SOOC Episode 06 is This Thursday!

Episode 06 of SOOC is this Thursday, December 9, at 9am Pacific Time, 12 PM Eastern! Please note the new time.

For those who may not know, SOOC is a monthly live video series, with each episode focused on a different film simulation recipe. It is a collaboration between Tame Your Fujifilm (Fujifilm X-Photographer Nathalie Boucry) and Fuji X Weekly (Ritchie Roesch). SOOC is a fun and educational experience where we not only talk about Fujifilm camera settings, but also answer your questions and give tips and tricks. Basically, we’re trying to help you master your Fujifilm camera, with a focus on simplifying your photographic workflow. This is an interactive show, so we not only need you to tune in, but your participation is essential to making the episode great.

This month we will discuss the Cross Process film simulation recipe (a fun one, for sure!), as well as look at your photos captured with it—upload your pictures here to be featured in the next video! We’ll also introduce the next recipe. We have a lot of great things planned, and I know you’ll appreciate this one. Episode 06 will be on December 9th, so mark your calendars, and I look forward to seeing you then!

If you missed Episode 05, you can watch it below:

SOOC – SE01E05 – Agfa Optima 200

Episode 05 of SOOC was yesterday—I had a great time, and I hope you did, too. I want to give a big “Thank You” to everyone who tuned in and participated—you are the ones who make these episodes great! If you missed it when it was live, you can still watch it (above). We had some technical difficulties (related to a power outage) at the beginning, so (as of this moment) the show doesn’t start until about the 8-minute-mark. We’ll get this cleaned up shortly, but for now, just skip ahead a few minutes. Despite the problems at the start, a hundreds of you tuned in—I hope you learned something, that you were inspired, and/or that it was entertaining enough to make it worthwhile. Asking for nearly two hours of your time is a lot, and we really appreciate everyone who journeyed along with us!

For those who may not know, SOOC is a monthly live video series, with each episode focused on a different film simulation recipe. It is a collaboration between Tame Your Fujifilm (Fujifilm X-Photographer Nathalie Boucry) and Fuji X Weekly (Ritchie Roesch). SOOC is a fun and educational experience where we not only talk about Fujifilm camera settings, but also answer your questions and give tips and tricks. Basically, we’re trying to help you master your Fujifilm camera, with a focus on simplifying your photographic workflow.

In this month’s episode we discussed my Agfa Optima 200 film simulation recipe, and viewed the wonderful pictures that you captured with this recipe. We also introduced the next recipe: Cross ProcessUpload your pictures here to be featured in the next video! Episode 06 will be on December 9th, so mark your calendars, and I look forward to seeing you then!

If you haven’t watched the previous episodes, then get yourself comfortable, grab a beverage of choice, and click the links below!

Episode 01: Introduction

Episode 02: Kodachrome II

Episode 03: Fujicolor C200

Episode 04: Kodacolor

Episode 05: Agfa Optima 200

Also, be sure to check out the Viewer’s Images slideshows!

Viewer’s Images: Kodachrome II

Viewer’s Images: Fujicolor C200

Viewer’s Images: Kodacolor

SOOC Episode 04: Kodacolor

Episode 04 of SOOC was this morning. I want to give a big “Thank You” to everyone who tuned in and participated—you are the ones who make these episodes great! If you missed it when it was live, you can still watch it (above). We ran a little long (almost two hours!), but I hope you learned something, that you were inspired, and/or that it was entertaining enough to make it worthwhile. Asking for two hours of your time is a lot, and we really appreciate everyone who journeyed along with us today!

For those who may not know, SOOC is a monthly live video series, with each episode focused on a different film simulation recipe. It is a collaboration between Tame Your Fujifilm (Fujifilm X-Photographer Nathalie Boucry) and Fuji X Weekly (Ritchie Roesch). SOOC is a fun and educational experience where we not only talk about Fujifilm camera settings, but also answer your questions and give tips and tricks. Basically, we’re trying to help you master your Fujifilm camera, with a focus on simplifying your photographic workflow.

In this month’s episode we discussed my Kodacolor film simulation recipe, and viewed the wonderful pictures that you captured with this recipe. We also introduced the next recipe: Agfa Optima 200. Upload your pictures here to be featured in the next video! Episode 05 will be on November 18th, so mark your calendars, and I look forward to seeing you then!

