Fujifilm X-T1 film simulation

New Fujifilm X-Trans II FXW App Patron Early-Access Film Simulation Recipe: Provia Negative

*Empty Baseball Field* – Buckeye, AZ – Fujifilm X-T1 – “Provia Negative”

The Fuji X Weekly App is free, yet becoming a Fuji X Weekly Patron unlocks the best App experience! One benefit of being a Patron is you get early access to some new Film Simulation Recipes. These Early-Access Recipes will eventually become available free to everyone in time, including this new one. In fact, many Early-Access Recipes have already been publicly published on this Blog and the App, so now everyone can use them. Patrons help support Fuji X Weekly and, really, without them there would be no App. So I want to give a special “thank you” to all of the Patrons!

I didn’t model this recipe after any film or process. My first thought was this: how can I make a recipe that’s helpful. Let me back this up a minute. Unless your camera is an X-Pro3 or newer, you cannot save a white balance shift with your C1-C7 custom presets; however, your camera will remember one shift per white balance type, so if each C1-C7 recipe uses a different white balance type, you won’t have to remember to change the shift when you change recipes. For X-Trans II, there are recipes that use Auto, Daylight (which Fujifilm calls “Fine” for some reason), Kelvin, and Shade, so I thought it would be helpful to create a recipe that calls for a different white balance type that I haven’t yet used.

*Indoor Tree* – Buckeye, AZ – Fujifilm X-T1 – “Provia Negative”

After some playing around, I created a Film Simulation Recipe that I was quite happy with. It reminds me a little of Fujichrome Provia 100F slide film, but less vibrant, and a tad less contrasty, too, but still kind of similar; however, I think the tonality is more similar to negative film than reversal film. That’s why I call this recipe Provia Negative. This recipe has a slight cool color cast, with white leaning towards blue. I was able to get good results in several different light situations.

If you are a Fuji X Weekly App Patron, it’s available to you right now on the App! Don’t have the App? Download it for free today! Become a Patron to unlock the best App experience and gain early access to this recipe.

Example photographs, all camera-made JPEGs captured using this “Provia Negative” Film Simulation on my Fujifilm X-T1:

*Two Magenta Flowers* – Buckeye, AZ – Fujifilm X-T1

*One Bloom Remains* – Buckeye, AZ – Fujifilm X-T1

*Pink & Green* – Buckeye, AZ – Fujifilm X-T1

*Pop of Warmth* – Buckeye, AZ – Fujifilm X-T1

*Pink Flower Blossom* – Buckeye, AZ – Fujifilm X-T1

*Pink Flower Blossom 2* – Buckeye, AZ – Fujifilm X-T1

*Bougainvillea Pink* – Buckeye, AZ – Fujifilm X-T1

*Backlit Flowers & Leaves* – Buckeye, AZ – Fujifilm X-T1

*Basketball in the Grass* – Buckeye, AZ – Fujifilm X-T1

*Go Supply* – Goodyear, AZ – Fujifilm X-T1

*Hobby Lobby* – Avondale, AZ – Fujifilm X-T1

*Square on Block Wall* – Buckeye, AZ – Fujifilm X-T1

Fujifilm X-T1 (X-Trans II) Film Simulation Recipe: Color Negative Film

Posted on July 19 by Ritchie Roesch

*Yellow* – Layton, UT – Fujifilm X-T1 – “Color Negative Film”

One of my favorite X-Trans I Film Simulation Recipes is Color Negative Film, which has a white balance shift inspired by my Fujicolor 100 Industrial recipe. This recipe, which was a Patron Early-Access Recipe on the Fuji X Weekly App but is now available to everyone, is an adaptation of the X-Trans I recipe for X-Trans II. It doesn’t mimic any specific film, but just has a more generic film aesthetic. It’s not an exact match to the X-Trans I recipe, but it’s pretty close.

This “Color Negative Film” recipe is a great allrounder for daylight situations. My Fujifilm X-T1 was boxed away for over two months as I moved, and when I unboxed it last week this recipe is the one that I programmed and used first. It’s a recipe that I know many of you will love, too. If you have an X-Trans II camera, give this one a try!

