These two recipes aren’t actually new, they’re just new to the app. I’ve created so many different film simulation recipes over the last few years, sometimes it’s hard to keep track of them all. Right now there are 135 different ones on the app! The two that I just added were somehow overlooked. By request, they’re now included on the app.
Let’s take a look at these two new (yet old) film simulation recipes!
Pointing Towards the Sky – Layton, UT – Fujifilm X-T30
My Kodacolor film simulation recipe is quite popular as it produces a great vintage-analog aesthetic that’s easy to love. Kodacolor film has been around for a long time—the name was first used by Kodak in 1942—and many different emulsions have had this brand name on it. Interestingly, Kodacolor was the first color negative film intended for making prints.
Stephen Shore shot a lot of Kodacolor, mostly Kodacolor-X and Kodacolor II, but also likely the original Kodacolor, Kodacolor 400, and Kodacolor-VR. While Shore did shoot 35mm film, he is most known for his medium-format and large-format photographs. Something I learned is that medium and large format Kodacolor film is more saturated than the 35mm emulsion. The only difference between the original Kodacolor recipe and the Stephen Shore Kodacolor recipe is that Color is turned up a little, otherwise they’re identical.
Smiling Jonathan – South Weber, UT – Fujifilm X-T30
When Fujifilm introduced the Eterna film simulation on the X-H1, I received several requests to create a recipe that mimics it for cameras that don’t have Eterna. At the time, there weren’t many example pictures captured with Eterna, yet I made an attempt anyway, but it turned out to be inaccurate. Once I had a chance to use Eterna, I created this Faux Eterna recipe, which is much closer to the film simulation.
I’ve been wanting to create a new Velvia recipe for awhile now. The previous version is bold, but sometimes produces too much contrast. This recipe is actually a little closer to my original Velvia recipe, but with even less contrast yet with more saturation. This Velvia v2 recipe doesn’t closely mimic any specific version of Velvia film, yet it still retains an overall Velvia-like aesthetic.
Velvia is a high-saturation, low-ISO color reversal (slide) film introduced in 1990. I’ve shot many rolls of it, mostly the original ISO 50 version, but also the “new” Velvia 50, Velvia 100F and Velvia 100 emulsions. Of those films, this recipe is probably closest to Velvia 100, but not exactly like it.
Brown Reflection – Farmington, UT – Fujifilm X-T30 – “Velvia v2”
This film simulation recipe is intended for the Fujifilm X-T30 and X-T3 cameras. If you have “newer” X-Trans IV cameras, you might consider Color Chrome Effect Blue set to Weak, Grain set to Weak and Small, and Clarity set to +2 perhaps. If you have an X-Trans III camera, which doesn’t have Color Chrome Effect, you can still use this recipe, but the results will be slightly different. Those with GFX cameras can also use this recipe, and it will look very close but not exactly the same.
Velvia Dynamic Range: DR200 Highlight: -1 Shadow: -1 Color: +4 Noise Reduction: -4 Sharpening: 0 Grain Effect: Weak Color Chrome Effect: Strong White Balance: Auto, 0 Red & 0 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs, captured using a Fujifilm X-T30 with this Velvia v2 film simulation recipe:
March Reeds – Farmington, UT – Fujifilm X-T30
Reeds in Evening Light – Farmington, UT – Fujifilm X-T30
Water Under The Bridge – Farmington, UT – Fujifilm X-T30
Muddy Water – Farmington, UT – Fujifilm X-T30
Ducks in the Shallow Water – Farmington, UT – Fujifilm X-T30
Flying Seagull – Farmington, UT – Fujifilm X-T30
Evening Gull – Farmington, UT – Fujifilm X-T30
Utah Reeds – Farmington, UT – Fujifilm X-T30
Evening Cloud Over The Ridge – Farmington, UT – Fujifilm X-T30
Grass, Pond & Mud – Farmington, UT – Fujifilm X-T30
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
The upcoming Fujifilm GFX100S has a brand new film simulation called Nostalgic Negative. Even though this camera hasn’t even been released yet, I’ve had many requests to create a film simulation recipe for it. That’s a tough challenge because there’s so little about Nostalgic Negative that’s known and very few sample pictures floating around the internet.
Back when Eterna was new—before I had a chance to try it myself—I made a faux “Eterna” recipe, and it turned out to be not particularly close. Even though it didn’t faithfully mimic Eterna, it’s one of the more popular recipes on this website. When Classic Negative first came out, I made a faux “Classic Negative” recipe, and even though it also turned out to be not particularly close, I’ve had several people tell me that it’s their favorite recipe. There’s two important points to this: 1) this “Nostalgic Negative” recipe will likely turn out to be an inaccurate facsimile to the real Nostalgic Negative film simulation and 2) there are people who love it anyway. With that disclaimer out of the way, let’s get into what Nostalgic Negative is and how you can achieve a similar aesthetic on your Fujifilm X camera.
Watch and Jewelry – Farmington, UT – Fujifilm X100V – “Nostalgic Negative”
Fujifilm stated that the Nostalgic Negative film simulation is based on “American New Color” photography of the 1970’s. They studied photographs by William Eggleston, Stephen Shore, Joel Sternfeld and Richard Misrach in order to create it. Eggleston and Sternfeld largely shot on Kodachrome—II and X in the early 1970’s, 25 and 64 in the late ’70’s—while Shore shot mostly Kodacolor, and Misrach shot a lot of Vericolor. All of those are Kodak films, but with different aesthetics. These four photographers had different styles and different darkroom processes, and they each had a unique look; the commonality that Fujifilm found was an “overall atmosphere based on amber.” That’s a basic explanation of what Nostalgic Negative is.
