Film Simulation Settings | FUJI X WEEKLY

Fujifilm X100V Film Simulation Recipe: Bleach Bypass

Posted on July 8, 2020 by Ritchie Roesch

Rose on a Table – Farmington, UT – Fujifilm X100V – “Bleach Bypass”

The Fujifilm X-T4 has a new film simulation called Bleach Bypass. At this time, the X-T4 is the only camera that has it. It might come to the X-Pro3 and X100V at some point via a firmware update, but it’s difficult to know for sure if or when that will happen. Hopefully Fujifilm will add Bleach Bypass to the other cameras at some point.

Back in February I created a “Bleach Bypass” film simulation recipe for the X-T30 and X-T3 utilizing the double-exposure feature of the camera. The results are great, but the process is tricky, and the subject has to be completely still because it requires two exposures. The Fujifilm X100V and X-Pro3 cameras don’t (yet) have the new Bleach Bypass film simulation, but they do have the new Classic Negative film simulation, which makes a “bleach bypass” look possible with just one exposure.

Bleach bypass is a darkroom technique where you skip or limit the bleach during development of color film, which causes it to retain the silver. Results will vary greatly depending on the film used and exactly how you develop it, but generally speaking what you get with bleach bypass is a high-contrast, low-saturation, grainy picture that appears as if a black-and-white and color picture were combined together. This technique is more common for motion picture film than still photography, but some people do bleach bypass with C-41 film.

Thistle Color – Fruit Heights, UT – Fujifilm X100V – “Bleach Bypass”

I don’t know how accurate this recipe is to the Bleach Bypass film simulation that’s on the X-T4. I wasn’t trying to mimic that film simulation, but instead mimic actual bleach bypass film. I know some of you will really appreciate this look, but it’s certainly not going to be everyone’s cup of tea. You can use this recipe if you have a Fujifilm X100V, X-Pro3 or X-T4.

Classic Negative
Dynamic Range: DR100
Highlight: +2
Shadow: +4
Color: -4
Noise Reduction: -4
Sharpening: -1
Clarity: +3
Grain Effect: Strong, Large
Color Chrome Effect: Weak
Color Chrome Effect Blue: Strong
White Balance: Daylight, -1 Red & +1 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs using this “Bleach Bypass” film simulation recipe on my Fujifilm X100V:

Silver Aspen Leaves – Farmington, UT – Fujifilm X100V

Greenberries – Farmington, UT – Fujifilm X100V

Back Wall – Fruit Heights, UT – Fujifilm X100V

Turkey – Farmington, UT – Fujifilm X100V

Umbrella Below a Tree – Fruit Heights, UT – Fujifilm X100V

Instamatic Light – Farmington, UT – Fujifilm X100V

Kodak Instamatic Shelf – Farmington, UT – Fujifilm X100V

Pronto Polaroid – Farmington, UT – Fujifilm X100V

Dead Yellow Roses – Farmington, UT – Fujifilm X100V

Coffee & Book – Farmington, UT – Fujifilm X100V

Morning Time – Farmington, UT – Fujifilm X100V

Vase on a Table – Farmington, UT – Fujifilm X100V

Suburban Grey – Farmington, UT – Fujifilm X100V

Leaf in the Wet Grass – Farmington, UT – Fujifilm X100V

Water on a Red Slide – Farmington, UT – Fujifilm X100V

Lavender Lily – Farmington, UT – Fujifilm X100V

Sunlight in the Trees – Layton, UT – Fujifilm X100V

See also: Film Simulation Recipes

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black Amazon B&H
Fujifilm X100V Silver Amazon B&H

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There's a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$5.00

Sepia: The Forgotten Film Simulation

Posted on July 1, 2020 by Ritchie Roesch

No Credit Tires – Bountiful, UT – Fujifilm X-T30 & Fujinon 35mm f/2 – Sepia

Sepia is Fujifilm’s forgotten film simulation. Despite being included on every X camera since the original X100, very few people use it. Some photographers mock the Sepia film simulation, calling it gimmicky or amateurish. It’s even been the butt of jokes. There seems to be no love for it. I believe that the Sepia film simulation is misunderstood and underappreciated, and it deserves more respect.

You might be surprised to learn that actual sepia is a byproduct of cuttlefish, and it’s been a part of photography for over 150 years. Sepia is used for its archival properties. When black-and-white photographic prints are given a sepia bath, it stabilizes the silver, which slows the aging process. It also stains the paper, producing a brownish-red tone. The longer the paper sits in a sepia bath, the stronger the sepia tone will be. Some photographers would leave their prints in the bath for a long time, producing a pronounced tint. Many years ago when I printed my own black-and-white pictures in a darkroom, I would only give my pictures a quick dip in sepia, which would produce a very subtle warm tone. Sepia has both form and function in the photographic process.

The majority of black-and-white photographers used sepia, although many preferred a short bath for subtle effect; however, some wanted the full sepia aesthetic with it’s pronounced warm tones. There have been different eras in photography when a strong sepia stain was in vogue. You can change the emotion of a black-and-white photograph by toning it, so it’s no surprise that a warm tone would be popular. Even when it wasn’t popular, there were still some photographers who would purposefully use sepia for artistic effect.

Snow on Rudy Drain – Salt Lake City, UT – Fujifilm X-T1 & Fujinon 35mm f/2 – Sepia

Even though film photography is much less prevalent now, sepia is still being used today in analog black-and-white printing. It’s unnecessary in digital photography, but Fujifilm has provided an easy solution for simulating the effect: the Sepia film simulation. Specifically, it mimics the look of a black-and-white print that’s spent some time in a sepia bath. Some might call it “old timey” in appearance; yes, sepia has been used in photography for a very long time, yet it is still being used today. Maybe it’s not so gimmicky and amateurish after all.

You know that I love to create film simulation recipes that produce straight-out-of-camera results which mimic analog aesthetics. I have created many different color and black-and-white recipes for Fujifilm cameras, and in the process used all of the different film simulation options that Fujifilm provides on their cameras, except for one: Sepia. This is the first time that I’ve used the Sepia film simulation as the basis for a recipe. I love the feeling that these settings produce in an image; there’s a certain emotional response to Sepia that’s not found in the Acros or Monochrome film simulations. I invite you to try these settings for yourself, and perhaps you’ll discover a newfound respect for the lowly Sepia film simulation.

Sepia film simulation recipe for the X100V, X-Pro3 and X-T4:

Sepia
Dynamic Range DR400
Highlight & Shadow: +3
Grain: Strong, Large
Color Chrome Effect & Color Chrome Effect Blue: Off
Clarity: +2
Sharpening: -2
Noise Reduction: -4

Example photographs:

Sepia Sun – Farmington, UT – Fujifilm X100V

Broken Barrier – Kaysville, UT – Fujifilm X100V

Espresso Yourself – Layton, UT – Fujifilm X100V

Sepia film simulation recipe for X-Trans III plus X-T3 and X-T30 cameras:

Sepia
Dynamic Range: DR400
Highlight & Shadow: +3
Grain: Strong
Color Chrome: Off or N/A
Sharpening: -2
Noise Reduction: -4

Example photographs:

Lens in the Window Light – South Weber, UT – Fujifilm X-T30 & Fujinon 90mm f/2

Chair Light & Shadow Abstract – South Weber, UT – Fujifilm X-T30 & Fujinon 35mm f/2

Night Pump – Centerville, UT – Fujifilm X-T30 & Asahi Super-Takumar 28mm f/3.5

Sepia film simulation recipe for X-Trans I & II plus Bayer cameras:

Sepia
Dynamic Range DR200
Highlight & Shadow: +2
Sharpening: -1
Noise Reduction: -2

Example photographs:

Cup of Beans – South Weber, UT – Fujifilm X-T1 & Fujinon 35mm f/2

Selfie – Uintah, UT – Fujifilm X-T1 & Fujinon 35mm f/2

Suburban Pond in Winter – Farmington, UT – Fujifilm X-T1 & Fujinon 35mm f/2

Help Fuji X Weekly

$5.00

Fujifilm X100V Film Simulation Recipe: Fujicolor Superia 1600

Posted on June 29, 2020 by Ritchie Roesch

Red Rose – Farmington, UT – Fujifilm X100V – “Fujicolor Superia 1600”

For some of you, this new Fujicolor Superia 1600 film simulation recipe will be your favorite! It is so good! It’s very analog-esque, and does a great job of mimicking the film in a number of circumstances. If you love my Fujicolor Superia 100 and my Fujicolor Reala 100 recipes, you’re bound to love this one, too!

For high-ISO color photography, Superia 1600 film was your best bet if you needed to go faster than ISO 800. It has higher contrast and lower saturation than other Superia films, and is also more grainy, but with a very nice look. There are people who use Superia 1600 just for its aesthetic. Fujifilm discontinued Superia 1600 in 2016, but supposedly Fujicolor Natura 1600 and Press 1600 are the same film, just sold to different markets.

Sephora – Farmington, UT – Fujifilm X100V – “Fujicolor Superia 1600”

I didn’t include a “typical” exposure compensation with this recipe because you can get some very interesting looks by underexposing and (especially) overexposing—don’t be afraid to try -1 all the way to +2! This recipe is only compatible with the Fujifilm X100V, X-Pro3 and X-T4 (hopefully someday the X-T3 and X-T30, too—Fujifilm, please!).