*No Swimming* – Layton, UT – Fujifilm X-T1 – “Color Negative Film”

Provia
Dynamic Range: DR400
Highlight: +2 (Hard)
Shadow: +2 (Hard)
Color: -2 (Low)
Sharpness: -1 (Medium-Soft)
Noise Reduction: -2 (Low)
White Balance: 3200K, +8 Red & -8 Blue
ISO: Auto up to ISO 3200
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs captured using this “Color Negative Film” film simulation recipe on my Fujifilm X-T1:

*Sunlit Leaves* – Layton, UT – Fujifilm X-T1

*Green Leaves* – Farmington, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Early Autumn* – Farmington, UT – Fujifilm X-T1

*Forest Trail* – Farmington, UT – Fujifilm X-T1

*One Dead Leaf* – Farmington, UT – Fujifilm X-T1

*Backlit Autumn Leaves* – Farmington, UT – Fujifilm X-T1

*Autumn Flare* – Farmington, UT – Fujifilm X-T1

*Changing Leaves in the Woods* – Farmington, UT – Fujifilm X-T1

*Yellow Shrub* – Farmington, UT – Fujifilm X-T1

*Trail to the Trees* – Layton, UT – Fujifilm X-T1

*Water Logged* – Farmington, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Little Purple Blooms* – Farmington, UT – Fujifilm X-T1

*Reeds of Summer* – Farmington, UT – Fujifilm X-T1

*Magenta Blossoms* – Buckeye, AZ – Fujifilm X-T1

*Trumpet Flower* – Buckeye, AZ – Fujifilm X-T1

*Pride of Barbados* – Buckeye, AZ – Fujifilm X-T1

*Jon by a Wall* – Buckeye, AZ – Fujifilm X-T1

Find this Film Simulation Recipe and over 200 more on the Fuji X Weekly App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

Fujifilm X-T1 (X-Trans II) Film Simulation Recipe: Winter Slide

Posted on December 13, 2021 by Ritchie Roesch

*Winter Neighborhood at Sunset* – Farmington, UT – Fujifilm X-T1 – “Winter Slide”

This recipe began with a weather forecast. It had been unusually dry and warm here in Utah, but cold temperatures and plenty of snow was on the way. At this time of year I get asked regularly which film simulation recipes are best for snow—there are plenty that will work well, but not many that are specifically made for it. A camera like the Fujifilm X-T1, which is weather-sealed, is great for these type of conditions, so I thought, with the forecasted wintry weather, I’d create a good-for-snow recipe for X-Trans II cameras that I could use on my X-T1. When the snow finally came, I’d be ready!

The initial inspiration for this recipe was Agfa Precisa CT 100 color slide film, which I read was one of the best film options for winter situations. I wasn’t having good luck recreating the aesthetic of it, but, in the process, I made some settings that I thought might be good for snow. So I failed at mimicking Agfa Precisa CT 100, but I succeeded at what I set out to do, which was a film simulation recipe that works well in snow. Interestingly, when I created the recipe, it wasn’t yet snowy, so I wasn’t completely sure how it would do. Luckily, it did every bit as well as I had hoped it would.

*Two Cold Horses* – Farmington, UT – Fujifilm X-T1 – “Winter Slide”

The trick to snow photography is to overexpose (based on what the meter says) because the camera sees a lot of white and wants to make it grey. So if you follow the meter, you’ll get a lot of dark pictures. By increasing the exposure compensation, you’ll get brighter pictures—I found myself often using +1 exposure compensation. If you are using this recipe when it’s not wintry white, you won’t have to increase the exposure compensation quite as much, and +1/3 to +2/3 will likely be better. This film simulation recipe is compatible with all X-Trans II cameras.

