Fujifilm just discounted the X-T3 WW, which is an X-T3 without a battery charger (USB charging only). The X-T3 used to be Fujifilm’s flagship model until the X-T4 was released two years ago, but they still offer it brand-new because it is a best-selling model, even outselling the superior X-T4. The X-T3 WW is one of the absolute best bargains available today, but now (through June 5th, apparently) the X-T3 WW is an even better bargain! If you’ve thought about buying one, it’s a really good time to do so.
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
The Fujifilm X-T3 WW body-only is $100 off, now only $999.95! AmazonB&H The Fujifilm X-T3 WW + 18-55mm kit is $200 off, now only $1,299.95! AmazonB&H
A few months back I published an article, Best Fujifilm Cameras Under $1,000, and the X-T3 WW was listed as “Best Value Just Above $1,000,” but now that it’s on sale it would be my best value recommendation for $1,000 or less. The X-T3 also made it to number three on my 10 Most Important Fujifilm X-Trans Cameraslist.
Inside City Creek – Salt Lake City, UT – Fujifilm X-T30 – “Kodacolor VR”
This Film Simulation Recipe was an experiment. I started out with my Fujicolor 100 Industrial recipe, but instead of using a cool White Balance with a warm White Balance Shift, I did the opposite: I used a warm White Balance with a cool shift. After many adjustments to various settings, this ended up not resembling the Fujicolor 100 Industrial recipe much at all, but it does have a great vintage print-film aesthetic that I really like.
I wasn’t sure at first which film this recipe most closely resembled (since it wasn’t intended to mimic any specific film), although it seemed to have some similarities to Kodacolor VR. I already have a Kodacolor recipe (plus a variant of it), which does a great job at mimicking Kodacolor VR; this recipe and that one look somewhat similar, but definitely different. Then I ran across some pictures that looked very similar to the ones you see in this article, and it turned out that they were shot on Kodacolor VR film that had expired. So I think this recipe, while it does resemble Kodacolor VR, as well as ColorPlus 200 (which is a direct descendant of that film), it most closely looks like Kodacolor VR that’s been stored a little past its expiration date. Of course, one film can have many different looks, depending on how it was shot, developed, scanned and/or printed, and (in this case) stored, so this recipe serves as a nice alternative to my original Kodacolor recipe.
Leaning Tower – Salt Lake City, UT – Fujifilm X-T30 – “Kodacolor VR”
This “Kodacolor VR” recipe was originally a Patron Early-Access Recipe, but is now available to everyone! If you are a Fuji X Weekly App Patron, there is a new Early-Access Recipe that replaced this one, so be sure to look for that. This recipe is compatible with Fujifilm X-Trans III and X-T3 and X-T30 cameras. For those with newer X-Trans IV cameras, set Color Chrome FX Blue to Off, Clarity to 0 (or perhaps -2), and I’d suggest Grain size Large, but use Small if you prefer.
Classic Chrome Dynamic Range: DR400 Highlight: -1 Shadow: +1 Color: +2 Sharpness: -1 Noise Reduction: -4 Grain: Weak Color Chrome Effect: Off White Balance: 10000K, -7 Red & +8 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured using this “Kodacolor VR” film simulation recipe on my Fujifilm X-T30:
Summer Reeds – Farmington, UT – Fujifilm X-T30
Corner Through Leaves – Salt Lake City, UT – Fujifilm X-T30
Stones & Glass Ceiling – Salt Lake City, UT – Fujifilm X-T30
Glass – Salt Lake City, UT – Fujifilm X-T30
Building a Building – Salt Lake City, UT – Fujifilm X-T30
Small Spaces Between – Salt Lake City, UT – Fujifilm X-T30
Twilight Telephone Poles – Salt Lake City, UT – Fujifilm X-T30
Stoneground – Salt Lake City, UT – Fujifilm X-T30
Goes for Gold – Salt Lake City, UT – Fujifilm X-T30
Night Parking – Salt Lake City, UT – Fujifilm X-T30
Doki Doki – Salt Lake City, UT – Fujifilm X-T30
Escalators – Salt Lake City, UT – Fujifilm X-T30
Downtown Buildings – Salt Lake City, UT – Fujifilm X-T30
Coming Train – Salt Lake City, UT – Fujifilm X-T30
Trax – Salt Lake City, UT – Fujifilm X-T30
Waiting on the Platform – Salt Lake City, UT – Fujifilm X-T30
Glass & Sky – Salt Lake City, UT – Fujifilm X-T30
Tall Downtown Buildings – Salt Lake City, UT – Fujifilm X-T30
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Of the different faux filter options for Acros, +Y is the one I use the least. I think it goes back to my film days when I used color filters with B&W film. I would select Orange or Red before Yellow, because Yellow is fairly subtle, but the advantage of the Yellow filter is that it doesn’t block as much light. Of course, the faux filters on Fujifilm cameras don’t affect the exposure like real filters with film. Anyway, recognizing that I infrequently use Acros+Y, I set out to make a Film Simulation Recipe that uses +Y and produces an aesthetic that I like. I think it is important to challenge myself sometimes, so if there’s some setting or gear or option that I don’t use often, forcing myself to use it helps me to grow as a photographer. That’s why I made this recipe.
I wanted something with an overall darker curve, so that it would produce a moody look. Maybe deep blacks reminiscent of Tri-X, and maybe a push-process feel. I didn’t have any specific film in mind, but I’m reminded of this time that I push-processed a roll of Ilford Delta 400, but inadvertently got it wrong—I underexposed two stops, and only had the lab push it by one stop, so the pictures were largely underexposed, and they were darker and moodier (yet less contrasty and grainy) than I had intended. This isn’t exactly the same as that, but not too dissimilar, either, so that’s why I call this recipe Moody Monochrome.
Early Blossoms – Farmington, UT – Fujifilm X100V – “Moody Monochrome”
Because this film simulation recipe uses Clarity, it is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. If you have an X-T3 or X-T30 or X-Trans III camera, ignore Clarity and Grain size, and use a diffusion filter, like a 10% CineBloom or 1/4 Black Pro Mist, to get similar results.
Acros+Y Dynamic Range: DR400 Highlight: -1 Shadow: +4 Noise Reduction: -4 Sharpness: -2 Clarity: -3 Grain Effect: Strong, Large Color Chrome Effect: Off Color Chrome Effect Blue: Off White Balance: Fluorescent 3, -4 Red & -9 Blue ISO: 3200 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this “Moody Monochrome” Film Simulation Recipe on my Fujifilm X100V:
Stop West – Farmington, UT – Fujifilm X100V
Watch For Falling Bikes – Farmington, UT – Fujifilm X100V
Sun Beams – Layton, UT – Fujifilm X100V
Tower in the Middle of Nowhere – Layton, UT – Fujifilm X100V
Path Through The Grass – Layton, UT – Fujifilm X100V
Wetland Boardwalk – Layton, UT – Fujifilm X100V
Wetland Grass – Layton, UT – Fujifilm X100V
Creek in the Trees – Farmington, UT – Fujifilm X100V
Creek, Stick & Vines – Farmington, UT – Fujifilm X100V
Log Above The Water – Farmington, UT – Fujifilm X100V
Grey Brush – Farmington, UT – Fujifilm X100V
Cat on a Log – Farmington, UT – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
I just released the first “major” RitchieCam app update. For those who don’t know, I created an iOS camera app to simplify and streamline your iPhone photography. The app is free, and is intended to be a useful free tool, yet becoming a RitchieCam Patron unlocks all of the filters and the best app experience.