Classic Negative
Dynamic Range: DR400
Highlight: 0
Shadow: +2
Color: -3
Noise Reduction: -4
Sharpening: -1
Clarity: -4
Grain Effect: Strong, Large
Color Chrome Effect: Strong
Color Chrome Effect Blue: Strong
White Balance: Daylight, +3 Red & +1 Blue
ISO: 1600 to 6400

Example photographs, all camera-made JPEGs using this Fujicolor Superia 1600 film simulation recipe on my Fujifilm X100V:

Electric Sunset – Kaysville, UT – Fujifilm X100V

Evening Overlook – Farmington, UT – Fujifilm X100V

Sunlight Tree – Farmington, UT – Fujifilm X100V

Country Fence – Kaysville, UT – Fujifilm X100V

Rose Bush Shadow – Farmington, UT – Fujifilm X100V

Red Rose Bush – Farmington, UT – Fujifilm X100V

Yellow Flower – South Ogden, UT – Fujifilm X100V

Not Yet Blackberries – Farmington, UT – Fujifilm X100V

Backyard Girl – Farmington, UT – Fujifilm X100V

Evening Light Tunnel – Farmington, UT – Fujifilm X100V

Building in Evening Light – Farmington, UT – Fujifilm X100V

Head On Illusion – Farmington, UT – Fujifilm X100V

Walking Reflection – Farmington, UT – Fujifilm X100V

Indoor/Outdoor Restaurant – Farmington, UT – Fujifilm X100V

Carbonaro – Farmington, UT – Fujifilm X100V

Vegetables – Farmington, UT – Fujifilm X100V

Dessert – Farmington, UT – Fujifilm X100V

Willards – Layton, UT – Fujifilm X100V

Thank You For You Patronage – South Ogden, UT – Fujifilm X100V

Wall Pipes – South Ogden, UT – Fujifilm X100V

Closed Gas Station Store – South Ogden, UT – Fujifilm X100V

Abandoned Drive Thru Window – South Ogden, UT – Fujifilm X100V

Abandoned Gas Station Overhang – South Ogden, UT – Fujifilm X100V

Light at the Top – Farmington, UT – Fujifilm X100V

Blue in the Middle – Farmington, UT – Fujifilm X100V

Moon Above – Farmington, UT – Fujifilm X100V

Suburban Sunstar – Farmington, UT – Fujifilm X100V

Bike 48 – Farmington, UT – Fujifilm X100V

Sunstar in the City – Farmington, UT – Fujifilm X100V

Strength and Endurance – Farmington, UT – Fujifilm X100V

See also: Film Simulation Recipes

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black Amazon B&H
Fujifilm X100V Silver Amazon B&H

Help Fuji X Weekly

$5.00

Fujifilm X-T20 (X-Trans III) Film Simulation Recipe: Cine Teal

Posted on June 25, 2020 by Ritchie Roesch

Garden Flowers Bloomed – Farmington, UT – Fujifilm X-T20 – “Cine Teal”

My Fujifilm X100V “Cine Teal” film simulation recipe has been a lot more popular than I expected it to be. It requires the Eterna film simulation, plus some other settings only found on the newest Fujifilm models. I’ve been asked by a few people to create a “Cine Teal” recipe for X-Trans III cameras, which don’t have that film simulation and those new options, so I did! This recipe woks best during the “Blue Hour” of dusk and dawn, in shade and on overcast days.

PRO Neg. Std
Dynamic Range: DR400
Highlight: -1
Shadow: +3
Color: -3
Noise Reduction: -3
Sharpening: -1
Grain Effect: Weak
White Balance: 4500K, +2 Red & -8 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: +2/3 to +1 (typically)

Example photos, all straight-out-of-camera JPEGs captured on a Fujifilm X-T20 using this “Cine Teal” Film Simulation recipe:

Upside-Down Umbrella – Farmington, UT – Fujifilm X-T20

Green Tree & House – Farmington, UT – Fujifilm X-T20

Been Better – Farmington, UT – Fujifilm X-T20

Spring Leaves – Farmington, UT – Fujifilm X-T20

Tree Leaves Green – Farmington, UT – Fujifilm X-T20

Lavender Bloom – Farmington, UT – Fujifilm X-T20

Pine & Rock – Farmington, UT – Fujifilm X-T20

These settings also work on the Fujifilm X-T30 and X-T3, just set Color Chrome Effect to Off. I captured the photographs below on my X-T30 using this “Cine Teal” film simulation recipe:

Hazy Light Through The Tree – Farmington, UT – Fujifilm X-T30

Mountain Pines – Francis Peak, UT – Fujifilm X-T30

Mountain Ridge – Francis Peak, UT – Fujifilm X-T30

Mountain Radar – Francis Peak, UT – Fujifilm X-T30

Dusting Snow & Clouds – Farmington, UT – Fujifilm X-T30

Clouds Around The Mountains – Farmington, UT – Fujifilm X-T30

Spirit of Photography – Farmington, UT – Fujifilm X-T30

Stairs & Reflection – Salt Lake City, UT – Fujifilm X-T30

Morning Light & Shadows – Salt Lake City, UT – Fujifilm X-T30

Film – Salt Lake City, UT – Fujifilm X-T30

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

Fujifilm X100V Film Simulation Recipe: Fujicolor Reala 100

Posted on June 20, 2020 by Ritchie Roesch

Amusement Poles – Farmington, UT – Fujifilm X100V – “Fujicolor Reala 100”

Fujicolor Reala 100 was Fujifilm’s first Superia film, even though initially it did not have Superia in the name. Superia films shared Fuji’s “4th layer technology” and Reala was the first to have it, but Reala was marketed towards “pro” photographers while Superia was marketed towards “consumer” photographers. Eventually Fujifilm added Superia to Reala’s name. There were several different versions of Reala manufactured, including a high-ISO Tungsten one made for motion pictures, but Reala 100 was the most popular.

The Classic Negative film simulation is “modeled after” Superia with “Superia-like” colors, so it’s the best starting point for a Reala recipe. Reala 100 was very similar to Superia 100, but Superia 100 was intended for “general purpose” photography while Reala 100 was intended for portrait photography (interestingly, my wedding photos were shot on Reala). Colors are rendered a little differently between the two films, especially blue, which is deeper and more saturated on Reala, despite Reala being overall slightly less saturated than Superia 100. You’ll find that this recipe and my Fujicolor Superia 100 recipe replicate these differences quite nicely. Reala film was discontinued in 2013.

Tunnel & Fountain – Farmington, UT – Fujifilm X100V – “Fujicolor Reala 100”

This Fujicolor Reala 100 film simulation recipe is a great all-around option. It looks good under many circumstances. The aesthetic of this recipe is very close to my Superia 100 recipe, and I’m not sure which one I like better. This one is better for stronger blues, and the other is better for stronger reds, but they’re not far apart from each other. Unfortunately, as of this writing, this Reala recipe is only compatible with the Fujifilm X100V, X-Pro3 and X-T4 cameras.

Classic Negative
Dynamic Range: DR400
Highlight: -1
Shadow: -1
Color: +0
Noise Reduction: -4
Sharpening: -2
Clarity: -3
Grain Effect: Weak, Small
Color Chrome Effect: Strong
Color Chrome Effect Blue: Strong
White Balance: Daylight, 0 Red & 0 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: 0 to +1 (typically)

Example photographs, all camera-made JPEGs using this Fujicolor Reala 100 film simulation recipe on my Fujifilm X100V:

Ferris Wheel – Farmington, UT – Fujifilm X100V

Ferris Wheel Through The Trees – Farmington, UT – Fujifilm X100V

Hands Raised – Farmington, UT – Fujifilm X100V

Blue Coaster – Farmington, UT – Fujifilm X100V

Waterless Waterslides – Farmington, UT – Fujifilm X100V

Umbrella Ride – Farmington, UT – Fujifilm X100V

Green Trees, Blue Sky – Farmington, UT – Fujifilm X100V

Cat Statue – Farmington, UT – Fujifilm X100V

Ride Operator – Farmington, UT – Fujifilm X100V

Waiting to Fly – Farmington, UT – Fujifilm X100V

Sunstar Tree – Farmington, UT – Fujifilm X100V

Backlit Fountain – Farmington, UT – Fujifilm X100V

Flowerbed – Farmington, UT – Fujifilm X100V

Field of Wildflowers – Farmington, UT – Fujifilm X100V

Potted Blooms – Farmington, UT – Fujifilm X100V

Flowers in a Garden – Farmington, UT – Fujifilm X100V

Blossoms Along a Fence – Farmington, UT – Fujifilm X100V

Red Blossoms – Farmington, UT – Fujifilm X100V

Covered Wagon – Farmington, UT – Fujifilm X100V

Man Waiting – Farmington, UT – Fujifilm X100V

Standing, Waiting – Farmington, UT – Fujifilm X100V

Corner – Farmington, UT – Fujifilm X100V

Puddle Reflections – Farmington, UT – Fujifilm X100V

Stroller – Farmington, UT – Fujifilm X100V

Almost – Farmington, UT – Fujifilm X100V

Please Unload Children – Farmington, UT – Fujifilm X100V

Lying on a Bench – Farmington, UT – Fujifilm X100V

Pink Hair Bow – Farmington, UT – Fujifilm X100V

Backpack – Farmington, UT – Fujifilm X100V

Josh Riding Carousel – Farmington, UT – Fujifilm X100V

Happy Jon – Farmington, UT – Fujifilm X100V

Map on a Fence – Farmington, UT – Fujifilm X100V

Woodford, Iowa – Farmington, UT – Fujifilm X100V

Forest Trees – Fruit Heights, UT – Fujifilm X100V

Windshield Rain – Fruit Heights, UT – Fujifilm X100V

See also: Film Simulation Recipes

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black Amazon B&H
Fujifilm X100V Silver Amazon B&H

Help Fuji X Weekly

$5.00

Fujifilm X100V Film Simulation Recipe: Kodak Tri-X 400

Posted on June 18, 2020 by Ritchie Roesch

Leaves in the Forest – Farmington, UT – Fujifilm X100V – ISO 3200 – “Kodak Tri-X 400”

The number one black-and-white film simulation recipe that I’ve been asked to create is Kodak Tri-X 400, but I’ve never been satisfied with my own attempts. Thankfully for you, Fuji X Weekly reader Anders Lindborg (Instagram) was able to do it! This is brilliant, and I’m sure you’ll love it. It’s the only B&W recipe I’m using on my Fujifilm X100V right now.