Provia/STD
Dynamic Range: DR200
Highlight: 0 (Standard)
Shadow: +2 (Hard)
Color: -2 (Low)
Sharpness: -1 (Medium-Soft)
Noise Reduction: -2 (Low)
White Balance: 5000K, -1 Red & -3 Blue
ISO: Auto up to ISO 3200
Exposure Compensation: +1/3 to +1 1/3 (typically)

Example photographs, all camera-made JPEGs captured on my Fujifilm X-T1 using this “Winter Slide” film simulation recipe:

*Ice Cold Red* – Farmington, UT – Fujifilm X-T1

*Winter Red Berries* – Farmington, UT – Fujifilm X-T1

*Snow on Branch* – Farmington, UT – Fujifilm X-T1

*Snow on Tree Trunk* – Farmington, UT – Fujifilm X-T1

*Winter Tree* – Farmington, UT – Fujifilm X-T1

*Winter Bush with Red Berries* – Farmington, UT – Fujifilm X-T1

*Snow on a Bush* – Farmington, UT – Fujifilm X-T1

*Winter Girl* – Farmington, UT – Fujifilm X-T1

*White House in Snow* – Farmington, UT – Fujifilm X-T1

*Lamp with Bow* – Farmington, UT – Fujifilm X-T1

*Winter Blue Home* – Farmington, UT – Fujifilm X-T1

*One Light in a Tree* – Farmington, UT – Fujifilm X-T1

Find this film simulation recipe and many more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

$2.00

Fujifilm X-T1 (X-Trans II) Film Simulation Recipe: Kodacolor 200

Posted on November 2, 2021 by Ritchie Roesch

*Pumpkin* – Farmington, UT – Fujifilm X-T1 – “Kodacolor 200”

For this recipe, I was attempting to recreate a Kodak Portra 400 NC aesthetic. A couple of decades ago, Portra (both the ISO 160 and ISO 400 emulsions) came in two versions: NC (“Neutral Color”) and VC (“Vivid Color”). Kodak later revised the film to be something in-between the two, which they simply called Portra 160 and Portra 400. This recipe is, I believe, in the general ballpark of Portra 400 NC, but not exactly right; however, I like the results anyway. So if this recipe is close to Kodak Portra 400 NC, why did I call it Kodacolor 200? Because I think it is actually a little closer to Kodacolor 200, which is a variety of Kodacolor VR, and related to ColorPlus 200. I wouldn’t call it an exact match to Kodacolor 200, but that’s the film this is most likely closest to. If you want a Portra 400 NC or Kodacolor 200 aesthetic, this recipe is relatively similar to both.

There’s a fair amount of contrast produced by this recipe, which looks really good in conditions without harsh light. In bright daylight, the contrast might be a little too much, perhaps more closely resembling push-processed film, or (to a lessor extent) even bleach-bypassed Portra. On bright days, you might consider dropping both Shadow and Highlight to +1 if you find it to be too contrasty. I believe this film simulation recipe produces its best results when the sun is a little obscured, but not heavy overcast; however, it’s possible to get good results in many different circumstances. If your X-Trans II camera has Classic Chrome, I invite you to give this recipe a try—it’s a great high-contrast, low saturation option.

*Power Pole Cup* – Farmington, UT – Fujifilm X-T1 – “Kodacolor 200”

Classic Chrome
Dynamic Range: DR200
Highlight: +2 (Hard)
Shadow: +2 (Hard)
Color: -2 (Low)
Sharpness: -1 (Medium-Soft)
Noise Reduction: -2 (Low)
White Balance: 3200K, +8 Red & -8 Blue
ISO: Auto up to ISO 3200
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs captured on my Fujifilm X-T1 using this Kodacolor 200 film simulation recipe:

*Phragmites* – Farmington, UT – Fujifilm X-T1

*Touch of Red* – Salt Lake City, UT – Fujifilm X-T1

*Pumpkin Stem* – Farmington, UT – Fujifilm X-T1

*Autumn Shrub* – Farmington, UT – Fujifilm X-T1

*Ground Leaves* – Farmington, UT – Fujifilm X-T1

*Neighborhood Autumn Tree* – Farmington, UT – Fujifilm X-T1

*Creek Path in Autumn* – Farmington, UT – Fujifilm X-T1

*Narrow Path* – Farmington, UT – Fujifilm X-T1

*Old Mile Post* – Farmington, UT – Fujifilm X-T1

*Delicate Fibers* – Farmington, UT – Fujifilm X-T1

Find this film simulation recipe and many more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

$2.00

Fujifilm X-Trans II Film Simulation Recipe: Yosemite Velvia

Posted on June 7, 2021 by Ritchie Roesch

Photo by Joy Roesch – Yosemite NP, CA – Fujifilm X-T1 -“Yosemite Velvia”

On a recent trip to Yosemite National Park, my daughter, Joy, created a new film simulation recipe for X-Trans II cameras, which I’m calling Yosemite Velvia. Joy has made two X-Trans I recipes, Superia Xtra 400 and Winter Blue, but this is her first for X-Trans II. On this trip I let her use my Fujifilm X-T1 camera, and I told her that she could use whichever settings she wanted—this recipe is what she came up with.

