Kodachrome Blue — Fujifilm X-E4 (X-Trans IV) Film Simulation Recipe

Kodak made Kodachrome color-reversal (slide) film from 1935 through 2009. There are three era’s of Kodachrome: 1935-1960, 1961-1973, and 1974-2009. Each era has its own look; the second and third eras are probably the most similar. Kodachrome is actually a B&W film, with color dyes added during development. It was a unique and complicated process. Because of how the film works, it’s the most difficult emulsion to scan, often producing a blue cast that doesn’t exist when viewing the slides through a projector or on a light table.
Professional labs will have a profile to color correct Kodachrome scans, but even that’s not usually a 100% match. As it used to be said, “There’s nothing like projected Kodachrome!” If the scans aren’t carefully corrected, the results are often significantly more blue than the slides. The feeling that all the world’s a sunny day (as Paul Simon sang) is completely gone. Once you know what to look for, it’s easy to spot these incorrectly color corrected Kodachrome images, and they’re prevalent.

Over the last few weeks I’ve stumbled across several sets of these incorrectly color corrected Kodachromes while perusing the web, mostly from the second era of the film. I thought that the look was interesting, so I set out to recreate it on my Fujifilm X-E4; however, the process was more challenging than I had anticipated. I had assumed that Classic Chrome would be the best film simulation to base this new Film Simulation Recipe on—it was the obvious choice, right?—but I couldn’t get it to look right. It was actually the fifth film sim I tried before I decided that I was finally on the right track.
After four different modifications, I felt I got it as close as I could, and had a reasonable facsimile of the film when not appropriately color corrected. Interestingly, I compared my Recipe to some incorrectly colored Kodachrome 64 film scans in my collection—some frames I captured on a Canon AE-1 back in 1999 that (when I later had them scanned) the lab rendered too blue—and the resemblance was striking. I made one more small change to the Recipe to get it even closer, and called it good. One thing that I wish was possible is a little more color saturation, but +4 is the highest option; if +5 or maybe +6 were available, I’d have bumped Color just a tad higher.



This Kodachrome Blue Film Simulation Recipe is compatible with the Fujifilm X-T4, X-S10, X-E4, and X-T30 II cameras, as well as the GFX100S. For fifth-generation X-Trans models, as well as the GFX100 II, GFX100S II, and GFX100RF, set Color Chrome FX Blue to Weak instead of Strong. This isn’t a Recipe that I suspect will be anyone’s go-to for everyday use—I’d look at Kodachrome 64 or Kodachrome II for general photography—but it’s a fun one that I think some of you will really appreciate in certain circumstances. I personally like the retro feelings that Kodachrome Blue produces. Note: this was an App Patron Early-Access Recipe, but now it is available to everyone.
Film Simulation: Eterna Bleach Bypass
Dynamic Range: DR200
Grain Effect: Weak, Small
Color Chrome Effect: Strong
Color Chrome FX Blue: Strong
White Balance: 6500K, -6 Red & +9 Blue
Highlight: +2.5
Shadow: -0.5
Color: +4
Sharpness: +1
High ISO NR: -4
Clarity: +3
ISO: Auto, up to ISO 6400
Exposure Compensation: -2/3 to 0 (typically)
Example photographs, all camera-made JPEGs captured using this Kodachrome Blue Film Simulation Recipe on my Fujifilm X-E4:




























Find this Film Simulation Recipe and 400 more in the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.





















































































































































































































