There are a lot of features that I want to incorporate into the app, but it takes time and work to implement them all, so they will roll out over time. In other words, RitchieCam is just going to get better and better! I just released the first significant update—if you have RitchieCam on your phone and it didn’t automatically update, be sure to manually do it in the App Store now.
One new feature is the volume button—either up or down—as a shutter release. Depending on how you hold your phone, this is a more convenient way to take pictures. Instead of tapping the circle shutter at the bottom, you can press either volume up or volume down to accomplish the same thing. The ability to use the volume buttons to capture photographs was highly requested, so I’m pleased to be able to include it in this update.
Another new feature is additional aspect ratios. Originally, all RitchieCam photos were in iPhone’s standard 4:3 aspect ratio, which is necessary if you want to use the full resolution of the sensor. But if you prefer a different shape, there are now five aspect ratios to choose from: 4:3, 3:2, 5:4, 1:1, & 16:9.
Here are some photos, all captured using the Standard Film filter on RitchieCam, illustrating the different aspect ratios:
4:3 / 3:4
3:2 / 2:3
5:4 / 4:5
1:1
16:9 / 9:16
RitchieCam saves the pictures in Apple’s High Efficiency Image Container (HEIC, also called HEIF) format, which maximizes image quality while simultaneously taking less space on your phone. It’s also necessary for implementing some new features down the road. The downside to HEIC is that it is less universally compatible with non-Apple programs. For those who prefer JPEG over HEIC, you now have that option—tap the Gear icon, and you’ll find the Format toggle about halfway down.
The other improvements are less obvious. RitchieCam will now remember the last Flash and EV settings used (as well as the aspect ratio), which will hopefully improve the user experience for some of you. There are several behind-the-scenes optimizations to improve speed, stability, and quality, which you’re not likely to notice, but micro improvements add up over time, so they’re important to continuously work on.
And that’s the update! Already work has begun on the next one. If the feature you were hoping for isn’t in this one, with any luck you won’t have to wait too long for it, but I do ask for your patience, because these things do take awhile. In the meantime, I hope there’s something in this update that you find helpful to you.
As you probably know, I have published over 200 Film Simulation Recipes for Fujifilm cameras—it’s fast approaching 250! There are so many looks that you can achieve straight-out-of-camera no matter your Fujifilm model. But I’m not the only one who has created recipes, and maybe you’re after some look that I haven’t yet published, so I thought I’d compile a list of websites where you can find more recipes. Using Google, I was shocked by what I found: so many people have published recipes! I’m sure my list below is not exhaustive—if you know of something I’ve missed, feel free to leave it in the comments. It’s really quite amazing what’s out there!
If you have the Fuji X Weekly App on your phone and are an App Patron, you can use the Blank Recipe Cards feature to add any recipe that you find to the App so that you can always have it with you. Or if you’ve created your own recipe, you can add it into the App. Or if there’s a recipe that you’ve modified in some way and want to keep track of that modification, you can use it for that purpose, too.
Anyway, below are various websites that I found that have Film Simulation Recipes for Fujifilm cameras. Take a look!
Anders sent me a lengthy note on his process to create this recipe, and I want to share with you a short snippet just so you get an idea of the effort put into this. “I checked the spectrum sensitivity chart and looked for any significant bumps in the wavelengths,” he wrote. “For the largest bump, I checked what color it represents to try to match it as close as possible with the white balance shift. This recreated the bump in the recipe to make the simulation a bit extra sensitive to that specific color.” This was point four of seven in his process, and shows the kind of effort that can go into creating Film Simulation Recipes.
Specifically about this recipe, Anders noted, “Middle gray is the game here. Soft highlights and things disappearing into deep dark shadows, but never as black as Tri-X. Great for all day shooting in just about any weather. Looks totally awesome on winter shots!” I can add that it looks great on both sunny days and rainy days, too. I think it does especially well in moderate and high contrast situations.
Footbridge & Falls – Multnomah Falls, OR – Fujifilm X100V – “Ilford HP5 Plus 400”
Ilford began the Hypersensitive Panchromatic (HP) series in 1931. HP5 Plus 400 is the latest version, released in 1989, and still available today. This is a classic black-and-white film stock that has stood the test of time, and Anders did a great job mimicking it on Fujifilm cameras. This recipe is intended for use on the X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras; however, for the X-T3 and X-T30, as well as X-Trans III cameras, simply ignore Grain size, and this recipe is compatible with those cameras, so anyone with an X-Trans III or IV camera can use this.
A side note: this recipe is different than my old Ilford HP5 Plus and Ilford HP5 Push Process recipes, which I still quite like, and are both excellent in low and mid contrast situations. Try those or Anders’ version—or all three if you are feeling adventurous!
Monochrome Dynamic Range: DR400 Highlight: -1 Shadow: +1 Noise Reduction: -4 Sharpness: -2 Clarity: 0 Grain Effect: Strong, Large Color Chrome Effect: Off Color Chrome Effect Blue: Off White Balance: Daylight, +1 Red & -8 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: -2/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Ilford HP5 Plus 400” Film Simulation Recipe on my Fujifilm X100V:
Horsetail Falls From Bridge – Columbia River Gorge, OR – Fujifilm X100V
Horsetail Falls – Columbia River Gorge, OR – Fujifilm X100V
Upper Falls – Multnomah Falls, OR – Fujifilm X100V
36 CFR 261.53(e) – Multnomah Falls, OR – Fujifilm X100V
Use Caution For Slipping Bandits – Multnomah Falls, OR – Fujifilm X100V
No Cars – Astoria, OR – Fujifilm X100V
Two Elk in a Yard – Warrenton, OR – Fujifilm X100V
Spiral Stairs – Fort Stevens SP, OR – Fujifilm X100V
Old Fireplace – Fort Stevens SP, OR – Fujifilm X100V
Stairs in the Forest – Fort Stevens SP, OR – Fujifilm X100V
Astoria & Columbia River – Astoria, OR – Fujifilm X100V
Two Ships in the Columbia River – Astoria, OR – Fujifilm X100V
Tetons, As Seen By Oneskies – Grand Teton NP, WY – Fujifilm X100V
South Jetty – Fort Stevens SP, OR – Fujifilm X100V
Pointing To The Pacific – Cannon Beach, OR – Fujifilm X100V
Haystack Sticks – Cannon Beach, OR – Fujifilm X100V
Season 2 of SOOC kicks off this Thursday, March 24th, at 10 AM Pacific Time, 1 PM Eastern. That’s tomorrow!
SOOC is a monthly live video series, with each episode focused on a different film simulation recipe. It is a collaboration between Tame Your Fujifilm (Fujifilm X-Photographer Nathalie Boucry) and Fuji X Weekly (Ritchie Roesch). SOOC is a fun and educational experience where we not only talk about Fujifilm camera settings, but also answer your questions and give tips and tricks. Basically, we’re trying to help you master your Fujifilm camera, with a focus on simplifying your photographic workflow. It’s an interactive show, and your participation is essential, so I really hope to see you there!