I asked her why she chose these settings. She told me that she wanted the pictures to be colorful but without too much contrast. She decided on the Shade white balance because the forecast was for overcast sky, although it ended up being mostly sunny; however, she liked how it looked, so she stuck with it. Besides photographing in Yosemite, she also used these settings in Reno, Nevada.

This film simulation recipe is compatible with all Fujifilm X-Trans II cameras. You can use it on X-Trans I and Bayer sensor cameras, too, but the results will be a little different (feel free to try, though).

Velvia
Dynamic Range: DR200
Highlight: -1
Shadow: -2
Color: +2
Sharpness: -1
Noise Reduction: -2
White Balance: Shade, -2 Red & -2 Blue
ISO: Auto up to ISO 3200
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs captured by Joy on my Fujifilm X-T1 using this “Yosemite Velvia” film simulation recipe:

Photo by Joy Roesch – Yosemite NP, CA – Fujifilm X-T1

Photo by Joy Roesch – Reno, NV – Fujifilm X-T1

Find this film simulation recipe on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

$2.00

Fujifilm X-Trans II Film Simulation Recipe: Portra v2

Posted on April 18, 2021 by Ritchie Roesch

*Joshua & Joy at a Creek* – Layton, UT – Fujifilm X-T1 – “Portra v2” – Photo by Jon Roesch

I’ve been wanting to create a Kodak Portra 400 film simulation recipe for Fujifilm X-Trans II cameras for a long time now. I’ve had a Portra 160 recipe on this website for awhile, but I’ve never created a Portra 400 recipe for this sensor. I’ve actually created five different Portra 400 recipes for X-Trans III and IV cameras, but those don’t work on X-Trans II. I made a guess on my Fujifilm X-T1 on what might be a good Portra 400 recipe, handed the camera to my son, Jon, and let him capture some pictures with it. You might remember that Jon created his own Classic Chrome recipe; this time I made the recipe, but I let him capture the pictures.

You might be wondering why I didn’t call this recipe “Portra 400” but named it “Portra v2” instead. While I believe that this recipe is similar to Portra 400, I do plan to create a more accurate recipe. Actually, that was my intentions with these pictures: reprocess the RAW files in-camera to refine the Portra look; however, as I reviewed the pictures, I liked the aesthetic created by these settings, so I decided to keep this as its own recipe. I will still work on a different Portra 400 recipe for X-Trans II.

*Trees* – Layton, UT – Fujifilm X-T1 – “Portra v2” – Photo by Jon Roesch

One film can have many different aesthetics, depending on how it’s shot, developed, scanned or printed, and this is especially true with Kodak Portra 400. Portra can have many different looks. This recipe does resemble one of those aesthetics, but it definitely doesn’t resemble all of the aesthetics, or even the most common. If you do like Portra, I’m confident that you’ll appreciate these settings, which is compatible with all X-Trans II cameras that have the Classic Chrome film simulation.

Classic Chrome
Dynamic Range: DR200
Highlight: -1 (Medium-Low)
Shadow: -1 (Medium-Low)
Color: +2 (High)
Sharpness: -1 (Medium-Low)
Noise Reduction: -2 (Low)
White Balance: Daylight/Fine, +4 Red & -4 Blue
ISO: Auto up to ISO 3200
Exposure Compensation: +2/3 to +1 (typically)

Example photographs, all camera-made JPEGs captured by Jon on my Fujifilm X-T1 using this Portra v2 film simulation recipe:

*Water* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Fence Tree* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Trees & Lake* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Creek in the Woods* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Trees & Leaves* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Moss on a Log* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Grass* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

*Bridge* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

*My Friend* – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch

Find this film simulation recipe on the Fuji X Weekly app!

