Fujifilm X-Pro1 (X-Trans I) Film Simulation Recipe: Punchy Velvia

Blooms Despite Adversity – Farmington, UT – Fujifilm X-Pro1 – “Punchy Velvia”

Thomas Schwab sent me an X-Trans I recipe to try, which he calls Punchy Velvia. Whenever Thomas sends me a recipe to try, I’m always excited to program it into the camera, because they’re often great. He’s a friend, and has a good eye for Fujifilm settings. He created the X-Trans I Kodachrome I and Kodachrome II recipes. Thank you, Thomas, for sending this!

I recently went on a hike with this new recipe programmed into my Fujifilm X-Pro1. My kids were with me, and my daughter, Joy, ended up shooting with the camera much more than I did. A couple of these pictures were captured by me, but most were captured by her. This recipe was a great option for photographing the vibrant colors we encountered. For colorful scenes where you want punchy pictures, this recipe or Vivid Color are the ones to use.

Yellow Oak – Farmington, UT – Fujifilm X-Pro1 – “Punchy Velvia”

If you have an X-E1, X-Pro1, or X-M1, be sure to give this recipe a try. You can also use this recipe on X-Trans II and Bayer cameras, but the results will be slightly different; however, feel free to it anyway, because you might like the results.

Velvia
Dynamic Range: DR400
Highlight: +2 (Hard)
Shadow: +2 (Hard)
Color: +2 (High)
Sharpness: +2 (Hard)
Noise Reduction: -2 (Low)
White Balance: Daylight/Fine, 0 Red & 0 Blue
ISO: Auto, up to ISO 3200
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs captured by Joy using this “Punchy Velvia” film simulation recipe on my Fujifilm X-Pro1:

Rock Outcrop – Farmington, UT – Fujifilm X-Pro1 – Photo by Joy Roesch
Boulder in the Forest – Farmington, UT – Fujifilm X-Pro1 – Photo by Joy Roesch
Mountain Forest – Farmington, UT – Fujifilm X-Pro1 – Photo by Joy Roesch
Branches and Blue – Farmington, UT – Fujifilm X-Pro1 – Photo by Joy Roesch
One Leaf Turned – Farmington, UT – Fujifilm X-Pro1 – Photo by Joy Roesch
Oak Leaves – Farmington, UT – Fujifilm X-Pro1 – Photo by Joy Roesch
Backlit Autumn Tree – Farmington, UT – Fujifilm X-Pro1 – Photo by Joy Roesch
Autumn Trees – Farmington, UT – Fujifilm X-Pro1 – Photo by Joy Roesch

Find this film simulation recipes and many more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

Fujifilm X-Trans I (X-E1 + X-Pro1) Patron Early-Access Film Simulation Recipe: Ektachrome

Diesel – Park City, UT – Fujifilm X-Pro1 – “Ektachrome”

The Fuji X Weekly app is free, yet becoming a Fuji X Weekly Patron unlocks the best app experience! One benefit of being a Patron is you get early access to some new film simulation recipes. These early-access recipes will eventually become available free to everyone in time, including this new one. In fact, many early-access recipes have already been publicly published on this blog and the app, so now everyone can use them. Patrons help support Fuji X Weekly and, really, without them there would be no app. So I want to give a special “thank you” to all of the Patrons!

This new Patron early-access recipe is called “Ektachrome” and is compatible with the Fujifilm X-E1 and X-Pro1 cameras. Unfortunately, even though the X-M1 is X-Trans I, this recipe is not compatible with that camera. I really like how this one looks, and I think some of you will really appreciate it, too!

Ektachrome is a line of color transparency film introduced by Kodak in the 1940’s. I did some research, and counted 40 different emulsions over the years that carried the Ektachrome name! Generally speaking, Ektachrome was less warm than Kodachrome (although it depends on which Ektachrome you’re referring to), and also less archival. While Kodachrome was discontinued in 2009, Ektachrome can still be purchased today.

Two Cans – Weber Canyon, UT – Fujifilm X-Pro1

I’m not certain which (of the 40) Ektachrome films this recipe most closely resembles. It has more of a general Ektachrome feel rather than being an exact copy of a specific emulsion. If you like the Kodachrome II recipe that I just published, you’ll like this one, too!

If you are a Fuji X Weekly Patron, it’s available to you right now on the app!