Kodak introduced Tri-X in the early 1940’s, and in the 1950’s they began selling it in 35mm format. Ever since, it has been the “standard” high-ISO black-and-white film for photographers. It’s been made in ISO 160, 200, 320 and 400 versions; this recipe is based on Tri-X 400. Kodak re-engineered Tri-X 400 in 2007 with finer grain and lower contrast, but it’s still nearly identical to the old stock.

Anders actually made three recipes in one: low-contrast, mid-contrast, and high-contrast. Tri-X, like most films, can be made more contrasty or less contrasty based on how it’s developed (chemicals used and/or development times) or printed (contrast filters). The recipe further down this article is the mid-contrast version. For low contrast, set Highlight to -1 and Shadow to +2. For high contrast, set Highlight to +1 and Shadow to +4. This film simulation recipe was designed for the X-T3 and X-T30, but I changed a couple of things for the X100V: I set Clarity to +4 (which isn’t available on the X-T3 and X-T30) and Grain to Strong & Large (on the X-T3 and X-T30, Grain is set to Strong). Because it adds contrast, setting Clarity to +4 actually makes this look more like the high-contrast version. If you are using this on the X100V, X-Pro3 or X-T4, feel free to try all three contrast versions, with or without Clarity, to see which you like better. For X-Trans III cameras, which don’t have Color Chrome Effect, you can still use this recipe; while it won’t look exactly the same, it will still look very similar. In other words, even though the title says “Fujifilm X100V Film Simulation Recipe” you can actually use it on any camera with the Acros film simulation—I’ve tried it on an X-T30 and X-T20, and it looks great!

Forest Edge – Fruit Heights, UT – Fujifilm X100V – ISO 1600 – “Kodak Tri-X 400”

I found that this recipe looks best when set to ISO 1600 or higher. From ISO 1600 to 3200, the results more resemble newer Tri-X 400 film. From ISO 6400 to ISO 12800, the results more resemble older Tri-X 400 film. I want to give a big thank-you to Anders Lindborg for creating this recipe, sharing it, and allowing me to publish it here—you are appreciated! Thank you!

Acros (+Y, +R, +G)
Dynamic Range: DR200
Highlight: 0
Shadow: +3
Noise Reduction: -4
Sharpening: +1
Clarity: +4
Grain Effect: Strong, Large
Color Chrome Effect: Strong
Color Chrome Effect Blue: Off
White Balance: Daylight,+9 Red & -9 Blue
ISO: ISO 1600 – 12800
Exposure Compensation: +1/3 to +1 (typically)

Example photographs, all camera-made JPEGs using this Kodak Tri-X 400 film simulation recipe on my Fujifilm X100V:

Fallen Trunk – Fruit Heights, UT – Fujifilm X100V – ISO 1600

The Forest – Fruit Heights, UT – Fujifilm X100V – ISO 1600

Light in a Dark Canopy – Farmington, UT – Fujifilm X100V – ISO 1600

Sunlight & Leaves – Farmington, UT – Fujifilm X100V – ISO 12800

Monochrome Backlit Leaves – Farmington, UT – Fujifilm X100V – ISO 1600

Drops on a Window – Fruit Heights, UT – Fujifilm X100V – ISO 1600

Half Leaf In The Road – Farmington, UT – Fujifilm X100V – ISO 1600

Footstep – Farmington, UT – Fujifilm X100V – ISO 1600

Barrier – Farmington, UT – Fujifilm X100V – ISO 1600

Corner Benches – Farmington, UT – Fujifilm X100V – ISO 6400

Drinking Fountains – Farmington, UT – Fujifilm X100V – ISO 1600

Feel Like A Kid Again – Farmington, UT – Fujifilm X100V – ISO 1600

Walking at an Amusement Park – Farmington, UT – Fujifilm X100V – ISO 1600

Waiting at the Exit – Farmington, UT – Fujifilm X100V – ISO 3200

Diagonal Light Boy – Farmington, UT – Fujifilm X100V – ISO 12800

FED 5c Film Camera – Farmington, UT – Fujifilm X100V – ISO 3200

Coffee Grounds in a Filter – Farmington, UT – Fujifilm X100V – ISO 3200

Rainbow Feet on the Floor – Farmington, UT – Fujifilm X100V – ISO 3200

Girl in Zebra Shirt – Farmington, UT – Fujifilm X100V – ISO 12800

Rainy Day Siblings – Farmington, UT – Fujifilm X100V – ISO 3200

Level Up – Farmington, UT – Fujifilm X100V – ISO 12800

Wet Leaf in the Grass – Farmington, UT – Fujifilm X100V – ISO 5000

Wet Tree Leaves – Farmington, UT – Fujifilm X100V – ISO 3200

Leaf of a Different Color – Farmington, UT – Fujifilm X100V – ISO 3200

Emptiness – Roy, UT – Fujifilm X100V – ISO 3200

Empty Boxes in an Abandoned Home – Roy, UT – Fujifilm X100V – ISO 12800

Nobody’s Home – Roy, UT – Fujifilm X100V – ISO 3200

White Truck – Roy, UT – Fujifilm X100V – ISO 3200

Dead End Night – Roy, UT – Fujifilm X100V – ISO 12800

Trolley Bus – Farmington, UT – Fujifilm X100V – ISO 12800

Wrong Way – Centerville, UT – Fujifilm X100V – ISO 12800

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black Amazon B&H
Fujifilm X100V Silver Amazon B&H

Help Fuji X Weekly

$5.00

Fujifilm X-T1 (X-Trans II) Film Simulation Recipe: “Eterna”

Posted on June 11, 2020 by Ritchie Roesch

Lavender – Farmington, UT – Fujifilm X-T1 – “Eterna”

I haven’t forgotten about my Fujifilm X-T1! My last five film simulation recipes have been for my new X100V, but I will continue making recipes for other sensors. Not everyone, probably not most Fujifilm X shooters, have the latest models, so the recipes for those cameras are irrelevant to many Fuji X Weekly readers. There will still be many articles related to the X100V, but I will continue to publish articles about other Fujifilm cameras, too. I’ll try to keep things balanced.

This “Eterna” film simulation recipe is my best facsimile of my X-T30 Eterna recipe. Obviously X-Trans II cameras don’t have the Eterna film simulation, as well as other options that the X-T30 has. It’s impossible to make an exact match, but this one is surprisingly pretty close. It looks nothing like straight-out-of-the-box Eterna, but it resembles pretty closely my Eterna recipe, which requires some big adjustments to various settings.

Red Blooms – Farmington, UT – Fujifilm X-T1 – “Eterna”

My X-T1 “Eterna” recipe has a strong warm color cast, and it has a fair amount of contrast. It reminds me of Kodak Gold printed on Kodak paper, but I’m sure it’s not an exact match for that, just a general impression. This recipe is not for every situation, but it can look great for certain pictures.

