November Tree – Farmington, UT – Fujifilm X100V – “Fujicolor Negative”
Fuji X Weekly Patrons have had early access to this Fujicolor Negative film simulation recipe since the launch of the Fuji X Weekly app, but now it is available to all! What film does this recipe resemble? I’m not completely certain. I was messing around with the settings and stumbled upon something that I liked, which means that this recipe wasn’t intended to mimic any specific film; however, I think it’s kind of similar to Fujicolor F-II or Fujicolor Super G, but it’s not really like either. It does have a vintage Fujicolor vibe thanks to the Classic Negative film simulation that it uses as its base. Whatever film this recipe might or might not resemble, it looks beautiful!
I really enjoy using this recipe—it just produces good results that have a film-like quality. It has good contrast and natural or perhaps somewhat muted colors. This could be my go-to settings for everyday photography—that is, if I wasn’t constantly creating new recipes!
Coming Out of the Shadows – Layton, UT – Fujifilm X100V – “Fujicolor Negative”
This Fujicolor Negative film simulation recipe is only compatible (as of this writing) with the Fujifilm X-Pro3, X100V, X-T4, X-S10 and X-E4 because it uses Classic Negative and Clarity. If you have a GFX camera like GFX-50S that has Classic Negative but doesn’t have Clarity, give this recipe a try anyway—it won’t be exactly the same but should be pretty darn close.
Classic Negative Dynamic Range: DR400 Highlight: -2 Shadow: +3 Color: -4 Noise Reduction: -4 Sharpening: -2 Clarity: -3 Grain Effect: Strong, Small Color Chrome Effect: Off Color Chrome Effect Blue: Off White Balance: Auto, -1 Red & -6 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +2/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this Fujicolor Negative film simulation recipe on my Fujifilm X100V:
Winter Berries – Farmington, UT – Fujifilm X100V
Small Stop Sign – Farmington, UT – Fujifilm X100V
Waste Management – Farmington, UT – Fujifilm X100V
Pile of Pots – Farmington, UT – Fujifilm X100V
Spilled Sakrete – Farmington, UT – Fujifilm X100V
Framed – Farmington, UT – Fujifilm X100V
Reserved Rose – Farmington, UT – Fujifilm X100V
Oh Deer – Farmington, UT – Fujifilm X100V
Book of Film – Farmington, UT – Fujifilm X100V
Succulent Shelf– Farmington, UT – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Those recipes in the app are the same ones that you know and love from this website, but now take them with you on the go, and have them at your fingertips wherever you are! I made most of the recipes myself, which you can imagine takes a lot of time and work. There are some recipes that were created by others—fans of this website—and I always ask for and receive permission before publishing; plus several recipes that were a collaborative effort between myself and others. With all of these recipes, there are a whole lot of different picture aesthetics that you can get straight out of your Fujifilm camera. There’s nothing like this with any other camera brand!
Really, though, the app is just the beginning. There are so many great things that are in the works right now! I wish that I could share them with you, but I’m keeping it all under wraps until they’re closer to being ready. It takes time, and there are plenty roadblocks that I could encounter. I don’t want to overpromise and underdeliver. What I can say is that these things wouldn’t be possible without the support of Fuji X Weekly Patrons. Yes, becoming a Fuji X Weekly Patron unlocks advanced features on the Fuji X Weekly — Film Recipes App and gives you the best app experience, but what it really does is allow these great things that are in the works to become reality. Without the Fuji X Weekly Patrons these things wouldn’t happen, so let me give a big “Thank you!” to all the Patrons! Hopefully within the next few months I can begin to reveal and announce some of these great new things.
As always, I’m continuously working on new film simulation recipes. I have many that are being tested right now, and a long list of others that I plan to tackle. At the current rate, there could be over 200 film simulation recipes on this website and the app by the end of the year! Amazing!
Let me know in the comments which recipe is your personal favorite!
Inspiration for film simulation recipes can come from unusual places. This recipe, for example, was inspired by a promotional photograph of Ron Howard for the movie American Graffiti hanging on the wall of Mels Diner in Reno, Nevada. A little trivia: Ron Howard shoots Fujifilm cameras—or, at least, he’s been spotted sporting an X100F. Anyway, it seems unlikely, but it’s true, that an old image of Ron Howard from 1973 hanging on the wall of a restaurant in Reno inspired a new recipe that will be used by hundreds—maybe thousands—of Fujifilm photographers across the world.
This particular picture, which you can see in the image below towards the left-side, had a cross-process look to it, like reversal film developed in negative film chemistry. Of course, cross-processed film can have many different looks, depending on several factors, including (especially) the film used. I have no idea what film or process was used for that Ron Howard picture—I tried researching it, but came up empty; however, while I was waiting for my dinner to arrive at the table, I fiddled with the settings on my Fujifilm X100V and created a facsimile to that picture aesthetic.
Picture of Ron Howard (left-side) that inspired this recipe… captured with this recipe.
The photographer who captured the picture is most likely Dennis Stock. I couldn’t find a whole lot about what films he used for his color photographs or his darkroom techniques. Dennis was a legendary Magnum photographer who was best known for his celebrity photographs. His picture might not actually be cross-processed film, but it has a cross-processed look nonetheless.
The reason why I named this recipe “Xpro ’62” is because Xpro is a common abbreviation for “cross-process” and 1962 is the year that American Graffiti takes place. Promotional posters for the movie often included the question, “Where were you in ’62?” I thought that “Xpro ’62” would be a logical fit. Because this film simulation recipe uses the Classic Negative film simulation and other new JPEG options available on the newer cameras, it is only compatible with (as of this writing) the Fujifilm X-Pro3, X100V, X-T4, X-S10 and X-E4. Also, for some of the pictures in this article I used a Tiffen 1/4 Black Pro Mist filter to diffuse the highlights (such as Empty Diner at the top).
