

    Love the colours.

  4. benedict · January 5, 2021

    Just got the X100F.. Any chances you’d make a Portra 400 V2 on that one? Thanks!

  5. Carn Patrick · January 9, 2021

    Just a quick word about the Clarity slowing down the camera. If you save your preset as normal you can simply switch the drive mode to one of the burst settings and Clarity will be deactivated automatically on all presets. I’ve added a 1/8 Tiffen Black Pro-Mist filter to my X100V which kind of adds a bit of a film look/clarity anyway. It works really well! I imagine a 1/4 filter would be really nice but possibly too strong for some tastes.

    • Ritchie Roesch · January 10, 2021

      Going negative on Clarity is a lot like using a Pro Mist filter, I’m thinking 1/8 or 1/4 is probably the best choices. I appreciate the tips!

  6. Jimmy · January 11, 2021

    Love this recipe, been interesting to see how it differs from the original look. I’ve also tried to replicate another Portra 400 look recently – the trendy one you see from plenty of analog photographers these days with pastel blues and cotton candy pink. I’ve tried using https://www.reddit.com/r/analog/comments/krx9vf/leica_m2_portra_400/ and https://www.reddit.com/r/analog/comments/ktj21m/winter_wonderland_yashica_t5_35mm_portra_400/ as a reference. I’m pretty sure that there’s editing involved with these, but I have tried to replicate it with little success. I’ve tried pinkish white balance shifts on classic chrome but it doesn’t look right, do you have any tips/ideas?

    • Ritchie Roesch · January 11, 2021

      That first picture of the blue buildings in the snow, is either pushed or (more likely) edited with software. The second picture, that one seems possible to replicate. I’ll work on it and see if I can come up with something. I appreciate the suggestion, thanks!

      • Jacob Juul · August 28, 2022

        It’s not pushed or edited. I have the negative if you want me to show it in some way.

      • Ritchie Roesch · August 29, 2022

        I appreciate the input—straight from the source! Do you mind sharing the technical details of how you shot and processed it?

  7. CEN DAI · January 18, 2021

    Hi! “Because it uses Clarity, it slows down the camera considerably. ” I can’t understand what slows down which function of the camera? Thanks!

    • Ritchie Roesch · January 18, 2021

      When you use Clarity the camera takes an extra second or two to save the image to the memory card.

      • Jacob Juul · September 4, 2021

        I acutally took that first picture in the snow. It’s not editied, but it’s scanned on my Fuji Frontier sp-3000

  8. Pingback: Fujifilm GFX100S | FUJI X WEEKLY
  9. Pingback: New Nostalgic Negative Film Simulation + X-Trans IV Nostalgic Negative Recipe! | FUJI X WEEKLY
  10. Christian · March 15, 2021

    Hey! So I am curious. Since I have a 1/4 promist on my x100V, do turn off the clarity functions or…?

    • Ritchie Roesch · March 15, 2021

      I would say, for negative Clarity, the Pro Mist filter pretty much accomplishes the same thing. So you can set Clarity to 0 for those recipes that call for a negative Clarity.

  11. Pingback: Travel: 10 Film Simulation Recipes in Arizona | FUJI X WEEKLY
  12. Pingback: Fujifilm X-Trans IV Film Simulation Recipe: Vintage Vibes | FUJI X WEEKLY
  13. Pingback: Best Fujifilm Film Simulations | FUJI X WEEKLY
  14. Pingback: The Journey is the Destination, Part 3: Lodging Locations | FUJI X WEEKLY
  15. Gerardo Reyes · July 9, 2021

    so in order to use the recopies correctly, would you say is best to leave shutter speed in auto and the iso in auto ?

    • Ritchie Roesch · July 13, 2021

      That’s how I shoot most of the time (aperture priority), but not always. There’s no right or wrong way. In manual mode, use the “typical” exposure compensation as a guide of how much to decrease or increase from what the meter suggests, but know that this is just a general guide and not a rule; each exposure should be judged individually. I hope this helps!

  16. Pingback: Fujifilm X-T3 & X-T30 Film Simulation Recipe: Kodak Portra 400 v2 | FUJI X WEEKLY
  17. Brrrr · September 4, 2021

    Love this recipe, but having trouble at night shooting indoor in my own place (way too “yellow”). Is there any recommendation on how to adjust perhaps WB or sth else to get better result?
    Also, are there specific recipes that’s best suited for indoor shooting in your opinion?

    • Ritchie Roesch · September 4, 2021

      Back in the film days I carried warming and cooling filters to change the “white balance” of the film when shooting in various lighting situations. You could do that, but much more practically speaking, you could adjust the WB to Auto or one of the Fluorescent or Incandescent options instead, to get better results in that situation.

      • Brrrr · September 20, 2021

        Thank you very much, Ritchie. Just a follow up question on WB, so the reason some of the recipes (like this one) choose a specific WB setting instead of auto is to more closely mimic the film property?