PRO Neg. Std
Dynamic Range: DR100
Highlight: +2 (High)
Shadow: +1 (Medium-High)
Color: +2 (High)
Sharpness: +1 (Medium-High)
Noise Reduction: -2 (Low)
White Balance: Auto, +6 Red & -7 Blue
ISO: Auto, up to ISO 3200
Exposure Compensation: -1/3 to +1/3 (typically)

Example photographs, all camera-made JPEGs using this “Eterna” recipe on my Fujifilm X-T1:

Yellow Truck with Red Graffiti – Salt Lake City, UT – Fujifilm X-T1

Empty Trailers – Salt Lake City, UT – Fujifilm X-T1

Evening Thistle – Salt Lake City, UT – Fujifilm X-T1

Someone’s Watching – Salt Lake City, UT – Fujifilm X-T1

Authorized Persons and Vehicles Only – Salt Lake City, UT – Fujifilm X-T1

Bike Lane Ends – Salt Lake City, UT – Fujifilm X-T1

Stump by the Water – Salt Lake City, UT – Fujifilm X-T1

Pole Reflection – Salt Lake City, UT – Fujifilm X-T1

Sunstar Tree – Salt Lake City, UT – Fujifilm X-T1

Empty Bench – Salt Lake City, UT – Fujifilm X-T1

Ford 250 – Salt Lake City, UT – Fujifilm X-T1

SkyWest – Salt Lake City, UT – Fujifilm X-T1

Statue Girl on Bench – Farmington, UT – Fujifilm X-T1

Shadow Stripes – Salt Lake City, UT – Fujifilm X-T1

Toes & Couch – Farmington, UT – Fujifilm X-T1

Josh in the Window Light – Farmington, UT – Fujifilm X-T1

Kitchen Succulent – Farmington, UT – Fujifilm X-T1

Tree Branch Blossoms – Farmington, UT – Fujifilm X-T1

Cloud Above The Mountain Ridge – Farmington, UT – Fujifilm X-T1

Mountain Tree – Farmington, UT – Fujifilm X-T1

Tree Top – Farmington, UT – Fujifilm X-T1

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

Fujifilm X100V Film Simulation: Kodak Portra 400

Posted on June 10, 2020 by Ritchie Roesch

Bridge Over Stream – Layton, UT – Fujifilm X100V – “Kodak Portra 400”

This is a brand-new version of my X-T30 Kodak Portra 400 film simulation recipe, designed specifically for the Fujifilm X100V, X-Pro3 and X-T4. My “old” recipe isn’t, in fact, old, as I published it only one month ago, but already I have improved on it, thanks to Fujifilm’s new tools, and also thanks to Fuji X Weekly reader Thomas Schwab, who helped tremendously refine the recipe to be more accurate to actual Portra 400 film. You see, he captured some pictures with Portra 400 film and made some identical pictures with his X-Pro3. After a few small changes, this new recipe emerged. It’s very similar to the X-T30 Portra 400 recipe, the differences aren’t huge, but it is subtly better in my opinion.

Portra 400 was introduced by Kodak in 1998, and was redesigned in 2006 and again in 2010. As the name implies, it’s intended for portrait photography, but can be used for many other types of photography. It’s similar to Portra 160, but with more contrast, saturation and grain. Believe it or not, ISO 400 was considered “high ISO” by many photographers back in the film days, and Portra 400 was one of the absolute best “high ISO” color films ever made. Like all films, results can vary greatly depending on how it’s shot, developed and printed or scanned, and even which version of the film you’re talking about.

Backlit Forest Leaves – Layton, UT – Fujifilm X100V – “Kodak Portra 400”

This new Portra 400 film simulation recipe requires the use of Clarity, which slows down the camera considerably. Fujifilm suggests shooting RAW and adding Clarity later, but I just use the pause to slow myself down. The use of Clarity also means that this recipe can’t be used on “older” cameras, only the X100V, X-Pro3 and X-T4 (as of this writing), but feel free to apply the white balance shift of this recipe to the X-T30 version and see if you like it better.

Classic Chrome
Dynamic Range: DR-Auto
Highlight: -1
Shadow: -2
Color: +2
Noise Reduction: -4
Sharpening: -2
Clarity: +2
Grain Effect: Strong, Small
Color Chrome Effect: Strong
Color Chrome Effect Blue: Weak
White Balance: Daylight, +3 Red & -5 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: +1/3 to +1 (typically)

Example photographs, all camera-made JPEGs using this new Kodak Portra 400 film simulation recipe on my Fujifilm X100V:

Light Green Leaves – Layton, UT – Fujifilm X100V

Sunlight In The Tree – Layton, UT – Fujifilm X100V

Forest – Layton, UT – Fujifilm X100V

Creek Through The Trees – Layton, UT – Fujifilm X100V

Light on the Water – Layton, UT – Fujifilm X100V

Creek – Layton, UT – Fujifilm X100V

Big Green Leaf – Layton, UT – Fujifilm X100V

Sunshine & Tree Leaves – Farmington, UT – Fujifilm X100V

Sunlit – Farmington, UT – Fujifilm X100V

Stone & Blooms – Layton, UT – Fujifilm X100V

Jo Swinging – Layton, UT – Fujifilm X100V

Brother & Sister Driving – Farmington, UT – Fujifilm X100V

Protect & Serve – Farmington, UT – Fujifilm X100V

Seagull on a Lamp – Farmington, UT – Fujifilm X100V

Stormy Reeds – Farmington, UT – Fujifilm X100V

See also: Film Simulation Recipes

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black Amazon B&H
Fujifilm X100V Silver Amazon B&H

Help Fuji X Weekly

$5.00

My Fujifilm X100V Cine Teal Film Simulation Recipe

Posted on June 8, 2020 by Ritchie Roesch

Red Lights & Raindrops – Farmington, UT – Fujifilm X100V – “Cine Teal”

Baseball legend Lefty Gomez said, “I’d rather be lucky than good.” This particular film simulation recipe was a failure, but it was a lucky failure. I’ve been trying to create a Kodak Vision3 500T recipe, but I can’t get it right. I’ve tried a number of different combinations of settings, but I haven’t cracked the code (yet). This was one attempt. Under the right light, it does resemble Vision3 500T, but under most conditions it does not. Even though it was a failure, I like the look of this recipe, so I thought I’d share it with you.

I call this new film simulation recipe “Cine Teal” because it looks a bit cinematic thanks to the Eterna film simulation, and has a teal, green or yellow cast, depending on the light. This recipe looks best when used in the “blue hour” of dusk or dawn, and does well in shade and on overcast days. It can be used in other situations, but the results tend to be so-so, although you can still get interesting pictures sometimes. This recipe is a little limited in where it works best, but in the right situations it can look very nice. It’s not for everyone, but some of you will really appreciate it.

Sunlit Tree Leaves – Farmington, UT – Fujifilm X100V – “Cine Teal”

Because this film simulation recipe requires the use of Clarity, it will slow your camera down considerably. Fujifilm suggests, if you shoot RAW+JPEG, to add Clarity later by reprocessing the RAW file in-camera or with X RAW Studio. I just use the pause to slow myself down. This recipe is only compatible (as of this writing) with the Fujifilm X100V, X-Pro3 and X-T4.

Eterna
Dynamic Range: DR200
Highlight: -2
Shadow: +4
Color: -1
Noise Reduction: -4
Sharpening: -2
Clarity: -5
Grain Effect: Weak, Large
Color Chrome Effect: Weak
Color Chrome Effect Blue: Strong
White Balance: 4550K, +1 Red & -9 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs using this “Cine Teal” film simulation recipe on my Fujifilm X100V:

Small Garden Flowers – Farmington, UT – Fujifilm X100V

Roses Red – Farmington, UT – Fujifilm X100V

Roses are Red – Farmington, UT – Fujifilm X100V

Waiting Wishes – Farmington, UT – Fujifilm X100V

Subtle Rays – Farmington, UT – Fujifilm X100V

Cloud & Half Moon – Farmington, UT – Fujifilm X100V

Suburban Cloud – Farmington, UT – Fujifilm X100V

Evening House – Farmington, UT – Fujifilm X100V

Shadow of Self – Farmington, UT – Fujifilm X100V

Apple & Bike – Farmington, UT – Fujifilm X100V

Masked Man – Farmington, UT – Fujifilm X100V

Urban Blossoms – Farmington, UT – Fujifilm X100V

Evergreen – Farmington, UT – Fujifilm X100V

Small Table & Chairs – Orem, UT – Fujifilm X100V

Grand Girl – Farmington, UT – Fujifilm X100V

Mischievous Smile – Farmington, UT – Fujifilm X100V

Learning to Play – Farmington, UT – Fujifilm X100V

Lights Off – Farmington, UT – Fujifilm X100V

Coffee Table – Farmington, UT – Fujifilm X100V

Asian Decor – Farmington, UT – Fujifilm X100V

Dining – Farmington, UT – Fujifilm X100V

Hood Ornament – Farmington, UT – Fujifilm X100V

Open for Business – Orem, UT – Fujifilm X100V

FedEx – Farmington, UT – Fujifilm X100V

Movie Theater – Farmington, UT – Fujifilm X100V

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black Amazon B&H
Fujifilm X100V Silver Amazon B&H

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

[Not] My Fujifilm X100V Classic Negative Film Simulation Recipe

Posted on June 1, 2020 by Ritchie Roesch

Boy with a Bubble Gun – Farmington, UT – Fujifilm X100V

When the Fujifilm X-Pro3 came out late last year, which was the first camera with the new Classic Negative film simulation, I began to see some wonderful pictures that looked like they were captured using Superia film. Classic Negative is supposed to resemble Fujicolor Superia, most likely Superia 200, although Fujifilm doesn’t say. I believe there were more than 10 variants of Superia film made by Fujifilm, so it’s hard to know which version the film simulation was mostly modeled after. Whichever version of the film it’s intended to be, Classic Negative does a great job of mimicking it, because it definitely looks like Superia.

The Classic Negative look that was most intriguing to me was by Luis Costa, and I couldn’t wait for the day that I’d be able to try it for myself. Luis’ Classic Negative film simulation recipe, which can be found on his website, is nothing short of wonderful! It’s especially great for sunny days. It’s every bit as good as Luis made it look in his photographs. It’s programmed into the C1 slot on my Fujifilm X100V, and I doubt that it will move. It reminds me a lot of Superia X-Tra 400 with a warming filter, or maybe Superia 200 pushed one stop. Either way, it just looks good.

