Diesel – Park City, UT – Fujifilm X-Pro1 – “Ektachrome”
Ektachrome is a line of color transparency film introduced by Kodak in the 1940’s. I did some research, and counted 40 different emulsions over the years that carried the Ektachrome name! Generally speaking, Ektachrome was less warm than Kodachrome (although it depends on which Ektachrome you’re referring to), and also less archival. While Kodachrome was discontinued in 2009, Ektachrome can still be purchased today. I’m not certain which (of the 40) Ektachrome films this recipe most closely resembles. It has more of a general Ektachrome feel rather than being an exact copy of a specific emulsion.
This was a Patron Early-Access recipe, but has been replaced by another, so it is now available to everyone! If you are a Fuji X Weekly App Patron, be sure to look for the recipe that replaced this one. This “Ektachrome” recipe is compatible with the Fujifilm X-E1 and X-Pro1 cameras. Unfortunately, even though the X-M1 is X-Trans I, this recipe is not compatible with that camera. I really like how this one looks, and I think some of you will really appreciate it, too!
Two Cans – Weber Canyon, UT – Fujifilm X-Pro1
Pro Neg. Std Dynamic Range: DR400 Highlight: +1 (Medium-Hard) Shadow: +2 (Hard) Color: -1 (Medium-Low) Sharpness: +2 (Hard) Noise Reduction: -2 (Low) White Balance: Daylight/Fine, -1 Red & +3 Blue ISO: Auto, up to ISO 3200 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs captured using this “Ektachrome” film simulation recipe on my Fujifilm X-Pro1:
House Flag – Farmington, UT – Fujifilm X-Pro1
Dead Wood – Farmington Bay, UT – Fujifilm X-Pro1
Cattails – Farmington Bay, UT – Fujifilm X-Pro1
Succulent Shelf – Farmington, UT – Fujifilm X-Pro1 – “Ektachrome”
Boy On Couch Watching TV – Farmington, UT – Fujifilm X-Pro1
Drinking Fountain – Weber Canyon, UT – Fujifilm X-Pro1
Two Trees – Farmington, UT – Fujifilm X-Pro1
Berries in a Tree – Farmington, UT – Fujifilm X-Pro1
Blackberry Bush – Farmington, UT – Fujifilm X-Pro1
Francis Peak Summer – Farmington, UT – Fujifilm X-Pro1
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Last Light on Brush – Antelope Island SP, UT – Fujifilm X-H1 – “Fujicolor Pro”
The Fuji X Weekly App is free, yet becoming a Fuji X Weekly App Patron unlocks the best App experience! One benefit of being a Patron is you get early access to some new Film Simulation Recipes. These Early-Access Recipes will eventually become available free to everyone in time, including this new one. In fact, many Early-Access Recipes have already been publicly published on this blog and the App, so now everyone can use them. Patrons help support Fuji X Weekly and, really, without them there would be no App. So I want to give a special “thank you” to all of the Patrons!
This “Fujicolor Pro” recipe is intended to produce a nice analog-like color-negative-film aesthetic with a classic Fujicolor palette. Those with cameras older than the X-Pro3 don’t have access to the Classic Negative film simulation, and there’s no substitute to mimic Classic Negative, so I wanted to create a next-best-thing recipe. While I didn’t attempt to mimic any specific film, I had Fujicolor Pro 160NS in my mind as I made this. There are already recipes for that film (here and here), and this recipe isn’t “better” than those two, but more of an alternative version that you might really like. I also had pulled-process Fujicolor Pro 400H on my mind (there’s also already a recipe for that); again I didn’t necessarily try to mimic that film and process specifically, but had the intention of producing a general Fujicolor Pro “memory color” (similar to what I did with my Nostalgic Color recipe). This “Fujicolor Pro” recipe is a good all-around option that works well in a variety of daylight situations.
Parking Garage – Salt Lake City, UT – Fujifilm X-H1 – “Fujicolor Pro”
This “Fujicolor Pro” Patron Early-Access Recipe is compatible with Fujifilm X-Trans III and X-T3 & X-T30 cameras. For those with newer X-Trans IV cameras, set Color Chrome FX Blue to Off, Clarity to 0, and I’d suggest Grain size Small.
If you are a Fuji X Weekly App Patron, it’s available to you right now on the App!
Example photographs, all camera-made JPEGs captured using this “Fujicolor Pro” Film Simulation Recipe on my Fujifilm X-H1:
Stairs Up – Salt Lake City, UT – Fujifilm X-H1
Main St. Market – Salt Lake City, UT – Fujifilm X-H1
Yellow Among Green – Salt Lake City, UT – Fujifilm X-H1
Frary Peak Sage – Antelope Island SP, UT – Fujifilm X-H1
Great Salt Lake Rocks – Antelope Island SP, UT – Fujifilm X-H1
Lake Between the Rocks – Antelope Island SP, UT – Fujifilm X-H1
Salt Lake From Antelope Island – Antelope Island SP, UT – Fujifilm X-H1
Island Brush – Antelope Island SP, UT – Fujifilm X-H1
Jetty – Antelope Island SP, UT – Fujifilm X-H1
Sunset Over Salt Lake – Antelope Island SP, UT – Fujifilm X-H1
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Inside City Creek – Salt Lake City, UT – Fujifilm X-T30 – “Kodacolor VR”
This Film Simulation Recipe was an experiment. I started out with my Fujicolor 100 Industrial recipe, but instead of using a cool White Balance with a warm White Balance Shift, I did the opposite: I used a warm White Balance with a cool shift. After many adjustments to various settings, this ended up not resembling the Fujicolor 100 Industrial recipe much at all, but it does have a great vintage print-film aesthetic that I really like.