Help Fuji X Weekly

$2.00

Fujifilm X-T1 (X-Trans II) Film Simulation Recipe: “Eterna”

Posted on June 11, 2020 by Ritchie Roesch

Lavender – Farmington, UT – Fujifilm X-T1 – “Eterna”

I haven’t forgotten about my Fujifilm X-T1! My last five film simulation recipes have been for my new X100V, but I will continue making recipes for other sensors. Not everyone, probably not most Fujifilm X shooters, have the latest models, so the recipes for those cameras are irrelevant to many Fuji X Weekly readers. There will still be many articles related to the X100V, but I will continue to publish articles about other Fujifilm cameras, too. I’ll try to keep things balanced.

This “Eterna” film simulation recipe is my best facsimile of my X-T30 Eterna recipe. Obviously X-Trans II cameras don’t have the Eterna film simulation, as well as other options that the X-T30 has. It’s impossible to make an exact match, but this one is surprisingly pretty close. It looks nothing like straight-out-of-the-box Eterna, but it resembles pretty closely my Eterna recipe, which requires some big adjustments to various settings.

Red Blooms – Farmington, UT – Fujifilm X-T1 – “Eterna”

My X-T1 “Eterna” recipe has a strong warm color cast, and it has a fair amount of contrast. It reminds me of Kodak Gold printed on Kodak paper, but I’m sure it’s not an exact match for that, just a general impression. This recipe is not for every situation, but it can look great for certain pictures.

PRO Neg. Std
Dynamic Range: DR100
Highlight: +2 (High)
Shadow: +1 (Medium-High)
Color: +2 (High)
Sharpness: +1 (Medium-High)
Noise Reduction: -2 (Low)
White Balance: Auto, +6 Red & -7 Blue
ISO: Auto, up to ISO 3200
Exposure Compensation: -1/3 to +1/3 (typically)

Example photographs, all camera-made JPEGs using this “Eterna” recipe on my Fujifilm X-T1:

Yellow Truck with Red Graffiti – Salt Lake City, UT – Fujifilm X-T1

Empty Trailers – Salt Lake City, UT – Fujifilm X-T1

Evening Thistle – Salt Lake City, UT – Fujifilm X-T1

Someone’s Watching – Salt Lake City, UT – Fujifilm X-T1

Authorized Persons and Vehicles Only – Salt Lake City, UT – Fujifilm X-T1

Bike Lane Ends – Salt Lake City, UT – Fujifilm X-T1

Stump by the Water – Salt Lake City, UT – Fujifilm X-T1

Pole Reflection – Salt Lake City, UT – Fujifilm X-T1

Sunstar Tree – Salt Lake City, UT – Fujifilm X-T1

Empty Bench – Salt Lake City, UT – Fujifilm X-T1

Ford 250 – Salt Lake City, UT – Fujifilm X-T1

SkyWest – Salt Lake City, UT – Fujifilm X-T1

Statue Girl on Bench – Farmington, UT – Fujifilm X-T1

Shadow Stripes – Salt Lake City, UT – Fujifilm X-T1

Toes & Couch – Farmington, UT – Fujifilm X-T1

Josh in the Window Light – Farmington, UT – Fujifilm X-T1

Kitchen Succulent – Farmington, UT – Fujifilm X-T1

Tree Branch Blossoms – Farmington, UT – Fujifilm X-T1

Cloud Above The Mountain Ridge – Farmington, UT – Fujifilm X-T1

Mountain Tree – Farmington, UT – Fujifilm X-T1

Tree Top – Farmington, UT – Fujifilm X-T1

Fujifilm X-T1 Agfa Optima (Provia) Film Simulation Recipe

Posted on March 22, 2020 by Ritchie Roesch

Reeds & Mountain – Farmington, UT – Fujifilm X-T1 “Agfa Optima”

The film simulation recipe in this article is my Agfa Optima recipe, which is compatible with X-Trans III & IV cameras, converted for use on my Fujifilm X-T1. While the X-T1 is an X-Trans II camera, you can also use this recipe on X-Trans I and Bayer sensor cameras. Agfa Optima is a color negative film that was around from the mid-1990’s to the mid-2000’s.