Warm Light on Reeds – Farmington Bay, UT – Fujifilm X100V

I did modify Luis Costa’s recipe slightly. Nothing big, but I added Color Chrome Effect and Clarity, and set Grain to Weak instead of Strong. It doesn’t change the look much at all. Feel free to turn off Color Chrome Effect and Clarity and set Grain to Strong if you’d like, which is Luis’ exact recipe. I want to thank Luis Costa for making and sharing his great Classic Negative recipe, and for allowing me to post it here. I encourage you to visit his website.

Because the Classic Negative film simulation changes look depending on how it’s exposed, you can get a couple different aesthetics with this recipe. I encourage you to increase exposure on some shots and decrease it on others (over and under exposing slightly), and see how it renders the picture. You might find that you prefer one look over the other, or that you prefer one in some situations and one in another. It’s fun to experiment with, and I invite you to do just that.

Classic Negative
Dynamic Range: DR200
Highlight: +1
Shadow: 0
Color: +3
Noise Reduction: -4
Sharpening: 0
Clarity: +2
Grain Effect: Weak, Large
Color Chrome Effect: Weak
Color Chrome Effect Blue: Weak
White Balance: Auto, +4 Red & -4 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: +1/3 to +2/3 (typically)

Example photographs, all camera-made JPEGs using this Classic Negative film simulation recipe on my Fujifilm X100V:

Red Rose Bush – Farmington, UT – Fujifilm X100V

Flowers by the Fence – Farmington, UT – Fujifilm X100V

Suburban Blooms – Farmington, UT – Fujifilm X100V

Dragonfly – Farmington, UT – Fujifilm X100V

Spring Leaves – Farmington, UT – Fujifilm X100V

Girl in Evening Light – Farmington, UT – Fujifilm X100V

Upside Down Wheelbarrow – Farmington, UT – Fujifilm X100V

Neighborhood Bubbles – Farmington, UT – Fujifilm X100V

Suburbs Illuminated – Farmington, UT – Fujifilm X100V

Boy in the Window Light – Farmington, UT – Fujifilm X100V

Little Yellow Ball in the Sky – Farmington, UT – Fujifilm X100V

Lake Reeds – Farmington Bay, UT – Fujifilm X100V

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black Amazon B&H
Fujifilm X100V Silver Amazon B&H

My Fujifilm X100V Kodachrome 64 Film Simulation Recipe

Posted on May 27, 2020 by Ritchie Roesch

Evening at a Pond – Farmington Bay, UT – Fujifilm X100V “Kodachrome 64”

The Fujifilm X100V has some new features, including Clarity and Color Chrome Effect Blue, that my X-T30 doesn’t have, despite sharing the same sensor. The more JPEG options that I have, the more accurately I can create in-camera looks. My hope is to revisit some of my film simulation recipes, and create what I hope are more accurate versions using the new features. The first one that I revamped is my Kodachrome 64 film simulation recipe.

Many people love my Kodachrome 64 recipe, but not everyone. The biggest complaint that I’ve heard about it is that the reds aren’t vibrant enough. I don’t disagree with that, but there are always compromises when recreating looks in-camera because the tools available to me are limited. Of course, what Kodachrome 64 looks like depends on how you’re viewing it, whether projector, light table, scan, print, and how so. You can find some vastly different looking pictures that were captured on Kodachrome 64. For this revamped recipe, I spent some time studying the Kodachrome slides that I captured many years ago.

Red Lights & Rain – Farmington, UT – Fujifilm X100V “Kodachrome 64”

While I feel that this is an improved Kodachrome 64 recipe, it’s still not perfect. Those who disliked how reds were rendered on the old recipe will certainly like this one better, but is it 100% exactly like the film? No. I think +2 Color might be too much, but +1 Color doesn’t render reds and yellows vibrant enough. If you prefer +1 Color, feel free to do that instead. There’s a little less contrast with this new version. Both of the Color Chrome Effects, the lower Dynamic Range setting, and Clarity add contrast, so I changed Highlight and Shadow to compensate. The X-T4 has .5 Highlight and Shadow adjustments, and I would set Shadow to +0.5 if I were using these settings on that camera (I hope that Fujifilm updates the X100V and X-Pro3 to allow this, too). I think it would be acceptable to use +1 Shadow, but I felt that was a tad too much, so I set it to 0. Despite not being perfect, I do feel that this version is a little more accurate to actual Kodachrome 64 film.

If you have an X100V, X-Pro3 or X-T4, I invite you to try this new-and-improved Kodachrome 64 film simulation recipe. Be sure to let me know what you think! Here are a couple pictures comparing the two versions of this recipes:

Original Kodachrome 64 recipe.

New Kodachrome 64 Recipe.

Original Kodachrome 64 recipe.

New Kodachrome 64 recipe.

Classic Chrome
Dynamic Range: DR200
Highlight: 0
Shadow: 0
Color: +2
Noise Reduction: -4
Sharpening: +1
Clarity: +3
Grain Effect: Weak, Small
Color Chrome Effect: Strong
Color Chrome Effect Blue: Weak
White Balance: Daylight, +2 Red & -5 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs using this new Kodachrome 64 film simulation recipe on my Fujifilm X100V:

White Horse by a Stream – Farmington, UT – Fujifilm X100V

Horses in the Grass – Farmington, UT – Fujifilm X100V

Curious Horse – Farmington, UT – Fujifilm X100V

Country Tires – Farmington, UT – Fujifilm X100V

Yellow Flowers, Blue Sky – Farmington, UT – Fujifilm X100V

Wishful Day – Farmington, UT – Fujifilm X100V

Beer & Board – Farmington, UT – Fujifilm X100V

Road Bicycling – Farmington, UT – Fujifilm X100V

All the World’s a Sunny Day – Farmington, UT – Fujifilm X100V

Orders & Pickup – Farmington, UT – Fujifilm X100V

Red, White & Blue Day – Farmington, UT – Fujifilm X100V

Flag Up Close – Farmington, UT – Fujifilm X100V

Reeds by the Water – Farmington Bay, UT – Fujifilm X100V

Evening Reeds – Farmington Bay, UT – Fujifilm X100V

Landscape Flowers – Farmington, UT – Fujifilm X100V

Handlebar – Farmington, UT – Fujifilm X100V

Kodak Colors – Farmington, UT – Fujifilm X100V

Half of an Orange – Farmington, UT – Fujifilm X100V

Ground Beans – Farmington, UT – Fujifilm X100V

Pallets – Centerville, UT – Fujifilm X100V

IHOP – Centerville, UT – Fujifilm X100V

Cupcake – Farmington, UT – Fujifilm X100V

Sitting on Concrete – Farmington, UT – Fujifilm X100V

Spring Snow – Farmington, UT – Fujifilm X100V

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black Amazon B&H
Fujifilm X100V Silver Amazon B&H

Help Fuji X Weekly

$5.00

Fuji Film Simulation: Fujicolor 100 Industrial (Video)

Posted on May 23, 2020 by Ritchie Roesch

I posted a new video to the Fuji X Weekly YouTube channel! This is a new series called Fuji Film Simulation, which is sort of the video version of my Film Simulation Reviews. It’s my way of demonstrating how you can use my different recipes in various situations. In this episode I walk around the University of Utah campus in Salt Lake City using my Fujicolor 100 Industrial film simulation recipe on my Fujifilm X-T30 with a Fujinon 35mm f/2 lens.

The first part of the video, which is right after the super cool intro sequence, is just me talking about this blog, how I got started in photography, my gear, film simulations and so forth. I hope that you find it interesting. Where I walk around the college campus begins at the 3:12 mark. This might be my favorite section of the episode! Be sure to watch to the end.

My wife, Amanda, made this video. The photographs are mine, but all of the footage was captured by her using a Fujifilm X-T20 and a GoPro Hero 8 Black. She did all of the editing. She did such a great job! Really, it turned out better than I hoped it would. She far exceeded my expectations when she showed me the finished video.

I invite you to watch this episode, which you’ll find at the top of this article. If you liked it, I invite you to give it a thumbs up, share and subscribe. I appreciate any feedback that you might have. Let me know what you think!

My Fujifilm X-T30 Kodak Vision3 250D Film Simulation Recipe

Posted on May 11, 2020 by Ritchie Roesch

Ice Cream Trailer – Farmington, UT – Fujifilm X-T30 “Kodak Vision3 250D”

A Fuji X Weekly reader asked me to create a film simulation recipe that mimics Kodak Vision3 250D motion picture film. Kodak introduced Vision3 250D in 2009. While it’s a color negative motion picture film, it can also be used for still photography. I’ve never used this film, but as I researched it, I came to realize that this one film can produce many different looks, depending on how it’s shot and developed. In fact, you can develop it using either the C-41 or ECN-2 process, and you can even develop it as black-and-white. You can push-process several stops. There’s a lot of latitude for over and under exposure.

As you can imagine, it would be impossible to create a film simulation recipe that mimics every possible look from this film, or even most. I focused in on one specific aesthetic, although I can’t say for sure how that aesthetic was achieved, and made a recipe that mimics it. I think I came pretty darn close. Perhaps more importantly, these settings look good. There’s a certain quality to the pictures made using this recipe that’s especially lovely. Some of you are really going to love these settings!

