White Sands | FUJI X WEEKLY

10 Frames: Infrared in the Desert — White Sands National Park with Aerochrome v2

Posted on January 20, 2025 by Ritchie Roesch

*Red Yucca in the White Sand* – White Sands NP, NM – Fujifilm X-T4 ES – Aerochrome v2

A few weeks back, in-between Christmas and New Years, I briefly stopped in White Sands National Park in southern New Mexico for a couple of hours. Since it was the holiday season, the park was very crowded. There were so many cars, and people were everywhere! It was difficult to capture images without someone somewhere in the frame, and it was nearly impossible to find scenes without footprints.

My main objective for this stop was to photograph the White Sands with the Fujifilm GFX100S II at golden hour, with the hope of achieving one or two good XPan pictures. Secondarily, I wanted to create a few images with my Fujifilm X-T4 ES full spectrum infrared camera. I love using this camera, especially for the unusual pictures that it makes. My favorite Film Simulation Recipe for the X-T4 ES is Aerochrome v2, which I’ve used coast-to-coast and many places in-between, so that is what I chose for the White Sands.

The 10 frames in this article were made during about a two hour window in White Sands National Park using my Fujifilm X-T4 ES camera with a Fujinon 35mm f/2 lens and the Aerochrome v2 Recipe. It was partly overcast. Winter probably isn’t the best time to do infrared photography at this location, since much of the vegetation is dormant. Still, I came away with a couple good pictures, so I’m happy. But I know that I need to revisit the White Sands—hopefully next time I can dedicate a little more time to it. In the meantime, I hope that you enjoy these pictures.

*Pink Brush* – White Sands NP, NM – Fujifilm X-T4 ES – Aerochrome v2

*Yucca on a Sand Hill* – White Sands NP, NM – Fujifilm X-T4 ES – Aerochrome v2

*Yucca & Brush* – White Sands NP, NM – Fujifilm X-T4 ES – Aerochrome v2

*Yucca at the Top of a Hill* – White Sands NP, NM – Fujifilm X-T4 ES – Aerochrome v2

*Yucca Hanging Over* – White Sands NP, NM – Fujifilm X-T4 ES – Aerochrome v2

*Bush in the Sand* – White Sands NP, NM – Fujifilm X-T4 ES – Aerochrome v2

*Desert Yucca* – White Sands NP, NM – Fujifilm X-T4 ES – Aerochrome v2

*Infrared Yucca* – White Sand NP, NM – Fujifilm X-T4 ES – Aerochrome v2

10 Frames in New Mexico — Fujifilm GFX100S II XPan Photographs

Posted on December 30, 2024 by Ritchie Roesch

*Sand & Sky* – White Sands NP, NM – Fujifilm GFX100S II – Fujicolor PRO 160C Warm

The main reason why I purchased a Fujifilm GFX100S II camera a couple of weeks ago was for XPan photography. For those who don’t know, XPan cameras were a joint venture between Hasselblad and Fujifilm in the late-1990’s through the mid-2000’s, right at the pinnacle of film. XPan models were interchangeable-lens rangefinder cameras that used approximately two frames of 35mm film to capture panoramic pictures in a 65:24 aspect ratio.

You can crop images from any model to the XPan ratio without much trouble, but composing it in-camera is different than doing it after-the-fact because you can better visualize the outcome. Also, I prefer straight-out-of-camera photography over sitting at a computer editing, but that’s just me. All GFX models, including the GFX100S II, have the 65:24 aspect ratio built-in; however, X-series cameras do not (in my opinion, Fujifilm should add the XPan ratio to all of their 40mp cameras via a firmware update). If you are serious about XPan photography and you use Fujifilm cameras, GFX is the preferable route.

*Sand Wall* – White Sands NP, NM – Fujifilm GFX100S II – Velvia Film

Since the 65:24 aspect ratio cuts out about half of the resolution, having a high-megapixel sensor is important. With that said, you can’t truly appreciate XPan when viewing on a computer or your phone. XPan from a GFX100S II isn’t going to look any more impressive than (for example) an XPan crop from a Fujifilm X-T10. These pictures need to be printed to be appreciated, and that’s my goal. I plan to print a couple of these to see what they look like, and if I create any in the future that are worthy, I hope to make some really large prints that are two-feet tall by five-feet-five-inches wide. For that, the 100mp sensor of the GFX100S II is essential.

All of these photographs, which were captured yesterday and the day before in New Mexico, were made using a Fujifilm GFX100S II camera with a Fujinon 80mm f/1.7 lens. These pictures are camera-made JPEGs using a few different Film Simulation Recipes. Over the coming days and weeks I’ll be testing various Recipes to see what works best on GFX, and I’ll be sure to share the results with you, so stay tuned! In the meantime, I hope that you enjoy these 10 XPan images.

*Cars* – Tularosa, NM – Fujifilm GFX100S II – Fujicolor 100 Gold

*House Fire* – Lordsburg, NM – Fujifilm GFX100S II – 1970’s Summer

*Yucca in the Sand* – White Sands NP, NM – Fujifilm GFX100S II – Velvia Film

*Yucca and Grass*– White Sands NP, NM – Fujifilm GFX100S II – Velvia Film

*Sandscape* – White Sands NP, NM – Fujifilm GFX100S II – Fujicolor PRO 160C Warm

*Dune Brush* – White Sands NP, NM – Fujifilm GFX100S II – Fujicolor PRO 160C Warm

*Sunset Behind Brush* – White Sands NP, NM – Fujifilm GFX100S II – Velvia Film

*Sand at Sunset* – White Sands NP, NM – Fujifilm GFX100S II – Velvia Film

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm GFX100S II:
Amazon, B&H, Wex
Fujinon GF 80mm f/1.7:
Amazon, B&H, Wex