Wharf – Santa Cruz, CA – Fujifilm X100V – “Xpro ’62”
Classic Negative Dynamic Range: DR400 Highlight: +3 Shadow: 0 Color: +4 Noise Reduction: -4 Sharpening: -4 Clarity: -4 Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto, -3 Red & -9 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +1/3 (typically)
Example photographs, all camera-made JPEGs using this new “Xpro ’62” film simulation recipe on my Fujifilm X100V:
Cigarettes – Reno, NV – Fujifilm X100V
Wall Harley – Reno, NV – Fujifilm X100V
In Bottles – Reno, NV – Fujifilm X100V
Stay Apart – Hollister, CA – Fujifilm X100V
Casa de Cherries – Hollister, CA – Fujifilm X100V
Basketball Hoop Unused – San Francisco, CA – Fujifilm X100V
Stop Turning – Santa Cruz, CA – Fujifilm X100V
Tracks & Bridge – Santa Cruz, CA – Fujifilm X100V
Suburban Truck – Reno, NV – Fujifilm X100V
Electric Intersection – Reno, NV – Fujifilm X100V
Flower by the Path – Reno, NV – Fujifilm X100V
Flowers & Stone – Hollister, CA – Fujifilm X100V
Lower Yosemite Falls – Yosemite NP, CA – Fujifilm X100V
Tree & Lower Falls – Yosemite NP, CA – Fujifilm X100V
Yosemite Trees – Yosemite NP, CA – Fujifilm X100V
Sentinel Above Merced River – Yosemite NP, CA – Fujifilm X100V
Upper Yosemite Falls – Yosemite NP, CA – Fujifilm X100V
El Cap – Yosemite NP, CA – Fujifilm X100V
El Cap & Merced – Yosemite NP, CA – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Don’t Walk Under Falling Bicycles – Farmington, UT – Fujifilm X-T30 – “Chrome Bypass”
There are a number of X-Trans IV film simulation recipes that I’ve had multiple requests to create versions for that are compatible with X-Trans III and X-T3 and X-T30 cameras. LomoChrome Metropolis and Bleach Bypass are two that are commonly requested. These recipes require JPEG settings that don’t exist on the “older” cameras, including the Classic Negative or Eterna Bleach Bypass film simulations. I knew it would be impossible to recreate those recipes for X-Trans III and the X-T3 and X-T30 cameras, but I wanted to get as close as I could. After much experimenting, I came up with some settings that are sometimes similar to the LomoChrome Metropolis recipe and are sometimes similar to the Bleach Bypass recipe, and sometimes not like either.
What the LomoChrome Metropolis and the Bleach Bypass recipes have in common are that they’re both high in contrast and low in color saturation. There are some other similarities between them, but there’s plenty that’s different, too. This recipe with certain subjects and in certain light situations can resemble one or the other, or neither. It’s as close as I could get. If you like the LomoChrome Metropolis and Bleach Bypass recipes, this is your best bet for X-Trans III and X-T3 and X-T30 cameras (aside from doing double-exposures). While it’s not as “perfect” as I was hoping to achieve, I think it’s a pretty good recipe for capturing dramatic pictures. It’s kind of (but not really) the low saturation version of Dramatic Classic Chrome.
Because these settings resemble both the LomoChrome Metropolis and the Bleach Bypass film simulation recipes, I decided to name this recipe Chrome Bypass, taking a little from each name. I don’t currently have access to an X-Trans III camera, so I don’t have any samples captured with a Fujifilm X-Trans III camera, but it should look very similar.
PRO Neg. Std Dynamic Range: DR200 Highlight: +3 Shadow: +4 Color: -4 Color Chrome Effect: Off or N/A Sharpness: -1 Noise Reduction: -4 Grain Effect: Strong White Balance: Auto, +2 Red & -5 Blue ISO: Auto up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Sample photographs, all camera-made JPEGs, captured with a Fujifilm X-T30 using this “Chrome Bypass” film simulation recipe:
Mountain Teasels – Farmington, UT – Fujifilm X-T30
Cloudy Branches – Farmington, UT – Fujifilm X-T30
Summer Tree – Farmington, UT – Fujifilm X-T30
Country Fence & Old Tires – Farmington, UT – Fujifilm X-T30
Tulip Pot – Farmington, UT – Fujifilm X-T30
Colorful Tulips – Farmington, UT – Fujifilm X-T30
Handy Dandy Grill – Farmington, UT – Fujifilm X-T30
Little Bit of Green – Farmington, UT – Fujifilm X-T30
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
One of my favorite film simulations is Eterna. There’s a special quality to it that’s different than the other film simulations, with its low contrast and muted colors. Yes, you can get pretty close to Eterna using PRO Neg. Std, but you cannot completely match the lovely subtle tonality of it. I think the Eterna film simulation is a little underrated, as it’s a great base for crafting recipes, and I was eager to create a new look with it—so I did!
Real Eterna is a motion picture film. Actually, there have been a number of different film stocks that Fujifilm has given the name Eterna to. The film simulation of the same name doesn’t exactly match any specific Eterna film, yet it has a great general Eterna cinematic feel. In my opinion, the Eterna film simulation is good for achieving an analog color negative film aesthetic.
The first recipe that I created that uses the Eterna film simulation is simply called Eterna, and I really like how that one turned out. I wanted to make something similar, but not identical, using the additional JPEG options that Fujifilm has added to their newer X-Trans IV cameras. I wanted a warm vintage film look—something that could possibly be confused as being actual analog—without being based on any specific film. I think it looks pretty good, and I hope that you do, too.