Flowers on a Tree Branch – Farmington, UT – Fujifilm X-T30 “Kodak Vision3 250D”

Since Kodak Vision3 250D is a motion picture film, I had fun using this film simulation recipe in the 16:9 aspect ratio from time-to-time because it is a more cinematic shape. If you used the film for still photography, most likely the frame would be a 3:2 aspect ratio, which is what I chose for most of these pictures. You can choose any aspect ratio that you’d like. If you have an X-H1, which doesn’t have Color Chrome Effect but does have Eterna, you can still use this recipe, but the results will be slightly different.

Eterna
Dynamic Range: DR100
Highlight: +3
Shadow: +4
Color: +3
Noise Reduction: -4
Sharpening: -2
Grain Effect: Strong
Color Chrome Effect: Strong
White Balance: Fluorescent 1 (Daylight Fluorescent), -3 Red & -1 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: +1/3 to +2/3 (typically)

Below are all camera-made JPEGs captured using this Kodak Vision3 250D Film Simulation recipe on my Fujifilm X-T30 camera:

Blue Bokeh – Farmington, UT – Fujifilm X-T30

Nighttime Fire Hydrant – Farmington, UT – Fujifilm X-T30

Yellow Tree – Farmington, UT – Fujifilm X-T30

Lights Strung Across The Road – Farmington, UT – Fujifilm X-T30

Forever the Perfect Accessory – Farmington, UT – Fujifilm X-T30

Artificial Light Rays – Farmington, UT – Fujifilm X-T30

Reserved Parking – Syracuse, UT – Fujifilm X-T30

Grass by a Waterfall – Syracuse, UT – Fujifilm X-T30

Three Ducks – Farmington, UT – Fujifilm X-T30

Pond – Syracuse, UT – Fujifilm X-T30

Tree & Purple Flowers – Farmington, UT – Fujifilm X-T30

Green Leaves & White Blooms – Farmington, UT – Fujifilm X-T30

Webs in the Grass – Farmington, UT – Fujifilm X-T30

Sky Reeds – Farmington, UT – Fujifilm X-T30

Clouds & Roof – Farmington, UT – Fujifilm X-T30

Chopped Logs – Farmington, UT – Fujifilm X-T30

Fake Flower Decor – Farmington, UT – Fujifilm X-T30

Shy & Uninterested – Farmington, UT – Fujifilm X-T30

Sunglasses Indoors – Farmington, UT – Fujifilm X-T30

Boy in Evening Light – Farmington, UT – Fujifilm X-T30

Beans in the Grinder – Farmington, UT – Fujifilm X-T30

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

My Fujifilm X-T30 Kodak Portra 400 Film Simulation Recipe

Posted on May 10, 2020 by Ritchie Roesch

Around The Bend – Layton, UT – Fujifilm X-T30 “Kodak Portra 400”

Portra 400, which is a color negative film, was introduced by Kodak in 1998. It was redesign in 2006 and again in 2010. As the name implies, it’s intended for portrait photography, but can be used for many other types of photography. It’s similar to Portra 160, but with more contrast, saturation and grain. Believe it or not, ISO 400 was considered “high ISO” by many photographers back in the film days, and Portra 400 was one of the absolute best “high ISO” color films ever made. Like all films, results can vary greatly depending on how it’s shot, developed and printed or scanned, and even which version of the film you’re talking about. Interestingly, Kodak briefly made a black-and-white version of Portra 400!

I’ve been meaning to revisit Kodak Portra 400 for some time now. As you may know, I already have a Kodak Portra 400 recipe, which I created two years ago, but it requires a difficult-to-achieve custom white balance measurement. I was never really satisfied with that recipe, even though it can produce interesting results. I have been eager to create a new Portra 400 recipe, and, In fact, I’ve tried a couple of times, but without success.

Blue Sky Day – Syracuse, UT – Fujifilm X-T30 “Kodak Portra 400”

A Fuji X Weekly reader suggested to me that if I use my Kodak Portra 160 recipe, except increase Shadow, Highlight and Color by one, that should be pretty close to Portra 400. Indeed it is! I liked what I saw, but I played around with the settings more to see if I could improve on it. Turns out not much needed to be tweaked. I liked the results better with Color Chrome Effect set to Strong, but if you have an X-Trans III camera, which doesn’t have that feature, you can still use this recipe, but it will look slightly different. The only other change that I made was I set Grain to Strong.

Classic Chrome
Dynamic Range: DR-Auto
Highlight: -1
Shadow: -1
Color: +2
Noise Reduction: -4
Sharpening: -2
Grain Effect: Strong
Color Chrome Effect: Strong
White Balance: Daylight, +4 Red & -5 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: +2/3 to +1 (typically)

Example photographs, all camera-made JPEGs using this Kodak Portra 400 film simulation recipe on my Fujifilm X-T30:

Mountain in the Evening Light – Farmington, UT – Fujifilm X-T30

Reeds To The Sky – Farmington, UT – Fujifilm X-T30

Jensen Pond – Syracuse, UT – Fujifilm X-T30

Water Beyond The Trees – Layton, UT – Fujifilm X-T30

Paved Trail – Layton, UT – Fujifilm X-T30

Spring Green & White – Layton, UT – Fujifilm X-T30

Fries in the Sky – Syracuse, UT – Fujifilm X-T30

Royal Lunch – Layton, UT – Fujifilm X-T30

Evening Suburban Home – Farmington, UT – Fujifilm X-T30

Boy in the Striped Light – Farmington, UT – Fujifilm X-T30

Boy Sitting – Farmington, UT – Fujifilm X-T30

Sunlight Through The Pink Blooms – Farmington, UT – Fujifilm X-T30

Pink Tree Bloom – Farmington, UT – Fujifilm X-T30

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

My Fujifilm X-T30 Kodacolor II 126 Film Simulation Recipe

Posted on April 28, 2020 by Ritchie Roesch

Blooming Pink – Farmington, UT – Fujifilm X-T30 “Kodacolor II 126”

A Fuji X Weekly reader asked me to recreate the look of some old family prints from the 1970’s that he found. After some investigating, it was determined that the pictures were captured on an Instamatic camera using 126 film (also called Kodapak). 126 film was basically 35mm film, except with a paper back and no sprockets (like 120 film), and in a cartridge that didn’t need to be rewound (similar to 110 film). It was intended for low-budget point-and-shoot cameras, and the cartridge made loading and unloading film easier. Basically, Instamatic was Kodak’s attempt to open up photography to the masses, as it required little to no skill or photographic background. It was very popular in the 1960’s and ’70’s, and became less popular in the 1980’s. A quirk of Instamatic cameras and 126 film is that it captured square pictures.

It’s unknown what film was used on the pictures in question, but most likely it was Kodacolor II, which was by far the most popular color 126 film during the time that these pictures were captured. Kodacolor is a name that Kodak gave to a number of different color negative films going back to the 1940’s. Kodacolor II was the very first C-41 process film. It was introduced in 1972 and discontinued in 1981, replaced by Kodacolor VR, which is the film that my Kodacolor film simulation recipe resembles. The prints likely have some fading and color shifts due to age, but they appeared to be in good condition overall.

Instamatic – Farmington, UT – Fujifilm X-T30 “Kodacolor II 126”

This film simulation recipe, which I’ve called Kodacolor II 126, is a bit unusual in that it is supposed to mimic a look that came from cheap cameras. It calls for Image Quality to be set to Normal instead of Fine (I normally use Fine). The only other recipe that I’ve done this with is my Kodak Elite Chrome 200 Color Fade. I keep the ISO high on this recipe to make it look more grainy. While I’ve done that with several black-and-white recipes, this is the first time I’ve done it with color. This is also the only recipe that calls for the 1:1 aspect ratio, although feel free to use 3:2 or 16:9 if you’d like. These settings pair well with vintage lenses, and if you “miss” focus a little sometimes, well, that just makes it resemble Instamatic even more.

Classic Chrome
Dynamic Range: DR200
Highlight: -1
Shadow: +3
Color: -4
Noise Reduction: -4
Sharpening: -4
Grain Effect: Strong
Color Chrome Effect: Strong
Image Quality: Normal
Aspect Ratio: 1:1
White Balance: 6300K, +6 Red & +3 Blue
ISO: 3200 – 6400
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs using this “Kodacolor II 126” film simulation recipe on my Fujifilm X-T30:

Polaroid Girl – Farmington, UT – Fujifilm X-T30

Lizard, Boy & Wall – Farmington, UT – Fujifilm X-T30

Boy in the Alley – Farmington, UT – Fujifilm X-T30

Two Cans – Farmington, UT – Fujifilm X-T30

Suburban House & Tree – Farmington, UT – Fujifilm X-T30

Suburban Trees & Distant Mountain – Farmington, UT – Fujifilm X-T30

Tree Top & Mountain Top – Farmington, UT – Fujifilm X-T30

Suburban April – Farmington, UT – Fujifilm X-T30

Robot in the Window – Farmington, UT – Fujifilm X-T30

Heart & Soul – Farmington, UT – Fujifilm X-T30

Wreath & Flowers – Farmington, UT – Fujifilm X-T30

White Paper – Farmington, UT – Fujifilm X-T30

Bowl on a Trike – Farmington, UT – Fujifilm X-T30

Hose & Elephant – Farmington, UT – Fujifilm X-T30

Concrete Path – Farmington, UT – Fujifilm X-T30

Little Colorful Chair – Farmington, UT – Fujifilm X-T30

Summer Chair – Farmington, UT – Fujifilm X-T30

Day Dreaming – Farmington, UT – Fujifilm X-T30

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

[Not] My Fujifilm X-T30 Ilford Delta Push-Process Film Simulation Recipe

Posted on April 24, 2020 by Ritchie Roesch

Boy in a Chair with a Phone – Farmington, UT – Fujifilm X-T30 “Ilford Delta Push-Process”

When I shot film, Ilford Delta was my go-to for black-and-white photography. Sure, I used other films, but Ilford Delta was what I most often loaded into my camera. For fine-grain, I used Delta 100. For situations other than bright daylight, or if I wanted more contrast and grittiness, I would choose Delta 400. For dim light, I would on a rare occasion use Delta 3200. Sometimes I would push-process the Delta 100 and Delta 400 a stop or two. I actually still have a couple rolls of Delta film sitting around, although I haven’t shot much film in the last few years. The last roll of Ilford Delta that I shot was Delta 3200.