I wasn’t sure at first which film this recipe most closely resembled (since it wasn’t intended to mimic any specific film), although it seemed to have some similarities to Kodacolor VR. I already have a Kodacolor recipe (plus a variant of it), which does a great job at mimicking Kodacolor VR; this recipe and that one look somewhat similar, but definitely different. Then I ran across some pictures that looked very similar to the ones you see in this article, and it turned out that they were shot on Kodacolor VR film that had expired. So I think this recipe, while it does resemble Kodacolor VR, as well as ColorPlus 200 (which is a direct descendant of that film), it most closely looks like Kodacolor VR that’s been stored a little past its expiration date. Of course, one film can have many different looks, depending on how it was shot, developed, scanned and/or printed, and (in this case) stored, so this recipe serves as a nice alternative to my original Kodacolor recipe.
Leaning Tower – Salt Lake City, UT – Fujifilm X-T30 – “Kodacolor VR”
This “Kodacolor VR” recipe was originally a Patron Early-Access Recipe, but is now available to everyone! If you are a Fuji X Weekly App Patron, there is a new Early-Access Recipe that replaced this one, so be sure to look for that. This recipe is compatible with Fujifilm X-Trans III and X-T3 and X-T30 cameras. For those with newer X-Trans IV cameras, set Color Chrome FX Blue to Off, Clarity to 0 (or perhaps -2), and I’d suggest Grain size Large, but use Small if you prefer.
Classic Chrome Dynamic Range: DR400 Highlight: -1 Shadow: +1 Color: +2 Sharpness: -1 Noise Reduction: -4 Grain: Weak Color Chrome Effect: Off White Balance: 10000K, -7 Red & +8 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured using this “Kodacolor VR” film simulation recipe on my Fujifilm X-T30:
Summer Reeds – Farmington, UT – Fujifilm X-T30
Corner Through Leaves – Salt Lake City, UT – Fujifilm X-T30
Stones & Glass Ceiling – Salt Lake City, UT – Fujifilm X-T30
Glass – Salt Lake City, UT – Fujifilm X-T30
Building a Building – Salt Lake City, UT – Fujifilm X-T30
Small Spaces Between – Salt Lake City, UT – Fujifilm X-T30
Twilight Telephone Poles – Salt Lake City, UT – Fujifilm X-T30
Stoneground – Salt Lake City, UT – Fujifilm X-T30
Goes for Gold – Salt Lake City, UT – Fujifilm X-T30
Night Parking – Salt Lake City, UT – Fujifilm X-T30
Doki Doki – Salt Lake City, UT – Fujifilm X-T30
Escalators – Salt Lake City, UT – Fujifilm X-T30
Downtown Buildings – Salt Lake City, UT – Fujifilm X-T30
Coming Train – Salt Lake City, UT – Fujifilm X-T30
Trax – Salt Lake City, UT – Fujifilm X-T30
Waiting on the Platform – Salt Lake City, UT – Fujifilm X-T30
Glass & Sky – Salt Lake City, UT – Fujifilm X-T30
Tall Downtown Buildings – Salt Lake City, UT – Fujifilm X-T30
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Of the different faux filter options for Acros, +Y is the one I use the least. I think it goes back to my film days when I used color filters with B&W film. I would select Orange or Red before Yellow, because Yellow is fairly subtle, but the advantage of the Yellow filter is that it doesn’t block as much light. Of course, the faux filters on Fujifilm cameras don’t affect the exposure like real filters with film. Anyway, recognizing that I infrequently use Acros+Y, I set out to make a Film Simulation Recipe that uses +Y and produces an aesthetic that I like. I think it is important to challenge myself sometimes, so if there’s some setting or gear or option that I don’t use often, forcing myself to use it helps me to grow as a photographer. That’s why I made this recipe.
I wanted something with an overall darker curve, so that it would produce a moody look. Maybe deep blacks reminiscent of Tri-X, and maybe a push-process feel. I didn’t have any specific film in mind, but I’m reminded of this time that I push-processed a roll of Ilford Delta 400, but inadvertently got it wrong—I underexposed two stops, and only had the lab push it by one stop, so the pictures were largely underexposed, and they were darker and moodier (yet less contrasty and grainy) than I had intended. This isn’t exactly the same as that, but not too dissimilar, either, so that’s why I call this recipe Moody Monochrome.
Early Blossoms – Farmington, UT – Fujifilm X100V – “Moody Monochrome”
Because this film simulation recipe uses Clarity, it is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. If you have an X-T3 or X-T30 or X-Trans III camera, ignore Clarity and Grain size, and use a diffusion filter, like a 10% CineBloom or 1/4 Black Pro Mist, to get similar results.