Provia
Dynamic Range: DR100
Highlight: -1 (Medium-Low)
Shadow: +1 (Medium-High)
Color: -2 (Low)
Sharpness: 0 (Medium)
Noise Reduction: -2 (Low)
White Balance: Daylight, -3 Red & +1 Blue
ISO: Auto, up to ISO 3200

Example photographs, all camera-made JPEGs using this Agfa Optima recipe on my Fujifilm X-T1:

Eggs in a Bowl – Farmington, UT – Fujifilm X-T1

Take a Picture Pronto – Farmington, UT – Fujifilm X-T1

Fruity Cereal – Farmington, UT – Fujifilm X-T1

Stealth Mode – Farmington, UT – Fujifilm X-T1

Suburban Alleyway – Farmington, UT – Fujifilm X-T1

Windows & Shadows – Farmington, UT – Fujifilm X-T1

Pine Tree & Sky – Farmington, UT – Fujifilm X-T1

Green & Fence – Farmington, UT – Fujifilm X-T1

Rural Metal Fence – Farmington, UT – Fujifilm X-T1

Marshland Sky – Farmington, UT – Fujifilm X-T1

Fujifilm X-T1 (X-Trans II) Kodachrome II Film Simulation Recipe

Posted on February 12, 2020 by Ritchie Roesch

Rural Grass – Farmington Bay, UT – Fujifilm X-T1

One of my favorite film simulation recipes, and one of the most popular, if not the most popular, on Fuji X Weekly, is my Kodachrome II recipe. This version of that recipe is adapted for Fujifilm X-Trans II cameras, such as my X-T1. It will work on all cameras with an X-Trans II sensor, plus Bayer sensor cameras, such as the XF10, X-T100 and X-A7. Because it requires the Classic Chrome film simulation, it is not compatible with X-Trans I cameras, or the original X100.

Classic Chrome
Dynamic Range: DR200
Highlight: +2 (High)
Shadow: +1 (Medium-High)
Color: -1 (Medium-Low)
Sharpness: 0 (Medium)
Noise Reduction: -2 (Low)
White Balance: Auto, +1 Red & -2 Blue
ISO: Auto up to ISO 3200

Example photographs, all camera-made JPEGs captured on my Fujifilm X-T1 using this Kodachrome II film simulation recipe:

The Wetlands of Farmington Bay – Farmington Bay, UT – Fujifilm X-T1

Pallet Dump – Farmington, UT – Fujifilm X-T1

Old Wood – Farmington Bay, UT – Fujifilm X-T1

February Thistles – Farmington Bay, UT – Fujifilm X-T1

Francis Peak in February – Farmington, UT – Fujifilm X-T1

Succulents – Farmington, UT – Fujifilm X-T1

Bright Apple – Farmington, UT – Fujifilm X-T1

Kodak Film Canisters – Farmington, UT – Fujifilm X-T1

Bolsey on the Camera Shelf – Farmington, UT – Fujifilm X-T1

Longing For Another World – Farmington, UT – Fujifilm X-T1

Help Fuji X Weekly

$5.00

My Fujifilm X-T1 (X-Trans II) Kodacolor Film Simulation Recipe

Posted on February 3, 2020 by Ritchie Roesch

Man in Red – Farmington, UT – Fujifilm X-T1 – “Kodacolor”

Yesterday I published my Kodachrome 64 recipe for X-Trans II cameras, such as my Fujifilm X-T1, and today I will share with you my Kodacolor recipe for X-Trans II! Because this Kodacolor recipe requires the Classic Chrome film simulation, those with X-Trans I cameras can’t use it, but those with X-Trans II or Bayer sensor cameras can. While I got the overall aesthetic pretty darn close to the original Kodacolor recipe for X-Trans III and IV, the one thing that I wish I could change is the grain. Newer Fujifilm cameras have faux grain options, but older ones don’t. If you want to mimic the grain in-camera, your best option is to use a higher ISO, such as 3200 or 6400, and let the digital noise act as faux grain. Otherwise, I’m quite pleased with how this Kodacolor film simulation recipe turned out.