This episode will conclude our discussion of the Kodak Gold 200 Film Simulation Recipe, and introduce the next recipe-of-the-month: Kodak Tri-X 400. It will be a great time, with wonderful photographs and discussions. You won’t want to miss it!
Also, there will be a 30-minute pre-show that I invite you to join. So if you have a little time before the show, even if it’s only five or ten minutes, please tune in as we showcase some of your pictures and have an informal chat with the audience.
Multnomah Falls is an iconic scenic stop along the historic Columbia River Highway in Oregon. Found within the Columbia River Gorge, it is the tallest year-round waterfall in Oregon, and the most visited natural site in the Pacific Northwest of the United States. The famous footbridge was constructed in 1915, while the gift-shop at the bottom—originally a lodge—was built in 1925, and both are on the National Register of Historic Places. It is an incredible location to experience, with beauty that rivals what one might find within National Parks.
I recently visited Multnomah Falls, and used my Fujifilm X100V and iPhone 11 to photograph this amazing spot. Unsurprisingly, I had several of my Film Simulation Recipes programmed into my X100V, and I used my RitchieCam camera app on my iPhone. Because there is a lot of mist from the falls, and it was a rainy day (as is common there), having weather-sealed cameras was important—both the X100V (as long as a filter is on the front) and the iPhone can handle getting wet, and both did get wet. Really wet.
While it might seem unnecessary to carry both an X100V and an iPhone, that turned out not to be the case for two reasons: focal-length, and ease of sharing. The X100V has a very useful 34.5mm (equivalent) focal-length lens, while the iPhone 11 has a 26mm (equivalent) camera and 13mm (equivalent) camera (if I had the “Pro” version, it would also include a 52mm camera, but alas I don’t have that model). The X100V was wide-angle enough to capture some good photographs of the falls, but the wider-angle lenses on the iPhone 11 were often better options, and I used it more than the Fujifilm camera at this location. To the second point, I was able to text pictures of the falls to some family and friends immediately—before even getting back to the car—and share with you via social media pictures of the falls within minutes. The X100V pictures were pretty quick and easy to share, too—thanks to the wonderful JPEG output of the camera—but not quite as immediate as the iPhone images.
iPhone 11 – RitchieCam app – MetroColor filter
What’s better, X100V or iPhone? For pure image quality, the Fujifilm camera is hands down better, but that only really matters if you are viewing the pictures large. Looking at them on this website or on social media, the quality difference is hard to spot, and even if you can see it, the quality difference is pretty insignificant. If you were viewing 11″ x 14″ prints of the pictures, the quality difference would still be fairly small, although if you compared them side-by-side you could tell without much trouble that the X100V is superior. But if you are viewing 16″ x 20″ prints or larger, the iPhone images just don’t hold up nearly as well as the Fujifilm. So the X100V is definitely the better tool if you might print the pictures large, but the iPhone is a capable tool if you don’t think you’ll be printing large—let’s face it, most pictures don’t get printed large, or even printed at all.
There’s no reason why both the X100V and the iPhone (or other cellphone camera) can’t both live together in peace and harmony. They’re different photographic tools that have different advantages and disadvantages, and they can both serve purposes within your photography. Film Simulation Recipes make the Fujifilm workflow more streamlined and the process more enjoyable. RitchieCam does the same thing for your iPhone photography. One tool might be better in a certain circumstance, and the other might be better in another circumstance, and perhaps both might be useful in a circumstance like Multnomah Falls.
Do you like the Fujifilm X100V pictures better, the iPhone pictures better, some of each, or none at all? Which Film Simulation Recipe that I used do you prefer? Which RitchieCam filter did the best? Let me know what you think in the comments!
I was asked to recreate the aesthetic from a frame of a classic movie. I don’t know which movie, but only that it was shot on “Eastmancolor” film, which is a brandname for many different motion picture films and processes going back to the 1950’s. In fact, Eastmancolor Negative, better known as ECN, is still the development process used for today’s motion picture film. It’s unknown which film was used for the frame I was shown, but I did my best to recreate it on a Fujifilm X-Pro3.
After using these settings for several days, I decided that it really reminds me of old Ektachrome color reversal film, perhaps from the 1970’s. Ektachrome was known for fading rather quickly, with some color shifts if not stored well. Aside from some faded slides from my grandparents, most of the Ektachrome I’ve seen from this era have been in classic photography magazines. I don’t know how faithfully this recipe mimics old Ektachrome film, but it definitely has the right “memory color” for me. I hope that you like it, too.
Abandoned Ferris Wheel – Salt Lake City, UT – Fujifilm X-Pro3 – “Old Ektachrome”
This “Old Ektachrome” film simulation recipe is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. This recipe isn’t compatible with the X-T3 or X-T30, but if you disregard Color Chrome FX Blue, disregard Grain size, and use a diffusion filter in lieu of Clarity, you’ll get similar results.
Classic Chrome Dynamic Range: DR400 Highlight: +2 Shadow: +1 Color: +3 Noise Reduction: -4 Sharpness: 0 Clarity: -4 Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Daylight, +3 Red & +2 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Old Ektachrome” film simulation recipe on a Fujifilm X-Pro3:
Blue Roof – Salt Lake City, UT – Fujifilm X-Pro3
Old Carnaval Ride – Salt Lake City, UT – Fujifilm X-Pro3
Too Late To Ride – Salt Lake City, UT – Fujifilm X-Pro3
Early Blossoms – Salt Lake City, UT – Fujifilm X-Pro3
Potted Plant – Salt Lake City, UT – Fujifilm X-Pro3
Desert Snow – Canyonlands NP, UT – Fujifilm X-Pro3
Rock & Half Arch – Arches NP, UT – Fujifilm X-Pro3
Cave & Juniper – Arches NP, UT – Fujifilm X-Pro3
Snow in the Desert – Arches NP, UT – Fujifilm X-Pro3
Sign Stickers – Canyonlands NP, UT – Fujifilm X-Pro3
Red Rock Tree – Canyonlands NP, UT – Fujifilm X-Pro3
View Through Mesa Arch – Canyonlands NP, UT – Fujifilm X-Pro3
Fading Light On Wasatch – Farmington, UT – Fujifilm X-H1 – “Improved Velvia”
This Film Simulation Recipe is the second in a series, in which I attempt to customize each film simulation to optimize the aesthetic that Fujifilm intended. In other words, make a nice-looking recipe that is similar to yet better than the stock look of a film simulation. The first recipe in this series was Standard Provia, and this new one is called Improved Velvia.