Acros+Y Dynamic Range: DR400 Highlight: -1 Shadow: +4 Noise Reduction: -4 Sharpness: -2 Clarity: -3 Grain Effect: Strong, Large Color Chrome Effect: Off Color Chrome Effect Blue: Off White Balance: Fluorescent 3, -4 Red & -9 Blue ISO: 3200 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this “Moody Monochrome” Film Simulation Recipe on my Fujifilm X100V:
Stop West – Farmington, UT – Fujifilm X100V
Watch For Falling Bikes – Farmington, UT – Fujifilm X100V
Sun Beams – Layton, UT – Fujifilm X100V
Tower in the Middle of Nowhere – Layton, UT – Fujifilm X100V
Path Through The Grass – Layton, UT – Fujifilm X100V
Wetland Boardwalk – Layton, UT – Fujifilm X100V
Wetland Grass – Layton, UT – Fujifilm X100V
Creek in the Trees – Farmington, UT – Fujifilm X100V
Creek, Stick & Vines – Farmington, UT – Fujifilm X100V
Log Above The Water – Farmington, UT – Fujifilm X100V
Grey Brush – Farmington, UT – Fujifilm X100V
Cat on a Log – Farmington, UT – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
A couple days ago Serr (Instagram, YouTube) dropped an incredible video, called Fujifilm Film Simulation Recipes that will make you stop shooting RAW II. If you haven’t seen it, I included it above—I promise that it’s worth your time and you won’t be disappointed. I was blown away by it! Serr has some impressive video and photography skills, and they’re on full display in this feature. In other words, stop what you’re doing and watch it right now!
The Film Simulation Recipes mentioned in the video are:
As you probably know, I have published over 200 Film Simulation Recipes for Fujifilm cameras—it’s fast approaching 250! There are so many looks that you can achieve straight-out-of-camera no matter your Fujifilm model. But I’m not the only one who has created recipes, and maybe you’re after some look that I haven’t yet published, so I thought I’d compile a list of websites where you can find more recipes. Using Google, I was shocked by what I found: so many people have published recipes! I’m sure my list below is not exhaustive—if you know of something I’ve missed, feel free to leave it in the comments. It’s really quite amazing what’s out there!
If you have the Fuji X Weekly App on your phone and are an App Patron, you can use the Blank Recipe Cards feature to add any recipe that you find to the App so that you can always have it with you. Or if you’ve created your own recipe, you can add it into the App. Or if there’s a recipe that you’ve modified in some way and want to keep track of that modification, you can use it for that purpose, too.
Anyway, below are various websites that I found that have Film Simulation Recipes for Fujifilm cameras. Take a look!
This new version of the recipe isn’t intended to more accurately replicate the film, but instead offer a nice-looking alternative that still retains a vintage Kodak essence. It has a “memory color” that is reminiscent of classic Kodak slide film. I especially like how this recipe renders blues.
Tetons in March – Grand Teton NP, WY – Fujifilm X100V – “Kodak Brilliance”
Because the Kodak Brilliance recipe uses Clarity and Color Chrome FX Blue, it’s only compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. I believe that you could also use it on newer GFX cameras, although I have not personally tested it. For the X-T3 and X-T30, feel free to try it, ignoring Clarity, Color Chrome FX Blue, and Grain size—it won’t look exactly the same, but will be pretty similar.
Classic Chrome Dynamic Range: DR200 Highlight: +4 Shadow: -2 Color: +4 Noise Reduction: -4 Sharpness: -1 Clarity: +2 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Daylight, +2 Red & -1 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: -1 to 0 (typically)
Example photographs, all camera-made JPEGs using this “Kodak Brilliance” Film Simulation Recipe on my Fujifilm X100V and Fujifilm X-E4:
On the Cusp of Spring – Hammond, OR – Fujifilm X-E4
Wet Fern – Columbia River Gorge, OR – Fujifilm X100V
Hanging Orange – Hammond, OR – Fujifilm X-E4
Blowing East – Hammond, OR – Fujifilm X-E4
Beach Staircase – Cannon Beach, OR – Fujifilm X-E4
Misty Ocean – Cannon Beach, OR – Fujifilm X-E4
Haystack Rock – Cannon Beach, OR – Fujifilm X-E4
Helicopter Behind Haystack Rock – Cannon Beach, OR – Fujifilm X-E4
Shipwreck Shell – Fort Stevens SP, OR – Fujifilm X100V
Peter Iredale at Sunset – Fort Stevens SP, UT – Fujifilm X100V
Season 2 of SOOC kicked off this morning! You can watch it (above) if you missed it. It was a really good show full of fun and surprises, so you’ll want to hit play. In our usual fashion, the broadcast went a little long, but I hope you find it well worth your time.
For those who don’t know, SOOC is a monthly live video series, with each episode focused on a different Film Simulation Recipe. It is a collaboration between Tame Your Fujifilm (Fujifilm X-Photographer Nathalie Boucry) and Fuji X Weekly (Ritchie Roesch). SOOC is a fun and educational experience where we not only talk about Fujifilm camera settings, but also answer your questions and give tips and tricks. Basically, we’re trying to help you master your Fujifilm camera, with a focus on simplifying your photographic workflow.
In Episode 01 of Season 02, among other things, we conclude our discussion (from Season 01) of the Kodak Gold 200 Film Simulation Recipe, and introduce the next recipe-of-the-month: Kodak Tri-X 400. We had a special guest, Anders Lindborg—it was fun talking shop with him, and seeing his wonderful photographs. Thanks, Anders, for joining us live! To submit pictures captured with the Kodak Tri-X 400 Film Simulation Recipe for Episode 02, click here.
Something else to note: we had our first Pre-Show, that was a more informal experience. You can watch it (above) if you missed it. The Pre-Show will be a regular feature, so if you have a few minutes before a broadcast, be sure to join in!
Thank you to everyone who watched, to everyone who participated, and for all who submitted pictures. You all are the best! Episode 02, where we’ll conclude Kodak Tri-X 400 and introduce the next recipe-of-the-month (Kodak Vision3 250D), will be April 14th, so mark your calendars now! See you then!