Classic Chrome
Dynamic Range: DR400
Highlight: +1 (Medium-High)
Shadow: +1 (Medium-High)
Color: -2 (Low)
Sharpness: 0 (Medium)
Noise Reduction: -2 (Low)
White Balance: 6300K, -3 Red & -2 Blue
ISO: Auto, up to ISO 6400

Example photographs, all camera-made JPEGs using this Kodacolor recipe on my Fujifilm X-T1:

Front Runner – Farmington, UT – Fujifilm X-T1

Fro – Farmington, UT – Fujifilm X-T1

Cross at Crosswalks – Farmington, UT – Fujifilm X-T1

Look Both Ways – Farmington, UT – Fujifilm X-T1

Pipe – Farmington, UT – Fujifilm X-T1

Rusty Shadows – Farmington, UT – Fujifilm X-T1

Stop by the Rack – Farmington, UT – Fujifilm X-T1

Nord’s Stop – Farmington, UT – Fujifilm X-T1

Mall Across the Mud – Farmington, UT – Fujifilm X-T1

Pond Among Reeds – Farmington Bay, UT – Fujifilm X-T1

Grass on the Water – Farmington Bay, UT – Fujifilm X-T1

Lake Reflection – Farmington Bay, UT – Fujifilm X-T1

Antelope Island Beyond Farmington Bay – Farmington Bay, UT – Fujifilm X-T1

Camera Shelf – Farmington, UT – Fujifilm X-T1

Green is Good for My Soul – Farmington, UT – Fujifilm X-T1

Help Fuji X Weekly

$5.00

My Fujifilm X-T1 (X-Trans II) Kodachrome 64 Film Simulation Recipe

Posted on February 3, 2020 by Ritchie Roesch

Sun Roof – Farmington, UT – Fujifilm X-T1 – “Kodachrome 64”

One of my favorite film simulation recipes is Kodachrome 64. It’s also one of the most popular recipes on Fuji X Weekly. Those with X-Trans III and IV cameras, such as the Fujifilm X-T30 that I created it on, have been enjoying it since August, but those with X-Trans II cameras—X-T1, X-T10, X-E2, X-E2s, X100T, and X70—have been left out of the fun. Those with Bayer sensor cameras, such as the X-T100, XF10, X-A7, etc., have been out of luck, too. That all changes, starting now. I have cracked the code, and created a Kodachrome 64 recipe for my X-Trans II camera! Unfortunately, it won’t work on the X100, X100S, X-E1 or X-Pro1 because it requires the Classic Chrome film simulation, which those cameras don’t have. But those who own a Fujifilm X-Trans II or Bayer camera, which do have Classic Chrome, I’m sure will appreciate this Kodachrome 64 recipe.

Classic Chrome
Dynamic Range: DR400
Highlight: +2 (High)
Shadow: +1 (Medium-High)
Color: 0 (Medium)
Sharpness: 0 (Medium)
Noise Reduction: -2 (Low)
White Balance: Daylight, 0 Red & -3 Blue
ISO: Auto, up to ISO 3200

Example photographs, all camera-made JPEGs using this Kodachrome 64 recipe on my Fujifilm X-T1:

Watered Tree – Farmington, UT – Fujifilm X-T1

Reflection in the Grass – Farmington, UT – Fujifilm X-T1

Reed Grass – Farmington, UT – Fujifilm X-T1

Reeds In Water – Farmington, UT – Fujifilm X-T1

Sisters on a Bridge – Farmington, UT – Fujifilm X-T1

Red Mustang – Farmington, UT – Fujifilm X-T1

Wrangler – Farmington, UT – Fujifilm X-T1

Parking Lot Sunset – Farmington, UT – Fujifilm X-T1

January Evening Hill – Farmington, UT – Fujifilm X-T1

Rooftop Birds – Farmington, UT – Fujifilm X-T1

Suburban Silver Lining – Farmington, UT – Fujifilm X-T1

Coffee Cup – Farmington, UT – Fujifilm X-T1

Prerequisite – Farmington, UT – Fujifilm X-T1

Yellow Pillows – Farmington, UT – Fujifilm X-T1

Smiling Jon – Farmington, UT – Fujifilm X-T1

Help Fuji X Weekly

$5.00

First Fujifilm X-T1 Film Simulation Recipes

Posted on January 21, 2020 by Ritchie Roesch

Fujifilm X-T1 Blog

I’ve had my Fujifilm X-T1 for less than two weeks. I plan to create many different film simulation recipes for it, but that takes time, so they’ll likely trickle out over the coming months. I did create three film simulation recipes, which you’ll find below. I like to mimic the aesthetic of vintage films with in-camera JPEG settings, as I learned photography in the film era. These three X-T1 recipes aren’t intended to mimic the look of any particular film; I just like how they look.