I didn’t count, but I’d estimate that I found about 20 examples of the Nostalgic Negative film simulation on the internet. I noticed that there were some large discrepancies between the pictures, as some looked much different than others. I wondered if the default settings were used on some images and not others, and if some of them weren’t straight-out-of-camera but had received some level of post-processing. I also wondered if Nostalgic Negative behaves similarly to Classic Negative in that the aesthetic changes a little depending on the exposure. There’s a lot of uncertainty to what exactly the new film simulation looks like. Overall, I think you can expect something along the lines of Eterna gradation, the Classic Chrome color palette (however, with a warm shift), and vibrancy a little beyond Astia. Low-contrast, high-saturation and warm is a quick synopsis of Nostalgic Negative.
Reflected Red – Farmington, UT – Fujifilm X100V – “Nostalgic Negative”
Interestingly, there are some already existing film simulation recipes that come close to Nostalgic Negative. My Eterna recipe (and there are versions for X-Trans II, X-Trans III and X-Trans IV cameras) is almost identical to one of the aesthetics that I found in the sample pictures. The contrast is likely slightly too high in those recipes, but it’s very close. For some other sample pictures, I thought that the Kodachrome 64 recipes (the X-T1 recipe, the X-T30 recipe and the X100V recipe, but especially the X100V version) are pretty darn close. For some other pictures, the Kodak Vision3 250D recipe looks quite similar, while this Kodacolor recipe looks close to some others. I think that my Kodak Gold, Kodachrome II, Kodak Ultramax (both for X-Trans III and X-Trans IV), Kodak Ektar, Kodak Portra 800, Kodak Portra 400 (both X-T30 and X100V), Kodak Portra 400 v2 (both the X-T30 recipe that’s only available right now to Patrons on Fuji X Weekly App and X100V), and Polaroid (although perhaps increase Color) have some similarities to Nostalgic Negative. If you have an X-Trans II, III or IV camera, you already have some options that are in the neighborhood of this new film simulation, so don’t fret that your camera doesn’t have it. You’ll just have to decide which option you like best.
Speaking of your camera not having Nostalgic Negative: it’s not coming to X-Trans IV, in my opinion. Fujifilm said, “For Nostalgic Negative, Fujifilm needs a large sensor. It can’t be implemented simply to APS-C. Fujifilm needs time to develop Nostalgic Negative for the APS-C system.” To me, that’s code-speak for, “Expect it on X-Trans V cameras.” Of course, Fujifilm hasn’t announced that sensor yet, so they can’t talk about it, but that’s where I would expect to see it.
I don’t know if this new recipe that I created will turn out to be accurate to Nostalgic Negative. Most likely not, but I hope that you like it anyway. I chose Clarity -5 because that’s the best I could do for imitating the gradation of Eterna, but feel free to use -4 or -3 if you feel that -5 is too much for your tastes. On cameras that can adjust by .5, I would consider setting Shadow to -0.5 instead of 0. This recipe is only compatible with the Fujifilm X100V, X-Pro3, X-T4, X-S10 and (the upcoming) X-E4.
Classic Chrome Dynamic Range: DR200 Highlight: -1 Shadow: 0 Color: +4 Noise Reduction: -4 Sharpening: 0 Clarity: -5 Grain Effect: Weak, Large Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto, +3 Red & -5 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this new “Nostalgic Negative” film simulation recipe on my Fujifilm X100V:
Red Soccer Ball – Farmington, UT – Fujifilm X100V
Suburban Sky – Farmington, UT – Fujifilm X100V
Sky & Garages – Farmington, UT – Fujifilm X100V
JP Elect – Farmington, UT – Fujifilm X100V
Bear in the Snow – Layton, UT – Fujifilm X100V
Boy & Bear – Layton, UT – Fujifilm X100V
RedBrick Building – Salt Lake City, UT – Fujifilm X100V
Waiting Girl – Farmington, UT – Fujifilm X100V
City Fountain – Farmington, UT – Fujifilm X100V
Last Light Through Reeds – Farmington, UT – Fujifilm X100V
Mirror Image – Orem, UT – Fujifilm X100V
Window Light on Chair – Farmington, UT – Fujifilm X100V
Joshua’s Space – Farmington, UT – Fujifilm X100V
X-T1 on a Shelf – Farmington, UT – Fujifilm X100V
Film Drawer – Farmington, UT – Fujifilm X100V
Colorful Pens – Farmington, UT – Fujifilm X100V
Garage Globe – Farmington, UT – Fujifilm X100V
Jon’s Hands – Farmington, UT – Fujifilm X100V
Evening Park Joy – Farmington, UT – Fujifilm X100V
Rainbow Rays – Farmington, UT – Fujifilm X100V
Autumn Sun – Farmington, UT – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
My wife, Amanda, has a Fujifilm X-T4. She uses it for both stills and video. Amanda pretty much runs the video side of Fuji X Weekly, as that’s something she’s good at, but she also does some occasional portrait and product photography. A few days ago she borrowed my Fujinon 90mm lens, attached it to her X-T4, and on a snowy morning captured some pictures of our kids sledding at a local park (I was shooting with a GFX-50S, you can see some of those pictures here).
Amanda showed me the photographs that she had captured, and I liked the picture aesthetic, so I asked her what settings she used. She told me she just picked some that she thought might look nice, and went with that. She made her own recipe! It’s based on Classic Negative, which is such a great film simulation. I asked her if I could share her pictures and recipe here, and she agreed. Thanks, Amanda!
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
This film simulation recipe is only compatible with the Fujifilm X-T4 and X-S10 (most likely the X-E4, too, when that comes out next month). If you like this recipe or these pictures, be sure to let Amanda know by leaving her a comment.
Classic Negative Dynamic Range: DR200 Highlight: +1 Shadow: +1.5 Color: +3 Noise Reduction: -4 Sharpening: +1 Clarity: 0 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: Auto, 0 Red & 0 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1
All of the pictures in this article are camera-made JPEGs captured by Amanda Roesch using this Classic Negative film simulation recipe on her Fujifilm X-T4.
