A Different Approach + 7 New Fujicolor Pro 160NS Film Simulation Recipes! (Yes, 7!)

Pink Paper Blossom – Farmington, UT – Fujifilm X-T30 – “Fujicolor Pro 160NS Pulled +2”

I received an email the other day from Anders Lindborg with this subject title: A Different Approach. Anders created the Kodak Tri-X 400 film simulation recipe, which is my personal favorite for black-and-white photography. I was immediately intrigued, and I was not disappointed as I read his message. I’ll let Anders explain this new approach below as he described it to me.

“Doing professional work is tough. Since getting a Fujifilm X-T3 (and later an X-Pro3), I’ve come to rely totally on the straight-out-of-camera JPEGs. They look great and I get more jobs just because I can deliver good results fast. After diving deep into the Fujifilm film simulations, I’ve come to realize that you cannot create a single recipe that will always look great. Sometimes the sunlight is so strong that everything gets blown out and the next day the same recipe will make everything look murky and dull.”

“Coming from a film background, I’m reasonably used to pushing and pulling film as needed. With cheap consumer film stocks, you could sometimes get absolutely horrific (or ”creative” as some call them) results, but the professional films were often quite predictable. Some film stocks have become legendary because they really could take a good beating, no matter how you treated them. Also, the exposure latitude of film is insane compared to digital, which is something I really have missed since switching. Awhile back I started experimenting with recreating this, but I slowly realized that it would require several different variations of my settings. When I was finished, I had used up all seven slots! A lot of research and assumptions went into the process. For example, I totally assume that Fujifilm knows what they’re doing and that their stock simulations are good. I can honestly say after all this, that—yes—they do know their game!”

“The settings emulate a flexible film look. They serve as a base that can be modified as needed on the spot via the Q Menu (for example: changing film simulation, white balance, tint, dynamic range, etc.). The objective was to always have working settings for any scenario that emulates how professional film behaves when being pushed or pulled. They’re intended for professional use and come out of both a need and want for realistic film-like simulations that are guaranteed to work, no matter what task I’m currently challenged with. Of course it’s up to the end user to tune it to their specific preferences, but I strongly recommend you leave the highlight/shadow settings as-is. They are heavily tested with all standard film simulations and you will get a nice looking result with them. These settings took me a couple of years to develop, but this is what I actually use every day now.”

“Just step outside and try to come to a conclusion about what the current weather and light conditions are like. If the sun is harsh, you need to pull. If the sun is blindingly bright, pull two steps. The same goes for pushing. If you’re missing just a bit of light, push one step. If it’s dull, push two steps. The third and fourth push settings are perhaps a bit special as the contrast starts to increase. On a regular day, of course you use the box speed setting. Once you’ve selected your setting for the day, stick with it! This is the key to consistent results.”

“I recommend shooting RAW+JPEG and having the settings stored in X Raw Studio. RAWs are great to have if you aren’t happy with the results of your selected setting. The settings were created for the Fujifilm X-T3, but can be easily adapted to taste on any X-series camera. On my X-Pro3, I set Clarity to -3 and Grain to Weak & Large on all slots.”

Thank you, Anders Lindborg, for creating and sharing this new approach!

Pink Rose – Farmington, UT – Fujifilm X-T30 – “fujicolor Pro 160NS Pulled -1”

For those without a film background, let me briefly explain what pushing and pulling means in film photography. Film is rated at a certain ISO, for example ISO 100, ISO 200, ISO 400, etc., which is a measurement of the film’s sensitivity to light (it’s pretty much just like on your digital camera). You can underexpose a roll of film and increase the development time to get correctly exposed pictures, and this is called push-processing or pushing the film. Also, you can overexpose a roll of film and decrease the development time to get correctly exposed pictures, and this is called pull-processing or pulling the film. Pushing the film increases the contrast, vibrancy (for color film), and grain, while pulling the film decreases the contrast, vibrancy (for color film), and grain. With film, you have to push or pull the entire roll and not just one or a few frames.

The genius of Anders’ method is that you can apply this film approach to your digital pictures, and you can do it with as few or as many frames as you wish. You can push one frame, pull the next, and shoot the third at “box speed” (nether pushed nor pulled) if you want. This type of flexibility was unimaginable in the film era!