Example photographs, all camera-made JPEGs captured using this “Ektachrome” film simulation recipe on my Fujifilm X-Pro1:

House Flag – Farmington, UT – Fujifilm X-Pro1
Dead Wood – Farmington Bay, UT – Fujifilm X-Pro1
Cattails – Farmington Bay, UT – Fujifilm X-Pro1
Succulent Shelf – Farmington, UT – Fujifilm X-Pro1 – “Ektachrome”
Boy On Couch Watching TV – Farmington, UT – Fujifilm X-Pro1
Drinking Fountain – Weber Canyon, UT – Fujifilm X-Pro1
Two Trees – Farmington, UT – Fujifilm X-Pro1
Berries in a Tree – Farmington, UT – Fujifilm X-Pro1
Blackberry Bush – Farmington, UT – Fujifilm X-Pro1
Francis Peak Summer – Farmington, UT – Fujifilm X-Pro1

Find these film simulation recipes and many more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

Fujifilm X-Trans I Film Simulation Recipe: Color Negative Film

Pink Roses – Farmington, UT – Fujifilm X-Pro1 – “Color Negative Film”

This Fujifilm X-Trans I film simulation recipe was the first that I created after getting my nine-year-old X-Pro1 camera in the mail. It wasn’t intended to mimic the look of any particular film. I was trying to create a good-looking recipe with a white balance shift inspired by my Fujicolor 100 Industrial recipe. It has a wonderful print film aesthetic, perhaps Kodak-like, that looks especially nice in sunny conditions. I call this recipe “Color Negative Film” because of that generic color negative film quality.

If you are a Patron on the Fuji X Weekly App, you’ve had early access to this recipe since May. A different recipe has replaced it, so if you are a Patron, look for that new early-access recipe in the app! For those who are not Patrons, this recipe is now available to you. If you have a Fujifilm X-Pro1, X-E1, or X-M1, this recipe is compatible with your camera.

Diesel Cash Price – Park City, UT – Fujifilm X-Pro1 – “Color Negative Film”

If you have a Fujifilm Bayer camera, I invite you to try this recipe on your camera, although results will be a little different. Technically, X-Trans II cameras can use it, too, although it definitely won’t look the same—maybe you’ll like it, maybe you won’t. If you have an X-Trans I camera, this is a must-try recipe that many of you are sure to love!

Provia
Dynamic Range: DR400
Highlight: +2 (High)
Shadow: +2 (High)
Color: -2 (Low)
Sharpness: -1 (Medium-Low)
Noise Reduction: -2 (Low)
White Balance: 3000K, +8 Red & -9 Blue
ISO: Auto, up to ISO 3200
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs captured using this “Color Negative Film” recipe:

Rising Up – Farmington, UT – Fujifilm X-Pro1
Red Leaves of Summer – Layton, UT – Fujifilm X-Pro1
Backlit White Blossom – Farmington, UT – Fujifilm X-Pro1
Yellow Bench – Layton, UT – Fujifilm X-Pro1
Tiny Fruit – Farmington, UT – Fujifilm X-Pro1
Blackberry Forest – Farmington, UT – Fujifilm X-Pro1
Building Mountain Storm – Farmington, UT – Fujifilm X-Pro1
Dead Stump – Farmington Bay, UT – Fujifilm X-Pro1
Log Bridge – Salt Lake City, UT – Fujifilm X-Pro1
Cone Closed – Weber Canyon, UT – Fujifilm X-Pro1

Find these film simulation recipes and many more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

Fuji Features: Fujifilm X-Pro1 in 2021?

The Fujifilm X-Pro1 is nine-years-old. It was the very first interchangeable-lens X camera and also the first to have an X-Trans sensor. If it failed, this website and film simulation recipes probably wouldn’t exist. Thankfully, despite its shortcomings, people could see the potential, and the X-Pro1 was an instant hit.

My Fujifilm journey began with an X-E1, the X-Pro1’s little brother. I briefly shot with an X-Pro2, a camera that I loved. I never had an X-Pro1, but it’s a well-regarded camera, even today. The last Fuji Features article was entitled Fujifilm X-Pro3 in 2021, so I decided this week to find articles and videos about using the X-Pro1 in 2021.

Hopefully, you’ll find this post interesting, and it will help you get through another Hump Day. Maybe it will inspire you to add an old X-Pro1 to your camera collection. I did. More on that later.

The Phoblographer

The Inspired Eye

Daniel Ian