Something that people might not be aware of is that Delta 3200 is actually not an ISO 3200 film, it’s actually rated at ISO 1000, but has “built-in” push-processing to ISO 3200 (labs know to increase the development time unless you specify otherwise). Ilford Delta films have a lot of latitude and flexibility. There’s a lot that one can do in the lab with any of the Ilford Delta films to customize the contrast and grain.

Fuji X Weekly reader K. Adam Christensen shared with me his film simulation recipe for Ilford Delta 3200, and I really like the way that his recipe looks. It’s a great black-and-white recipe! I made a couple of small tweaks to it, nothing big. Adam uses this recipe on his X100V, and he sets Grain to Large, which is an option on that camera, as well as the X-Pro3 and X-T4, but not on my X-T30. If I could set Grain to Large I would, as that would better mimic Delta 3200. Without it, perhaps these settings more resemble Delta 3200 shot and developed at ISO 1600. It reminds me of Delta 400 pushed one stop or maybe a stop and a half.

White House Beyond the Thistle – Farmington, UT – Fujifilm X-T30 “Ilford Delta Push-Process”

I have the ISO on this recipe set at 12800, which makes it difficult (but not impossible) to use in daylight situations. It’s a little easier on X100 cameras that have a built-in neutral density filter. If you need to drop the ISO, you can go as low as ISO 3200 and still get good results, but for best results keep the ISO at 12800 as much as possible. All of the pictures in this article were shot at ISO 12800.

Monochrome (+Y, +R, +G)
Dynamic Range: DR400
Highlight: 0
Shadow: +3
Grain: Strong
Color Chrome Effect: Off
Toning: 0
Sharpening: -3
Noise Reduction: -4
Exposure Compensation: +1/3 to +2/3 (typically)
ISO 12800

Example photographs, all camera-made JPEGs using this Ilford Delta Push-Process film simulation recipe on my Fujifilm X-T30:

FED 5C & Industar 69 – Farmington, UT – Fujifilm X-T30

Phone Numbers – Farmington, UT – Fujifilm X-T30

Girl, Smile – Farmington, UT – Fujifilm X-T30

Broccoli – Farmington, UT – Fujifilm X-T30

Faux Leaves – Farmington, UT – Fujifilm X-T30

Glass Bottles with Stems – Farmington, UT – Fujifilm X-T30

Flowers Waiting to Pot – Farmington, UT – Fujifilm X-T30

Potted Tulip – Farmington, UT – Fujifilm X-T30

White Tulips at Night – Farmington, UT – Fujifilm X-T30

Outdoor Shelf – Farmington, UT – Fujifilm X-T30

Dirty Feet – Farmington, UT – Fujifilm X-T30

Roller Skating – Farmington, UT – Fujifilm X-T30

Skates – Farmington, UT – Fujifilm X-T30

Girl Outdoor – Farmington, UT – Fujifilm X-T30

Two Feet – Farmington, UT – Fujifilm X-T30

Chair Shadow – Farmington, UT – Fujifilm X-T30

Blackberry Vine on Concrete – Farmington, UT – Fujifilm X-T30

Watering Plant – Farmington, UT – Fujifilm X-T30

Wet Handlebar – Farmington, UT – Fujifilm X-T30

Raindrops on a Window – Farmington, UT – Fujifilm X-T30

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

My Fujifilm X-T30 Kodak Gold 200 Film Simulation Recipe

Posted on April 16, 2020 by Ritchie Roesch

Crown Burger – Layton, UT – Fujifilm X-T30 “Kodak Gold 200”

I’ve been asked countless times to create a Kodak Gold film simulation recipe. I’ve tried several times to make one, but I couldn’t get it quite right. Last week I was scrolling through Instagram and I saw a picture that I thought at first glance was captured using my Portra 160 recipe. It’s not unusual to see pictures that were captured using my different recipes, as some of them have become quite popular. It was an interesting picture, so I took my time looking at it, and as I did I thought that there was just too much saturation, contrast and grain for it to be my Portra recipe, yet it was still very similar. When I read the description I realized that the picture was captured with actual Kodak Gold 200 film! At that moment I knew that I could create a Gold recipe simply by modifying the Portra recipe.

Kodak Gold, which was introduced in the late-1980’s and is still around today, is a general purpose color negative film. It was originally called Kodacolor VR-G, then Kodacolor Gold, and finally Gold. It replaced Kodacolor VR. While the film has been improved a few times over the years, it still looks pretty much the same today as it did in the 1980’s. The film is prone to color shifts, and results can vary significantly depending on how the picture was shot, developed and printed or scanned.

Flowing Farmington Creek – Farmington, UT – Fujifilm X-T30 “Kodak Gold 200”

Even though this Kodak Gold film simulation recipe is very similar to my Portra recipe, it took many experiments to get it right. I tried different combinations of Highlight, Shadow and Color before settling on these settings. I adjusted the white balance shift several times before returning to the same shift as Portra 160. I feel that this recipe is a good facsimile to actual Gold film, although, like all recipes, it will never be exact, as it cannot account for all the variables. It’s pretty close, though, in my opinion. I want to give a special thank-you to Fuji X Weekly reader Piotr Skrzypek for creating the original Portra 160 recipe for X-Trans II, which allowed me to make one for X-Trans III & IV cameras, which in turn made this Kodak Gold 200 recipe possible. This recipe is compatible with X-Trans III & IV cameras.

Classic Chrome
Dynamic Range: DR-Auto
Highlight: -2
Shadow: +1
Color: +3
Noise Reduction: -4
Sharpening: -2
Grain Effect: Strong
Color Chrome Effect: Off
White Balance: Daylight, +4 Red & -5 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: +2/3 to +1 1/3 (typically)

Example photographs, all camera-made JPEGs using this Kodak Gold 200 film simulation recipe on my Fujifilm X-T30:

Space Communication – Farmington, UT – Fujifilm X-T30

Sky Traffic – Farmington, UT – Fujifilm X-T30

Little Grass Runner – Farmington, UT – Fujifilm X-T30

Pear Tree Top – Farmington, UT – Fujifilm X-T30

Spring Tree – Farmington, UT – Fujifilm X-T30

Tree Blossom – Farmington, UT – Fujifilm X-T30

Backlit Pear Blossoms – Farmington, UT – Fujifilm X-T30

Pear Blossom Day – Farmington, UT – Fujifilm X-T30

Boy in Spring – Farmington, UT – Fujifilm X-T30

Branch & Sky – Farmington, UT – Fujifilm X-T30

Pear Blossom Reflection – Farmington, UT – Fujifilm X-T30

Phragmites – Farmington, UT – Fujifilm X-T30

Easy Feelin’ – Farmington, UT – Fujifilm X-T30

Girl in the Backyard – Farmington, UT – Fujifilm X-T30

Stages of Tulip Blooms – Farmington, UT – Fujifilm X-T30

Crescent Tulips – Farmington, UT – Fujifilm X-T30

Floral Decor – Farmington, UT – Fujifilm X-T30

Cheese – Farmington, UT – Fujifilm X-T30

Grill & Chill – Centerville, UT – Fujifilm X-T30

No Door Dash in the Drive Thru – Centerville, UT – Fujifilm X-T30

Corner – Centerville, UT – Fujifilm X-T30

KFC – Layton, UT – Fujifilm X-T30

Everette Brown – Layton, UT – Fujifilm X-T30

Outside 7-Eleven – Layton, UT – Fujifilm X-T30

Sunlight Through The Trees – Farmington, UT – Fujifilm X-T30

Tree Trunk Above the Pond – Farmington, UT – Fujifilm X-T30

Boulder Above the Pond – Farmington, UT – Fujifilm X-T30

Father & Son Fishing in Farmington Pond – Farmington, UT – Fujifilm X-T30

Fishing in Farmington Pond – Farmington, UT – Fujifilm X-T30

Staircase Down to the Water – Farmington, UT – Fujifilm X-T30

Flowing Creek – Farmington, UT – Fujifilm X-T30

Creek in the Woods – Farmington, UT – Fujifilm X-T30

Rocky Farmington Creek – Farmington, UT – Fujifilm X-T30

Winter is Nearly Over – Farmington, UT – Fujifilm X-T30

Red Car in Green Grass – Farmington, UT – Fujifilm X-T30

Bug in the Dirt – Farmington, UT – Fujifilm X-T30

Sunset on Burger Customer Parking – Layton, UT – Fujifilm X-T30

My Fujifilm X-T30 Polaroid II Film Simulation Recipe

Posted on April 12, 2020 by Ritchie Roesch

Pear Blossom – Farmington, UT – Fujifilm X-T30 “Polaroid II”

I was recently viewing vintage Polaroid pictures online while conducting research for my “original” Polaroid film simulation recipe, and I stumbled across one picture in particular that caught my attention. It was dark, contrasty, with low saturation and a blue-purple color cast. I really liked the way that this picture looked. After digging a little deeper I discovered that this wasn’t a real Polaroid, but a digital image given a Polaroid aesthetic using a VSCO preset (I’m not sure which one). I set out to recreate that look in-camera, and that’s how this “Polaroid II” recipe came to be.