El Capitan – Yosemite NP, CA – Fujifilm X-E4 – “Eterna v2”
Because this film simulation recipe requires the new Auto White Priority white balance, it is only compatible with the X-T4, X-S10 and X-E4; however, for outdoor natural light photography, using Auto white balance will produce identical results, which means that you can use this Eterna v2 recipe with the X100V and X-Pro3! For indoor artificial light photography, using Auto white balance will produce overly warm images, so Auto White Priority works better, but right now only the three newest Fujifilm X cameras have that option. For the X-T3 and X-T30, in addition to using Auto white balance, you’ll have to disregard Color Chrome Effect Blue and Clarity, and consider setting Highlight to +2 and Shadow to +1 plus Sharpness to -2 to compensate, as well as disregard Grain size (simply use Strong). It won’t be identical, but it will be very similar—I tested it out on my X-T30 and it works.
Eterna Dynamic Range: DR400 Highlight: +3 Shadow: +2 Color: +3 Noise Reduction: -4 Sharpness: 0 Clarity: -3 Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto White Priority (X100V + X-Pro3: Auto), +4 Red & -7 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Eterna v2” film simulation recipe on my Fujifilm X-E4:
Faux Plant on a Table – Farmington, UT – Fujifilm X-E4
J.C. Higgins – Farmington, UT – Fujifilm X-E4
Empty Grapefruit Box – Bountiful, UT – Fujifilm X-E4
Duerden’s Will Call – Bountiful, UT – Fujifilm X-E4
Reaching Tree Branches – Bountiful, UT – Fujifilm X-E4
Flower Tree – Farmington, UT – Fujifilm X-E4
Click – Layton, UT – Fujifilm X-E4
Sevenhundred Sixty – Farmington, UT – Fujifilm X-E4
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Since 1938 – Farmington, UT – Fujifilm X-E4 – “Ektachrome 320T”
The Ektachrome line has been around since the 1940’s, but Kodak didn’t introduced Ektachrome 320T, also known as Ektachrome EPJ 320T, until 1992. This was a high-speed Tungsten color-reversal (slide) film intended for use under artificial light. Tungsten films were never as popular as daylight-balanced films; when used in daylight you get a strong blue cast (unless you have an 80A filter). I’m not completely sure when Kodak discontinued Ektachrome 320T, but I believe it was sometime in the early to mid 2000’s—all Ektachrome films were discontinued by 2013. When Kodak reintroduced Ektachrome in 2018, EPJ 320T was unsurprisingly not included.
This film simulation recipe was not intended to mimic Ektachrome 320T. I was simply trying to create a tungsten film look using the new Eterna Bleach Bypass film simulation. Prior to this I had only one recipe for Eterna Bleach Bypass, LomoChrome Metropolis, so I was eager to create another. The reason for a tungsten-like recipe is because I feel as though I don’t have as many after-dark options as I’d like. This recipe’s similarities to Ektachrome 320T film is coincidental, as I didn’t set out to recreate it, but it does, in fact, resemble the film fairly well.
On – Farmington, UT – Fujifilm X-E4 – “Ektachrome 320T”
Even though I didn’t intend to create an Ektachrome 320T recipe, these settings come curiously close. I would consider, when using this recipe under artificial light, setting the White Balance Shift to -7 Red & -6 Blue to more accurately reflect the film (I didn’t make that adjustment for any of the photographs in this article). I wish that +5 was an option for Color—that would likely be more accurate to the film—but unfortunately it tops out at +4. I debated if Grain size should be Small or Large, but I ended up going with Small because that’s what I originally set it to; however, Large grain might be slightly closer to what you’d find on actual Ektachrome 320T, although that’s certainly debatable.
This recipe is the first one to use the new Auto Ambience Priority white balance, which is currently (as of this writing) only available on the Fujifilm X-T4, X-S10 and X-E4 cameras. That means this recipe is only compatible with those three cameras. As a reminder, the camera will take a moment to save each exposure when using Clarity. Also, High ISO NR on the newer camera models is the same as Noise Reduction—Fujifilm renamed it for some reason, but it’s the same thing.
Eterna Bleach Bypass Dynamic Range: DR400 Highlight: +1 Shadow: -2 Color: +4 Noise Reduction: -4 Sharpening: 0 Clarity: -3 Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto Ambience Priority, -6 Red & -5 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this Ektachrome 320T film simulation recipe on my Fujifilm X-E4:
White Tree, Blue Sky – Farmington, UT – Fujifilm X-E4
Thistle Field – Farmington, UT – Fujifilm X-E4
Fake Plant on a Table – Farmington, UT – Fujifilm X-E4
Cage Free Eggs – Bountiful, UT – Fujifilm X-E4
Lifted – Bountiful, UT – Fujifilm X-E4
Old Navy Carts – Farmington, UT – Fujifilm X-E4
Ghost Mart – Farmington, UT – Fujifilm X-E4
Pot & Bench – Farmington, UT – Fujifilm X-E4
Lights in a Puddle – Farmington, UT – Fujifilm X-E4
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Accidents happen. Sometimes they’re happy accidents that lead to great discoveries, and sometimes they’re not. An example of one that wasn’t happy is when Omar Gonzalez accidentally used Classic Chrome instead of Classic Negative with the Agfa Vista 100 film simulation recipe. When I saw it, I thought, “You know, I’m going to make this mistake work, and call it ‘Agfa Vista Baby’—I just need to figure out what situations it works well in.” But, try as I might, Agfa Vista using Classic Chrome instead of Classic Negative just doesn’t look good. Sorry, Omar. An example of a happy accident is this recipe—it was discovered by mistake, but I’m very glad to have made that mistake.
You see, back in the fall I was shooting in Montana with what was at the time a brand-new yet-to-be-published recipe that’s now known as Kodak Portra 400 v2. Somehow I managed to accidentally change the film simulation from Classic Chrome to Classic Negative, and I shot a number of frames with this before I realized my mistake. As I reviewed the pictures I realized that the results were pretty good, and that this mistake was actually good fortune. As Lefty Gomez coined, “I’d rather be lucky than good.”
What does this film simulation recipe resemble? Of course, since it’s based on the Classic Negative film simulation, it has a Superia-like aesthetic, as that is what Classic Negative is modeled after. But to me it feels more vintage than Superia. I kept thinking that I’ve seen this look before. Not every picture makes me feel this way, but some—Autumn Aspen, Mill Creek, Blossoming Branch, etc.—seem to have this vintage vibe that I recognize from somewhere. But where?
Red on Pine – Big Fork, MT – Fujifilm X100V – “Vintage Vibes”
Wet Red Leaves – Big Arm, MT – Fujifilm X100V – “Vintage Vibes”
I was digging through some old issues of Arizona Highways Magazine, which, if you are unaware, is full of fantastic photography—Ansel Adams was a fairly regular contributor back in the day—and I found a very similar aesthetic on the pages of that magazine. From the mid-1960’s through the early-1980’s, there are images with this look, by numerous photographers. I did research in an attempt to discover what films were used for those pictures, but unfortunately that was largely a dead-end. I’m not sure if it’s a specific film that creates this look (and, if so, which one?), or if it’s a byproduct of the printing process that was used, or the fading ink, or a combination of all that, but this film simulation recipe, which I call “Vintage Vibes” for lack of a better name, can be, in the right situations, very similar. It’s also similar, in the right situations, to Fujicolor Superia. Whatever it looks like, it looks good, and I know that many of you will appreciate this recipe.
I’ve been wanting to get this recipe out for awhile. Sometimes it takes time. Now it’s finally ready! This “Vintage Vibes” film simulation recipe is compatible with the Fujifilm X100V, X-Pro3, X-T4, X-S10 and X-E4 cameras.
Classic Negative Dynamic Range: DR400 Highlight: 0 Shadow: -2 Color: +2 Noise Reduction: -4 Sharpening: -2 Clarity: -2 Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: 5200K, +1 Red & -6 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this “Vintage Vibes” film simulation recipe on my X100V and X-E4:
Trees & Dirt Cliff – Layton, UT – Fujifilm X100V
Forest Road – Layton, UT – Fujifilm X100V
Mill Creek – Bountiful, UT – Fujifilm X-E4
Blossoming Branch – Bountiful, UT – Fujifilm X-E4
Sunlit Blossoms – Layton, UT – Fujifilm X100V
Windshield Water – Centerville, UT – Fujifilm X-E4
Johanna & Lens Flare – Farmington, UT – Fujifilm X-E4
Playing in a Dirty Kitchen – Farmington, UT – Fujifilm X-E4
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Forest River – Layton, UT – Fujifilm X-M1 – “Superia Xtra 400” – Photo by Joy Roesch
I handed my Fujifilm X-M1 camera to my daughter, Joy, and told her that she could change the settings to whatever she wanted them to be—you might remember that she created the Winter Blue film simulation recipe. She used the camera to capture a bunch of pictures; afterwards, when I reviewed the images, I was very impressed with the look that she created. I asked her why she chose these settings, and she answered that she had hoped to capture some cherry blossoms, and it was initially overcast when she dialed in the settings, and she thought that it might work well for that.
These settings remind me of my X-Trans IV Superia Xtra 400 film simulation recipe. It’s definitely not an exact match—there’s no way that it could be because X-Trans I cameras don’t have many of the JPEG options that X-Trans IV cameras have, including the Classic Negative film simulation—but it’s surprisingly similar. I don’t imagine it’s possible to get closer. If you have an X-Pro1, X-E1 or X-M1, this is your best bet for a Superia Xtra 400 look. I think it’s also not far off from my Superia Premium 400 recipe, although, again, it’s not an exact match, just in the general ballpark. For some of you, I have no doubts that this will become your new favorite recipe.
Horsetail Reeds – Layton, UT – Fujifilm X-M1 – “Superia Xtra 400” – Photo by Joy Roesch
While this recipe is intended for X-Trans I cameras, it’s possible to use it on Fujifilm Bayer cameras, although it will look slightly different. You can also use it on X-Trans II cameras, but it will look fairly significantly different, although you might like the results anyway, so it might be worth a try.
Astia Dynamic Range: DR200 Highlight: -2 (Low) Shadow: +1 (Medium-High) Color: +2 (High) Sharpness: 0 (Normal) Noise Reduction: -2 (Low) White Balance: Shade, +2 Red & +2 Blue ISO: Auto, up to ISO 3200 Exposure Compensation: +2/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured by Joy using her “Superia Xtra 400” film simulation recipe on a Fujifilm X-M1:
Dirt Cliff Forest – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Sideways Tree – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Photographer Hiding in the Forest – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Forest Creek – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Water in the Woods – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Johanna on a Bridge – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Path Through The Trees – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Small Flower – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Patch of Red – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
White Tree – Layton, UT – Fujifilm X-M1 – Photo by Joy Roesch
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Joshua & Joy at a Creek – Layton, UT – Fujifilm X-T1 – “Portra v2” – Photo by Jon Roesch
I’ve been wanting to create a Kodak Portra 400 film simulation recipe for Fujifilm X-Trans II cameras for a long time now. I’ve had a Portra 160 recipe on this website for awhile, but I’ve never created a Portra 400 recipe for this sensor. I’ve actually created five different Portra 400 recipes for X-Trans III and IV cameras, but those don’t work on X-Trans II. I made a guess on my Fujifilm X-T1 on what might be a good Portra 400 recipe, handed the camera to my son, Jon, and let him capture some pictures with it. You might remember that Jon created his own Classic Chrome recipe; this time I made the recipe, but I let him capture the pictures.
You might be wondering why I didn’t call this recipe “Portra 400” but named it “Portra v2” instead. While I believe that this recipe is similar to Portra 400, I do plan to create a more accurate recipe. Actually, that was my intentions with these pictures: reprocess the RAW files in-camera to refine the Portra look; however, as I reviewed the pictures, I liked the aesthetic created by these settings, so I decided to keep this as its own recipe. I will still work on a different Portra 400 recipe for X-Trans II.
Trees – Layton, UT – Fujifilm X-T1 – “Portra v2” – Photo by Jon Roesch
One film can have many different aesthetics, depending on how it’s shot, developed, scanned or printed, and this is especially true with Kodak Portra 400. Portra can have many different looks. This recipe does resemble one of those aesthetics, but it definitely doesn’t resemble all of the aesthetics, or even the most common. If you do like Portra, I’m confident that you’ll appreciate these settings, which is compatible with all X-Trans II cameras that have the Classic Chrome film simulation.
Classic Chrome Dynamic Range: DR200 Highlight: -1 (Medium-Low) Shadow: -1 (Medium-Low) Color: +2 (High) Sharpness: -1 (Medium-Low) Noise Reduction: -2 (Low) White Balance: Daylight/Fine, +4 Red & -4 Blue ISO: Auto up to ISO 3200 Exposure Compensation: +2/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured by Jon on my Fujifilm X-T1 using this Portra v2 film simulation recipe:
Water – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Fence Tree – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Trees & Lake – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Creek in the Woods – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Trees & Leaves – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Moss on a Log – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Grass – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Bridge – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
My Friend – Layton, UT – Fujifilm X-T1 – Photo by Jon Roesch
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Wet Radio Flyer – Farmington, UT – Fujifilm X-E4 – “Old Kodak”
The Fuji X Weekly app is free, yet becoming a Fuji X Weekly Patron unlocks the best app experience! One benefit of being a Patron is you get early access to some new film simulation recipes. These early-access recipes will eventually become available free to everyone in time, including this new one. In fact, a few of the original early-access recipes have been publicly published on this blog and the app, so everyone can now use them. Patrons help support Fuji X Weekly and, really, without them there would be no app. So I want to give a special “thank you” to all of the Patrons!
This new recipe, called Old Kodak, is similar to Vintage Kodachrome and Kodachrome 1. I was recently viewing some old pictures captured on various Kodak films, and I was reminded of those two film simulation recipes. I thought that with some tweaks I could get closer to mimicking the aesthetic of the old Kodak pictures I was looking at. If you like the Vintage Kodachrome and Kodachrome 1 recipes, you’ll really appreciate this Old Kodak recipe, too! It’s compatible with the Fujifilm X-T4, X-S10 and X-E4 cameras.
If you are a Fuji X Weekly Patron, it’s available to you right now on the app!
I’ve had many requests to create a LomoChrome Metropolis recipe, but it was impossible until Fujifilm created the new Eterna Bleach Bypass film simulation and new Auto White Priority white balance. LomoChrome Metropolis film, which is a Lomography product, has only been around for a couple of years. The film is high-contrast, with low-saturation and a warm cast. It has a cool retro-feel despite being new.
There’s a special quality to this LomoChrome Metropolis recipe. It’s almost a color version of black-and-white photography. In the right situations it creates a wonderful look that’s easy to love. It often mimics the film pretty faithfully. I’m very happy with how this one turned out, and I used it recently on a trip to Arizona.
This LomoChrome Metropolis recipe has been on the Fuji X Weekly app as a Patron Early-Access recipe since December 1st when the app launched. All of the Patron Early-Access recipes will eventually be made available to everyone as they’re replaced with new ones, which means that there’s a new recipe for Fuji X Weekly Patrons on the app right now, so if you’re a Patron, go check it out. This LomoChrome Metropolis recipe has been unlocked, so everyone now has access to it.
Dark Blossoms – Phoenix, AZ – Fujifilm X-E4 – “LomoChrome Metropolis”
Because this recipe requires Eterna Bleach Bypass, Auto White Priority and a .5 adjustment, it’s only compatible with the Fujifilm X-T4, X-S10, and X-E4 cameras. Unfortunately, all of the other X-Trans IV cameras (as of this writing) don’t have the required JPEG options, so it’s not compatible with other cameras. If you have an X-T4, X-S10 and X-E4, you might really appreciate this new film simulation recipe!
Eterna Bleach Bypass Dynamic Range: DR200 Highlight: +1 Shadow: +2.5 Color: -2 Noise Reduction: -4 Sharpening: -1 Clarity: +4 Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto White Priority, +1 Red & -7 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this LomoChrome Metropolis film simulation recipe:
Artful Girl – Farmington, UT – Fujifilm X-T4
National Geographic Bag – Phoenix, AZ – Fujifilm X-E4
Bouquet of Fake Flowers – Phoenix, AZ – Fujifilm X-E4
Blossoming Red – Phoenix, AZ – Fujifilm X-E4
Tropical Bloom – Phoenix, AZ – Fujifilm X-E4
Red Winter Berries – Farmington, UT – Fujifilm X-T4
Dirt Desert Drive – Phoenix, AZ – Fujifilm X-E4
Sunlight Through a Dormant Tree – Farmington, UT – Fujifilm X-T4
Backlit Reeds – Farmington, UT – Fujifilm X-T4
Suburban Triangles – Farmington, UT – Fujifilm X-T4
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
One of the more popular film simulation recipes that I’ve created is Kodachrome II, which was made for X-Trans III sensor cameras. While you can use that recipe on X-Trans IV cameras, the newer models have some JPEG options that the older ones don’t, so it can be fun to utilize those options to produce a different and hopefully better version of an old recipe. In this case, I have two new versions of Kodachrome II for X-Trans IV cameras.