I used to be frustrated by the Velvia film simulation because it’s not like Velvia 50. When people talk about Velvia film, that’s the emulsion that they most commonly mean, with it’s exaggerated super-vivid colors, but Velvia 50 is not the only Velvia film. You see, Velvia 50 was a “mistake” emulsion that landscape photographers fell in love with. I shot plenty of Velvia 50 back in the day, and it was one of my absolute favorite films. But Fujifilm was frustrated by it because it wasn’t what they wanted it to be. In 2003 Fujifilm “improved” Velvia and finally “fixed” their mistake—they made Velvia look like how they thought it should have from the beginning. This emulsion was called Velvia 100F and was duller than Velvia 50 (or Velvia 100, which came out in 2005)—it lacked the classic Velvia pop, but was better for pictures of people. One of the guys who worked on Velvia 100F also worked on the Velvia film simulation. It’s no surprise, then, that the Velvia film simulation is closer to Velvia 100F film than Velvia 50. Understanding this made me better realize the intention of—and better appreciate—the film simulation. I no longer find Velvia to be frustrating, and I think even default Velvia looks pretty good.
For this recipe, I didn’t want mimic Velvia 50, so I didn’t want to mess with the settings very much. I have other Velvia recipes that I quite like (here, here, & here), and those could very easily “stand-in” for this. I felt like a subtly-different option is what was needed. This recipe is compatible with X-Trans III models, plus the X-T3 and X-T30. For newer X-Trans IV, consider setting Color Chrome Effect and Color Chrome FX Blue to Off, Grain to Weak Small, and Clarity to 0.
Velvia Dynamic Range: DR200 Highlight: -1 Shadow: 0 Color: +1 Sharpness: 0 Noise Reduction: -4 Grain: Weak White Balance: Auto, -1 Red & -2 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs captured using this “Improved Velvia” film simulation recipe on my Fujifilm X-H1:
Reflection in Lake – Farmington, UT – Fujifilm X-H1
Wall & Reeds – Farmington, UT – Fujifilm X-H1
Net Fish – Farmington, UT – Fujifilm X-H1
Not Wanting A Picture – Farmington, UT – Fujifilm X-H1
Pelican – Farmington, UT – Fujifilm X-H1
Yellow Sky Sunset – Farmington, UT – Fujifilm X-H1
Soft Sunset Light on Francis Peak – Farmington, UT – Fujifilm X-H1
Sunset Sky & Water – Farmington, UT – Fujifilm X-H1
Reed Sunset – Farmington, UT – Fujifilm X-H1
Marsh Sunset – Farmington, UT – Fujifilm X-H1
Comparison:
“Improved Velvia”
“Default Velvia”
The top image (above) is this recipe, while the bottom image (above) is Velvia with everything set to 0 or Off, except for Dynamic Range, which was DR200, and Noise Reduction, which was -4. The White Balance was Auto 0R & 0B. You can see that both images are quite similar. My recipe is slightly more vibrant, has a little more yellow and slightly less red, and protects highlights a tad more. I also added a little Grain to my recipe to give it a more film-like appearance. Overall, though, the differences are fairly subtle.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Yesterday I published an article about the three Fujifilm X-Mount lenses that Sigma announced. These were already existing lenses within Sigma’s lineup, and they simply converted them for use on Fujifilm cameras. I stated that Sigma should have modified the lenses by adding aperture rings, because that is an important part of the Fujifilm experience. I also hinted (without downright stating) that Sigma should have filled holes in the Fujinon lineup, instead of going head-to-head with already existing lenses (hoping the cheaper price point is enough to entice potential customers). Yes, selling discount knockoffs (I don’t mean that to sound so harsh, because Sigma makes quality products) is one strategy, but I think offering something unique would be better.
With that in mind, I thought it would be a fun exercise to explore which Sigma lenses (that already exist) would fill holes in the Fujinon lineup. These are the lenses that Sigma should have released for Fujifilm X-mount, or maybe the lenses they should release next.
Sigma 24-70mm f/2.8 Art
A high-quality mid-range zoom covering some very useful focal-lengths? A lens that is great for street, portrait, and travel? Heck, yeah! While Fujifilm offers a number of zooms covering all sorts of focal-lengths, they don’t have one quite like this.
Sigma 85mm f/1.4 Art
Fujifilm has a 90mm f/2, and an 80mm f/2.8, but they don’t have an 85mm lens or a telephoto lens longer than 56mm that has a maximum aperture larger than f/2. Seems like a winner to me.
Sigma 105mm f/2.8 Art
Fujifilm jumps from 90mm all the way to 200mm, and skips everything in-between. This would fill that gaping hole quite nicely.
Sigma 105mm f/1.4 Art
Or go crazy with the “bokeh master.” This is a full-frame lens, but it might pair well with the upcoming X-H2….
Sigma 45mm f/2.8 Contemporary
Fujifilm doesn’t offer a 45mm lens. 35mm? Yes. 50mm? Yes. But nothing in-between. Could be a nice “compromise” if you want both a 35mm and 50mm but can’t afford both.
Sigma 65mm f/2.8 Contemporary
Fujifilm has a 60mm lens, but if you want something just a bit longer, you have to jump to 80mm, which might be too long. Both the 60mm and 80mm lenses are macro, which can be nice, but they also have their challenges (lots of focus to scroll through), so a non-macro lens might be a good option.
Sigma 70mm f/2.8 Macro Art
This might be a good in-between lens if you can’t decide on the 60mm and 80mm macros.
In my opinion, this list is what Sigma should have used when deciding on which lenses to bring to Fujifilm. These make a lot more sense to me. What do you think? Do you prefer the three lenses Sigma announced, or would you prefer some of these instead? Which lenses should Sigma release on Fujifilm next?
Whatever Sigma does, I hope that they don’t just change the mount, but modify the lenses to fit the full Fujifilm experience. As it stands now, I have zero interest in any of these lenses, mainly because of the lack of aperture rings. What do you think? Should Sigma include an aperture ring, even if they have to raise the price a little to do so?
Clearing Clouds Over Winter Ridge – Farmington, UT – Fujifilm X-Pro3 – “Standard Provia”
A couple days ago I published a new Film Simulation Recipe: Standard Provia. This recipe is the first in a new series, in which I attempt to customize each film simulation to optimize the aesthetic that Fujifilm intended—in other words, make a nice-looking recipe that is similar to yet better than the stock look of a film simulation. Provia is Fujifilm’s standard film simulation (that’s why they call it “Provia/Standard” and even abbreviate it “STD”), but it’s one of my least favorite. Sometimes, because I don’t get excited over it, I force myself to use Provia, hoping that it will improve my feelings about it.
The Provia film simulation doesn’t look like Provia film. In fact, it’s probably closer to Astia film, although it’s definitely not an exact match for that, either. There’s something that is “not right” about it to me, but I think it’s just my personal tastes. There are a lot of people who love the Provia film simulation and use it all of the time.
After I published my Standard Provia Film Simulation Recipe, I received feedback from several of you that I should have included a comparison with default Provia/Standard. So here it is! The Provia/Standard images have all of the parameters set to 0 or Off except for Noise Reduction, which is -4. Dynamic Range is DR200 and White Balance is Auto 0R & 0B. It’s basically factory Provia. These were all captured on a Fujifilm X-Pro3. Let’s take a look:
Move the bar left to reveal the default Provia/Standard image, and move it right to reveal the “Standard Provia” recipe image.
Move the bar left to reveal the default Provia/Standard image, and move it right to reveal the “Standard Provia” recipe image.