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
Fujifilm X-T4 & Fujinon 90mm – Photo by Amanda Roesch
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Ektachrome is a brand of Kodak color transparency film that’s been around (off and on) since the 1940’s. There have been several eras of the film, and even more variations; the name Ektachrome has been given to many different emulsions. While Kodachrome was more iconic, Ektachrome was more widely used, thanks in part to its easier development process and (typically) faster ISOs. While Ektachrome was more popular, it was much more prone to color fading. Kodachrome was a tad warmer, while Ektachrome was a tad more vibrant, depending on the version, of course. I shot plenty of rolls, and several different versions, of Ektachrome back in the day.
The Classic Chrome film simulation is, I believe, largely based on Ektachrome; set to defaults, Classic Chrome has a similar aesthetic to the film. I tweaked the settings so that Classic Chrome would more closely resemble Ektachrome, but I used my memory of the film and didn’t study actual examples of it. Fujifilm has a term for this: memory color. It basically means that it’s more important to have the right feel than to be perfectly accurate. I’m not exactly sure how accurate this recipe is to the film, or which exact emulsion it would be closest to (maybe 100G? 100GX?), but it feels right to me.
Winter Tree – Farmington, UT – Fujifilm GFX-50S – “Ektachrome”
This Ektachrome film simulation is intended for GFX cameras. I know that it’s compatible the GFX-50S and GFX-50R, and I believe that it’s compatible with the GFX100, but I’m not 100% certain. You can also use it on the Fujifilm X-T3 and X-T30, and it will produce nearly identical results; on the X100V, X-T4, X-Pro3 and X-S10, set Clarity to 0 (or -2 if you prefer), Color Chrome FX Blue Off, and Grain to Weak Small.
Classic Chrome Dynamic Range: DR400 Highlight: +1 Shadow: +1 Color: +3 Color Chrome Effect: Weak Sharpening: +1 Noise Reduction: -4 Grain Effect: Weak White Balance: 7100K, -6 Red & +5 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Sample photographs, all camera-made JPEGs, captured with a Fujifilm GFX-50S using this Ektachrome recipe:
Forest Creek – Farmington, UT – Fujifilm GFX-50S
Log Chair Boy – Farmington, UT – Fujifilm GFX-50S
Three Poles – Farmington, UT – Fujifilm GFX-50S
Pole Twists – Layton, UT – Fujifilm GFX-50S
End Post – Layton, UT – Fujifilm GFX-50S
Boardwalk in the Marsh – Layton, UT – Fujifilm GFX-50S – “Ektachrome”
The Roundabout – Layton, UT – Fujifilm GFX-50S
Signs Along the Boardwalk – Layton, UT – Fujifilm GFX-50S
Ice Tracks in the Reeds – Layton, UT – Fujifilm GFX-50S
Marsh Ice Tracks – Layton, UT – Fujifilm GFX-50S
Hairpin Curve – Layton, UT – Fujifilm GFX-50S
Birdseye View – Layton, UT – Fujifilm GFX-50S
Rural Boardwalk – Layton, UT – Fujifilm GFX-50S
Fence in the Grass – Layton, UT – Fujifilm GFX-50S
Tiny Islands in a Frozen Pond – Layton, UT – Fujifilm GFX-50S
Winter Grass – Layton, UT – Fujifilm GFX-50S
Frozen March Water – Layton, UT – Fujifilm GFX-50S
Cold Marsh – Farmington, UT – Fujifilm GFX-50S
Reed & Snow – Farmington, UT – Fujifilm GFX-50S
Snow Day Girl – Farmington, UT – Fujifilm GFX-50S
Sled Hill Photography – Farmington, UT – Fujifilm GFX-50S
Needle Snow – Farmington, UT – Fujifilm GFX-50S
Winter Pine – Farmington, UT – Fujifilm GFX-50S
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
760 – Farmington, UT – Fujifilm X100V – “Ilford Ortho Plus 80”
Many years ago I used to develop my own black-and-white film. It required removing the film from the cassette, winding it around a developing reel, and placing the reel into a developing canister—all in complete darkness! It was very tricky. If you didn’t get the film wound onto the reel quite right, it could ruin the film during development. When people think of darkrooms, they often think of dipping photosensitive papers into tubs of chemicals in dim amber light. This red light is called a safelight, and it’s safe for photographic paper, but not safe for undeveloped photographic film—that’s why you have to get the film from the cassette to the canister in complete darkness.
Ilford Ortho Plus 80 film is different, as it’s orthochromatic, which means it’s sensitive to blue and green light but not red, making it possible to transfer the film from the cassette to the canister under a safelight. This film was introduced in 2019, so it hasn’t been around very long. It produces sharp, fine-grain images that are fairly contrasty for a low-ISO film, and reds will be rendered dark. I’ve never used this film myself, so I relied on pictures I found on the internet to create this recipe. With film, how it’s shot, developed, and printed or scanned can have a big impact on how it looks, and that’s certainly a challenge for creating a facsimile on Fujifilm cameras, but I think this one is pretty close from the pictures I’ve seen. It also seems to be in the neighborhood of Washi S 50.
Monochrome Country – Salt Lake City, UT – Fujifilm X100V – “Ilford Ortho Plus 80
I set Monochromatic Color (Toning) to WC +1 because many of the examples that I found had some warm toning (not sure if it’s in-software after scanning or from toned prints or both), but it’s completely optional, you can set WC to 0 if you prefer. This recipe is intended for newer X-Trans IV cameras, such as the Fujifilm X100V, X-T4, X-Pro3 and X-S10, and isn’t compatible with other cameras; however, if you disregard Clarity you can achieve something similar on the X-T3 and X-T30, but it won’t be exactly the same (feel free to try).