Kodak introduced Kodachrome in 1935, and in 1961 they replaced the original film with a new and improved version called Kodachrome II and a higher-ISO sibling called Kodachrome-X. These films had more accurate color, finer grain and faster ISOs (ISO 25 and 64, respectively, compared to ISO 10) than the previous version. It was a big leap forward for color photography, and so it is no surprise that the innovators of color photography in the 1960’s and 1970’s relied heavily on it. It’s also the version that Paul Simon sang, “They give us the greens of summer, makes you think all the world’s a sunny day.”
Kodachrome II and Kodachrome-X produced a very similar look to each other. The main differences were in grain, contrast and saturation, but overall the variations were quite minor. Kodachrome-X was slightly more bold while Kodachrome II was slightly more clean. Even so, comparing slides, it’s tough to distinguish one from the other (conveniently, I have my grandparents old slides at my home). Even though I have named these two film simulation recipes “Kodachrome II” I think they more closely resembles Kodachrome-X film, but I find them to be a reasonable facsimile for both.
Yellow Arrow – Farmington, UT – Fujifilm X-E4 – “Kodachrome II v2”
Because of the toxic chemicals used in the development of this era of Kodachrome, plus the complexity of the process, Kodak changed from K-12 development to K-14 development, which ushered in new Kodachrome in 1974, called Kodachrome 25 and Kodachrome 64. This version of the film is the one that I have personally used. Interestingly enough, even though this version wasn’t all that much aesthetically different than the previous, there was a big outcry among photographers, and a large group who used Kodachrome II and Kodachrome-X did not appreciate the change.
While I created the X-Trans III Kodachrome II recipe, it was Thomas Schwab who modified it for X-Trans IV. His version, entitled Kodachrome II, is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10 and X-E4. In some of my example pictures below I used a Tiffen 1/4 Black Pro-Mist diffusion filter with my X100V. Why? Because I haven’t used this filter in awhile and wanted to. I don’t think it adds anything essential to the recipe. In fact, you might prefer the results without the filter. Thank you, Thomas, for creating and sharing this update to the original recipe!
I made a slightly modified version, entitled Kodachrome II v2, which is compatible with the X-T4, X-S10 and X-E4. I used this recipe on my X-E4 (without any diffusion filter). This isn’t intended to be a “better” recipe, just a slightly different version using the new JPEG options found in my X-E4. Both of these film simulation recipes can be found in the Fuji X Weekly app!
Kodachrome II
Classic Chrome Dynamic Range: DR200 Highlight: +1 Shadow: +2 Color: +1 Noise Reduction: -4 Sharpening: +1 Clarity: -2 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Auto, +3 Red & -4 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this new Kodachrome II film simulation recipe on my Fujifilm X100V:
Rooflines – Farmington, UT – Fujifilm X100V
Backyard Play Kitchen – Farmington, UT – Fujifilm X100V
Playing Backyard Kitchen – Farmington, UT – Fujifilm X100V
Hover Scooter – Farmington, UT – Fujifilm X100V
Chair by a Fence – Farmington, UT – Fujifilm X100V
Jo in Evening Light – Farmington, UT – Fujifilm X100V
Brothers – Farmington, UT – Fujifilm X100V
Easter Egg Basket – Farmington, UT – Fujifilm X100V
Jon with Walkie Talkie – Farmington, UT – Fujifilm X100V
Fake Plants on a Shelf – Farmington, UT – Fujifilm X100V
Kodachrome II v2
Classic Chrome Dynamic Range: DR200 Highlight: +1 Shadow: +1.5 Color: +1 Noise Reduction: -4 Sharpening: +1 Clarity: -2 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Auto White Priority, +3 Red & -5 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this new Kodachrome II v2 film simulation recipe on my Fujifilm X-E4:
Table Between Chairs – Farmington, UT – Fujifilm X-E4
Brothers Playing Together – Farmington, UT – Fujifilm X-E4
Fenced Horse – Farmington, UT – Fujifilm X-E4
Bicycle Sky – Farmington, UT – Fujifilm X-E4
Stop the Storm – Farmington, UT – Fujifilm X-E4
Grabber – Farmington, UT – Fujifilm X-E4
Handle – Farmington, UT – Fujifilm X-E4
Hand Spade – Farmington, UT – Fujifilm X-E4
Jo Holding a Toy – Farmington, UT – Fujifilm X-E4
Jo & Josh Playing – Farmington, UT – Fujifilm X-E4
There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
In my kit are two Fujifilm cameras: an X100V and an X-E4. The X100V is capable of saving seven recipes, while the X-E4 is capable of saving eight, which means that I could have had as many as 15 different film simulations ready-to-go between the two cameras! Of course, with the Fuji X Weekly app, I had access to many, many more, which I could have quickly programmed if I had wanted to. I ended up using 10 different recipes: two on my X100V and eight on my X-E4.
While I could have used as many as 15 recipes, and I ended up using 10, I think no more than eight film simulation recipes for one trip might be a better strategy. It would have made a lot of sense to have the same ones programmed into both cameras, just for consistency. Still, it’s fun to see how different recipes do in various situations, so maybe consistency isn’t as big of a deal as enjoyment is—there’s something to be said for both, so maybe it’s important to find the right balance, and that number is likely different for each person.
On my Fujifilm X100V I had seven film simulation recipes programmed into the camera, but I only used two on this trip. I ended up using the X100V a lot less than I thought I would, mostly because the X-E4 had just arrived, and I was trying to put it through its paces. If I had shot with the X100V more, I likely would have used more than just two recipes with it. On my next trip I plan to program the two cameras with, for the most part, the same recipes.