Move the bar left to reveal the default Provia/Standard image, and move it right to reveal the “Standard Provia” recipe image.
The most notable difference you might notice is that my recipe has less red, with a cooler/greener color cast that is more like typical of Fujicolor film. My recipe also has more contrast and saturation, and, in my opinion, looks better, as I find the default settings to be too flat. If you are looking for a “standard” recipe that utilizes Provia, I believe that my Standard Provia recipe is a good option.
What do you think? Do you like the default Provia/Standard settings better, or do you prefer my “Standard Provia” recipe? Let me know in the comments!
Clearing Clouds Over Winter Ridge – Farmington, UT – Fujifilm X-Pro3 – “Standard Provia”
This Film Simulation Recipe is the first in what will be a series, which will encompass several Fujifilm generations (not just X-Trans IV). I’m not exactly sure how many recipes will be in this series, but the intention is at least one for each film simulation offered by Fujifilm. This first recipe is compatible with X-Trans IV because Fujifilm sent me an X-Pro3 to try, and I have to return it soon, so I’m using it as much as practical so that I can write a review. The intention of this series is to customize each film simulation to optimization the aesthetic that Fujifilm intended. In other words, make a nice-looking recipe that is similar to yet better than the stock look of a film simulation. This first recipe, which I’ve titled simply Standard Provia, is my optimization of the Provia film simulation.
The Provia film simulation is not a facsimile of Provia slide film. I think Fujifilm just wanted to use the brandname for their “standard” colors, but there’s quite a divergence between the film simulation and the film. This recipe isn’t intended to mimic the film, but simply produce good results with the Provia film simulation (without modifying the overall aesthetic too much). The Provia film simulation is one of my least utilized, but I do believe this recipe makes good use of it.
Backlit Ivy – Farmington, UT – Fujifilm X-Pro3 “Standard Provia”
Because this recipe uses Clarity and Color Chrome FX Blue, it is only compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. If you have an X-T3 or X-T30, you could replace Clarity with a diffusion filter and ignore Color Chrome FX Blue and Grain size, and get similar results that will be just a little different.
Provia Dynamic Range: DR400 Highlight: +2 Shadow: +1 Color: +2 Noise Reduction: -4 Sharpening: 0 Clarity: -3 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Daylight, -3 Red & 0 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Standard Provia” film simulation recipe on a Fujifilm X-Pro3:
Orange Traffic Barrier – Salt Lake City, UT – Fujifilm X-Pro3
Vape On Main – Salt Lake City, UT – Fujifilm X-Pro3
Small Table Decor – Farmington, UT – Fujifilm X-Pro3
Abandoned Ice Chest – Farmington, UT – Fujifilm X-Pro3
End Post – Farmington, UT – Fujifilm X-Pro3
Hanging Around – Farmington, UT – Fujifilm X-Pro3
Blackberry Leaf in February – Farmington, UT – Fujifilm X-Pro3
Crossing With Falling Snow – Farmington, UT – Fujifilm X-Pro3
Cautious Dirt – Farmington, UT – Fujifilm X-Pro3
Winter Storm over Wasatch – Farmington, UT – Fujifilm X-Pro3
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Nature in Motion – Farmington, UT – Fujifilm X100V
The rule-of-thumb that I was taught in photography school is that the minimum shutter speed should be the closest number to the focal-length of lens for sharp handheld photographs. This, of course, is assuming good techniques (such as how you stand, how you hold the camera, and how you breathe while capturing a picture). Fujifilm X cameras are crop sensor, so we have to take that into account. For example, the 23mm lens on my Fujifilm X100V is 34.5mm full-frame equivalent, so the minimum shutter speed for hand-held (not on tripod) pictures should be 1/40, perhaps 1/30 if you’re good. If you go less than that you are in real danger of “camera-shake” blur—fuzzy pictures from your movement. Even above that, if you aren’t careful, you could get it, so I personally try not to go slower than 1/60 handheld on my X100V if I can help it. If you aren’t using good techniques at all, you might even have to use 1/125 or faster to ensure sharp pictures.
But what happens when you purposefully go slower? What happens when you deliberately shake your camera during exposure for creative effect? Let’s find out!
Note: this was a Creative Collective article, but now it’s available to everyone.
Path Insecure – Farmington, UT – Fujifilm X100V
So why did I do this? For fun. To spark creativity. Because I like doing unconventional things just to see what happens. Maybe this will help spark some creativity in you, too.
I set the shutter speed on my X100V to 1/8, which is much too slow for handheld photography. Typically, the camera would be on a tripod with such a slow shutter speed. The exact shutter speed you will need depends on the focal-length of the lens. I feel that 1/8 worked well for this camera, but if you were using a more wide-angle lens you might need to go even slower, and if you are using a more telephoto lens you might need to be a little faster.
I utilized the camera’s built-in Neutral Density filter because the shutter was going to let in a lot of light. If your camera doesn’t have a built-in ND filter, you could screw an ND filter onto the end of the lens. If that isn’t an option, simply try this technique indoors, or just before the sun rises or right after it sets, or on darker days.
I set the Flash to On. Why? My theory was that the flash would make whatever it bounced off of “sharp” for a moment, so that there would be a little sharpness in the otherwise blurry picture. I think if you are close enough to the subject this does work, and can create a ghostly effect, but was unnecessary for most of my images.
The other settings? Both Aperture and ISO were in Auto (basically, I was operating in Shutter Priority). I used the Negative Print film simulation recipe.
When I opened the shutter, I moved the camera around. Sometimes just a little. Sometimes a lot. I moved it up or down or left or right. I even tried a swirly motion a couple of times. I also tried pushing the camera forward and pulling it back. Whichever direction you move the camera and how much you move the camera during the 1/8 exposure will greatly affect the outcome, so try different ideas.
When you do this, there are a few various looks that you get. One is an abstract impressionist image, such as in Nature in Motion at the top and Three Trees at the bottom. Another is a ghostly almost-double-exposure-like picture, such as in Ghostly Chair below. A third is simply a soft dream-like fuzziness, like in Hidden Trash below. Path Insecure (above) and Fading Memories (below) are a little bit of impressionism and dream-like fuzziness mixed together.
Ghostly Chair – Farmington, UT – Fujifilm X100V
Hidden Trash – Farmington, UT – Fujifilm X100V
Fading Memories – Farmington, UT – Fujifilm X100V
Three Trees – Farmington, UT – Fujifilm X100V
This isn’t a technique for everyone, and certainly not for every photo. I could see it being a project. Maybe use this technique for a specific topic. Perhaps you’ll find that you like it more than you thought you would. If you are looking for something different to try, this might be just what you need.
Mutual Conversation – Salt Lake City, UT – Fujifilm X-Pro3 – “Agfa Ultra 100”
Agfa Ultra 100 was a short lived film—introduced in 2003 and discontinued in 2005, although it was still available for a few years after—and was Agfa’s most vibrant color negative film. I’ve been attempting to mimic this film for a little while now (ever since I published the AgfaChrome RS 100 recipe last summer), but I couldn’t get it right. This Agfa Ultra 100 recipe actually has some similarities to the AgfaChrome RS 100 recipe, and (for this particular attempt) I used that recipe as the starting point. I never used this film, so I relied on online references and a couple pictures I found in an old magazine article as samples.
I’m actually not fully satisfied with this recipe. I think sometimes it’s pretty spot-on, and I think other times it is significantly off. Of course, one film can have several different aesthetics depending on how it was shot, developed, scanned and/or printed, and viewed, so perhaps that accounts for some of it. I think an argument can be made that Color should be +3 or even +4, but I also feel that sometimes that’s too much and +2 is just right. I think green is the least correct color, and if you do have a lot of green in the shot, you might consider increasing Color to +3 or +4 for a more accurate facsimile, although you might find reds and blues are rendered too strong if you do that.
Urban Sunstar – Salt Lake City, UT – Fujifilm X-Pro3 – “Agfa Ultra 100”
Because this recipe uses Classic Negative, Clarity, and Color Chrome FX Blue, this Agfa Ultra 100 film simulation recipe is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras.
Classic Negative Dynamic Range: DR400 Highlight: +2 Shadow: -2 Color: +2 Noise Reduction: -4 Sharpness: -1 Clarity: -3 Grain Effect: Weak, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Daylight, -2 Red & +3 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +1 (typically)
Example photographs captured using this “Agfa Ultra 100” film simulation recipe on a Fujifilm X-Pro3:
Red – Salt Lake City, UT – Fujifilm X-Pro3
Blu – Salt Lake City, UT – Fujifilm X-Pro3
Orange – Salt Lake City, UT – Fujifilm X-Pro3
Walker Reflected – Salt Lake City, UT – Fujifilm X-Pro3
Common Signs – Salt Lake City, UT – Fujifilm X-Pro3
Pitched In Street Sign – Salt Lake City, UT – Fujifilm X-Pro3
Elevator – Salt Lake City, UT – Fujifilm X-Pro3
Street Crossing – Salt Lake City, UT – Fujifilm X-Pro3
Sidewalk Seat Shadow – Salt Lake City, UT – Fujifilm X-Pro3
Blue Boxes – Salt Lake City, UT – Fujifilm X-Pro3
Urban Congo – Salt Lake City, UT – Fujifilm X-Pro3
Sidewalk Closed In 150 Feet or Less – Salt Lake City, UT – Fujifilm X-Pro3
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Fujifilm X-Trans is 10-years-old, and I thought it would be fun to list the 10 most important X-Trans models of all-time. The first X-series camera was the X100, but it had an EXR sensor, and not X-Trans. The first with the X-Trans sensor was the X-Pro1, which came out in 2012. I already wrote an article explaining the history of that camera, which you can read here. For this post, I’ll simply give my opinion on which X-Trans models were the most important.
Here we go!
10. Fujifilm X-E1
The Sexy One—I mean, X-E1—was the second X-Trans camera introduced by Fujifilm, and offered retro rangefinder styling in an affordable package. It had its problems (many that were fixed or improved by firmware updates), which hindered its commercial success, yet it is still a beloved camera 10 years later. Without the X-E1, there would be no X-E2, X-E2s, X-E3, or X-E4. While the X-E lineup isn’t usually a top-seller for Fujifilm, it is much loved by those who do own them. The Fujifilm X-E1 was my introduction into the X-series, so without it there would be no Fuji X Weekly.
9. Fujifilm X-Pro2
The X-Pro2 was not only the first X-Trans III camera, it was the first with a dual memory-card slot. For some, this was the first X-Trans camera that could be taken seriously—clearly aimed at professional photographers. It not only looked good, but had the specs and features to convince serious photographers to take a close look, and maybe even sell their full-frame gear in favor of Fujifilm.
8. Fujifilm X-T4
The X-T4 is the full-frame killer. Maybe that’s an exaggeration, but the it is an amazing tool for both professional photographers and videographers. To date, the X-T4 is the most “premium” X-series model made by Fujifilm, and is the camera that’s convinced countless people to choose Fujifilm over other brands.
7. Fujifilm X100V
The X100V is a solid update to the X100F, and is my “desert island” camera—if I could only have one, it would be this. For a lot of people who are unsure if they want to jump into the deep end of the Fujifilm pool, the X100-series allows them to get their feet wet without having to invest in the whole system. Once people do dip their toes, they discover that the water is fine. Although all of the five X100-series cameras are great, including the original X100, the X100V is definitely the best.
6. Fujifilm X-Pro3
The X-Pro3 is a controversial camera due to its unusual backwards-mounted rear screen. People seem to love or hate it. While it might be Fujifilm’s most polarizing camera, it has been a solid success, and a sought-after body since its introduction. Also, this was the first camera with Classic Negative, Clarity, and Color Chrome FX Blue, among other things.
5. Fujifilm X-H1
While it was initially considered a flop, the X-H1 now has a cult-like following. The X-H1 was even more top-of-the-line than the X-T2. It was the first X-Trans camera with the Eterna film simulation and IBIS, and had the best video specs when it was released. In a lot of ways, it was the X-T4 of the X-Trans III generation models (although in a body more reminiscent of the GFX50S), and was supposed to convince full-frame shooters to consider Fujifilm instead. Due to its high MSRP, sales were super sluggish, and Fujifilm had to steeply slash the price tag to get people to buy it. Those who did buy it were rewarded with an amazing camera! It’s a workhorse for many professional photographers, even if they own newer models, they often choose the X-H1 to do the heavy lifting.
4. Fujifilm X100F
The Fujifilm X100F is the camera that I first started making Film Simulation Recipes with. Fuji X Weekly was originally a long-term review (or journal, really) of this camera. The impact the X100F has had on the Fujifilm community and even the photography continuum cannot be quantified, but know that’s it’s massive. For me, the X100F changed my life, and that’s not hyperbole—it took a lot of self-control to not put it at the number one spot on this list.
3. Fujifilm X-T3
Have you ever wondered why Fujifilm hasn’t discontinued the X-T3 even though the X-T4 has been out for almost two years? It’s because the X-T3 is the top-selling X-series camera of all time, and continues to sell really well even today. Yes, it’s about three-and-a-half years old, but as long as people continue to buy it in droves, it will continue to be manufactured by Fujifilm. I wouldn’t be surprised if the X-T4 is discontinued before the X-T3. This is the only camera on this list that I haven’t personally used, but I know for certain that it’s a great model.
2. Fujifilm X-T1
A lot of people might be surprised that the X-T1 made it so high on this list, not because the camera isn’t great (because it is great), but because the reason might not seem obvious. What was so special about this model to make it all the way to number two? The X-T1 was Fujifilm’s first real commercially successful camera. Yes, the X-Trans models that came before this—X-Pro1, X-E1, X-E2, X-M1, X20, XQ1, and X100S—did well enough (more or less, depending on the camera), but the X-T1 sold significantly better than them all. It really brought Fujifilm into the forefront, and made a lot of people take notice. For a large number of photographers, the X-T1 was the first model that made them seriously consider buying X-Trans.
1. Fujifilm X-Pro1
The Fujifilm X-Pro1 was where X-Trans began. All of the current Fujifilm cameras are here today because the X-Pro1 made a big splash with its retro rangefinder design and hybrid viewfinder 10 years ago. If it had not sold well, the X-series might have ended there, or not long after. But it did sell well, and is even in-demand to this day. That’s why the X-Pro1 is the number one most important Fujifilm X-Trans camera of all time.