In case you didn’t understand this approach, let me rephrase it. You have one recipe, but that recipe has push and pull variants. You can use any film simulation with the recipe, and Anders’ film simulation of choice is PRO Neg. Hi, but try any of them! The rest of the settings stay the same. His push and pull variants don’t necessarily represent stops of pushing or pulling, but more like half-stop increments (although Fujifilm lenses have 1/3 stop increments, but don’t worry about that). You can dedicate slots in your Custom Settings Menu for the recipe and variants, or you can have one Custom Settings slot set to the standard “box speed” recipe and adjust on-the-fly if you have the required changes memorized, or you can do it in X RAW Studio.

Anders actually sent me two recipes. The first, which you’ll find below, is called Fujicolor Pro 160NS. It wasn’t purposely intended to resemble that film, but it nonetheless does, more-or-less. The second, which you can find here), is called Fujicolor Pro 400H. The Pro 160NS recipe is the “standard” one, while the Pro 400H recipe is just a little more bold for when you need a bit more pizzaz.

There are seven versions of the Fujicolor Pro 160NS recipe: Pulled -2, Pulled -1, Box Speed, Pushed +1, Pushed +2, Pushed +3, and Pushed +4. You’ll find each of these below, although the Box Speed version is the only one included on the Fuji X Weekly app. My recommendation is to manually add the other versions into the notes section under the recipe in the app. These seven recipes are compatible with X-Trans III cameras plus the X-T3 and X-T30; for newer cameras Anders recommends setting Clarity to -3 and Grain to Weak & Large. As a reminder, these recipes are intended to look good no matter the film simulation used, despite it calling for PRO Neg. Hi. For Pushed +3 and Pushed +4, feel free to use Grain Strong if you’d like.

Fujicolor Pro 160NS Box Speed

Two Broken Cars – Uintah, UT – Fujifilm X-T30

PRO Neg. Hi
Dynamic Range: DR400
Highlight: 0
Shadow: 0
Color: 0
Color Chrome Effect: Off
Grain: Weak
Noise Reduction: -4
Sharpness: -3
White Balance: Daylight, 0 Red & 0 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: 0 to +2/3 (typically)

Old Railroad Sign – Farmington, UT – Fujifilm X-T30
Rainy Day Railroad – Uintah, UT – Fujifilm X-T30
Hazy Mountain & Red Helicopter – Farmington, UT – Fujifilm X-T30

Fujicolor Pro 160NS Pulled -1

Clouds Over Green Mountain – Uintah, UT – Fujifilm X-T30

PRO Neg. Hi
Dynamic Range: DR400
Highlight: -1
Shadow: -1
Color: 0
Color Chrome Effect: Off
Grain: Weak
Noise Reduction: -4
Sharpness: -3
White Balance: Daylight, 0 Red & 0 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: 0 to +2/3 (typically)

If you are adding this recipe to the Notes in the app, consider using this abbreviation: Pulled -1: HL & SH -1.

Cryo-Trans – Uintah, UT – Fujifilm X-T30
Jonathan – Farmington, UT – Fujifilm X-T30
Orange Flower – Farmington, UT – Fujifilm X-T30

Fujicolor Pro 160NS Pulled -2

Trailer Interior – Uintah, UT – Fujifilm X-T30

PRO Neg. Hi
Dynamic Range: DR400
Highlight: -2
Shadow: -1
Color: -1
Color Chrome Effect: Off
Grain: Weak
Noise Reduction: -4
Sharpness: -3
White Balance: Daylight, 0 Red & 0 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: 0 to +1 (typically)

If you are adding this recipe to the Notes in the app, consider using this abbreviation: Pulled -2: HL -2, SH -1, CLR -1.