Monochrome+G Dynamic Range: DR400 Highlight: +2 Shadow: +3 Noise Reduction: -4 Sharpening: +2 Clarity: -2 Toning: WC +1, MG 0 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Off White Balance: 7000K, -5 Red & 0 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this Ilford Ortho Plus 80 film simulation recipe on my Fujifilm X100V:
Thorns of Nature – Farmington, UT – Fujifilm X100V
Monochrome Berries – Farmington, UT – Fujifilm X100V
Icy River – Farmington, UT – Fujifilm X100V
Zipping – Farmington, UT – Fujifilm X100V
Playground Boy – Farmington, UT – Fujifilm X100V
Silhouette Playground – Farmington, UT – Fujifilm X100V
Canvas Moon – Farmington, UT – Fujifilm X100V
Cat & Salmon – Salt Lake City, UT – Fujifilm X100V
Fedex Delivery – Farmington, UT – Fujifilm X100V
Locked Box – Farmington, UT – Fujifilm X100V
Emotion Through Glass – Farmington, UT – Fujifilm X100V
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Cradle Tree Branch – Farmington, UT – Fujifilm X-M1 – “Provia”
There’s a new Fuji X Weekly Patron early-access film simulation recipe available now on the Fuji X Weekly app! If you are a Patron, you can use it today! This new recipe is for X-Trans I cameras (X-E1, X-Pro1 and X-M1), and it replaces the Classic Analog recipe, which was a Patron early-access recipe, but is now available to everyone. Yea!
Below are a few examples of this new recipe, which is simply called Provia, captured with a Fujifilm X-M1. Bricks in the Wall (below) was captured by my daughter, Joy, who I let use the camera.
Sun over Country Horses – Farmington, UT – Fujifilm X-M1
Target – Farmington, UT – Fujifilm X-M1
Bricks in the Wall – Farmington, UT – Fujifilm X-M1 – Photo by Joy Roesch
I wanted to create a Portra recipe for X-Trans I cameras, such as the Fujifilm X-M1. All of my Portra recipes are based on the Classic Chrome film simulation, but X-Trans I cameras don’t have Classic Chrome. I did create a recipe for mimicking Kodachrome without Classic Chrome, but that’s intended for X-Trans II cameras, and, while the results are similar, it doesn’t look exactly the same on X-Trans I. This recipe was my attempt at Portra without Classic Chrome, but it’s not quite Portra enough for me to name it Portra. It’s close but no cigar, but it does look nice nonetheless, and I like how it renders pictures on my X-M1.
This was a Patron early-access recipe on the Fuji X Weekly app. Fuji X Weekly Patrons have had the opportunity to use it since December 1st, but now it’s available to everyone! There’s a new Patron early-access recipe for X-Trans I on the app in its place. If you have the app, go check it out!
E.T. – Farmington, UT – Fujifilm X-M1 – “Classic Analog”
This recipe also marks the first one that includes a photograph captured by my 11-year-old son, Jonathan. I let him use my X-M1, and I liked one of the pictures he made, which you’ll find further down this article, entitled Frozen Pond Scum. The Fujifilm X-M1 can be found for cheap, and would make a great “first real camera” for a kid. Maybe I’ll give him mine at some point in the future.
Provia/STD Dynamic Range: DR400 Highlight: -2 Shadow: -1 Color: -2 Sharpness: 0 Noise Reduction: -2 White Balance: Daylight/Fine, +1 Red & -6 Blue ISO: Auto, up to ISO 3200 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs made using this Classic Analog film simulation recipe on a Fujifilm X-M1:
Thin Ice – Farmington, UT – Fujifilm X-M1
Falling Water – Farmington, UT – Fujifilm X-M1
Autumn Overcast – Farmington, UT – Fujifilm X-M1
Night at the Lake – Farmington, UT – Fujifilm X-M1
Frozen Drain – Farmington, UT – Fujifilm X-M1
Frozen Pond Scum – Farmington, UT – Fujifilm X-M1 – Photo by Jonathan Roesch
Irrigation Cover – Farmington, UT – Fujifilm X-M1
Quadruple U’s – Farmington, UT – Fujifilm X-M1
Improbable – Farmington, UT – Fujifilm X-M1
Evening Euonymus – Farmington, UT – Fujifilm X-M1
Blue Sky Reeds – Farmington, UT – Fujifilm X-M1
Yellow, Lamp – Farmington, UT – Fujifilm X-M1
Help Fuji X Weekly
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
January Forest – Farmington, UT – Fujifilm GFX-50S – “Classic Negative Industrial”
One of my favorite film simulation recipes is Fujicolor 100 Industrial, which is intended for Fujifilm X-T30 and X-T3 cameras. X-Trans IV recipes for the X-T30 and X-T3 plus X-Trans III recipes are compatible with the GFX-50S, but the results seem to be very slightly different. I programmed the Fujicolor 100 Industrial recipe into the GFX-50S. Later I updated the firmware, which added the Classic Negative film simulation; it just so happened that the Fujicolor 100 Industrial recipe was selected, and I changed the film simulation from PRO Neg. Std to Classic Negative with this recipe still programmed. I immediately loved the results!
This film simulation recipe, with Classic Negative instead of PRO Neg. Std, doesn’t mimic real Fujicolor 100 Industrial film as well as the original recipe, I don’t think, but the results are pretty nice nonetheless. It can be magical! It’s not a recipe for every situation, but it is indeed beautiful in the right situations. It’s a very happy accident!
Forest Creek – Farmington, UT – Fujifilm GFX-50S – “Classic Negative Industrial”
I believe that this film simulation recipe is compatible with all GFX cameras, although I’m not completely sure about the GFX100 (it should be). It cannot be used on the X-T30 and X-T3 because those cameras don’t have Classic Negative, but it can be used on other X-Trans IV cameras (X100V, X-Pro3, X-T4 and X-S10) by selecting Color Chrome FX Blue Off, Clarity 0 (or maybe -2), and Grain Weak + Small; however, results will be slightly different. I tried it on my Fujifilm X100V and it did, in fact, look good, but it’s really intended for GFX cameras.