      • Ritchie Roesch · September 20, 2021

        That’s exactly right! Although truly faithfully mimicking any film in all situations is impossible, but I try to get as close as I can.

      • alex · February 1, 2022

        I was looking for guidance and was glad to find it in this thread. I discovered this recipient via someone’s photos on Instagram. So other than loosing the purity/nostalgia that comes with a fixed white balance there is not really a down side to go with auto? E.g during daylight and outside I could expect similar results to the fixed value? Jus lt trying to gage the impact since I rather enjoy using the recipes without adjusting them in the fly. Thank you for sharing these!

      • Ritchie Roesch · February 1, 2022

        In Daylight conditions, Auto will produce similar (but not identical) results. If you try it and like it and it works for you, definitely don’t be afraid to use Auto.

      • Joel Augustine · November 28, 2022

        just following up on this. if we were to switch the wb to auto for these kind of situations should we carry over the color shift from the kelvin setting or just keep it at the default values (0,0)

      • Ritchie Roesch · November 28, 2022

        If you don’t like the color cast in a certain light condition, and you don’t want to use Color Correction Filters or try a different recipe, you can use AWB… I’d start with the WB Shift first, and if that still doesn’t give you the results you want, try adjusting the shift until it looks right to you. I say all of this like there are some sort of “rules” but there aren’t—it’s about finding what works best for you. Definitely don’t be afraid to “season to taste” any recipe to make it work better for you.


  18. Pingback: Fujifilm X-E4 (X-Trans IV) Film Simulation Recipe: Portra-Style | FUJI X WEEKLY
  19. Pingback: History & Poetry of Kodachrome | FUJI X WEEKLY
  20. Pingback: History and poetry of Kodachrome - Photography
  21. Pingback: Historical past and poetry of Kodachrome – hqwallbase
  22. Pingback: History and poetry of Kodachrome – Fealse
  23. Pingback: History and poetry of Kodachrome – Camorabug
  24. Pingback: Historical past and poetry of Kodachrome – Piecingustogether
  25. Pingback: History and poetry of Kodachrome - ThatsMyTool
  26. Pingback: No Edit Photography: 7 Tips To Get The Film Look From Your Digital Photos | FUJI X WEEKLY
  27. Pingback: Fujifilm X-E4 (X-Trans IV) Film Simulation Recipe: Ferrania Solaris FG 400 | FUJI X WEEKLY
  28. Pingback: Creative Collective 002: When Film Simulation Bracket Is Actually Useful | FUJI X WEEKLY
  29. Wasan · November 11, 2021

    This is amazing! I would love to know if this simulation will work on an XT-200?

    • Ritchie Roesch · November 11, 2021

      No, it sure won’t. The X-T200 doesn’t have Grain Effect, Clarity, Color Chrome Effect, or Color Chrome Effect Blue, which this recipe calls for. Sorry.

  30. Pingback: Best Film Simulation Recipes for Portraits (Video) | FUJI X WEEKLY
  31. Pingback: Fuji X Weekly: Top 21 Articles of 2021 | FUJI X WEEKLY
  32. Odditty (@odditty_me) · April 25, 2022

    Love this recipe 👍! Here are some shots I took with it on the Fujifilm X-T4 📷 … https://youtu.be/tyRt5Imr_oM .

  33. Pingback: Kodak Portra for a Classic Soft Look – Film Recipes for Fujifilm X-Trans 4 cameras
  34. Pingback: Kodak Portra Grainy for a Portra 400 Look – Film Recipes for Fujifilm X-Trans 4 cameras
  35. Pingback: Kodak Portra 66 for Summer Road Trips – Film Recipes for Fujifilm Cameras
  36. Pingback: Kodak Portra SW19, for Soft Wimbledon Tones – Film Recipes for Fujifilm Cameras
  37. Pingback: Aged Kodak Portra, for Old Tones 35mm – Film Recipes for Fujifilm Cameras
  38. Pingback: Ultrasoft 77, for Mellow Low Contrast Style – Film Recipes for Fujifilm Cameras
  39. Pingback: Toasty Chrome, Warm & Retro Chrome – Film Recipes for Fujifilm Cameras
  40. Alex Malm · October 31, 2022

    I used to run a Pakon scanner shooting portra 400 at EI 200 ASA. Then I would add a touch of warmth in LR. This recipe here reminds me of that. Nice job!

    • Ritchie Roesch · October 31, 2022

      Awesome! Thanks for letting me know. 😀

  41. Pingback: Kodak Portra Pro, Portra 400 Film Recipe – Film Recipes for Fujifilm Cameras
  42. Alexander · November 7, 2022

    Hi! What should I do if I want to shoot with this “film” in the evening or under the artificial light? Will the fixed 5200K still work well?

  43. Pingback: Ritchie’s Kodak Portra 400 v2 – Cooking Fuji Recipes
  44. Pingback: Smells like summer – Life, Unintended

Leave a Reply