Film Simulation Review: Waiting With Fujicolor 100 Industrial

49831984242_6bcf1053aa_c

Waiting Outside – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

My Fujicolor 100 Industrial film simulation recipe is very underrated. I don’t hear many people talk about it. This recipe doesn’t get nearly as many views as some of my other ones, perhaps because the film that it mimics isn’t especially well known. Make no mistake, this recipe is one of the best! If you’ve never tried it, I invite you to do so.

This particular film simulation recipe pairs well with urban scenes. It’s good for more than just that, but a downtown environment seems to be where this recipe does its best work. These photographs aren’t urban, but my Fujicolor 100 Industrial recipe was a good choice for this series.

Anytime can be a good time for photography. Take a camera with you wherever you go, and you’ll be surprised at the photographic opportunities that present themselves. This series of pictures was captured while waiting in line to get inside of Costco, and I was able to do this because I had my Fujifilm X-T30 with me, which had a Fujinon 35mm f/2 lens attached to it. With what’s going on in the world, there’s a line to even get inside of the store to shop. I used the wait as an opportunity to create some pictures. This is no special event. The lighting wasn’t extraordinary. It was unremarkable. Despite that, there were pictures worth capturing, images worth creating, even in an ordinary moment. Use the ordinary moments in life as photographic opportunities.

49831152698_a9f384e754_c

Architecture of Costco – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

49831140518_fb00b661b2_c

Green Tree & Roof – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

49831677266_6d806e3108_c

Removing Gloves – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

49831124343_12dcf86298_c

Pushing Baskets – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

49831660576_8b8796e872_c

Distancing – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

49831659081_289c32d730_c

Guy in a Red Shirt – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

49831142693_fdbddca07d_c

Cart Man – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

49831153573_562f79d572_c

Red & Silver Carts – Ogden, UT – Fujifilm X-T30 & Fujinon 35mm f/2

See also: Film Simulation Reviews

11 comments

  1. alexander · April 30

    Man, I noticed long ago that ProNeg.Std was the best for all about photos. With some tweaks to one’s taste of course.

    Liked by 1 person

    • Ritchie Roesch · April 30

      Pro Neg Std is definitely underrated. I ignored it for awhile when I first got into Fujifilm cameras.

      Like

    • Khürt Williams · April 30

      I recently started using ProNeg Std and ProNeg Hi, and I think I like them better than Classic Chrome.

      Liked by 2 people

      • Ritchie Roesch · 30 Days Ago

        I like both Pro Neg Std and Hi, but of the two I find myself using Std more often.

        Like

  2. Khürt Williams · April 30

    That kind of line in New Jersey would get that Costco shutdown. I don’t see any proper physical distancing, and no one is wearing face masks. You can’t enter any store in New Jersey without a face mask.

    Like

    • Ritchie Roesch · 30 Days Ago

      Things are a lot different in Utah, probably because it hasn’t hit here very badly. In Utah, individual counties decide what restrictions they have. Half of the Coronavirus cases, hospitalizations and deaths have occurred in one county, and it’s more restrictive there. The county that this Costco is in has barely been touched by Coronavirus, so it’s less restrictive. I imagine New Jersey being much more restrictive than here.

      Like

  3. Marius · 29 Days Ago

    Nice simulation

    Personally I use only 3 film
    simulations for my tests with or without recipe.
    Classic Chrome, Across AND ProNeg Std definitely not underrated here 😉

    Liked by 1 person

  4. 27millimeterUwe · 27 Days Ago

    Hi Ritchie, thank you so much for this blog post and receipe!!!
    To be honest, I shoot Fujigear since end of 2013 and I never ever used ProNeg Std. 😦
    Until today 🙂
    I use this receipe now on my X-T10 (!) … there is no setting for grain and classic chrome effect, but the receipe is absolutely wonderful on the X-Trans II Sensor. My everyday setting has changed into Fujicolor 100 Industrial!
    Greetings from Germany

    Liked by 1 person

    • Ritchie Roesch · 26 Days Ago

      I’m so glad that you like it! That is cool that you were able to adapt it to your X-T10. Thank you for commenting!

      Like

  5. I used the simulation a bit ago, last summer.
    I’ve got so many Itry and use the ones I have on tap to match what I’m shooting. For me, the AgfaColor film simulation I prefer over the Fuji Industrial 100 for Urban shots.

    I did get these with the Fuji Industrial on the XPRO2:

    07-15-2019_XPRO2_fujiindustr100_DSCF9231.jpg

    Like

    • Ritchie Roesch · 26 Days Ago

      Thank you for sharing! I didn’t know that one could add a picture to the comments. How did you do it?

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s