Classic Negative Dynamic Range: DR400 Highlight: +1 Shadow: +2 Color: +1 Color Chrome Effect: Weak Sharpening: +1 Noise Reduction: -4 Grain Effect: Weak White Balance: 3200K, +8 Red & -8 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Sample photographs, all camera-made JPEGs, captured with a Fujifilm GFX-50S using this Classic Negative Industrial recipe:
Tunnel Silhouette – Farmington, UT – Fujifilm GFX-50S
Pedestrian Tunnel – Farmington, UT – Fujifilm GFX-50S
Manhole Cover – Farmington, UT – Fujifilm GFX-50S
No Parking Any Time – Farmington, UT – Fujifilm GFX-50S
Flasher – Farmington, UT – Fujifilm GFX-50S
Fallen Tree on Frozen Lake – Farmington, UT – Fujifilm GFX-50S
Smiling Jo – Farmington, UT – Fujifilm GFX-50S
January Sun in the Forest – Farmington, UT – Fujifilm GFX-50S
Backlit – Farmington, UT – Fujifilm GFX-50S
Creekside Trail – Farmington, UT – Fujifilm GFX-50S
Vines on Trees – Farmington, UT – Fujifilm GFX-50S
Spiky Leaves – Farmington, UT – Fujifilm GFX-50S
Sunlight Trail – Farmington, UT – Fujifilm GFX-50S
Brown Among Green – Farmington, UT – Fujifilm GFX-50S
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Here are the Top 20 most popular film simulation recipes of 2020! I used page views to rank these recipes. Those with Kodak, Kodachrome or Portra in the name are quite popular. More than half of these use Classic Chrome as the base. It’s interesting to compare these to the 12 most popular recipes of December 2020. Only one black-and-white recipe made this list, which isn’t too surprising because color is more popular than monochrome. No Bayer, X-Trans I or X-Trans II recipes found their way into the top 20, only X-Trans III and X-Trans IV.
Without further ado, here are the Top 20 most popular film simulation recipes of 2020:
Signs, Poles & Wires – Farmington, UT – Fujifilm X100V – “Classic Monochrome”
For some reason, black-and-white film simulation recipesaren’t as popular as color, but Fujifilm cameras are capable of some great monochrome images straight-out-of-camera. This new “Classic Monochrome” recipe was made by Thomas Schwab (B&W Instagram), who has created several of the film simulation recipes on this website and collaborated on several others. He’s a friend of this blog, and I’m honored that he allows me to share his recipes here!
Thomas said that he started with one of the Ilford recipes, and this evolved from that. It’s called “Classic Monochrome” because it has a great old-school B&W print feel. The only change that I added was Toning, which is optional, but it seems to look nice with these settings. This recipe has quickly become one of my favorite black-and-white options! It’s most similar to Dramatic Monochrome, so if you like that recipe you’ll like this one, too. Thank you, Thomas!
This recipe is contrasty and clean. It reminds me of Agfapan 25 printed using a high-contrast filter (maybe a #4, or even split-filtered). It’s not intended to look like it, but that’s what it reminds me of. It does have a limited dynamic range, and it’s easy to clip highlights, so the exposure should be carefully considered, or perhaps try DR-Auto if you are concerned. It’s compatible (as of this writing) with the Fujifilm X100V, X-T4, X-Pro3 and X-S10 cameras.
Monochrome (+Y, +R, +G) Dynamic Range: DR100 Highlight: +4 Shadow: +2 Noise Reduction: -4 Sharpening: +1 Clarity: +4 Toning: WC +1, MG 0 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Auto, 0 Red & 0 Blue ISO: Auto, up to ISO 12800 Exposure Compensation: -1/3 to +1/3 (typically)
Example photographs, all camera-made JPEGs using this Classic Monochrome film simulation recipe on my Fujifilm X100V:
Marks the Spot – Farmington, UT – Fujifilm X100V
Main Line Trail – Farmington, UT – Fujifilm X100V
Empty Box – Farmington, UT – Fujifilm X100V
Empty Bench – Farmington, UT – Fujifilm X100V
Joshua Biking – Farmington, UT – Fujifilm X100V
Girl & Bike – Farmington, UT – Fujifilm X100V
Horses & Ducks – Farmington, UT – Fujifilm X100V
Country Road Bus – Farmington, UT – Fujifilm X100V
No Motor Vehicles – Farmington, UT – Fujifilm X100V
Weed 1 – Farmington, UT – Fujifilm X100V
Weed 2 – Farmington, UT – Fujifilm X100V
Ice Abstract 1 – Farmington, UT – Fujifilm X100V
Ice Abstract 2 – Farmington, UT – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
I ran across a picture in an article about coffee, and that picture reminded me a lot of the Classic Negative film simulation. I don’t think the picture was captured with Classic Negative; perhaps a VSCO (or some other brand) preset was used that was intended to look something like Superia film. So, with one picture as my guide, I set out to recreate the look with my Fujifilm X100V. Ideally you want more than one sample picture to study, but that’s all I had. These settings look pretty darn close to that picture, but it’s difficult to know if it’s truly accurate because I only had one sample to work with, and I don’t know how it should look in various situations. Still, I’m happy with how it turned out.
Initially I was going to name this recipe “Fujicolor Negative” because it has a Fujicolor Superia-like look, but then I stumbled across some Kodak ColorPlus 400 photographs, and they looked quite similar to these pictures. Even though the resemblance to ColorPlus 400 is completely accidental, I thought that calling it “Color Negative 400” was more appropriate because it is in the general ballpark of a film that’s not Fujicolor. Or, more accurately, it is similar to both a Kodak stock and a Fujifilm stock, and not exactly like either. I do think, no matter how close it may or may not be to an actual film, it has a nice film-like aesthetic to it that many will appreciate.
This recipe is dark and contrasty, and can be used to create a certain moody look. I think it works best in low-contrast scenes, and does well both indoors and outdoors. This recipe is only compatible (as of this writing) with the Fujifilm X100V, X-Pro3, X-T4 and X-S10 cameras.
Classic Negative Dynamic Range: DR400 Highlight: 0 Shadow: +4 Color: +4 Noise Reduction: -4 Sharpening: 0 Clarity: -5 Grain Effect: Weak, Large Color Chrome Effect: Weak Color Chrome Effect Blue: Weak White Balance: Auto, -2 Red & -4 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this Color Negative 400 film simulation recipe on my Fujifilm X100V:
Succulent Faux – Farmington, UT – Fujifilm X100V
Fabric Leaf – Farmington, UT – Fujifilm X100V
Holga 120N & Ilford HP5 Plus – Farmington, UT – Fujifilm X100V
Table Bolsey – Farmington, UT – Fujifilm X100V
ThreeIndoor Plants – Farmington, UT – Fujifilm X100V
Face Masks Are Required – Farmington, UT – Fujifilm X100V
Speed Stars – Farmington, UT – Fujifilm X100V
Fish on a Wall – Farmington, UT – Fujifilm X100V
Waiting for Fish – Farmington, UT – Fujifilm X100V
Contemplation – Farmington, UT – Fujifilm X100V
Stroller Ride – Farmington, UT – Fujifilm X100V
Leaning into the Frame – Farmington, UT – Fujifilm X100V
Bicycle Here – Farmington, UT – Fujifilm X100V
Birds in a Dormant Tree – Farmington, UT – Fujifilm X100V
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
This new Kodak Portra 400 Warm recipe came about after the Kyle McDougall Portra-Style comparison article. These settings are an attempt to get closer to Kyle’s preset aesthetic. Some film simulation recipes are good for everyday use, some are good only in the right situation. This is one falls into the latter category, I think. This one isn’t for everyone or every situation, but for some people in the right situations, this recipe will be greatly loved! I think it looks best in sunny daylight, but can produce interesting results sometimes in other lighting situations, too.
If you aren’t a Patron, don’t worry. Like all of the early-access recipes, this one will eventually be made available to everyone. Just have patience. If you have the app but aren’t a Patron, yet you want to use this recipe, you can either wait for it to become free or become a Patron and help support the great things that are happening here! Really, Patrons are the ones who are making so much happen because I can’t do it on my own. If you are a Patron, thank you so much for your support!
Beer & Wings – Salt Lake City, UT – Fujifilm X100V – “Kodak Portra 400 Warm”
Bright Yellow House – Farmington, UT – Fujifilm X100V – “Kodak Portra 400 Warm”
Sage Sunset – Antelope Island SP, UT – Fujifilm X100V – “Kodak Portra 400 v2”
One film can have many different looks depending on how it’s shot, developed, scanned or printed. This new Portra 400 film simulation recipe, called Kodak Portra 400 v2, is an alternative aesthetic, created by studying examples of actual Portra 400 film (thanks to Julien Jarry). The “other” Fujifilm X100V Kodak Portra 400 recipe was also created by studying examples of actual film (thanks to Thomas Schwab). They’re both good options for achieving a Portra look, and neither is more “right” than the other.
This isn’t exactly a brand-new recipe. It was published as a Patron early-access recipe on the Fuji X Weekly App back on December 1st, and now another early-access recipe has replaced it, so this one is now available to everyone! You might remember that this Kodak Porta 400 v2 recipe was mentioned in the Kyle McDougall preset comparison article.
Ford Truck – Centerville, UT – Fujifilm X100V – “Kodak Portra 400 v2”
If you like my other Portra recipes, you’re sure to like this one, too. Because it uses Clarity, it slows down the camera considerably. I hope that Fujifilm speeds this up with a firmware update at some point, but in the meantime, if you can, my recommendation is to embrace the slowdown. This recipe is only compatible with the latest Fujifilm X cameras: the X-Pro3, X100V, X-T4 and X-S10.
Classic Chrome Dynamic Range: DR400 Highlight: 0 Shadow: -2 Color: +2 Noise Reduction: -4 Sharpening: -2 Clarity: -2 Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: 5200K, +1 Red & -6 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this new Kodak Portra 400 v2 film simulation recipe on my Fujifilm X100V:
Stacked Pallets – Farmington, UT – Fujifilm X100V
Now Hiring – Centerville, UT – Fujifilm X100V
Double-Double – Centerville, UT – Fujifilm X100V
Burger Roof – Centerville, UT – Fujifilm X100V
Julien Jarry with RED Camera – Antelope Island SP, UT – Fujifilm X100V
Julien Filming – Antelope Island SP, UT – Fujifilm X100V
Yellow Rabbitbrush – Antelope Island SP, UT – Fujifilm X100V
Frary Peak Peeking – Antelope Island SP, UT – Fujifilm X100V
Desert Brush – Antelope Island SP, UT – Fujifilm X100V
Light Log – Big Fork, MT – Fujifilm X100V
Sunlight Through the Forest Trees – Big Arm, MT – Fujifilm X100V
One Lane Bridge – Big Fork, MT – Fujifilm X100V
String of Lightbulbs – Flathead Lake, MT – Fujifilm X100V
Dock at Night – Flathead Lake, MT – Fujifilm X100V
Moon Over RV – Antelope Island SP, UT – Fujifilm X100V
Sunset RED – Antelope Island SP, UT – Fujifilm X100V
Buffalo Point Sunset – Antelope Island SP, UT – Fujifilm X100V
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Here’s a quick update: The Android version of the app is being worked on and progress is so far going quite well. I’m hoping that it will be available before March, but there’s still a long ways to go before it’s done, so it’s hard to say for sure when it will be released. The Fuji X Weekly Patrons are the ones who are making this happen, and the Android app would be nowhere close to where it is now without the Patrons. Your support is going to produce some amazing things that would not be possible without you. Thank you, Patrons!
Once the Android version is out, the next big thing is an update that will bring new features and functionality to the app. Some things will be made available to everyone, and some things will be made available only to Patrons, and some current Patron-only features will be unlocked for everyone. I don’t know how long it will take to get the update up and running, but I’m really hoping it can be done before the summer.
The Fuji X Weekly app has been downloaded 20,000 times! That’s incredible! I’m happy to provide this free resource to you, and it will only get better and better! I’m extremely appreciative of all the Patrons, because without your support none of this would be possible. We all owe you a debt of gratitude! I want to give a big “thank you” to those who have downloaded the app, to those who have shared the app on their websites and social media, and especially to all the Patrons!
I believe that it’s often better to spend money on experiences rather than new gear. Sometimes a book can be just as good as an experience; perhaps it can be an experience in and of itself. For Christmas my family gifted me three photography books, each one featuring the legendary photographer Ansel Adams. One of the three books was especially surprising: Polaroid Land Photography by Ansel Adams.
Did you know that Ansel Adams, the renown black-and-white landscape photographer who invented the Zone System and who was celebrated for his darkroom mastery, loved Polaroid photography? I didn’t. I was surprised to learn that one of his well-known Yosemite pictures was a Polaroid (Type 55), and this picture was found in one of the other two books I was gifted. Adams’ Polaroid book is a thorough and highly technical look at instant film. It’s the ultimate guide to Polaroid, at least from 1978 when this second edition was published. I want to share a few quotes from the book, then circle it back to this blog and Fujifilm.
“It is unfortunate that so many photographers have thought of the Land camera as a ‘toy,’ a casual device for ‘fun’ pictures, or, at best, a gadget to make record pictures! The process has revolutionized the art and craft of photography….”
—Ansel Adams
It’s clear right from the beginning of the book that Adams considered the Polaroid camera a serious photographic tool. He felt it was under-appreciated and underutilized by the photographic community at large.
“By making it possible for the photographer to observe his work and his subject simultaneously, and by removing most of the manipulative barriers between the photographer and the photograph, it is hoped that many of the satisfactions of working in the early arts can be brought to a new group of photographers. The process must be concealed from—non-existent for—the photographer, who by definition need think of the art in taking and not in making photographs. In short, all that should be necessary to get a good picture is to take a good picture, and our task is to make that possible.”
—Edwin H Land, co-founder of Polaroid
Adams included that Edward Land quote in Chapter 13, Principles of One-Step Photography, and he immediately followed it with this:
“The effect of one-step processing on both amateur and professional creative photography has been revolutionary.”
—Ansel Adams
Polaroid Land Photography is an extensive user’s manual—Adams referred to it as such many times—yet it is full of inspiration, both in written words and great photography. There is so much that I could quote, but I will refrain myself and add just one more.
“As with all art forms, we must accept the limitations of the medium as well as revel in the advantages.”
—Ansel Adams
I was reading all this as I was simultaneously celebrating the fact that I had so easily finished the pictures of my kids opening their Christmas presents. By finished, I mean finished. I captured the pictures, and in the time it takes most people to load their RAW files onto their PC or Mac, I had already uploaded them to my phone, put them into storage, and shared them to loved ones. Done. It occurred to me that this is the modern equivalent of one-step processing.
Over the last several months I have been pondering why my different film simulation recipes are so popular. Tens of thousands of photographers across the globe, from newbies to experienced pros, are using these camera settings on their Fujifilm cameras. I get feedback daily from people telling me how these recipes have changed their photographic lives. There’s been a very real impact that this blog has had on the photography continuum. Yet the why has been illusive to me, until today.
Polaroid changed photography 50, 60, 70 years ago. The biggest name in photography not only embraced it but called it revolutionary. There are a few parallels to Polaroid cameras and film simulation recipes on Fujifilm X cameras, but the biggest is perhaps one-step processing. Yes, if you shoot RAW+JPEG, you can always reprocess the RAW, but there is fun in not having to do so if you don’t want to. There’s a certain satisfaction, not to mention time saved, in having a completed picture right out of camera that needs no editing, or maybe only some small, quick adjustments. I wonder if Ansel Adams were still around today, if he would embrace the film simulation recipe the same as he did the Polaroid. Honestly, the answer isn’t important, because so many photographers are embracing it, and it’s revolutionizing photography.
Photography vloggers and bloggers Leigh and Raymond of The Snap Chick (YouTube, Blog, Instagram) just published a video about Fuji X Weekly! Even better, I’m in it! Be sure to watch it if you have 10 minutes to spare. Maybe you can relate to their experience. I love hearing stories where this website (and also now the app) has a real impact on people’s photography. Leave a comment, I’d love to hear your story!
LomoChrome Metropolis recipe, using the Eterna Bleach Bypass film simulation
My wife has a Fujifilm X-T4, and I was able to borrow it briefly for an experiment with the new Eterna Bleach Bypass film simulation. The X-T4 and the X-S10 are currently the only cameras that have this film simulation. My new LomoChrome Metropolis recipe, which is currently only found on the Fuji X Weekly App for iOS, uses Eterna Bleach Bypass.
I snapped the picture below of my daughter using the Fujifilm X-T4 and the Eterna Bleach Bypass film simulation. Highlight, Shadow and Color were set to 0, using Auto White Balance, and pretty much everything set to defaults.
Eterna Bleach Bypass
I reprocessed the RAW file in-camera, and tried to (in a short period of time) recreate Eterna Bleach Bypass using regular ol’ Eterna. I set Highlight to +4, Shadow to +3, Color to -4, and set a shift of -2 Red and -3 Blue to the Auto White Balance, which roughly gets you close. If I had more time I could get closer, but this was just a quick experiment. The takeaway is that Eterna Bleach Bypass is essentially Eterna but with more contrast and less color saturation, and some other small differences.
“Eterna Bleach Bypass” using Eterna
Below I reprocessed the RAW file in-camera using my Bleach Bypass film simulation recipe that uses Classic Negative. That recipe wasn’t intended to mimic the Eterna Bleach Bypass film simulation, but actual bleach bypassed film. It looks kind of like the new film simulation, but with more contrast and saturation.
“Bleach Bypass” using Classic Negative
There was an interview published recently in Japan where a couple of Fujifilm managers explained a bunch of different things about Fujifilm cameras. Between the translation and my interpretation of that translation, I mistakenly thought that it said a Bleach Bypass look could be achieved using the Provia film simulation with Highlight set to +1, Shadow set to +3 and Color set to -4, so I reprocessed the RAW file in-camera doing this, which is below.