This isn’t a recipe that I would use all of the time, but it’s interesting sometimes. It’s actually somewhat similar to my Expired Eterna recipe. It’s not terribly far off from my Bleach Bypass recipe, either. If you like those two, you might also appreciate this one. In the right situations, this recipe will give you a vintage analogue look with just the right range of expression. This recipe is compatible with all X-Trans IV cameras.

Eterna
Dynamic Range: DR100
Highlight: +4
Shadow: +4
Color: -3
Noise Reduction: -4
Sharpness: -4
Grain Effect: Strong
Color Chrome Effect: Strong
White Balance: Shade, +4 Red & +6 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: 0 to -1 (typically)

Example photographs, all camera-made JPEGs using this “Polaroid II” recipe on my Fujifilm X-T30:

Buildings in Park City – Park City, UT – Fujifilm X-T30

Directv – Farmington, UT – Fujifilm X-T30

Roofs in a Row – Farmington, UT – Fujifilm X-T30

Slope – Farmington, UT – Fujifilm X-T30

Pine Tree & Cloud – Park City, UT – Fujifilm X-T30

White Tree – Farmington, UT – Fujifilm X-T30

Pear Bloom – Farmington, UT – Fujifilm X-T30

Veiled Peak – Farmington, UT – Fujifilm X-T30

You – Farmington, UT – Fujifilm X-T30

You II – Farmington, UT – Fujifilm X-T30

Kitchen Succulent – Farmington, UT – Fujifilm X-T30

Map & Leaves – Farmington, UT – Fujifilm X-T30

Young Barista – Farmington, UT – Fujifilm X-T30

The Joy of Writing – Farmington, UT – Fujifilm X-T30

Girl with Blue Bow – Farmington, UT – Fujifilm X-T30

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

My Fujifilm X-T30 Polaroid Film Simulation Recipe

Posted on April 11, 2020 by Ritchie Roesch

Red Benches & Post Office – Park City, UT – Fujifilm X-T30 “Polaroid”

I get asked frequently to create film simulation recipes for all sorts of different looks. Sometimes I’m successful, oftentimes I’m not. I received one such request recently that was a little unusual: the stills from the television series True Detective. The set photographer for this show is Michele K. Short. The show itself was shot using Kodak Vision3 50D and 500T film. Michele likely photographed the stills with her Leica M10-P, and edited them to look like analog pictures. Honestly, I have no idea what specific film they’re supposed to resemble, but I was able to pretty quickly create something that is in the ballpark of those stills.

I looked and looked at different films to figure out what this aesthetic might be close to. I didn’t find anything that I was satisfied with. There were a couple of films that I thought, “Well, you can make an argument, but it’s a stretch.” I decided that it most reminds me of Polaroid peal-apart film, perhaps 669. It’s not intended to resemble Polaroid, and perhaps it doesn’t do so very well, but I needed a name, and I wasn’t going to call this recipe “True Detective” so I went with “Polaroid” instead. Whether this does or doesn’t resemble Polaroid, I think you’ll find it produces interesting results. Some of you are going to really appreciate this film simulation recipe!

Abstract Architecture – Park City, UT – Fujifilm X-T30 “Polaroid”

You can get good results with this recipe when you over, under or correctly expose, but some of my favorite pictures were overexposed. There’s a lot of latitude with this recipe. It’s fun to play around with. It seems especially well suited for high contrast scenes, although it can still be used in mid and low contrast scenes. It’s compatible with all X-Trans IV cameras and the Fujifilm X-H1.

Eterna
Dynamic Range: DR400
Highlight: +4
Shadow: -2
Color: -2
Noise Reduction: -4
Sharpness: -1
Grain Effect: Strong
Color Chrome Effect: Off
White Balance: Auto, +5 Red & -5 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: -2/3 to +1 (typically)

Example photographs, all camera-made JPEGs using this “Polaroid” recipe on my Fujifilm X-T30:

Red, White & View – Farmington, UT – Fujifilm X-T30

Storm Behind Rural Neighborhood – Farmington, UT – Fujifilm X-T30

Thistle Evening – Farmington, UT – Fujifilm X-T30

Girl Unsure on Path – Farmington, UT – Fujifilm X-T30

Dormant Branches & Half Moon – Farmington, UT – Fujifilm X-T30

Reeds & Mountain – Farmington, UT – Fujifilm X-T30

Evening Light at Francis Peak – Farmington, UT – Fujifilm X-T30

House Roof – Farmington, UT – Fujifilm X-T30

House – Farmington, UT – Fujifilm X-T30

Garage Rooftops – Farmington, UT – Fujifilm X-T30

Bicycle Boy – Farmington, UT – Fujifilm X-T30

Hooded Boy – Farmington, UT – Fujifilm X-T30

Joyful Girl – Farmington, UT – Fujifilm X-T30

Smile – Farmington, UT – Fujifilm X-T30

Girl with Curls – Farmington, UT – Fujifilm X-T30

Happily Running – Farmington, UT – Fujifilm X-T30

Paw Patrol – Farmington, UT – Fujifilm X-T30

Shoe on a Red Tricycle – Farmington, UT – Fujifilm X-T30

Wilting Flower – Farmington, UT – Fujifilm X-T30

Lots of Luck – Farmington, UT – Fujifilm X-T30

Lamp – Farmington, UT – Fujifilm X-T30

Leafy Indoor Decor – Farmington, UT – Fujifilm X-T30

Lamp in Daylight – Farmington, UT – Fujifilm X-T30

Empty Ski Lift – Park City, UT – Fujifilm X-T30

Trees & Lift – Park City, UT – Fujifilm X-T30

Pine Tree & Clouds – Farmington, UT – Fujifilm X-T30

Snow At The Fuel Stop – Farmington, UT – Fujifilm X-T30

Unused Snow Bridge – Park City, UT – Fujifilm X-T30

Park City’s Empty Street – Park City, UT – Fujifilm X-T30

Downtown Park City, April 2020 – Park City, UT – Fujifilm X-T30

Park City Buildings – Park City, UT – Fujifilm X-T30

Flag U – Park City, UT – Fujifilm X-T30

Center Street Lamp – Salt Lake City, UT – Fujifilm X-T30

See also: Film Simulation Recipes

Help Fuji X Weekly

$5.00

My Fujifilm X-T30 Kodak Portra 160 Film Simulation Recipe

Posted on April 3, 2020 by Ritchie Roesch

Summer Waves Hello – Farmington, UT – Fujifilm X-T30 “Kodak Portra 160”

This is the film simulation recipe that you’ve been waiting for! One of the top films that I’ve been asked to create a film simulation recipe for is Portra 160. I’ve tried many times, and I felt that I got close a couple of times, but I was never able to get it quite right. Fuji X Weekly reader Piotr Skrzypek recently created a Portra 160 film simulation recipe for his Fujifilm X-E2, which he gave me permission to share. I modified his settings very slightly, and published that Portra 160 recipe for X-Trans II cameras last week. Using those settings as a starting point, and understanding how X-Trans II is different than the newer sensors, I was able to make a Portra 160 film simulation recipe that is compatible with X-Trans III & IV cameras.

Portra is a line of films that Kodak introduced in 1998. As the name implies, it was designed for portrait photography, although it has been used for many different genres, as it’s good for more than just portraits. Kodak made Portra in three different ISOs: 160, 400 and 800. The ISO 160 and 400 versions originally had two options: Neutral Color (NC) and Vivid Color (VC). In 2011 Kodak redesigned Portra, and they did away with the Neutral and Vivid versions, making instead only one option in each ISO. Portra has been a popular film since its introduction.

Horizontal Ladder – Farmington, UT – Fujifilm X-T30 “Kodak Portra 160”

This recipe looks great when you turn the exposure compensation dial up. You don’t want to clip highlights, but if you keep the highlights just below clipping you can get excellent results. This recipe is especially good for high-contrast scenes. Really, this is a good all-around recipe that you’ll want to keep programmed in your camera’s Q Menu. I imagine that for some of you, this will be the top film simulation recipe that you use most of the time. Don’t be afraid to use Auto-White-Balance instead of Daylight, or to adjust Color up to +2 or down to 0, depending on your tastes.

Classic Chrome
Dynamic Range: DR-Auto
Highlight: -2
Shadow: -2
Color: +1
Noise Reduction: -4
Sharpening: -2
Grain Effect: Weak
Color Chrome Effect: Off
White Balance: Daylight, +4 Red & -5 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: +2/3 to +1 1/3 (typically)

Example photographs, all camera-made JPEGs using this Kodak Portra 160 film simulation recipe on my Fujifilm X-T30: