The article states that the apps in the list were selected for “exceptional performance” in one of three categories: User Experience, Core Functionality, or Innovated Solution. I’d be curious to know which category the app scored exceptionally well in. The article goes on to say that the list “is ranked based on a balance of review ratings, and number of reviews.” In other words, the Fuji X Weekly App made the “best Android camera app” list because of you! I’m grateful, and humbled by your kindness and support!
Of course the elephant in the room is that the Fuji X Weekly App isn’t a camera app (although it is definitely closely related to cameras and photography). Still, I’ll take it. A lot of work went into creating the app, and a lot of work continues to go into it, as some great improvements are in the works, which I hope to get out later this year.
I want to give a “thank you” to LeapDroid for including the Fuji X Weekly App in their list and an even bigger “thank you” to everyone who downloaded the app and gave it a review. You are appreciated! Also, I have to pause here for a moment and give a huge shout-out to Sahand Nayebaziz, who’s really the one that made this app (and the iOS version) happen. He’s the brains and skills behind the programming, and a talented photographer, too, who shoots a Fujifilm X-T4, often with the Kodak Portra 400 film simulation recipe. Thanks, Sahand!
November Tree – Farmington, UT – Fujifilm X100V – “Fujicolor Negative”
Fuji X Weekly Patrons have had early access to this Fujicolor Negative film simulation recipe since the launch of the Fuji X Weekly app, but now it is available to all! What film does this recipe resemble? I’m not completely certain. I was messing around with the settings and stumbled upon something that I liked, which means that this recipe wasn’t intended to mimic any specific film; however, I think it’s kind of similar to Fujicolor F-II or Fujicolor Super G, but it’s not really like either. It does have a vintage Fujicolor vibe thanks to the Classic Negative film simulation that it uses as its base. Whatever film this recipe might or might not resemble, it looks beautiful!
I really enjoy using this recipe—it just produces good results that have a film-like quality. It has good contrast and natural or perhaps somewhat muted colors. This could be my go-to settings for everyday photography—that is, if I wasn’t constantly creating new recipes!
Coming Out of the Shadows – Layton, UT – Fujifilm X100V – “Fujicolor Negative”
This Fujicolor Negative film simulation recipe is only compatible (as of this writing) with the Fujifilm X-Pro3, X100V, X-T4, X-S10 and X-E4 because it uses Classic Negative and Clarity. If you have a GFX camera like GFX-50S that has Classic Negative but doesn’t have Clarity, give this recipe a try anyway—it won’t be exactly the same but should be pretty darn close.
Classic Negative Dynamic Range: DR400 Highlight: -2 Shadow: +3 Color: -4 Noise Reduction: -4 Sharpening: -2 Clarity: -3 Grain Effect: Strong, Small Color Chrome Effect: Off Color Chrome Effect Blue: Off White Balance: Auto, -1 Red & -6 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +2/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this Fujicolor Negative film simulation recipe on my Fujifilm X100V:
Winter Berries – Farmington, UT – Fujifilm X100V
Small Stop Sign – Farmington, UT – Fujifilm X100V
Waste Management – Farmington, UT – Fujifilm X100V
Pile of Pots – Farmington, UT – Fujifilm X100V
Spilled Sakrete – Farmington, UT – Fujifilm X100V
Framed – Farmington, UT – Fujifilm X100V
Reserved Rose – Farmington, UT – Fujifilm X100V
Oh Deer – Farmington, UT – Fujifilm X100V
Book of Film – Farmington, UT – Fujifilm X100V
Succulent Shelf– Farmington, UT – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Those recipes in the app are the same ones that you know and love from this website, but now take them with you on the go, and have them at your fingertips wherever you are! I made most of the recipes myself, which you can imagine takes a lot of time and work. There are some recipes that were created by others—fans of this website—and I always ask for and receive permission before publishing; plus several recipes that were a collaborative effort between myself and others. With all of these recipes, there are a whole lot of different picture aesthetics that you can get straight out of your Fujifilm camera. There’s nothing like this with any other camera brand!
Really, though, the app is just the beginning. There are so many great things that are in the works right now! I wish that I could share them with you, but I’m keeping it all under wraps until they’re closer to being ready. It takes time, and there are plenty roadblocks that I could encounter. I don’t want to overpromise and underdeliver. What I can say is that these things wouldn’t be possible without the support of Fuji X Weekly Patrons. Yes, becoming a Fuji X Weekly Patron unlocks advanced features on the Fuji X Weekly — Film Recipes App and gives you the best app experience, but what it really does is allow these great things that are in the works to become reality. Without the Fuji X Weekly Patrons these things wouldn’t happen, so let me give a big “Thank you!” to all the Patrons! Hopefully within the next few months I can begin to reveal and announce some of these great new things.
As always, I’m continuously working on new film simulation recipes. I have many that are being tested right now, and a long list of others that I plan to tackle. At the current rate, there could be over 200 film simulation recipes on this website and the app by the end of the year! Amazing!
Let me know in the comments which recipe is your personal favorite!
Inspiration for film simulation recipes can come from unusual places. This recipe, for example, was inspired by a promotional photograph of Ron Howard for the movie American Graffiti hanging on the wall of Mels Diner in Reno, Nevada. A little trivia: Ron Howard shoots Fujifilm cameras—or, at least, he’s been spotted sporting an X100F. Anyway, it seems unlikely, but it’s true, that an old image of Ron Howard from 1973 hanging on the wall of a restaurant in Reno inspired a new recipe that will be used by hundreds—maybe thousands—of Fujifilm photographers across the world.
This particular picture, which you can see in the image below towards the left-side, had a cross-process look to it, like reversal film developed in negative film chemistry. Of course, cross-processed film can have many different looks, depending on several factors, including (especially) the film used. I have no idea what film or process was used for that Ron Howard picture—I tried researching it, but came up empty; however, while I was waiting for my dinner to arrive at the table, I fiddled with the settings on my Fujifilm X100V and created a facsimile to that picture aesthetic.
Picture of Ron Howard (left-side) that inspired this recipe… captured with this recipe.
The photographer who captured the picture is most likely Dennis Stock. I couldn’t find a whole lot about what films he used for his color photographs or his darkroom techniques. Dennis was a legendary Magnum photographer who was best known for his celebrity photographs. His picture might not actually be cross-processed film, but it has a cross-processed look nonetheless.
The reason why I named this recipe “Xpro ’62” is because Xpro is a common abbreviation for “cross-process” and 1962 is the year that American Graffiti takes place. Promotional posters for the movie often included the question, “Where were you in ’62?” I thought that “Xpro ’62” would be a logical fit. Because this film simulation recipe uses the Classic Negative film simulation and other new JPEG options available on the newer cameras, it is only compatible with (as of this writing) the Fujifilm X-Pro3, X100V, X-T4, X-S10 and X-E4. Also, for some of the pictures in this article I used a Tiffen 1/4 Black Pro Mist filter to diffuse the highlights (such as Empty Diner at the top).
Wharf – Santa Cruz, CA – Fujifilm X100V – “Xpro ’62”
Classic Negative Dynamic Range: DR400 Highlight: +3 Shadow: 0 Color: +4 Noise Reduction: -4 Sharpening: -4 Clarity: -4 Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto, -3 Red & -9 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +1/3 (typically)
Example photographs, all camera-made JPEGs using this new “Xpro ’62” film simulation recipe on my Fujifilm X100V:
Cigarettes – Reno, NV – Fujifilm X100V
Wall Harley – Reno, NV – Fujifilm X100V
In Bottles – Reno, NV – Fujifilm X100V
Stay Apart – Hollister, CA – Fujifilm X100V
Casa de Cherries – Hollister, CA – Fujifilm X100V
Basketball Hoop Unused – San Francisco, CA – Fujifilm X100V
Stop Turning – Santa Cruz, CA – Fujifilm X100V
Tracks & Bridge – Santa Cruz, CA – Fujifilm X100V
Suburban Truck – Reno, NV – Fujifilm X100V
Electric Intersection – Reno, NV – Fujifilm X100V
Flower by the Path – Reno, NV – Fujifilm X100V
Flowers & Stone – Hollister, CA – Fujifilm X100V
Lower Yosemite Falls – Yosemite NP, CA – Fujifilm X100V
Tree & Lower Falls – Yosemite NP, CA – Fujifilm X100V
Yosemite Trees – Yosemite NP, CA – Fujifilm X100V
Sentinel Above Merced River – Yosemite NP, CA – Fujifilm X100V
Upper Yosemite Falls – Yosemite NP, CA – Fujifilm X100V
El Cap – Yosemite NP, CA – Fujifilm X100V
El Cap & Merced – Yosemite NP, CA – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Don’t Walk Under Falling Bicycles – Farmington, UT – Fujifilm X-T30 – “Chrome Bypass”
There are a number of X-Trans IV film simulation recipes that I’ve had multiple requests to create versions for that are compatible with X-Trans III and X-T3 and X-T30 cameras. LomoChrome Metropolis and Bleach Bypass are two that are commonly requested. These recipes require JPEG settings that don’t exist on the “older” cameras, including the Classic Negative or Eterna Bleach Bypass film simulations. I knew it would be impossible to recreate those recipes for X-Trans III and the X-T3 and X-T30 cameras, but I wanted to get as close as I could. After much experimenting, I came up with some settings that are sometimes similar to the LomoChrome Metropolis recipe and are sometimes similar to the Bleach Bypass recipe, and sometimes not like either.
What the LomoChrome Metropolis and the Bleach Bypass recipes have in common are that they’re both high in contrast and low in color saturation. There are some other similarities between them, but there’s plenty that’s different, too. This recipe with certain subjects and in certain light situations can resemble one or the other, or neither. It’s as close as I could get. If you like the LomoChrome Metropolis and Bleach Bypass recipes, this is your best bet for X-Trans III and X-T3 and X-T30 cameras (aside from doing double-exposures). While it’s not as “perfect” as I was hoping to achieve, I think it’s a pretty good recipe for capturing dramatic pictures. It’s kind of (but not really) the low saturation version of Dramatic Classic Chrome.
Because these settings resemble both the LomoChrome Metropolis and the Bleach Bypass film simulation recipes, I decided to name this recipe Chrome Bypass, taking a little from each name. I don’t currently have access to an X-Trans III camera, so I don’t have any samples captured with a Fujifilm X-Trans III camera, but it should look very similar.
PRO Neg. Std Dynamic Range: DR200 Highlight: +3 Shadow: +4 Color: -4 Color Chrome Effect: Off or N/A Sharpness: -1 Noise Reduction: -4 Grain Effect: Strong White Balance: Auto, +2 Red & -5 Blue ISO: Auto up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Sample photographs, all camera-made JPEGs, captured with a Fujifilm X-T30 using this “Chrome Bypass” film simulation recipe:
Mountain Teasels – Farmington, UT – Fujifilm X-T30
Cloudy Branches – Farmington, UT – Fujifilm X-T30
Summer Tree – Farmington, UT – Fujifilm X-T30
Country Fence & Old Tires – Farmington, UT – Fujifilm X-T30
Tulip Pot – Farmington, UT – Fujifilm X-T30
Colorful Tulips – Farmington, UT – Fujifilm X-T30
Handy Dandy Grill – Farmington, UT – Fujifilm X-T30
Little Bit of Green – Farmington, UT – Fujifilm X-T30
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
One of my favorite film simulations is Eterna. There’s a special quality to it that’s different than the other film simulations, with its low contrast and muted colors. Yes, you can get pretty close to Eterna using PRO Neg. Std, but you cannot completely match the lovely subtle tonality of it. I think the Eterna film simulation is a little underrated, as it’s a great base for crafting recipes, and I was eager to create a new look with it—so I did!
Real Eterna is a motion picture film. Actually, there have been a number of different film stocks that Fujifilm has given the name Eterna to. The film simulation of the same name doesn’t exactly match any specific Eterna film, yet it has a great general Eterna cinematic feel. In my opinion, the Eterna film simulation is good for achieving an analog color negative film aesthetic.
The first recipe that I created that uses the Eterna film simulation is simply called Eterna, and I really like how that one turned out. I wanted to make something similar, but not identical, using the additional JPEG options that Fujifilm has added to their newer X-Trans IV cameras. I wanted a warm vintage film look—something that could possibly be confused as being actual analog—without being based on any specific film. I think it looks pretty good, and I hope that you do, too.
El Capitan – Yosemite NP, CA – Fujifilm X-E4 – “Eterna v2”
Because this film simulation recipe requires the new Auto White Priority white balance, it is only compatible with the X-T4, X-S10 and X-E4; however, for outdoor natural light photography, using Auto white balance will produce identical results, which means that you can use this Eterna v2 recipe with the X100V and X-Pro3! For indoor artificial light photography, using Auto white balance will produce overly warm images, so Auto White Priority works better, but right now only the three newest Fujifilm X cameras have that option. For the X-T3 and X-T30, in addition to using Auto white balance, you’ll have to disregard Color Chrome Effect Blue and Clarity, and consider setting Highlight to +2 and Shadow to +1 plus Sharpness to -2 to compensate, as well as disregard Grain size (simply use Strong). It won’t be identical, but it will be very similar—I tested it out on my X-T30 and it works.
Eterna Dynamic Range: DR400 Highlight: +3 Shadow: +2 Color: +3 Noise Reduction: -4 Sharpness: 0 Clarity: -3 Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto White Priority (X100V + X-Pro3: Auto), +4 Red & -7 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Eterna v2” film simulation recipe on my Fujifilm X-E4:
Faux Plant on a Table – Farmington, UT – Fujifilm X-E4
J.C. Higgins – Farmington, UT – Fujifilm X-E4
Empty Grapefruit Box – Bountiful, UT – Fujifilm X-E4
Duerden’s Will Call – Bountiful, UT – Fujifilm X-E4
Reaching Tree Branches – Bountiful, UT – Fujifilm X-E4
Flower Tree – Farmington, UT – Fujifilm X-E4
Click – Layton, UT – Fujifilm X-E4
Sevenhundred Sixty – Farmington, UT – Fujifilm X-E4
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Joshua & Joy at a Creek – Layton, UT – Fujifilm X-T1 – “Portra v2” – Photo by Jon Roesch
I’ve been wanting to create a Kodak Portra 400 film simulation recipe for Fujifilm X-Trans II cameras for a long time now. I’ve had a Portra 160 recipe on this website for awhile, but I’ve never created a Portra 400 recipe for this sensor. I’ve actually created five different Portra 400 recipes for X-Trans III and IV cameras, but those don’t work on X-Trans II. I made a guess on my Fujifilm X-T1 on what might be a good Portra 400 recipe, handed the camera to my son, Jon, and let him capture some pictures with it. You might remember that Jon created his own Classic Chrome recipe; this time I made the recipe, but I let him capture the pictures.
You might be wondering why I didn’t call this recipe “Portra 400” but named it “Portra v2” instead. While I believe that this recipe is similar to Portra 400, I do plan to create a more accurate recipe. Actually, that was my intentions with these pictures: reprocess the RAW files in-camera to refine the Portra look; however, as I reviewed the pictures, I liked the aesthetic created by these settings, so I decided to keep this as its own recipe. I will still work on a different Portra 400 recipe for X-Trans II.
Trees – Layton, UT – Fujifilm X-T1 – “Portra v2” – Photo by Jon Roesch
One film can have many different aesthetics, depending on how it’s shot, developed, scanned or printed, and this is especially true with Kodak Portra 400. Portra can have many different looks. This recipe does resemble one of those aesthetics, but it definitely doesn’t resemble all of the aesthetics, or even the most common. If you do like Portra, I’m confident that you’ll appreciate these settings, which is compatible with all X-Trans II cameras that have the Classic Chrome film simulation.
Classic Chrome Dynamic Range: DR200 Highlight: -1 (Medium-Low) Shadow: -1 (Medium-Low) Color: +2 (High) Sharpness: -1 (Medium-Low) Noise Reduction: -2 (Low) White Balance: Daylight/Fine, +4 Red & -4 Blue ISO: Auto up to ISO 3200 Exposure Compensation: +2/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured by Jon on my Fujifilm X-T1 using this Portra v2 film simulation recipe:
Water – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Fence Tree – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Trees & Lake – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Creek in the Woods – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Trees & Leaves – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Moss on a Log – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Grass – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Bridge – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
My Friend – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Wet Radio Flyer – Farmington, UT – Fujifilm X-E4 – “Old Kodak”
The Fuji X Weekly app is free, yet becoming a Fuji X Weekly Patron unlocks the best app experience! One benefit of being a Patron is you get early access to some new film simulation recipes. These early-access recipes will eventually become available free to everyone in time, including this new one. In fact, a few of the original early-access recipes have been publicly published on this blog and the app, so everyone can now use them. Patrons help support Fuji X Weekly and, really, without them there would be no app. So I want to give a special “thank you” to all of the Patrons!
This new recipe, called Old Kodak, is similar to Vintage Kodachrome and Kodachrome 1. I was recently viewing some old pictures captured on various Kodak films, and I was reminded of those two film simulation recipes. I thought that with some tweaks I could get closer to mimicking the aesthetic of the old Kodak pictures I was looking at. If you like the Vintage Kodachrome and Kodachrome 1 recipes, you’ll really appreciate this Old Kodak recipe, too! It’s compatible with the Fujifilm X-T4, X-S10 and X-E4 cameras.
If you are a Fuji X Weekly Patron, it’s available to you right now on the app!
I’ve had many requests to create a LomoChrome Metropolis recipe, but it was impossible until Fujifilm created the new Eterna Bleach Bypass film simulation and new Auto White Priority white balance. LomoChrome Metropolis film, which is a Lomography product, has only been around for a couple of years. The film is high-contrast, with low-saturation and a warm cast. It has a cool retro-feel despite being new.
There’s a special quality to this LomoChrome Metropolis recipe. It’s almost a color version of black-and-white photography. In the right situations it creates a wonderful look that’s easy to love. It often mimics the film pretty faithfully. I’m very happy with how this one turned out, and I used it recently on a trip to Arizona.
This LomoChrome Metropolis recipe has been on the Fuji X Weekly app as a Patron Early-Access recipe since December 1st when the app launched. All of the Patron Early-Access recipes will eventually be made available to everyone as they’re replaced with new ones, which means that there’s a new recipe for Fuji X Weekly Patrons on the app right now, so if you’re a Patron, go check it out. This LomoChrome Metropolis recipe has been unlocked, so everyone now has access to it.
Dark Blossoms – Phoenix, AZ – Fujifilm X-E4 – “LomoChrome Metropolis”
Because this recipe requires Eterna Bleach Bypass, Auto White Priority and a .5 adjustment, it’s only compatible with the Fujifilm X-T4, X-S10, and X-E4 cameras. Unfortunately, all of the other X-Trans IV cameras (as of this writing) don’t have the required JPEG options, so it’s not compatible with other cameras. If you have an X-T4, X-S10 and X-E4, you might really appreciate this new film simulation recipe!
Eterna Bleach Bypass Dynamic Range: DR200 Highlight: +1 Shadow: +2.5 Color: -2 Noise Reduction: -4 Sharpening: -1 Clarity: +4 Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto White Priority, +1 Red & -7 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this LomoChrome Metropolis film simulation recipe:
Artful Girl – Farmington, UT – Fujifilm X-T4
National Geographic Bag – Phoenix, AZ – Fujifilm X-E4
Bouquet of Fake Flowers – Phoenix, AZ – Fujifilm X-E4
Blossoming Red – Phoenix, AZ – Fujifilm X-E4
Tropical Bloom – Phoenix, AZ – Fujifilm X-E4
Red Winter Berries – Farmington, UT – Fujifilm X-T4
Dirt Desert Drive – Phoenix, AZ – Fujifilm X-E4
Sunlight Through a Dormant Tree – Farmington, UT – Fujifilm X-T4
Backlit Reeds – Farmington, UT – Fujifilm X-T4
Suburban Triangles – Farmington, UT – Fujifilm X-T4
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
One of the more popular film simulation recipes that I’ve created is Kodachrome II, which was made for X-Trans III sensor cameras. While you can use that recipe on X-Trans IV cameras, the newer models have some JPEG options that the older ones don’t, so it can be fun to utilize those options to produce a different and hopefully better version of an old recipe. In this case, I have two new versions of Kodachrome II for X-Trans IV cameras.
Kodak introduced Kodachrome in 1935, and in 1961 they replaced the original film with a new and improved version called Kodachrome II and a higher-ISO sibling called Kodachrome-X. These films had more accurate color, finer grain and faster ISOs (ISO 25 and 64, respectively, compared to ISO 10) than the previous version. It was a big leap forward for color photography, and so it is no surprise that the innovators of color photography in the 1960’s and 1970’s relied heavily on it. It’s also the version that Paul Simon sang, “They give us the greens of summer, makes you think all the world’s a sunny day.”
Kodachrome II and Kodachrome-X produced a very similar look to each other. The main differences were in grain, contrast and saturation, but overall the variations were quite minor. Kodachrome-X was slightly more bold while Kodachrome II was slightly more clean. Even so, comparing slides, it’s tough to distinguish one from the other (conveniently, I have my grandparents old slides at my home). Even though I have named these two film simulation recipes “Kodachrome II” I think they more closely resembles Kodachrome-X film, but I find them to be a reasonable facsimile for both.
Yellow Arrow – Farmington, UT – Fujifilm X-E4 – “Kodachrome II v2”
Because of the toxic chemicals used in the development of this era of Kodachrome, plus the complexity of the process, Kodak changed from K-12 development to K-14 development, which ushered in new Kodachrome in 1974, called Kodachrome 25 and Kodachrome 64. This version of the film is the one that I have personally used. Interestingly enough, even though this version wasn’t all that much aesthetically different than the previous, there was a big outcry among photographers, and a large group who used Kodachrome II and Kodachrome-X did not appreciate the change.
While I created the X-Trans III Kodachrome II recipe, it was Thomas Schwab who modified it for X-Trans IV. His version, entitled Kodachrome II, is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10 and X-E4. In some of my example pictures below I used a Tiffen 1/4 Black Pro-Mist diffusion filter with my X100V. Why? Because I haven’t used this filter in awhile and wanted to. I don’t think it adds anything essential to the recipe. In fact, you might prefer the results without the filter. Thank you, Thomas, for creating and sharing this update to the original recipe!
I made a slightly modified version, entitled Kodachrome II v2, which is compatible with the X-T4, X-S10 and X-E4. I used this recipe on my X-E4 (without any diffusion filter). This isn’t intended to be a “better” recipe, just a slightly different version using the new JPEG options found in my X-E4. Both of these film simulation recipes can be found in the Fuji X Weekly app!
Kodachrome II
Classic Chrome Dynamic Range: DR200 Highlight: +1 Shadow: +2 Color: +1 Noise Reduction: -4 Sharpening: +1 Clarity: -2 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Auto, +3 Red & -4 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this new Kodachrome II film simulation recipe on my Fujifilm X100V:
Rooflines – Farmington, UT – Fujifilm X100V
Backyard Play Kitchen – Farmington, UT – Fujifilm X100V
Playing Backyard Kitchen – Farmington, UT – Fujifilm X100V
Hover Scooter – Farmington, UT – Fujifilm X100V
Chair by a Fence – Farmington, UT – Fujifilm X100V
Jo in Evening Light – Farmington, UT – Fujifilm X100V
Brothers – Farmington, UT – Fujifilm X100V
Easter Egg Basket – Farmington, UT – Fujifilm X100V
Jon with Walkie Talkie – Farmington, UT – Fujifilm X100V
Fake Plants on a Shelf – Farmington, UT – Fujifilm X100V
Kodachrome II v2
Classic Chrome Dynamic Range: DR200 Highlight: +1 Shadow: +1.5 Color: +1 Noise Reduction: -4 Sharpening: +1 Clarity: -2 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Auto White Priority, +3 Red & -5 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this new Kodachrome II v2 film simulation recipe on my Fujifilm X-E4:
Table Between Chairs – Farmington, UT – Fujifilm X-E4
Brothers Playing Together – Farmington, UT – Fujifilm X-E4
Fenced Horse – Farmington, UT – Fujifilm X-E4
Bicycle Sky – Farmington, UT – Fujifilm X-E4
Stop the Storm – Farmington, UT – Fujifilm X-E4
Grabber – Farmington, UT – Fujifilm X-E4
Handle – Farmington, UT – Fujifilm X-E4
Hand Spade – Farmington, UT – Fujifilm X-E4
Jo Holding a Toy – Farmington, UT – Fujifilm X-E4
Jo & Josh Playing – Farmington, UT – Fujifilm X-E4
There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
In my kit are two Fujifilm cameras: an X100V and an X-E4. The X100V is capable of saving seven recipes, while the X-E4 is capable of saving eight, which means that I could have had as many as 15 different film simulations ready-to-go between the two cameras! Of course, with the Fuji X Weekly app, I had access to many, many more, which I could have quickly programmed if I had wanted to. I ended up using 10 different recipes: two on my X100V and eight on my X-E4.
While I could have used as many as 15 recipes, and I ended up using 10, I think no more than eight film simulation recipes for one trip might be a better strategy. It would have made a lot of sense to have the same ones programmed into both cameras, just for consistency. Still, it’s fun to see how different recipes do in various situations, so maybe consistency isn’t as big of a deal as enjoyment is—there’s something to be said for both, so maybe it’s important to find the right balance, and that number is likely different for each person.
On my Fujifilm X100V I had seven film simulation recipes programmed into the camera, but I only used two on this trip. I ended up using the X100V a lot less than I thought I would, mostly because the X-E4 had just arrived, and I was trying to put it through its paces. If I had shot with the X100V more, I likely would have used more than just two recipes with it. On my next trip I plan to program the two cameras with, for the most part, the same recipes.
Of the eight film simulation recipes that I programmed into the X-E4, two are currently early-access recipes only available to Fuji X Weekly Patrons on the Fuji X Weekly app: Vintage Negative and Lomochrome Metropolis. These two recipes will eventually be free to everyone, but right now only Patrons can access them.
The recipes that I used the most are Fujicolor Superia 800, Kodachrome 64, and Kodak Tri-X 400. If I only used those three for the trip, I would have been happy, I think. But it’s fun to try different ones. For example, Lomochrome Metropolis and B&W IR aren’t always easy to use, but in the right situations they can produce stellar results.
The Fuji X Weekly app is a mobile film simulation recipe library containing over 100 recipes for Fujifilm cameras! The film simulation recipes in the app are the same ones that you know and love from this website, but now take them with you on the go, and have them at your fingertips wherever you are!
The Fuji X Weekly app is free! No annoying ads. Get access to 100+ film simulation recipes, which can be sorted alphabetically or chronologically. Each recipe contains an assortment of sample images, as well as a list of compatible cameras. Within each recipe there’s a place where you can keep notes, a useful feature for many of you, no doubt. The app will work offline, so if you don’t have internet access but need to find a certain recipe, no problem! The Fuji X Weekly app is a handy tool for Fujifilm photographers, an essential app to accompany your X-series camera.
This app does have some advanced features that can be unlocked by becoming a Fuji X Weekly Patron! These advanced features include filtering by sensor or camera, as well as by film simulation or color/B&W, and the ability to favorite recipes for quick access. The best app experience is reserved for Patrons!
Fuji X Weekly Patrons also get early access to some new film simulation recipes. There are currently 9 brand-new film simulation recipes that only Patrons can view. These recipes will eventually be published on Fuji X Weekly—free to everyone—but right now they’re available only to Patrons. These recipes currently are: Kodak Portra 400 v2 (for X-T30 and X-T3), CineStill 800T (for X-Trans II), Fujicolor Negative (for X100V, X-Pro3, X-T4, X-S10 and X-E4), LomoChrome Metropolis (for X-T4, X-S10 and X-E4), Porto 200 (for X-Trans III + X-T3 and X-T30), Kodak Portra 400 Warm (for X100V, X-Pro3, X-T4, X-S10 and X-E4), Provia (for X-Trans I), Vintage Negative (for X100V, X-Pro3, X-T4, X-S10 and X-E4), and Fujicolor NPH (for X100V, X-Pro3, X-T4, X-S10 and X-E4). As new early-access recipes are cycled into the app for Patrons, the others will be made available on this website and on the app free to all, so no worries.
By becoming a Fuji X Weekly Patron, which is only $19.99 annually, you unlock the app’s full potential, you get early access to some new film simulation recipes, and you help support Fuji X Weekly! It’s a win-win!
Just a quick update: the Fuji X Weekly — Film Recipes Appfor Android is now compatible with Android 9! Many of you who tried to download it but couldn’t (because it wasn’t available for your device) now can. Yea! We’re working on the possibility of making the app compatible with Android 8, but right now, if you have Android 9 or newer, you can download the app today. Google also made the app searchable in the Play Store, so you can simply search Fuji X Weekly, or follow the direct link.
The Fuji X Weekly — Film Recipes Appfor Android was released yesterday, and I’ve been overwhelmed by the feedback (this is not a complaint). The number one message I’ve received is: why is my device not compatible? The Fuji X Weekly app requires Android 10 or newer, so if your operating system is Android 9 or older it won’t work; however, compatibility with Android 9 (a.k.a. Android Pie) is coming soon, just as soon as Google approves it, hopefully before the end of the week.
A couple of months ago I conducted a survey in an attempt to find out what Android operating system most of you are using. The vast majority answered either Android 10 or Android 11. As it turns out, the survey missed a large group of people. Thankfully, none of the app’s features require Android 10, and Android 9 has sufficient security, so it wasn’t too difficult to create an update to make the app compatible with the Android 9 operating system. I’ll let you know just as soon as Google approves it; if you have Android 9 you’ll be able to get the app soon.
Most Android phones released in the past two years are capable of running on Android 10, so if your phone isn’t old, yet the Google Play store states that your device isn’t compatible, updating the software might remedy the problem. Most Android devices released in the past four years (and some that are older than that) are capable of running on Android 9, so once the app update is released, most people should be able to download the Fuji X Weekly app. Just make sure the software on your device is up-to-date.
I want to apologize for the frustration some of you have experienced because the app isn’t compatible with your device. Hopefully the issue will be resolved quickly.
***Update*** The Fuji X Weekly — Film Recipes App is now compatible with Android 9 (a.k.a. Android Pie)!
The Android version of the Fuji X Weekly — Film Recipes app is almost finished! It will be in the Google Play app store very soon! I’m not sure exactly when (it depends on how quickly Google takes to review it), but for certain the wait is almost over. With any luck, it will available to those with Android phones within a few days, hopefully no more than a week. There could, of course, be some unforeseen delays. The moment I know, I will definitely let you know, so stay tuned!
There’s a new Patron early-access film simulation recipe on the Fuji X Weekly app! It’s called Vintage Negative and is based on some old photographs that someone shared with me. If you’re looking for an aged analog aesthetic, this recipe might be for you! It’s compatible with the Fujifilm X100V, X-Pro3, X-T4, X-S10 and the upcoming X-E4.
The Fuji X Weekly app is currently only available for iOS, but progress is being made on the Android version. I think it’s not that far from being finished. As long as there are no unforeseen delays, it will be available by March 1st, hopefully sooner. The app is free, and some features and functionality can be unlocked by becoming a Patron, which is a great way to support what’s going on here. There’s some wonderful stuff in the works, and I can’t do it without you. I want to give a big “Thank You” to all of the Patrons for your support!
One of the perks of being a Fuji X Weekly Patron is that you get early-access to some new film simulation recipes. This new Vintage Negative recipe is one of those Patron early-access ones. It will eventually become available to everyone once a new Patron early-access recipe replaces it. There were seven of these recipes on the app, but I’m increasing that to ten. So far, two of the original early-access recipes have been made available to everyone, but eventually they all will, including this one. My cameras’ custom presets are chocked full of upcoming recipes and various experiments.
If you have an iPhone or iPad, be sure to download the Fuji X Weekly app—it’s free! You can get early access to the Vintage Negative film simulation recipe by becoming a Patron.
Water Tower – Salt Lake City, UT – Fujifilm X100V – “Vintage Negative”
Troller Square – Salt Lake City, UT – Fujifilm X100V – “Vintage Negative”
Yellow House Evening – Farmington, UT – Fujifilm X100V – “Vintage Negative”
Here’s a quick update: The Android version of the app is being worked on and progress is so far going quite well. I’m hoping that it will be available before March, but there’s still a long ways to go before it’s done, so it’s hard to say for sure when it will be released. The Fuji X Weekly Patrons are the ones who are making this happen, and the Android app would be nowhere close to where it is now without the Patrons. Your support is going to produce some amazing things that would not be possible without you. Thank you, Patrons!
Once the Android version is out, the next big thing is an update that will bring new features and functionality to the app. Some things will be made available to everyone, and some things will be made available only to Patrons, and some current Patron-only features will be unlocked for everyone. I don’t know how long it will take to get the update up and running, but I’m really hoping it can be done before the summer.
The Fuji X Weekly app has been downloaded 20,000 times! That’s incredible! I’m happy to provide this free resource to you, and it will only get better and better! I’m extremely appreciative of all the Patrons, because without your support none of this would be possible. We all owe you a debt of gratitude! I want to give a big “thank you” to those who have downloaded the app, to those who have shared the app on their websites and social media, and especially to all the Patrons!
The Fuji X Weekly App for iOS has been out for one week! It really has been an amazing seven days.
I want to say Thank You to everyone who has downloaded the app! I hope that it’s a useful tool for your photography. I appreciate everyone who has shared it on their social media. I’m grateful for those who left such positive reviews in the app store! The feedback and suggestions that I’ve received are invaluable. You all are the best part of the Fujifilm community!
I want to give a very special Thank You to those who are Fuji X Weekly Patrons! There’s a little bit of an immediate reward you received because you unlocked some features that give you the best app experience. But, more importantly, is the reward that you don’t yet see! The Fuji X Weekly App, as it is now, is just the beginning. There’s so much more coming, and it’s only possible because of Patrons!
An Android version of the app is being worked on, and I’m concentrating my efforts on getting it out as quickly as possible. It’s coming! But the road is still long, and I can’t say when it will be ready. Because of Fuji X Weekly Patrons, this version of the app will be out more quickly than I originally anticipated. Yea!
Once that’s complete, we will begin working on some updates to the Fuji X Weekly App that will add new features, functionality and other improvements. There will be some really interesting changes, with additions to both the free and Patron sides. The app will become better, and more fun! I can’t give you the details yet, but I can say that you’ll love it and Patrons are the ones making it possible. Thank you!
If you have an iPhone or iPad and haven’t yet downloaded the Fuji X Weekly App, you should go to the app store now and do so! If you have the app and find it useful, let me know in the comments!
The Fuji X Weekly app has the ability, for Patrons, to filter by Camera or Sensor. It might seem most obvious to pick your camera, but that might not be the best choice. Why? Let me explain.
With each recipe, I only included the cameras that are 100% compatible with that recipe. There are many situations where a recipe is 99% compatible. For example, the Fujifilm X-T4, X100V, X-Pro3 and X-S10 aren’t 100% compatible with X-Trans IV recipes intended for the X-T3 and X-T30, despite having the same sensor. Why? Because the X-T3 and X-T30 models don’t have an option for Grain size, so you’ll have to decide for yourself if it should be Small or Large, and also B&W Toning is different. Because of this, recipes like Kodak Gold 200, Eterna, Kodacolor, and many, many, many more won’t show up if you filter by X-Pro3, for example. They will, however, show up if you filter by X-Trans IV sensor. If you have an X-Pro3, if you filter by Sensor instead of Camera, you’ll see a lot more recipes. In fact, you could filter by both X-Trans III and X-Trans IV!
It’s a similar story if you have, for example, a Fujifilm X-E2. X-Trans I and Bayer recipes will work on your camera, but they’ll look a little different. Those recipes won’t show up if you filter by Camera, but they will if you filter by X-Trans I, X-Trans II and Bayer.
If you have an X-Trans III camera, it makes more sense to filter by Camera because all of the recipes that are compatible will appear (including X-Trans IV recipes that are also compatible). If you have an X-Trans IV camera, it makes more sense to filter by Sensor; however, the X-T3 and X-T30 are an exception, and like X-Trans III, it makes more sense to filter by Camera if you have either of these models. X-Trans II is a mixed bag because not every camera has the same film simulations, so if your model doesn’t have Classic Chrome and the PRO Neg. options, it will be better to filter by Camera, but otherwise by Sensor so that you can also access the X-Trans I and Bayer sensors. X-Trans I and Bayer cameras have a similar limitation (not all models have all of the film simulations), so filtering by Camera will reveal what’s for certain compatible, and filtering by Sensor will reveal what may or might not be compatible.
I hope this isn’t too confusing. My recommendation is to try both filtering options, and decide what makes the most sense for you.
The Fuji X Weekly app for iOS comes out on December 1st, which is just a couple of days away! The app is free, but Fuji X Weekly Patrons get early-access to some new film simulation recipes. What does this mean? How do you become a Patron? Read on to find out!
Advanced features on the app, such as Filtering and Favoriting, are unlocked for Fuji X Weekly Patrons. Patrons also get early-access to some new film simulation recipes—there are currently seven, which you’ll find below. As new early-access film simulation recipes are cycled into the app, these will eventually be made free for everyone, published on this blog and on the app, but right now only Patrons can view them. That’s a perk of being a Fuji X Weekly Patron! Not all new film simulation recipes will be made early-access.
How you become a Patron is through the Fuji X Weekly app. Once you download the app, if you click the Gear icon, click the filter option, or click an early-access recipe, you’ll see the option to become a Patron, which is $19.99 annually. Not only does this give you the best app experience and early-access to some new recipes, but it’s a great way to support Fuji X Weekly and to make the app even better!
Right now the Fuji X Weekly app is only for iOS—great for those with an iPhone or iPad, but not so great for those with Android devices. I’m sorry that I couldn’t release both Apple and Android versions at the same time. An app takes a lot of time and money to create, unfortunately. Getting this off the ground was no small task! Making an Android version of the Fuji X Weekly app is in the plans and one of my top priorities, but it will take a little while to get there.
The seven film simulation recipes below are on the Fuji X Weekly app, available as early-access recipes to Patrons!
Kodak Portra 400 v2
Sage & Sunset – Antelope Island SP, UT – Fujifilm X100V
This is a brand-new Portra 400 recipe for those with a Fujifilm X100V, X-Pro3, X-T4 and X-S10. This recipe doesn’t replace the “old” Portra 400 recipe, but is simply another Portra 400 look. Film can have several different aesthetics depending on how it’s shot, developed, scanned and/or printed, and viewed. Both Portra 400 recipes were created by studying actual Portra film.
Porto 200
Yellow Bike – Farmington, UT – Fujifilm X-T30
I’ve received a lot of positive feedback from my X-Trans II Porto 200 recipe, so I created a version for X-Trans III & X-Trans IV cameras. Surprisingly, I was not able to achieve a 100% match to the original recipe. I thought this would be quick to create, but it actually took a lot of time. Even though it doesn’t produce identical results to the X-Trans II version, it is still quite similar, and the results are very nice.
LomoChrome Metropolis
Stop No. 11 – Farmington, UT – Fujifilm X-T4
I’ve had so many requests to create a LomoChrome Metropolis recipe, but it’s not been possible, until now! The Fujifilm X-T4 and X-S10 cameras have the new Eterna Bleach Bypass film simulation, plus a new White Balance option, that are required to get this look. If you have an X-T4 or X-S10, this is a film simulation recipe that you just might love!
Fujicolor Negative
November Tree – Farmington, UT – Fujifilm X100V
This film simulation recipe began as an experiment to see if it was possible to create LomoChrome Metropolis using Classic Negative. It’s not possible, but the results were still interesting. It reminds me of Fujicolor C200, perhaps pushed a stop—it isn’t an exact match to that, just coincidentally similar. I think some of you are going to really appreciate this recipe.
CineStill 800T
Night Synergy – Centerville, UT – Fujifilm X-T1
This might be the best version of CineStill 800T that I’ve ever created! This is a recipe that might make you go out and buy a used X-Trans II camera, just so that you can shoot with it!
Classic Analog
Sticks & Dry Leaves – Farmington, UT – Fujifilm X-M1
This is a recipe I created for X-Trans I cameras. It started out as an attempt to get a Portra look using Provia, which didn’t really work, but the results were quite nice nonetheless.
Kodak Portra 400 v2
Walking on a Bridge – Farmington, UT – Fujifilm X-T30
Like the Portra 400 recipe at the top, this is a new version that doesn’t replace the old one, just simply supplements it for a slightly different Portra 400 look. This film simulation recipe is intended for the Fujifilm X-T3 and X-T30.
Which of these new film simulation recipe are you most excited for? Let me know in the comments!