“Bleach Bypass” using Provia?
Obviously that doesn’t look right, so I reread the quote, and realized what it actually said was that the Eterna Bleach Bypass film simulation recipe is intended to mimic cinematic film (for cinematic purposes) that’s skipped the bleach during development. Bleach bypass for still photography is (or often is) not the same—different film and/or different process. What was being said by those Fujifilm managers is to mimic bleach bypass for still photography, use the Eterna Bleach Bypass film simulation (not Provia) with Highlight set to +1, Shadow set to +3, and color Set to -4. An example of that is below.
Eterna Bleach Bypass with more contrast and less saturation
Bleach bypass is a darkroom technique where you skip or limit the bleach during development of color film, which causes it to retain the silver. Results will vary greatly depending on the film used and exactly how you develop it, but generally speaking what you get with bleach bypass is a high-contrast, low-saturation, grainy picture that appears as if a black-and-white and color picture were combined together. This technique is more common for motion picture film than still photography, but some people do bleach bypass with C-41 film.
There’s no one exact aesthetic for bleach bypass. The Eterna Bleach Bypass film simulation is a great starting point, and I plan to experiment more with it and create at least a few different film simulation recipes using it. Classic Negative can also be used, and maybe even Classic Chrome and PRO Neg. Hi (and perhaps others), just depending on the exact bleach bypass look you are after. While more complicated, you can use the double-exposure feature to create a bleach bypass look. There’s not necessarily a right or wrong way, or even a right or wrong look, which makes experimentation more fun. I invite you to pick a film simulation (whether or not your camera has the new Eterna Bleach Bypass film simulation), turn up the contrast and turn down the color saturation, and see what you can create!
The Fuji X Weekly App for iOS has been out for one week! It really has been an amazing seven days.
I want to say Thank You to everyone who has downloaded the app! I hope that it’s a useful tool for your photography. I appreciate everyone who has shared it on their social media. I’m grateful for those who left such positive reviews in the app store! The feedback and suggestions that I’ve received are invaluable. You all are the best part of the Fujifilm community!
I want to give a very special Thank You to those who are Fuji X Weekly Patrons! There’s a little bit of an immediate reward you received because you unlocked some features that give you the best app experience. But, more importantly, is the reward that you don’t yet see! The Fuji X Weekly App, as it is now, is just the beginning. There’s so much more coming, and it’s only possible because of Patrons!
An Android version of the app is being worked on, and I’m concentrating my efforts on getting it out as quickly as possible. It’s coming! But the road is still long, and I can’t say when it will be ready. Because of Fuji X Weekly Patrons, this version of the app will be out more quickly than I originally anticipated. Yea!
Once that’s complete, we will begin working on some updates to the Fuji X Weekly App that will add new features, functionality and other improvements. There will be some really interesting changes, with additions to both the free and Patron sides. The app will become better, and more fun! I can’t give you the details yet, but I can say that you’ll love it and Patrons are the ones making it possible. Thank you!
If you have an iPhone or iPad and haven’t yet downloaded the Fuji X Weekly App, you should go to the app store now and do so! If you have the app and find it useful, let me know in the comments!
After publishing film simulation recipes for Superia 100, Superia Xtra 400, Superia 800 and Superia 1600 film stocks, as well as Reala 100 and Luis Costa’s Classic Negative (which are both in the Superia realm), I’ve been asked a few times to create a Superia Premium 400 recipe. I’ve never shot actual Premium 400 film, and had to rely on the internet, which isn’t ideal, especially since there are limited examples for this particular film, but I think these settings are pretty good.
Superia Premium 400 is a variant of Superia Xtra 400, sold only in Japan, intended to better replicate Japanese skin tones. It seems to have more of an orange color-cast. Premium 400 doesn’t have the “4th cyan color layer” that every other Superia film has, and that seems to be the biggest difference between it and Xtra 400. The way that this recipe came about is a Fuji X Weekly reader (sorry, I forgot who, and I can’t find the message) sent me his or her best guess of some settings to replicate Premium 400, and wanted advice on how to improve it. I took a look, made some changes, and sent it back, but it wasn’t right, so I kept working on it. After a couple weeks of experimenting, I settled on these settings, which I’m quite satisfied with.
Amanda’s Camera – Farmington, UT – Fujifilm X100V – “Superia Premium 400”
There are a whole bunch of options for achieving a Superia look with your Fujifilm camera. Even though this recipe is based on a more obscure variation, the results are quite interesting, and I think a lot of people are going to really appreciate it. It’s compatible with the Fujifilm X100V, X-Pro3, X-T4 and X-S10 cameras.
Classic Negative Dynamic Range: DR200 Highlight: -2 Shadow: 0 Color: +4 Noise Reduction: -4 Sharpening: -1 Clarity: -2 Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Weak White Balance: 4700K, +4 Red & -3 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +2/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this Superia Premium 400 film simulation recipe on my Fujifilm X100V:
Masked Reflection – Farmington, UT – Fujifilm X100V
Waiting Girl – Farmington, UT – Fujifilm X100V
Shrub & Fountain – Farmington, UT – Fujifilm X100V
Nutcracker – Farmington, UT – Fujifilm X100V
Cinemark Sun – Farmington, UT – Fujifilm X100V
Hill House – Farmington, UT – Fujifilm X100V
Jon on a Bridge – Farmington, UT – Fujifilm X100V
Setting Sun Forest – Farmington, UT – Fujifilm X100V
Rural Fence – Farmington, UT – Fujifilm X100V
Forget Me Knots – Farmington, UT – Fujifilm X100V
Chainlink Berries – Farmington, UT – Fujifilm X100V
Yellow Blackberry Leaf – Farmington, UT – Fujifilm X100V
Rural Autumn Leaves – Farmington, UT – Fujifilm X100V
Late Autumn Sunstar – Farmington, UT – Fujifilm X100V
Neighborhood in Evening Light – Farmington, UT – Fujifilm X100V
Intent – Farmington, UT – Fujifilm X100V
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