If you appreciated Episode 04, be sure to hit the “thumbs up” button on YouTube. Also, help us spread the word by sharing the video on your social media accounts. Thanks so much!

Video: Horseshoe Bend + Fujifilm X-E4 + Pergear 10mm

Check out this quick video where I use a Pergear 10mm f/8 Fisheye on my Fujifilm X-E4 at the Horseshoe Bend overlook near Page, Arizona. The film simulation recipe that I used was The Rockwell (find it on the app!).

While I’d passed this famous photographic landmark a handful of times, this was the first time that I’d actually stopped to take a look myself. It’s a part of the Glen Canyon National Recreation Area, and sits a little ways northeast of the Grand Canyon and just southwest of Lake Powell.

Despite visiting during the “off season” it was surprisingly crowded. There’s a small entrance fee, and it seems well maintained. A well-marked trail leads to an epic overlook of the Colorado River. The steep drop-off has railings at one spot but otherwise there’s nothing to keep visitors from falling except for good sense—it didn’t seem as though everyone was exercising good sense while I was there. The red rocks were dusted in red sand, making footing unsteady at times. Be careful if you should visit.

The reward is an incredibly amazing view! There’s a similarly amazing place in this region called Goosenecks State Park that’s much less crowded, which is briefly featured at the beginning of my Monument Valley video. If you have a chance to visit Horseshoe Bend or The Goosenecks, be sure to do so. Don’t wait until the seventh or eighth time passing by before finally getting out of the car and heading down the trail. It’s worth your time, and your photographic attention.

Abandoned Location: Hugh’s RV w/ Fujifilm X100V & Fujicolor Reala 100 (Video)

I had the opportunity recently to photograph the abandoned Hugh’s RV in North Salt Lake, Utah, with Fuji X Weekly reader Ryan from Oregon. The last time that I was there I used my Kodak Portra 400 film simulation recipe. This time, both Ryan and I used my Fujicolor Reala 100 film simulation recipe on our Fujifilm X100V cameras. Two photographers at the same location using the same camera with the same settings, but with different perspectives. Check out the video!

I had a great time shooting with Ryan! It was a good opportunity to talk cameras, recipes, photography, and more. I want to give a special “thank you” to Ryan for participating in this adventure, for allowing himself to be filmed, and for sharing his pictures in the video. Please check out his Instagram account, as his pictures are great!

Let me know in the comments what you think of the video. I appreciate the feedback!

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Gear:
Fujifilm X100V  Amazon  B&H
Fujifilm X-T20   Amazon 
Fujifilm X-T30  Amazon  B&H
Fujinon 10-24mm   Amazon  B&H
Rokinon 12mm   Amazon  B&H
GoPro Hero 8 Black   Amazon  B&H

New Video: Fuji Film Simulation – Fujicolor Superia 100

I published a new video on the Fuji X Weekly YouTube Channel! This one showcases my Fujicolor Superia 100 film simulation on my Fujifilm X100V while at a local amusement park. I think it turned out pretty well, and it’s worth your time to watch. My wife, Amanda, shot all the footage and did all of the editing. I captured all of the photographs and did the narration. Check it out! Let me know what you think of it.

Fuji Film Simulation: Fujicolor 100 Industrial (Video)

I posted a new video to the Fuji X Weekly YouTube channel! This is a new series called Fuji Film Simulation, which is sort of the video version of my Film Simulation Reviews. It’s my way of demonstrating how you can use my different recipes in various situations. In this episode I walk around the University of Utah campus in Salt Lake City using my Fujicolor 100 Industrial film simulation recipe on my Fujifilm X-T30 with a Fujinon 35mm f/2 lens.

The first part of the video, which is right after the super cool intro sequence, is just me talking about this blog, how I got started in photography, my gear, film simulations and so forth. I hope that you find it interesting. Where I walk around the college campus begins at the 3:12 mark. This might be my favorite section of the episode! Be sure to watch to the end.

My wife, Amanda, made this video. The photographs are mine, but all of the footage was captured by her using a Fujifilm X-T20 and a GoPro Hero 8 Black. She did all of the editing. She did such a great job! Really, it turned out better than I hoped it would. She far exceeded my expectations when she showed me the finished video.

I invite you to watch this episode, which you’ll find at the top of this article. If you liked it, I invite you to give it a thumbs up, share and subscribe. I appreciate any feedback that you might have. Let me know what you think!