Anders sent me a lengthy note on his process to create this recipe, and I want to share with you a short snippet just so you get an idea of the effort put into this. “I checked the spectrum sensitivity chart and looked for any significant bumps in the wavelengths,” he wrote. “For the largest bump, I checked what color it represents to try to match it as close as possible with the white balance shift. This recreated the bump in the recipe to make the simulation a bit extra sensitive to that specific color.” This was point four of seven in his process, and shows the kind of effort that can go into creating Film Simulation Recipes.
Specifically about this recipe, Anders noted, “Middle gray is the game here. Soft highlights and things disappearing into deep dark shadows, but never as black as Tri-X. Great for all day shooting in just about any weather. Looks totally awesome on winter shots!” I can add that it looks great on both sunny days and rainy days, too. I think it does especially well in moderate and high contrast situations.
Footbridge & Falls – Multnomah Falls, OR – Fujifilm X100V – “Ilford HP5 Plus 400”
Ilford began the Hypersensitive Panchromatic (HP) series in 1931. HP5 Plus 400 is the latest version, released in 1989, and still available today. This is a classic black-and-white film stock that has stood the test of time, and Anders did a great job mimicking it on Fujifilm cameras. This recipe is intended for use on the X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras; however, for the X-T3 and X-T30, as well as X-Trans III cameras, simply ignore Grain size, and this recipe is compatible with those cameras, so anyone with an X-Trans III or IV camera can use this.
A side note: this recipe is different than my old Ilford HP5 Plus and Ilford HP5 Push Process recipes, which I still quite like, and are both excellent in low and mid contrast situations. Try those or Anders’ version—or all three if you are feeling adventurous!
Monochrome Dynamic Range: DR400 Highlight: -1 Shadow: +1 Noise Reduction: -4 Sharpness: -2 Clarity: 0 Grain Effect: Strong, Large Color Chrome Effect: Off Color Chrome Effect Blue: Off White Balance: Daylight, +1 Red & -8 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: -2/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Ilford HP5 Plus 400” Film Simulation Recipe on my Fujifilm X100V:
Horsetail Falls From Bridge – Columbia River Gorge, OR – Fujifilm X100V
Horsetail Falls – Columbia River Gorge, OR – Fujifilm X100V
Upper Falls – Multnomah Falls, OR – Fujifilm X100V
36 CFR 261.53(e) – Multnomah Falls, OR – Fujifilm X100V
Use Caution For Slipping Bandits – Multnomah Falls, OR – Fujifilm X100V
No Cars – Astoria, OR – Fujifilm X100V
Two Elk in a Yard – Warrenton, OR – Fujifilm X100V
Spiral Stairs – Fort Stevens SP, OR – Fujifilm X100V
Old Fireplace – Fort Stevens SP, OR – Fujifilm X100V
Stairs in the Forest – Fort Stevens SP, OR – Fujifilm X100V
Astoria & Columbia River – Astoria, OR – Fujifilm X100V
Two Ships in the Columbia River – Astoria, OR – Fujifilm X100V
Tetons, As Seen By Oneskies – Grand Teton NP, WY – Fujifilm X100V
South Jetty – Fort Stevens SP, OR – Fujifilm X100V
Pointing To The Pacific – Cannon Beach, OR – Fujifilm X100V
Haystack Sticks – Cannon Beach, OR – Fujifilm X100V
Season 2 of SOOC kicks off this Thursday, March 24th, at 10 AM Pacific Time, 1 PM Eastern. That’s tomorrow!
SOOC is a monthly live video series, with each episode focused on a different film simulation recipe. It is a collaboration between Tame Your Fujifilm (Fujifilm X-Photographer Nathalie Boucry) and Fuji X Weekly (Ritchie Roesch). SOOC is a fun and educational experience where we not only talk about Fujifilm camera settings, but also answer your questions and give tips and tricks. Basically, we’re trying to help you master your Fujifilm camera, with a focus on simplifying your photographic workflow. It’s an interactive show, and your participation is essential, so I really hope to see you there!
This episode will conclude our discussion of the Kodak Gold 200 Film Simulation Recipe, and introduce the next recipe-of-the-month: Kodak Tri-X 400. It will be a great time, with wonderful photographs and discussions. You won’t want to miss it!
Also, there will be a 30-minute pre-show that I invite you to join. So if you have a little time before the show, even if it’s only five or ten minutes, please tune in as we showcase some of your pictures and have an informal chat with the audience.
If you are searching for a good blue-hour and nighttime Film Simulation Recipe, this is one you should try! I used it recently in Jackson Hole, Wyoming, and Astoria, Oregon, and was impressed with the results. I invite you, if you will be photographing after dark anytime soon, to give this recipe a try—you’ll be glad that you did! I suspect that this will become a favorite recipe for some of you.
Night Statue – Jackson Hole, WY – Fujifilm X100V – “Serr’s 500T”
This recipe is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. For those with an X-T3 or X-T30, you can use this recipe but you’ll have to ignore Grain size and Color Chrome FX Blue—the results will be slightly different, but pretty close. Those with X-Trans III cameras will additionally have to ignore Color Chrome Effect. Because Clarity is set to 0 in this recipe, I used a 5% CineBloom filter on my X100V for these pictures—alternatively, you could set Clarity to -2 and get similar results.