Not Driven – Uintah, UT – Fujifilm X-T30
Americana Country – Farmington, UT – Fujifilm X-T30
Uncertain Walking Path – Farmington, UT – Fujifilm X-T30

Fujicolor Pro 160NS Pushed +1

Green Tree & Storm Clouds – Farmington, UT – Fujifilm X-T30

PRO Neg. Hi
Dynamic Range: DR400
Highlight: +1
Shadow: 0
Color: 0
Color Chrome Effect: Off
Grain: Weak
Noise Reduction: -4
Sharpness: -3
White Balance: Daylight, 0 Red & 0 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: 0 to +2/3 (typically)

If you are adding this recipe to the Notes in the app, consider using this abbreviation: Pushed +1: HL +1.

Garden Blooms – Farmington, UT – Fujifilm X-T30
F’n’R – Uintah, UT – Fujifilm X-T30
Boy Smile – Farmington, UT – Fujifilm X-T30

Fujicolor Pro 160NS Pushed +2

Worn Seat Abstract – Uintah, UT – Fujifilm X-T30

PRO Neg. Hi
Dynamic Range: DR400
Highlight: +2
Shadow: 0
Color: +1
Color Chrome Effect: Off
Grain: Weak
Noise Reduction: -4
Sharpness: -3
White Balance: Daylight, 0 Red & 0 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: -1/3 to +2/3 (typically)

If you are adding this recipe to the Notes in the app, consider using this abbreviation: Pushed +2: HL +2, CLR +1.

Shasta Trailers – Uintah, UT – Fujifilm X-T30
Onions in Bloom – Farmington, UT – Fujifilm X-T30
Flowering Bush – Farmington, UT – Fujifilm X-T30

Fujicolor Pro 160NS Pushed +3

Branches Over Creek – Farmington, UT – Fujifilm X-T30

PRO Neg. Hi
Dynamic Range: DR400
Highlight: +2
Shadow: +1
Color: +2
Color Chrome Effect: Off
Grain: Weak
Noise Reduction: -4
Sharpness: -3
White Balance: Daylight, 0 Red & 0 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: -1/3 to +2/3 (typically)

If you are adding this recipe to the Notes in the app, consider using this abbreviation: Pushed +3: HL +2, SH +1, CLR +2.

Two Cows – Farmington, UT – Fujifilm X-T30
Green Leaves – Farmington, UT – Fujifilm X-T30

Fujicolor Pro 160NS Pushed +4

Wet Leaves – Farmington, UT – Fujifilm X-T30

PRO Neg. Hi
Dynamic Range: DR400
Highlight: +3
Shadow: +2
Color: +3
Color Chrome Effect: Off
Grain: Weak
Noise Reduction: -4
Sharpness: -4
White Balance: Daylight, 0 Red & 0 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: -1/3 to +2/3 (typically)

If you are adding this recipe to the Notes in the app, consider using this abbreviation: Pushed +4: HL +3, SH +2, CLR +3, SHARP -4.

Forest – Farmington, UT – Fujifilm X-T30
Wall Shelf – Farmington, UT – Fujifilm X-T30
Yellow Bike – Farmington, UT – Fujifilm X-T30

Below are examples of using the Fujicolor Pro 160NS Box Speed recipe using other film simulations. You can do this with all of the pull and push variants, too, although I didn’t supply any examples of those because this article is already very long.

PRO Neg. Hi “Box Speed”
Provia “Box Speed”
Velvia “Box Speed”
Astia “Box Speed”
Classic Chrome “Box Speed”
PRO Neg. Std “Box Speed”
Eterna “Box Speed”
Acros “Box Speed”
Monochrome “Box Speed”

Find this film simulation recipe on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

Fujifilm X-Trans IV Film Simulation Recipe: Kodak Portra 800 v2

Flower in a Tree – Farmington, UT – Fujifilm X-E4 – “Kodak Portra 800 v2”

This Kodak Portra 800 v2 recipe is beautiful! It was created by Thomas Schwab, who has made several film simulation recipes published on this website, including Superia Xtra 400, Urban Vintage Chrome, Kodachrome II, Classic Monochrome, B&W Superia, and Monochrome Kodachrome. Thomas has also collaborated on other recipes, playing an important role in getting them right, including Kodak Portra 800, Kodak Ektar 100, Kodachrome 1, Kodak Portra 400, and Kodak T-Max 400. This new Kodak Portra 800 v2 recipe might be his best one yet!

Kodak introduced Portra 800 in 1998. The Portra line has seen a number of revisions and updates over the years, but I couldn’t find any information if the current Portra 800 film is the exact same emulsion from 1998, or if it’s gone through some changes over the years like the ISO 400 and 160 versions. Portra 800 is one of the best options for high-ISO color photography, but I’ve never shot it myself.

Traffic Cone – Farmington, UT – Fujifilm X-E4 – “Kodak Portra 800 v2”

Thomas compared images side-by-side captured with actual Kodak Portra 800 film with images captured with his Fujifilm X-Pro3, making numerous adjustments in X RAW Studio, to achieve this nearly-identical picture aesthetic. He put in a lot of work, and it shows! Thank you, Thomas, for creating this great recipe and for your willingness to share! You’ll find some of Thomas Schwab’s pictures below. This Kodak Portra 800 film simulation recipe is currently compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, and X-E4 cameras.

Classic Chrome
Dynamic Range: DR400
Highlight: 0
Shadow: -2
Color: -4
Noise Reduction: -4
Sharpening: -2
Clarity: -5
Grain Effect: Strong, Small
Color Chrome Effect: Strong
Color Chrome Effect Blue: Strong
White Balance: Daylight, +3 Red & -6 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: -2/3 to +1 (typically)

Example photographs, all camera-made JPEGs using this new Kodak Portra 800 v2 film simulation recipe:

Thomas Schwab

Photograph by Thomas Schwab
Photograph by Thomas Schwab
Photograph by Thomas Schwab
Photograph by Thomas Schwab
Photograph by Thomas Schwab
Photograph by Thomas Schwab
Photograph by Thomas Schwab

Ritchie Roesch

Treetop Sky – Farmington, UT – Fujifilm X-E4
Colorful Trees – Farmington, UT – Fujifilm X-E4
Tree Over Creek – Farmington, UT – Fujifilm X-E4
Log & Flowers – Farmington, UT – Fujifilm X-E4
Log & Trail – Farmington, UT – Fujifilm X-E4
Urban Landscape – Farmington, UT – Fujifilm X-E4
McTrash – Farmington, UT – Fujifilm X-E4
Lobby – Farmington, UT – Fujifilm X-E4
Buckle – Farmington, UT – Fujifilm X-E4
Urban Flower Pot – Farmington, UT – Fujifilm X-E4
Blooms in the City – Farmington, UT – Fujifilm X-E4

Find this film simulation recipe on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

Fujifilm X100V (X-Trans IV) Film Simulation Recipe: Fujicolor Pro 400H

Sun-Kissed Forest – Farmington, UT – Fujifilm X100V – “Fujicolor Pro 400H”

This film simulation recipe is one that I’m particularly excited for because I’ve been after this look for a long, long time. The timeline goes as follows: September 2017 I suggested that Fujifilm should make a Fujicolor Pro 400H Overexposed film simulation, October 2018 I made this same suggestion again, December 2018 I published a Fujicolor Pro 400H film simulation recipe for X-Trans III cameras, February 2020 I made a Fujicolor Pro 400H recipe for X-Trans IV cameras, and February of this year I made a Fujicolor NPH recipe (available as a Patron early-access recipe on the Fuji X Weekly App), which is very similar to Pro 400H (NPH was basically an earlier version of the film). Now, I’ve finally made a Fujicolor Pro 400H recipe that I’m quite pleased with. This is an immediate favorite recipe of mine!

After George Coady shared with me his wonderful Fujicolor C200 recipe, he showed me his initial attempt at a recipe for Pro 400H, which inspired me to try my hands at a better Fujicolor Pro 400H Overexposed recipe using the new JPEG options found on the newer cameras, such as Classic Negative, Color Chrome FX Blue and Clarity. At first glance I was disappointed with my results because it didn’t look exactly like what I was hoping for, but then I realized what I actually had created (which I’ll talk more about in just a moment); however, first let’s briefly discuss the film that this recipe is based on.