Of the eight film simulation recipes that I programmed into the X-E4, two are currently early-access recipes only available to Fuji X Weekly Patrons on the Fuji X Weekly app: Vintage Negative and Lomochrome Metropolis. These two recipes will eventually be free to everyone, but right now only Patrons can access them.
The recipes that I used the most are Fujicolor Superia 800, Kodachrome 64, and Kodak Tri-X 400. If I only used those three for the trip, I would have been happy, I think. But it’s fun to try different ones. For example, Lomochrome Metropolis and B&W IR aren’t always easy to use, but in the right situations they can produce stellar results.
Sometimes film simulation recipes can be used with sensors that they weren’t intended for, but the results can still be good. For example, X-Trans I & II recipes can be used with Bayer sensor cameras, like the X-T200; while the results won’t be identical, you might appreciate the aesthetic anyway. I’ve used Bayer recipes an my X-T1, which is X-Trans II, with good results. The recipe that I used in the video is intended for the X-T3 and X-T30 cameras, but it worked well on the GFX-50S.
The Fuji X Weekly — Film Recipes App is a mobile film simulation recipe library containing over 100 recipes for Fujifilm cameras! The film simulation recipes in the app are the same ones that you know and love from this website, but now take them with you on the go, and have them at your fingertips wherever you are!
The Fuji X Weekly app is free! No annoying ads. Get access to 100+ film simulation recipes, which can be sorted alphabetically or chronologically. Each recipe contains an assortment of sample images, as well as a list of compatible cameras. Within each recipe there’s a place where you can keep notes, a useful feature for many of you, no doubt. The app will work offline, so if you don’t have internet access but need to find a certain recipe, no problem! The Fuji X Weekly app is a handy tool for Fujifilm photographers, an essential app to accompany your X-series camera.
This app does have some advanced features that can be unlocked by becoming a Fuji X Weekly Patron! These advanced features include filtering by sensor or camera, as well as by film simulation or color/B&W, and the ability to favorite recipes for quick access. The best app experience is reserved for Patrons!
Fuji X Weekly Patrons also get early access to some new film simulation recipes. There are 9 brand-new film simulation recipes that only Patrons can view. These recipes will eventually be published on Fuji X Weekly—free to everyone—but right now they’re available only to Patrons. As new early-access recipes are cycled into the app for Patrons, the others will be made available on this website and on the app free to all, so no worries.
By becoming a Fuji X Weekly Patron, which is only $19.99 annually, you unlock the app’s full potential, you get early access to some new film simulation recipes, and you help support Fuji X Weekly! It’s a win-win!
Big Sky Over Yellow House – Farmington, UT – Fujifilm GFX-50S – “Provia 400”
This film simulation recipe was a failed attempt to create a certain look, but I liked the results anyway. It reminds me of Fujichrome Provia 400, but it isn’t intended to mimic that film, it just looks a little similar by chance. As Lefty Gomez said, “I’d rather be lucky than good.” This Provia 400 recipe was indeed a lucky discovery.
Provia 400 is a color reversal (slide) film that actually dates back to 1980. It was originally called Fujichrome 400 Professional D, and had a couple emulsion updates before Fujifilm renamed it Fujichrome Provia 400 in 1994, Fujichrome Provia 400F in 2000, and Provia 400X in 2006. With each emulsion change the aesthetic of the film evolved slightly, which isn’t uncommon. This recipe might be closest to the 400X version. Fujifilm discontinued ISO 400 Provia in 2013.
This film simulation recipe is intended for GFX-50S and GFX-50R cameras. I assume that it will also work on the GFX100 and GFX100S, but I’m not certain of that. Additionally, it is compatible with X-Trans IV; I tried it on my Fujifilm X-T30 and it looked pretty close, only ever-so-slightly different. On newer X-Trans IV cameras, which have some different JPEG options, consider setting Grain size to Small, Color Chrome FX Blue to Weak, and Clarity to -2.
Provia/STD Dynamic Range: DR400 Highlight: +1 Shadow: +2 Color: +4 Color Chrome Effect: Strong Sharpening: -2 Noise Reduction: -4 Grain Effect: Strong White Balance: Fluorescent 2, -2 Red & -2 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Sample photographs, all camera-made JPEGs, captured with a Fujifilm GFX-50S using this Provia 400 recipe:
Reeds & Birds – Farmington, UT – Fujifilm GFX-50S
Three Wood Poles – Farmington, UT – Fujifilm GFX-50S
Cattails & Reeds – Farmington, UT – Fujifilm GFX-50S
Fallen Down – Farmington, UT – Fujifilm GFX-50S
Boat Ramps Are Built – Farmington, UT – Fujifilm GFX-50S
Muddy Shore – Farmington, UT – Fujifilm GFX-50S
Bridge Over Shallow Water – Farmington, UT – Fujifilm GFX-50S
Closed Red Door – Farmington, UT – Fujifilm GFX-50S
Red Can Topper – Weber Canyon, UT – Fujifilm GFX-50S
Tree & Cold River – Weber Canyon, UT – Fujifilm GFX-50S
Hastings Cutoff – Weber Canyon, UT – Fujifilm GFX-50S
Reflection on the Cold Wet Road – Weber Canyon, UT – Fujifilm GFX-50S
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Dark Sunset over Salt Lake – Antelope Island SP, UT – Fujifilm X100V – “Creamy Color”
There are some film simulation recipes that just have a special look—the “it factor”—and this “Creamy Color” recipe is definitely one of those! I didn’t make it; this one was created by Immanuel Sander, who also created the Nature Neon recipe. Immanuel was kind enough to allow me to publish his recipe on the Fuji X Weekly blog, and he also gave me permission to include some of his wonderful photographs in this article. Thank you, Immanuel, for creating and sharing this recipe! I encourage you to follow him Instagram.