Classic Chrome Dynamic Range: DR-Auto Highlight: -2 Shadow: -1 Color: -1 Noise Reduction: -2 Sharpness: -1 Clarity: 0 Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: 3200K, -1 Red & +4 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: -1/3 to +1/3 (typically)
Example photographs, all camera-made JPEGs using “Serr’s 500T” Film Simulation Recipe on my Fujifilm X100V:
Dairy Maid – Warrenton, OR – Fujifilm X100V
Cold Nights – Jackson Hole, WY – Fujifilm X100V
Magic Fork – Astoria, OR – Fujifilm X100V
Salmon – Astoria, OR – Fujifilm X100V
Walking Tadziu – Jackson Hole, WY – Fujifilm X100V
Sun Behind The Tetons – Grand Teton NP, WY – Fujifilm X100V – “Elite Chrome 200“
Sun Behind Tetons & River – Grand Teton NP, WY – iPhone 11 – RitchieCam – “Color Negative Low”
I recently visited the Grand Teton National Park in Wyoming. This iconic mountain range sits just north of the tourist town of Jackson Hole. If you’ve never been, this is a “bucket list” kind of place that you should absolutely try to see in person if you can. My visit was a quick weekend getaway, and not surprisingly the weather didn’t really cooperate. Still, I wanted to get in some photography, and so I did.
What I don’t want to do is view massive crops side-by-side. The Fujifilm X100V and the iPhone are much different tools, so this will be a very general overview without pixel-peeping.
Technically speaking, the X100V is far superior, and it isn’t even close. For technical image quality, the X100V is the camera to grab, but the iPhone, with its tiny little sensor, is surprisingly good, all things considered. The advantage of the iPhone is that you have it with you all of the time, and you can quickly and easily share the pictures captured with it across the world (especially if you used the RitchieCam app). Convenience and speed are the reasons to choose the iPhone over the X100V, but the X100V is pretty compact and quick, too. For printing or viewing large, the X100V is the right tool. For quick sharing, the iPhone is the right tool. Here’s the great news: you don’t have to choose—use both, or use the one that you happen to have with you.
This is the first in a series of articles where I’ll compare photographs captured with the Fujifilm X100V using Film Simulation Recipes and the iPhone using the RitchieCam app. Below are photographs captured with these cameras at the Grand Tetons in Wyoming. Let me know in the comments which pictures you like best!
Fujifilm X100V
Snake River Overlook Morning – Grand Teton NP, WY – Fujifilm X100V – “The Rockwell“
Fujifilm sent me an X-Pro3 to try for a few weeks. I put it through its paces as best as I could in that short time, and wanted to publish a review; however, what fresh insight can I give that hasn’t already been said over and over? Instead of rehashing all the technical data you probably already have known for awhile, I thought I’d simply answer this question: Is the Fujifilm X-Pro3 still a camera worth buying in 2022? And, is this a camera that you should consider?
The X-Pro3 was originally released in November of 2019, which was more than two years ago. In the digital era, a lot of people “upgrade” their gear every two-ish years, so does that mean the X-Pro3 is beginning to feel dated? Will it seem old even though you bought it brand-new? Will the X-Pro4 be announced the day after your X-Pro3 arrives in the mail?
Fujifilm sent me a well-used X-Pro3, but it was still in great shape. The majority of the reviews you find on the internet were probably from this exact same body. I won’t say that I got it last, but more-or-less that’s true.
It’s still a very similar size, weight, shape, and design as the original X-Pro1—Fujifilm didn’t change much externally over the last decade, but what they did change has certainly caused a lot of controversy. The headline change, of course, is the backwards-mounted rear screen, which forces you to use the hybrid-viewfinder for most of your photography, and only use the rear LCD when you absolutely have to. While I thought I’d love this, I think the execution was lacking, and I found it frustrating at times. Instead of folding down, I think flipping out to the side, and then twisting up or down, would have made a lot more sense. I think removing the D-Pad was a bit of a mistake, too.
Image quality on the X-Pro3 is fantastic—exactly the same as the X100V, X-T4, and the other X-Trans IV cameras. Unfortunately, and despite this being a “premium” model, Fujifilm hasn’t given this camera the Kaizen love that it deserves, and you won’t find Eterna Bleach Bypass, half-step Highlight and Shadow adjustments, or the two new Auto White Balance options. This is a real shame, because otherwise it would feel just as up-to-date as the latest models, but instead it has a sense of being slightly dated. The X-E4, the current entry-level model, has more JPEG options than the X-Pro3, and that just doesn’t seem right to me.
Enough of the negativity, though, because the X-Pro3 is an awesome camera! I thoroughly enjoyed using it. It is such a beautiful model, and is just as beautiful on the inside as it is on the outside. I can’t imagine anyone hating it. Yeah, it has a couple disappointing design choices, but if you are aware of those things going into the purchase, you won’t be disappointed. Best-looking body combined with Fujifilm’s fantastic film simulations is a winner in my books!
February Reaching – Farmington, UT – Fujifilm X-Pro3 – “Vintage Color v2”
Here’s something that maybe hasn’t been talked about much: the ability to save TIFFs. Most Fujifilm models can either do RAW or JPEG (or RAW+JPEG), but you have an additional option of TIFF on the X-Pro3. I didn’t notice any image quality difference between TIFF and JPEG, but the TIFF should allow you more room for editing before the files start to degrade. There’s also the potential that the TIFFs, having more bits, do actually deliver an improved image quality, but if so it is really subtle and I couldn’t tell.
The X-Pro3, though, isn’t a practical purchase—it’s emotional. The rational side of your brain will tell you that the X-T4 is slightly better and slightly cheaper. The rational side of your brain will tell you that the X-E4 is much cheaper, smaller, and lighter, yet basically the same thing, and since you rarely shoot in the rain you don’t really need weather-sealing anyway. But the emotional side tells you that those cameras aren’t as timeless as the X-Pro line. The X-Pro3 is a beast that you’ll keep and use and love for ages. It’s your Leica, except that it’s Fujifilm.