Table Tulips – Farmington, UT – Fujifilm X100V – “Fujicolor Pro 400H”

Fujifilm introduced Fujicolor Pro 400H in 2004 and it’s been a popular color negative film ever since. Photographers often overexpose this film by as many as four stops. When overexposed, the film turns from a somewhat ordinary high-ISO (that’s what the “H” stands for in the name) portrait film into something almost magical. Colors become vibrant and pastel. The exact look of overexposed Pro 400H varies, depending on how much overexposed, how developed, and how printed or scanned, and the effect can range from subtle to pronounced, but generally you know overexposed Pro 400H film when you see it.

It was that pastel look that I was hoping to achieve with this recipe, and at first I thought I had failed—it looked more like Pro 400H overexposed by one stop or maybe two, but not three or four where the pastel colors are found. Even though I didn’t get that wonderful pastel aesthetic, the recipe looked really great nonetheless. Still, I wondered if it would be possible to get closer to that overexposed look simply by increasing the exposure. Sure enough, it worked! The two images below are examples of this, with exposure compensation set to a whopping +2 2/3!

Toys on a Chair – Farmington, UT – Fujifilm X100V – “Fujicolor Pro 400H”
Messy Hair – Farmington, UT – Fujifilm X100V – “Fujicolor Pro 400H”

As you can see, there are pastel colors in those two pictures, much like well-overexposed Pro 400H film. Does it closely match the film results? It’s closer than my previous attempts, but it’s not perfect. It’s as close as you’re likely going to get straight-out-of-camera. It’s fun to do this, but you’d have to be pretty brave to shoot a wedding with this much overexposure—I’d do it, but, then again, I’ve sandpapered a camera; I have a history of doing some risky (stupid?) things in the name of art.

What about Fujicolor Pro 400H that’s not overexposed? Can this recipe mimic that, too? Yes, sort of. By not overexposing this recipe, you get results that don’t look overexposed (imagine that), but does it closely resemble the film? It’s not as exact as I’d like it to be, but not far off, either. It’s more convincing as an overexposed recipe, but it also does well when not mimicking that. The two pictures below are examples of this, with exposure compensation set at +1/3.

Yard Toys – Farmington, UT – Fujifilm X100V – “Fujicolor Pro 400H”
Ivy Leaves – Farmington, UT – Fujifilm X100V – “Fujicolor Pro 400H”

As you can see, there’s a certain beauty in not overexposing when using this recipe.

The two sets of pictures below are examples of +1/3 exposure compensation, +1 1/3 exposure compensation, and +2 1/3 exposure compensation. In my opinion, the best results are found in the middle category, with exposure compensation in the +1 to +1 2/3 range, but sometimes reducing or increasing the exposure produces interesting results. In other words, oftentimes the best results are with exposure compensation set to +1 to +1 2/3, but try anywhere from +1/3 to +2 2/3, because, depending on the light and subject, you can get good results across a large range of exposures.

+1/3 Exposure Compensation
+1 1/3 Exposure Compensation
+2 1/3 Exposure Compensation
+1/3 Exposure Compensation
+1 1/3 Exposure Compensation
+2 1/3 Exposure Compensation

This film simulation recipe (as of this writing) is only compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10 and X-E4 cameras. I used a Fujifilm X100V to capture all of the images in this article. For some of the pictures I used a Tiffen 1/4 Black Pro Mist filter to diffuse the highlights, particularly the ones with a bright light source; because you are bumping up the exposure so much, this recipe pairs especially well with a diffusion filter, producing a more film-like result.

Classic Negative
Dynamic Range: DR400
Highlight: -2
Shadow: +4
Color: +4
Noise Reduction: -4
Sharpening: -2
Clarity: -4
Grain Effect: Strong, Small
Color Chrome Effect: Strong
Color Chrome Effect Blue: Weak
White Balance: 4900K, 0 Red & -4 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: +1 to +1 2/3 (typically), but try between +1/3 to +2 2/3

Example photographs, all camera-made JPEGs using this new Fujicolor Pro 400H film simulation recipe:

Forest of Light – Farmington, UT – Fujifilm X100V
Bright Leaf – Farmington, UT – Fujifilm X100V