The in-camera JPEG options on the X-T1, which has an X-Trans II sensor, are different and much more limited than X-Trans IV or even X-Trans III cameras. Fujifilm continues to provide more and better features to achieve desired looks straight out of camera. While the X-T1 doesn’t have as many options, it’s still possible to get very nice pictures right out of the camera, no post-processing needed. Actually, sometimes it’s nice to have fewer choices as it makes things more simple.

Even though these recipes were created on a Fujifilm X-T1, they’re compatible with all X-Trans II cameras, such as the X100T, X-E2, and X-T10, as well as Fujifilm Bayer cameras, like the XF10, X-T100, and X-A7. The Velvia and Monochrome recipes are compatible with X-Trans I cameras, such as the X-Pro1, X100S and X-E1. I should also point out that my Fujifilm XF10 film simulation recipes are compatible with the X-T1 and other X-Trans II cameras.

Some of you have been asking me to create recipes that are compatible with the older models for some time now, and I’m happy to finally be able to share some. You’ve waited awhile! These three film simulations are just the beginning for the X-T1. I will be creating more. I hope to recreate some of my other looks with the X-Trans II sensor, but we’ll see how that goes. Some future recipes might require unconventional approaches. I can’t wait to see what I come up with! In the meantime, enjoy the recipes below.

Classic Chrome

Praying the Order is Right – Salt Lake City, UT – Fujifilm X-T1

Film Simulation: Classic Chrome
Dynamic Range: DR200
White Balance: Auto, -1 Red & -1 Blue
Color: +2 (High)
Highlight: +1 (Medium-High)
Shadow: +1 (Medium-High)
Sharpness: 0 (STD)
Noise Reduction: -2 (Low)
ISO: Auto, up to ISO 3200

Rural Road In Winter – Salt Lake City, UT – Fujifilm X-T1

Winter Boxcar – Farmington, UT – Fujifilm X-T1

Flaming Lemon – South Ogden, UT – Fujifilm X-T1

Joyful Dining – South Ogden, UT – Fujifilm X-T1

Opening a Soda Bottle – South Ogden, UT – Fujifilm X-T1

Egg, Bowl & Rice – South Ogden, UT – Fujifilm X-T1

Grill Fire – South Ogden, UT – Fujifilm X-T1

Velvia

Pink Penguin – Salt Lake City, UT – Fujifilm X-T1

Film Simulation: Velvia
Dynamic Range: DR200
White Balance: Auto, 0 Red & -2 Blue
Color: +2 (High)
Highlight: -1 (Medium-Low)
Shadow: -1 (Medium-Low)
Sharpness : 0 (STD)
Noise Reduction: -2 (Low)
ISO: Auto, up to ISO 3200

Kobe Cold – South Ogden, UT – Fujifilm X-T1

Sushi Lamp – South Ogden, UT – Fujifilm X-T1

For Goodness Sake – South Ogden, UT – Fujifilm X-T1

Anchored Caboose – Farmington, UT – Fujifilm X-T1

Red In The Woods – Farmington, UT – Fujifilm X-T1

When The Season Is All Wrong – Farmington, UT – Fujifilm X-T1

Rudy Drain Winter – Salt Lake City, UT – Fujifilm X-T1

Monochrome

Rebuilt 24 – Farmington, UT – Fujifilm X-T1

Film Simulation: Monochrome (+Y, +R, +G)
Dynamic Range: DR200
Highlight: +1 (Medium-High)
Shadow: +1 (Medium-High)
Sharpness : +1 (Medium -Hard)
Noise Reduction: -2 (Low)
ISO: Auto, up to ISO 6400