Mutual Conversation – Salt Lake City, UT – Fujifilm X-Pro3 – “Agfa Ultra 100”
On a more serious note, though, the X-Pro3 is a solid body that balances well with larger lenses. Sometimes, on my smaller cameras, my bigger and heavier lenses are a bit awkward to use, but not on the X-Pro3. If you often use these larger and heavier lenses, you might appreciate the larger, sturdier body of the X-Pro3.
While X-Trans V is just around the corner, I don’t believe that the X-Pro4 is going to be announced anytime soon—I think maybe in 2023, but I’d be pretty shocked if Fujifilm replaced the X-Pro3 anytime this year. I’ve certainly been wrong before, but I haven’t heard anything about an upcoming X-Pro4 on the horizon.
I think by-and-large those who would love the X-Pro3 know who they are already. If you are uncertain, that’s a pretty good indication that this camera isn’t for you. That’s not to say you’d dislike it, but you should strongly consider a different model instead. For those who are pretty confident that the X-Pro3 is the camera for them, you can know that you are probably right, and you’re going to love it. So, my conclusion is that the X-Pro3 isn’t perfect and it isn’t for everyone, but for some it will be a much appreciated, much loved, and much used camera for years to come.
I was sad to send Fujifilm their X-Pro3 back, and I’ll certainly miss it.
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
SOOC was postponed two weeks, and I know many of you set aside time today to tune in, so I thought I’d fill the void by sharing some recent YouTube videos that show or discuss Film Simulation Recipes. I hope that you find these videos interesting or entertaining. If you do appreciate a certain video, give the creator a “thumbs-up” and follow to let them know!
I was asked to recreate the aesthetic from a frame of a classic movie. I don’t know which movie, but only that it was shot on “Eastmancolor” film, which is a brandname for many different motion picture films and processes going back to the 1950’s. In fact, Eastmancolor Negative, better known as ECN, is still the development process used for today’s motion picture film. It’s unknown which film was used for the frame I was shown, but I did my best to recreate it on a Fujifilm X-Pro3.
After using these settings for several days, I decided that it really reminds me of old Ektachrome color reversal film, perhaps from the 1970’s. Ektachrome was known for fading rather quickly, with some color shifts if not stored well. Aside from some faded slides from my grandparents, most of the Ektachrome I’ve seen from this era have been in classic photography magazines. I don’t know how faithfully this recipe mimics old Ektachrome film, but it definitely has the right “memory color” for me. I hope that you like it, too.
Abandoned Ferris Wheel – Salt Lake City, UT – Fujifilm X-Pro3 – “Old Ektachrome”
This “Old Ektachrome” film simulation recipe is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. This recipe isn’t compatible with the X-T3 or X-T30, but if you disregard Color Chrome FX Blue, disregard Grain size, and use a diffusion filter in lieu of Clarity, you’ll get similar results.
Classic Chrome Dynamic Range: DR400 Highlight: +2 Shadow: +1 Color: +3 Noise Reduction: -4 Sharpness: 0 Clarity: -4 Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Daylight, +3 Red & +2 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Old Ektachrome” film simulation recipe on a Fujifilm X-Pro3:
Blue Roof – Salt Lake City, UT – Fujifilm X-Pro3
Old Carnaval Ride – Salt Lake City, UT – Fujifilm X-Pro3
Too Late To Ride – Salt Lake City, UT – Fujifilm X-Pro3
Early Blossoms – Salt Lake City, UT – Fujifilm X-Pro3
Potted Plant – Salt Lake City, UT – Fujifilm X-Pro3
Desert Snow – Canyonlands NP, UT – Fujifilm X-Pro3
Rock & Half Arch – Arches NP, UT – Fujifilm X-Pro3
Cave & Juniper – Arches NP, UT – Fujifilm X-Pro3
Snow in the Desert – Arches NP, UT – Fujifilm X-Pro3
Sign Stickers – Canyonlands NP, UT – Fujifilm X-Pro3
Red Rock Tree – Canyonlands NP, UT – Fujifilm X-Pro3
View Through Mesa Arch – Canyonlands NP, UT – Fujifilm X-Pro3
Fading Light On Wasatch – Farmington, UT – Fujifilm X-H1 – “Improved Velvia”
This Film Simulation Recipe is the second in a series, in which I attempt to customize each film simulation to optimize the aesthetic that Fujifilm intended. In other words, make a nice-looking recipe that is similar to yet better than the stock look of a film simulation. The first recipe in this series was Standard Provia, and this new one is called Improved Velvia.
I used to be frustrated by the Velvia film simulation because it’s not like Velvia 50. When people talk about Velvia film, that’s the emulsion that they most commonly mean, with it’s exaggerated super-vivid colors, but Velvia 50 is not the only Velvia film. You see, Velvia 50 was a “mistake” emulsion that landscape photographers fell in love with. I shot plenty of Velvia 50 back in the day, and it was one of my absolute favorite films. But Fujifilm was frustrated by it because it wasn’t what they wanted it to be. In 2003 Fujifilm “improved” Velvia and finally “fixed” their mistake—they made Velvia look like how they thought it should have from the beginning. This emulsion was called Velvia 100F and was duller than Velvia 50 (or Velvia 100, which came out in 2005)—it lacked the classic Velvia pop, but was better for pictures of people. One of the guys who worked on Velvia 100F also worked on the Velvia film simulation. It’s no surprise, then, that the Velvia film simulation is closer to Velvia 100F film than Velvia 50. Understanding this made me better realize the intention of—and better appreciate—the film simulation. I no longer find Velvia to be frustrating, and I think even default Velvia looks pretty good.
For this recipe, I didn’t want mimic Velvia 50, so I didn’t want to mess with the settings very much. I have other Velvia recipes that I quite like (here, here, & here), and those could very easily “stand-in” for this. I felt like a subtly-different option is what was needed. This recipe is compatible with X-Trans III models, plus the X-T3 and X-T30. For newer X-Trans IV, consider setting Color Chrome Effect and Color Chrome FX Blue to Off, Grain to Weak Small, and Clarity to 0.
Velvia Dynamic Range: DR200 Highlight: -1 Shadow: 0 Color: +1 Sharpness: 0 Noise Reduction: -4 Grain: Weak White Balance: Auto, -1 Red & -2 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs captured using this “Improved Velvia” film simulation recipe on my Fujifilm X-H1:
Reflection in Lake – Farmington, UT – Fujifilm X-H1
Wall & Reeds – Farmington, UT – Fujifilm X-H1
Net Fish – Farmington, UT – Fujifilm X-H1
Not Wanting A Picture – Farmington, UT – Fujifilm X-H1
Pelican – Farmington, UT – Fujifilm X-H1
Yellow Sky Sunset – Farmington, UT – Fujifilm X-H1
Soft Sunset Light on Francis Peak – Farmington, UT – Fujifilm X-H1
Sunset Sky & Water – Farmington, UT – Fujifilm X-H1
Reed Sunset – Farmington, UT – Fujifilm X-H1
Marsh Sunset – Farmington, UT – Fujifilm X-H1
Comparison:
“Improved Velvia”
“Default Velvia”
The top image (above) is this recipe, while the bottom image (above) is Velvia with everything set to 0 or Off, except for Dynamic Range, which was DR200, and Noise Reduction, which was -4. The White Balance was Auto 0R & 0B. You can see that both images are quite similar. My recipe is slightly more vibrant, has a little more yellow and slightly less red, and protects highlights a tad more. I also added a little Grain to my recipe to give it a more film-like appearance. Overall, though, the differences are fairly subtle.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
I want to give a big “Thank You” to everyone who tuned into Episode 06 of SOOC, a collaboration between myself and Fuji X-Photographer Nathalie Boucry. This video series is live and interactive, so I’m especially grateful to all who participated! You are the ones who make these episodes great! Sorry that it took so long to get this video published, and I appreciate your patience.
In the video above are the viewers’ photographs, captured using the Cross Process film simulation recipe, that were shown during the show. It’s a short clip, so be sure to watch! I love seeing your pictures, and I’m honored that you submitted them for us to view.
The SOOC “recipe of the month” is Kodak Gold 200. Shoot with that recipe, and upload your pictures here to be featured in the next video! Season 02 Episode 01 will be on March 10 at 9 AM Pacific, 12 PM Eastern, so mark your calendars, and I look forward to seeing you then!
Clearing Clouds Over Winter Ridge – Farmington, UT – Fujifilm X-Pro3 – “Standard Provia”
This Film Simulation Recipe is the first in what will be a series, which will encompass several Fujifilm generations (not just X-Trans IV). I’m not exactly sure how many recipes will be in this series, but the intention is at least one for each film simulation offered by Fujifilm. This first recipe is compatible with X-Trans IV because Fujifilm sent me an X-Pro3 to try, and I have to return it soon, so I’m using it as much as practical so that I can write a review. The intention of this series is to customize each film simulation to optimization the aesthetic that Fujifilm intended. In other words, make a nice-looking recipe that is similar to yet better than the stock look of a film simulation. This first recipe, which I’ve titled simply Standard Provia, is my optimization of the Provia film simulation.
The Provia film simulation is not a facsimile of Provia slide film. I think Fujifilm just wanted to use the brandname for their “standard” colors, but there’s quite a divergence between the film simulation and the film. This recipe isn’t intended to mimic the film, but simply produce good results with the Provia film simulation (without modifying the overall aesthetic too much). The Provia film simulation is one of my least utilized, but I do believe this recipe makes good use of it.
Backlit Ivy – Farmington, UT – Fujifilm X-Pro3 “Standard Provia”
Because this recipe uses Clarity and Color Chrome FX Blue, it is only compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. If you have an X-T3 or X-T30, you could replace Clarity with a diffusion filter and ignore Color Chrome FX Blue and Grain size, and get similar results that will be just a little different.
Provia Dynamic Range: DR400 Highlight: +2 Shadow: +1 Color: +2 Noise Reduction: -4 Sharpening: 0 Clarity: -3 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Daylight, -3 Red & 0 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Standard Provia” film simulation recipe on a Fujifilm X-Pro3:
Orange Traffic Barrier – Salt Lake City, UT – Fujifilm X-Pro3
Vape On Main – Salt Lake City, UT – Fujifilm X-Pro3
Small Table Decor – Farmington, UT – Fujifilm X-Pro3
Abandoned Ice Chest – Farmington, UT – Fujifilm X-Pro3
End Post – Farmington, UT – Fujifilm X-Pro3
Hanging Around – Farmington, UT – Fujifilm X-Pro3
Blackberry Leaf in February – Farmington, UT – Fujifilm X-Pro3
Crossing With Falling Snow – Farmington, UT – Fujifilm X-Pro3
Cautious Dirt – Farmington, UT – Fujifilm X-Pro3
Winter Storm over Wasatch – Farmington, UT – Fujifilm X-Pro3
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Mutual Conversation – Salt Lake City, UT – Fujifilm X-Pro3 – “Agfa Ultra 100”
Agfa Ultra 100 was a short lived film—introduced in 2003 and discontinued in 2005, although it was still available for a few years after—and was Agfa’s most vibrant color negative film. I’ve been attempting to mimic this film for a little while now (ever since I published the AgfaChrome RS 100 recipe last summer), but I couldn’t get it right. This Agfa Ultra 100 recipe actually has some similarities to the AgfaChrome RS 100 recipe, and (for this particular attempt) I used that recipe as the starting point. I never used this film, so I relied on online references and a couple pictures I found in an old magazine article as samples.
I’m actually not fully satisfied with this recipe. I think sometimes it’s pretty spot-on, and I think other times it is significantly off. Of course, one film can have several different aesthetics depending on how it was shot, developed, scanned and/or printed, and viewed, so perhaps that accounts for some of it. I think an argument can be made that Color should be +3 or even +4, but I also feel that sometimes that’s too much and +2 is just right. I think green is the least correct color, and if you do have a lot of green in the shot, you might consider increasing Color to +3 or +4 for a more accurate facsimile, although you might find reds and blues are rendered too strong if you do that.
Urban Sunstar – Salt Lake City, UT – Fujifilm X-Pro3 – “Agfa Ultra 100”
Because this recipe uses Classic Negative, Clarity, and Color Chrome FX Blue, this Agfa Ultra 100 film simulation recipe is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras.
Classic Negative Dynamic Range: DR400 Highlight: +2 Shadow: -2 Color: +2 Noise Reduction: -4 Sharpness: -1 Clarity: -3 Grain Effect: Weak, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Daylight, -2 Red & +3 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +1 (typically)
Example photographs captured using this “Agfa Ultra 100” film simulation recipe on a Fujifilm X-Pro3:
Red – Salt Lake City, UT – Fujifilm X-Pro3
Blu – Salt Lake City, UT – Fujifilm X-Pro3
Orange – Salt Lake City, UT – Fujifilm X-Pro3
Walker Reflected – Salt Lake City, UT – Fujifilm X-Pro3
Common Signs – Salt Lake City, UT – Fujifilm X-Pro3
Pitched In Street Sign – Salt Lake City, UT – Fujifilm X-Pro3
Elevator – Salt Lake City, UT – Fujifilm X-Pro3
Street Crossing – Salt Lake City, UT – Fujifilm X-Pro3
Sidewalk Seat Shadow – Salt Lake City, UT – Fujifilm X-Pro3
Blue Boxes – Salt Lake City, UT – Fujifilm X-Pro3
Urban Congo – Salt Lake City, UT – Fujifilm X-Pro3
Sidewalk Closed In 150 Feet or Less – Salt Lake City, UT – Fujifilm X-Pro3
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
February Reaching – Farmington, UT – Fujifilm X-Pro3 – “Vintage Color v2”
This “Vintage Color v2” recipe is a modification of the original Vintage Color Film Simulation Recipe. In the comments, Thomas Schumacher suggested using Classic Negative instead of Eterna. Sometimes when you try a different film simulation than what the recipe calls for, you discover interesting results. Well, I gave it a try and loved the results; however, I made a couple more modifications. Because Classic Negative has a lot more contrast built into it than Eterna, I chose DR400 (instead of DR200) to help prevent clipped highlights. Classic Negative also has more saturation than Eterna, so I set Color to -1 (instead of +1). I also changed Clarity to -3 (instead of -2) just to soften it a tad. The results produced by this “Vintage Color v2” recipe can be absolutely fantastic!
This recipe has almost two different looks, depending on the exposure. You can reduce exposure a little—go almost low-key—and get a wonderfully moody feel. You can also increase exposure a little—go almost high-key—and achieve something somewhat similar to overexposed Fujicolor Pro 400H. You can get beautiful pictures either way. Or split the difference and still get excellent results.
Pillars – Salt Lake City, UT – Fujifilm X-Pro3 – “Vintage Color v2”
This “Vintage Color v2” recipe is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. As a reminder, Clarity causes the camera to pause for a moment after each shot. I use the pause to slow myself down, but if you need to be quick, and if you shoot RAW+JPEG, you can always set Clarity to 0, and add it later by reprocessing the RAW file in-camera.
Classic Negative Dynamic Range: DR400 Highlight: +2 Shadow: +3 Color: -1 Noise Reduction: -4 Sharpness: -2 Clarity: -3 Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: 7350K, -1 Red & -4 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +1 (typically)
Example photographs captured using this “Vintage Color v2” film simulation recipe on a Fujifilm X-Pro3:
High Rise & Moon – Salt Lake City, UT – Fujifilm X-Pro3
KeyBank – Salt Lake City, UT – Fujifilm X-Pro3
Bronze Building – Salt Lake City, UT – Fujifilm X-Pro3
Bank Above Macy’s – Salt Lake City, UT – Fujifilm X-Pro3
Boy With Nerf Gun – Farmington, UT – Fujifilm X-Pro3
Fake Succulent on Table – Farmington, UT – Fujifilm X-Pro3
House At Last Light – Farmington, UT – Fujifilm X-Pro3
Winter Bloom Remnants – Farmington, UT – Fujifilm X-Pro3
Frozen Pond near Sunset – Farmington, UT – Fujifilm X-Pro3
Grass & Frozen Waterway – Farmington, UT – Fujifilm X-Pro3
Wild Gold – Farmington, UT – Fujifilm X-Pro3
Backlit Marsh Reed – Farmington, UT – Fujifilm X-Pro3
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