Pink Flowers & Green Leaves – Farmington, UT – Fujifilm X100V
Spring Sunshine – Farmington, UT – Fujifilm X100V
Country Trees – Farmington, UT – Fujifilm X100V
Bright Tree – Salt Lake City, UT – Fujifilm X100V
Evening Creek – Farmington, UT – Fujifilm X100V
Tree Fence – Farmington, UT – Fujifilm X100V
Wild Weeds – Farmington, UT – Fujifilm X100V
Field of Wishes – Farmington, UT – Fujifilm X100V
Make A Wish – Farmington, UT – Fujifilm X100V
White Tree Blooms – Farmington, UT – Fujifilm X100V
Forest Fence – Farmington, UT – Fujifilm X100V
Gnarled Tree – Farmington, UT – Fujifilm X100V
Creek Trail – Farmington, UT – Fujifilm X100V
Jon in the Forest – Farmington, UT – Fujifilm X100V
Trail Bridge – Farmington, UT – Fujifilm X100V
Flatcar Bridge – Farmington, UT – Fujifilm X100V
Dandelion Bench – Farmington, UT – Fujifilm X100V
Lighter Tree – Farmington, UT – Fujifilm X100V
Fresh Aspen Leaves – Farmington, UT – Fujifilm X100V
Farmington Creek – Farmington, UT – Fujifilm X100V
Onion Flower – Farmington, UT – Fujifilm X100V
Bright Rose – Farmington, UT – Fujifilm X100V
Rose Bush & Wall – Farmington, UT – Fujifilm X100V
Rosebush & Vine Ladder – Farmington, UT – Fujifilm X100V
Ready to Float – Farmington, UT – Fujifilm X100V
Hide – Farmington, UT – Fujifilm X100V
Sibling Yard Play – Farmington, UT – Fujifilm X100V
Kids & Outdoor Table – Salt Lake City, UT – Fujifilm X100V
Waiting For Food – Salt Lake City, UT – Fujifilm X100V
Heavenly Hot Cakes – Salt Lake City, UT – Fujifilm X100V
Smiling Joy – Farmington, UT – Fujifilm X100V
Art & Craft Tray – Farmington, UT – Fujifilm X100V

Johanna & Jonathan – Farmington, UT – Fujifilm X100V
Fisher Price Phone – Farmington, UT – Fujifilm X100V
Indoor Basketball Hoop – Farmington, UT – Fujifilm X100V
Slapfish – Farmington, UT – Fujifilm X100V
Three Fake Plants on a Shelf – Farmington, UT – Fujifilm X100V

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black    Amazon   B&H
Fujifilm X100V Silver   Amazon   B&H

Find this film simulation recipe on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

Fujifilm X-Trans III + X-T30 & X-T3 Film Simulation Recipe: Chrome Bypass

Don’t Walk Under Falling Bicycles – Farmington, UT – Fujifilm X-T30 – “Chrome Bypass”

There are a number of X-Trans IV film simulation recipes that I’ve had multiple requests to create versions for that are compatible with X-Trans III and X-T3 and X-T30 cameras. LomoChrome Metropolis and Bleach Bypass are two that are commonly requested. These recipes require JPEG settings that don’t exist on the “older” cameras, including the Classic Negative or Eterna Bleach Bypass film simulations. I knew it would be impossible to recreate those recipes for X-Trans III and the X-T3 and X-T30 cameras, but I wanted to get as close as I could. After much experimenting, I came up with some settings that are sometimes similar to the LomoChrome Metropolis recipe and are sometimes similar to the Bleach Bypass recipe, and sometimes not like either.

What the LomoChrome Metropolis and the Bleach Bypass recipes have in common are that they’re both high in contrast and low in color saturation. There are some other similarities between them, but there’s plenty that’s different, too. This recipe with certain subjects and in certain light situations can resemble one or the other, or neither. It’s as close as I could get. If you like the LomoChrome Metropolis and Bleach Bypass recipes, this is your best bet for X-Trans III and X-T3 and X-T30 cameras (aside from doing double-exposures). While it’s not as “perfect” as I was hoping to achieve, I think it’s a pretty good recipe for capturing dramatic pictures. It’s kind of (but not really) the low saturation version of Dramatic Classic Chrome.