Conclusion
What about the other cameras that deserve to be on this list? The original X100 is not here because it is not X-Trans (a requirement for this list), but I could have included the X100S, which the first X100-series model with an X-Trans sensor. The X100T was the first camera with Classic Chrome—except that a lot of people forget that one month earlier the X30 was released with Classic Chrome, and the X100T was actually a close second. The X-T10 was Fujifilm’s first real successful mid-range model—the X-T20 and X-T30 were pretty darn successful, too, and the X-T30 II is off to a solid start. The X-S10 has also done well, and is the cheapest model with IBIS. I think there are a number of cameras that could have made this list. What do you think? Do you agree with my Top 10? Would you replace any? I’d love to hear your thoughts on this!
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Fujifilm sent me an X-Pro3 camera and 33mm f/1.4 lens to borrow for a few weeks. I get to use them, but I don’t get to keep them. In fact, if you’ve ever read a review of this camera or lens, there’s a good chance that this exact copy is what was reviewed. I don’t have any obligation to write a review, but of course I will, after I’ve had a chance to put the camera and lens to the test.
My initial impressions of the X-Pro3?
I currently own an X-Pro1, and I’ve extensively used an X-Pro2; the X-Pro3 is a very similar camera. The headline difference is the backwards-mounted rear screen, which I think people will love, hate, or both love-and-hate simultaneously. It’s way too early to know for sure, but I think I’m going to be in that love-hate category. Maybe once I use it more I will feel differently about it. I wonder, though, why the rear screen doesn’t swing to the side instead of down? I find it less than ideal when I need to use it, but I do like that the camera is designed to encourage you to not use the screen, because, when you don’t need it, the experience is better when it is hidden. I love the little “box top” screen that’s in its place. Inside, the X-Pro3 is a lot like other X-Trans IV cameras, such as the X100V. The ability to save in 16-bit TIFFs could be reason enough to buy this camera, although I haven’t examined this closely yet. So far, the X-Pro3 seems to be a workhorse body that one could happily use for many years. Be on the lookout for a full-review in a few weeks.
My initial impressions of the Fujinon 33mm f1.4?
Amazing lens! Do I need to say more? It’s definitely bigger and heavier than my Fujinon 35mm f/2, but also perhaps optically superior and with great character, which says a lot, because the 35mm f/2 is a great lens. The Fujinon 33mm f/1.4 is for the X system what the Fujinon 63mm f/2.8 is for the GFX system, but maybe better. There will be a full-review of this lens in the future, but I can tell you right away that you won’t be disappointed if you should buy it—it really is a fast 50mm-equivalent prime lens that’s top-notch.
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
I’ve been asked a few times recently what adapter and filters I use on my Fujifilm X100V. I will state right off the bat that my choices aren’t necessarily the “best” ones, it’s just what I’ve done. There are likely better options, and perhaps different choices that would be better for you, so keep that in mind. With that said, let me get right into the adapter and filters that I use on my Fujifilm X100V.
The X100V doesn’t initially appear to be able to accept filters. There are no screw-in threads visible. But there’s a “secret” ring around the lens that unscrews to reveal threads, but these threads cannot accept filters. You need to buy an adapter to screw into those threads that has its own threads that filters can screw into. Make sense?
The top reason why you want to do this is because the X100V is almost weather-sealed. The one unsealed point is the lens, but Fujifilm says that if you put a filter in front of it, that should give you protection from the elements. To complete the weather-sealing process, you need to buy an adapter and filter.
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Fujifilm offers their own adapter, but it’s not cheap. I’m a cheapskate, so I went with the $10 Haoge adapter instead, and saved about $40. I think the only disadvantage is that the lens cap fits a little loosely over the adapter, but probably fits snugly on the Fujifilm option (just guessing). There are lots of other choices, including some that have a lens hood included. I don’t think which adapter you choose is all that important, but obviously it’s got to work for you.
I have tons of filters, some going back to the film days. Many of them are not 49mm (the correct filter size for the X100V), but some are, and I don’t use all of them. The number one most used filter is the Fotasy 49mm Ultra Slim UV, which is less than $10. For under $20, it’s possible to add that layer of weather protection to give you some peace of mind. I also own a Hoya UV filter (that predates my X100V), but it’s black and I prefer silver, so I don’t usually use it (yet I have used it), and a Nicna UV filter, which I have no idea where it came from. The UV filter doesn’t do much for you photographically, but it does give a layer of protection, and 90% of the time this is how my X100V is configured.
About 10% of the time I use a diffusion filter instead of (or in conjunction with) the UV filter. The one that I use the most is the 5% CineBloom, which gives a very subtle effect. A 10% CineBloom and 1/4 Black Pro Mist are occasionally used, while a 20% CineBloom is almost never used because it is so strong. If I could only have one, it would be the 5% CineBloom, but I do use the 10% CineBloom and 1/4 Black Pro Mist sometimes, and even use them together, so it’s nice having them around. I have considered buying a 1/8 Black Pro Mist because I think I’d use it frequently, but I haven’t pulled the trigger on that one yet.
What’s left? I own a Tiffen 49mm Circular Polarizer that I rarely use. I probably should use it more, because CPLs are great for reducing unwanted reflections. To some extent, it’s theoretically possible to mimic Color Chrome FX Blue with a CPL filter, I think, although I’ve never tried. I also have a Hoya Intensifier (a.k.a. Didymium filter or Starscape filter) that I’ve used a few times. I have some 49mm color filters for B&W film photography, but obviously those don’t work well on the X100V (I tried). I also have a Hoya 80A filter, which actually does work on the X100V, but I pretty much never use it.
I’m not sure which filters are right for you, but at the very least consider attaching an adapter and UV filter to give your Fujifilm X100V a little more weather protection. I like using diffusion filters sometimes, but not all of the time, and usually less is more when it comes to these. That’s what works for me, but you’ll have to figure out what works for you. Hopefully, this article is helpful to some of you. Let me know in the comments which filters you use on your X100-series camera, because I’d love to know.
I’m a Fujifilm fanboy, but this new Nikon looks quite nice.
Maybe you can relate: I’m a sucker for retro-inspired cameras, and the Nikon Zfc had me drooling the day that it was announced. I love Fujifilm, yet I have nothing against Nikon—I used to shoot with Nikon DSLRs, and a few of my favorite photographs were captured on Nikon cameras. I figured that if I’m interested in the Zfc, maybe some of you are, too, so I purchased one to try. At the very least I could compare it to Fujifilm X-Trans cameras, and explain the similarities and differences.
At first glance the Zfc looks like it’s in the same class as the Fujifilm X-T30. There are certainly some similarities between the two models. The Zfc has a rear screen and knob arrangement that’s more like the X-T4, so I thought it could, perhaps, even fall in-between those two models somewhere, and serve as an upper-mid-tier APS-C mirrorless camera. It’s hard to tell from looking at pictures, but that’s what I was expecting.