Immanuel created a great YouTube video for this recipe that you should watch. It’s very inspirational—well done!
“It’s a rather emotional recipe for me,” Immanuel explained. “The recipe works very well in bad weather and dreary colors. Foggy weather or rainy days are perfect for such silent pictures.” I think it also works well around sunset and on partly-cloudy days. The results from this Creamy Color film simulation recipe can be fantastic! Because this recipe requires Classic Negative, Clarity and Color Chrome FX Blue, it’s only compatible with the Fujifilm X100V, X-Pro3, X-T4, X-S10 and the upcoming X-E4.
Classic Negative Dynamic Range: DR400 Highlight: +4 Shadow: +4 Color: -4 Noise Reduction: -4 Sharpening: -4 Clarity: -5 Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: 8700K, +4 Red & +6 Blue ISO: up to ISO 5000 Exposure Compensation: +1/3 (typically)
Example photographs, all camera-made JPEGs captured with this Creamy Color film simulation recipe:
Immanuel Sander
Photo by Immanuel Sander
Photo by Immanuel Sander
Photo by Immanuel Sander
Photo by Immanuel Sander
Photo by Immanuel Sander
Photo by Immanuel Sander
Ritchie Roesch
Last Light on a Pine – Farmington, UT – Fujifilm X100V
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch – “Winter Blue”
I handed a Fujifilm X-M1 to my 13-year-old daughter, Joy—gave her a brief tutorial on how to use the camera, and let her have at it. Attached to the camera was a Pergear 10mm f/8 Fisheye lens, which is challenging to use, but can also be rewarding. I thought that maybe the lens would be too difficult for her, but it turns out that I had nothing to worry about, as she did great with it.
I had my Provia recipe programmed into the camera, but Joy changed the settings, making up her own film simulation recipe. I asked her why she chose her settings, and she answered that snow looks nice with lots of blue, so she wanted to create a blue-look. When I asked her what she would name the recipe, she replied, “Winter Blue.” It has sort of a Fujichrome 64T aesthetic, but really it’s too warm for that, so maybe it loosely resembles if you used that film in conjunction with a warming filter? I don’t know how well this recipe might do in other conditions, but it certainly looks good on a blue-sky winter day.
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch – “Winter Blue”
Velvia Dynamic Range: DR400 Highlight: -1 (Medium-Low) Shadow: 0 (Normal) Color: -2 (Low) Sharpness: 0 (Normal) Noise Reduction: -2 (Low) White Balance: Daylight (“Fine”), 0 Red & +2 Blue ISO: Auto, up to ISO 3200 Exposure Compensation: +2/3 (typically)
Example photographs, all camera-made JPEGs captured by Joy using her Winter Blue film simulation recipe on a Fujifilm X-M1:
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-M1 – Farmington, UT – Photo by Joy Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch – “Jon’s Classic Chrome”
I handed my Fujifilm X-T1 to my 11-year-old son, Jonathan—gave him a brief tutorial on how to use the camera, and let him have at it. My XF10 Classic Chrome film simulation recipe was programmed into the X-T1; to my surprise, Jon made a few small adjustments to it. He increased Dynamic Range to DR400, moved the White Balance Shift to +4 Red, and set Sharpness at 0. I’m not sure why he made those specific changes, but the results are pretty good, and I’m very proud and impressed by the pictures that he captured with the X-T1 using his settings!
My opinion is that this recipe has a ColorPlus feel to it. It could be close to Kodacolor, Portra 400, or Ultramax—it definitely has a Kodak color negative vibe; however, I think Fujicolor C200 might also be in the neighborhood. Whatever film it might be close to, it’s got a great analog-like aesthetic that’s easy to love. Great job, Jon!
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch – “Jon’s Classic Chrome”
Classic Chrome Dynamic Range: DR400 Highlight: +1 (Medium-High) Shadow: +2 (High) Color: +1 (Medium-High) Sharpness: 0 (Medium) Noise Reduction: -2 (Low) White Balance: Auto, +4 Red & -4 Blue ISO: Auto up to ISO 3200 Exposure Compensation: +2/3 (typically)
Example photographs, all camera-made JPEGs captured by Jon on my Fujifilm X-T1 using his Classic Chrome film simulation recipe:
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
Fujifilm X-T1 – Farmington, UT – Photo by Jonathan Roesch
The Fuji X Weekly app is free, yet becoming a Fuji X Weekly Patron unlocks the best app experience! One benefit of being a Patron is you get early access to some new film simulation recipes. These early-access recipes will eventually become available free to everyone in time, including this new one. In fact, a couple of the original early-access recipes have been publicly published on this blog and the app, so everyone can use them now. Patrons help support Fuji X Weekly and, really, without them there would be no app. So I want to give a special “thank you” to all of the Patrons!
This new Patron early-access film simulation recipe is called “Fujicolor NPH” because it is inspired by that film. Actually, I was attempting a Fujicolor Pro 400H recipe. I have a couple already: Fujicolor Pro 400H for X-Trans III and Fujicolor Pro 400H Overexposed for X-Trans IV. I don’t think either are 100% accurate to the film; perhaps no recipe is, but some are closer than others. I really like this new version I made—I believe it’s closer than the X-Trans III recipe, but it’s not a perfect match. I actually think it’s closer to Fujicolor NPH 400 film, which was the predecessor to Pro 400H. Those two emulsions were nearly identical, with only some small differences, so this new recipe does well at mimicking both, but in my opinion it’s slightly closer to NPH 400.
If you are a Fuji X Weekly Patron, this new Fujicolor NPH film simulation recipe is already on the app!
Weber River in Winter – Weber Canyon, UT – Fujifilm X100V – “Fujicolor NPH”
Honey Salmon – Salt Lake City, UT – Fujifilm X100V – “Fujicolor NPH”