1100 Stop – Farmington, UT – Fujifilm X-T30 – “Chrome Bypass”

Because these settings resemble both the LomoChrome Metropolis and the Bleach Bypass film simulation recipes, I decided to name this recipe Chrome Bypass, taking a little from each name. I don’t currently have access to an X-Trans III camera, so I don’t have any samples captured with a Fujifilm X-Trans III camera, but it should look very similar.

PRO Neg. Std
Dynamic Range: DR200
Highlight: +3
Shadow: +4
Color: -4
Color Chrome Effect: Off or N/A
Sharpness: -1
Noise Reduction: -4
Grain Effect: Strong
White Balance: Auto, +2 Red & -5 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: 0 to +2/3 (typically)

Sample photographs, all camera-made JPEGs, captured with a Fujifilm X-T30 using this “Chrome Bypass” film simulation recipe:

Mountain Teasels – Farmington, UT – Fujifilm X-T30
Cloudy Branches – Farmington, UT – Fujifilm X-T30
Summer Tree – Farmington, UT – Fujifilm X-T30
Country Fence & Old Tires – Farmington, UT – Fujifilm X-T30
Tulip Pot – Farmington, UT – Fujifilm X-T30
Colorful Tulips – Farmington, UT – Fujifilm X-T30
Handy Dandy Grill – Farmington, UT – Fujifilm X-T30
Little Bit of Green – Farmington, UT – Fujifilm X-T30
Thrown Pillow – Farmington, UT – Fujifilm X-T30
Instax Table – Farmington, UT – Fujifilm X-T30

Find this film simulation recipe on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

What I’ve Been Working On (New Film Simulation Recipes Coming Soon!)

The Fuji X Weekly blog keeps me busy!

I haven’t posted anything in several days, but that doesn’t mean I’m not working hard. I have in the works right now five new film simulation recipes that will be ready to publish soon (plus another five that I’m working on, but aren’t ready to publish, plus about 20 on a to-do list). I’ve included a sample picture of each new recipe down below, just as a teaser. I also have two product reviews (one camera and one lens) that are in the early stages of writing; reviews always take a lot of time to complete. Besides that, I’ve been working on some other changes to the blog, which you’ll begin seeing soon (and maybe you’ve already noticed a few). Some of these changes will be bigger than others, and hopefully they will make the Fuji X Weekly experience better in some way.

Even though it might seem quiet, there’s so much going on behind the scenes right now. It’s what keeps the blog moving forward. Good things are coming! I appreciate all of you and I’m honored to have you as a part of this thing. Your support is invaluable to me. The Fujifilm community really is the best!

Now, the teaser pictures! Below are a quick sampling of five new film simulation recipes that will be coming soon.

B&W Superia”

Which one of these five are you most looking forward to? Let me know in the comments!

X-Pro3 To Have New Film Simulation: Classic Negative

Fujifilm Classic Negative

The upcoming Fujifilm X-Pro3, which will feature an unusual rear screen, will have a new film simulation called Classic Negative, which is supposed to resemble Superia film, according to Fujifilm. I get a lot of requests for Superia, so I’m very happy to see this as a new film simulation. Yea!

Fujirumors stated that the X-Pro3 will have some additional adjustments for in-camera RAW processing, such as Clarity. I welcome this because the more tools that Fujifilm provides, the more easily I can achieve a desired look in-camera. Fujifilm is one of only a few companies that take camera-made JPEGs seriously, and is one of the big reasons why I appreciate their products. Shooting JPEGs saves me so much time, allowing my photography to be more productive while simultaneously allowing me to spend more time elsewhere, such as with my family.

I hope that Fujifilm makes these things–the Classic Negative film simulation and the additional tools–available to other cameras, such as the X-T3 and X-T30, which share the same sensor and processor as the upcoming X-Pro3. There is, according to Fujirumors, some big firmware updates on the horizon, and I hope that these are a part of that. Sometimes, when a new feature is included in a new camera, Fujifilm will update older cameras to include it as well, and sometimes they don’t. So it’s really hard to know. I will keep my fingers crossed.

Fujifilm Classic NegativeFujifilm X-Pro3Fujifilm X-Pro3Fujifilm X-Pro3