When I pulled the Zfc out of the box, a few things surprised me. First, the camera is bigger than I expected. It’s much larger and noticeably heavier than the Fujifilm X-E4 that I frequently shoot with. It’s a little larger and slightly heavier than my X-T30. It’s almost as big as an X-T4, although much lighter. The Fujifilm camera in my collection that’s most similar in size and weight to the Zfc is the Fujifilm X-T1.
The Nikkor 28mm f/2.8 lens (that came with the camera) is massive, too. I thought, perhaps, there’d be some similarities between the Fujinon 27mm f/2.8 lens and the Nikkor glass, but other than maximum aperture and similar focal-length, these two lenses are much different. The Fujifilm lens is smaller, lighter, sharper, and superior in pretty much every way. That’s not to say that the Nikkor lens is bad, but it’s definitely not as good as the Fujinon, which happens to be my favorite lens. Nikon didn’t include an aperture ring on the 28mm f/2.8 (or any other Z glass), which I think is a big oversight.
Another surprise is how plasticky the Zfc feels. It doesn’t look plasticky, and its weight suggests that it’s not all that plasticky, but it definitely feels plasticky when you use it. I wouldn’t trust this camera to survive a hard fall. It doesn’t appear to be a cheap camera (and its price tag would confirm this), but when you use it, the feeling is that it’s a budget body, and not mid-range.
After considering where it best compares to Fujifilm models, the one I think the Zfc is most comparable to is the X-T200. If Fujifilm had put markings on the customizable unmarked knobs, the two cameras would be very similar (aside from size and weight). For those who don’t know, the X-T200 was Fujifilm’s budget option, with a price of $700 for the body or $800 bundled with a kit zoom. The X-T200 didn’t last long (both introduced and discontinued in 2020) because it didn’t sell well. Perhaps the Zfc sits a little above the X-T200, but in my opinion that’s the most similar Fujifilm model.
One last surprise is that the shutter and ISO knobs are more for looks than practical use. You see, there’s a PASM switch, and only when you are in the correct PASM position do the knobs actually do anything. If this camera had been designed correctly, PASM would be completely unnecessary, and the knobs would always do something if you turned them. It’s a much different user experience than what most Fujifilm cameras deliver, and maybe more confusing.
I understand that those who don’t have a background in classic film cameras and have only used PASM might be intimidated when trying Fujifilm X cameras for the first time. I think that’s one reason why the X-T200 and X-S10 cameras were designed the way they were: intended to be less intimidating to the uninitiated. So perhaps Nikon had that in mind with the Zfc, but this was certainly an opportunity to break the mold and offer a different experience to their users, and they just couldn’t do it—it really is a missed opportunity.
Fujifilm is known for their Film Simulations and JPEG output. I’ve published over 200 Film Simulation Recipes to achieve various looks straight-out-of-camera. I even made an App (available for both Android and Apple) for these JPEG recipes. Fujifilm used their vast experience with film to create profiles that are modeled after film. For many Fujifilm photographers, Film Simulations (and recipes) are an intrinsic element of the user experience and picture aesthetic. For Nikon, their lesser-known equivalent is called Picture Control, with a subset called Creative Picture Control. While Fujifilm’s Film Simulations are inspired by film, Nikon’s Picture Controls are inspired by feelings and mood. It’s a much different take, and not necessarily better or worse—simply a divergent approach that’s worth noting. Fujifilm infuses an analog soul into their digital images, while Nikon infuses emotions that may or may not be analog-esque into their images.
Those who are regular readers of the Fuji X Weekly blog already know this, but for those who don’t, I’m a JPEG shooter. Many years ago I was a RAW guy, but Fujifilm cameras changed that for me. Shooting JPEG saves me time while making the process more enjoyable, as I get the look I want straight-out-of-camera without the need to edit. That’s my perspective.
It’s clear to me that, over the last decade, Fujifilm has invested more R&D dollars and time into their JPEG output than Nikon has. The Zfc is a new camera, but the JPEG quality is closer to X-Trans I—which is 10-years-old now—than X-Trans IV, which is very soon to be replaced by X-Trans V. When viewing on social media or the internet, you can’t tell, but when pixel-peeping, the Fujifilm X-E4 (for example) produces sharper, more detailed images, with more pleasing noise and fewer banding and artifact issues than the Zfc. It’s not a night-and-day difference (and I’m not suggesting that the JPEGs from the Zfc are bad), but it’s definitely noticeable when viewed closely, and I personally prefer the pictures produced by the X-E4; however, it only really matters if you are pixel-peeping, cropping deeply, or printing posters, and otherwise doesn’t matter.
If you want the full Fujifilm photography experience, there’s no substitute for Fujifilm. The Nikon Zfc looks like it could deliver a similar experience, but it falls short in multiple ways. I would suggest the Fujifilm X-T30 II or X-E4 instead, which are similarly priced (cheaper actually), and are better cameras, in my opinion. The Fujifilm X-T3 WW is another solid option with a similar price point (slightly more expensive). With that said, the Zfc is still a very beautiful camera that’s fun to use and produces quality pictures.
If you already own a Nikon Z camera and lenses but like retro-styling, the Zfc is for you. An advantage of Nikon Z is that Z lenses are compatible with their full-frame mirrorless line. So perhaps you start with the Zfc and 28mm lens, but then you later add a couple lenses to your collection, and even later buy a Z7 II. Or maybe it’s the other way around: your Z7 II is big and heavy, so you add a Zfc for travel and walk-around photography, and the lenses you already own are compatible. This is why you buy a Nikon Zfc, I think.
Obviously, they’re hoping that the Zfc will convince those from other brands to try Nikon. My first thought is that those “moving up” from Micro-4/3 will be tempted by this model, although I’m not sure that this camera is convincing enough. Those dissatisfied by Sony, Canon, and Pentax might consider this model, if based on nothing more than looks, which is most likely what it would be based on because the Zfc lacks innovation that would attract photographers from other brands.
I don’t think the Zfc will snag very many from Fujifilm. Maybe if you’ve never liked the lack of PASM—maybe. But other than good-looks, which your Fujifilm camera already offers, the Zfc doesn’t give you a good reason to switch brands. I can tell you with certainty that I won’t be switching brands anytime soon.
If you like your cameras to have retro-styling, the Nikon Zfc is one of your options. It’s a good camera that’s fun to use, but it’s not as good or as fun as a Fujifilm X-Trans model, like the X-T30 II or X-E4, which are slightly less expensive. My recommendation is to buy the Nikon Zfc only if you are already invested into the Z system, or if you are planning to get into that system for the long-term. Otherwise, there are better options, and if you are looking for those better options, let me point you towards Fujifilm.
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on the Fuji X Weekly blog. There’s a real cost to running this website. I also put a lot of my own time into writing the posts. If you’ve found something on Fuji X Weekly helpful to you and you’d like to give back, this is a good place to do it. You can donate to this blog using PayPal by clicking below. I appreciate it! Thank you for your support! Please do not feel obligated to give, but do so only if you want to.
What’s in the February issue? The cover story is Flare For Photography, which takes a close look at lens flare. There are a total of 18 photographs this month, including the cover image (above). I hope that you find it enlightening, entertaining, and inspiring!
Note: this was a Creative Collective article, but now it’s available for everyone.
