Fuji X Weekly app

Travel: 10 Film Simulation Recipes in Arizona

Posted on by Ritchie Roesch

Three Palms – Sun City West, AZ – Fujifilm X-E4 & Fujinon 27mm – “Kodak Portra 400 v2”

In my last article I showed you my “ultimate” Fujifilm travel kit, which I took on a recent trip to Arizona. In this article I will share with you the film simulation recipes that I used while in The Grand Canyon State!

In my kit are two Fujifilm cameras: an X100V and an X-E4. The X100V is capable of saving seven recipes, while the X-E4 is capable of saving eight, which means that I could have had as many as 15 different film simulations ready-to-go between the two cameras! Of course, with the Fuji X Weekly app, I had access to many, many more, which I could have quickly programmed if I had wanted to. I ended up using 10 different recipes: two on my X100V and eight on my X-E4.

While I could have used as many as 15 recipes, and I ended up using 10, I think no more than eight film simulation recipes for one trip might be a better strategy. It would have made a lot of sense to have the same ones programmed into both cameras, just for consistency. Still, it’s fun to see how different recipes do in various situations, so maybe consistency isn’t as big of a deal as enjoyment is—there’s something to be said for both, so maybe it’s important to find the right balance, and that number is likely different for each person.

Fujifilm X100V

On my Fujifilm X100V I had seven film simulation recipes programmed into the camera, but I only used two on this trip. I ended up using the X100V a lot less than I thought I would, mostly because the X-E4 had just arrived, and I was trying to put it through its paces. If I had shot with the X100V more, I likely would have used more than just two recipes with it. On my next trip I plan to program the two cameras with, for the most part, the same recipes.

Color Negative 400

Golf Balls – Phoenix, AZ – Fujifilm X100V
Putting Practice – Phoenix, AZ – Fujifilm X100V
Desert Spikes – Phoenix, AZ – Fujifilm X100V

Creamy Color

Faux Tree Leaves – Phoenix, AZ – Fujifilm X100V
Metal Pool Flowers – Phoenix, AZ – Fujifilm X100V
Pinnacle Peak – Phoenix, AZ – Fujifilm X100V

Fujifilm X-E4

Of the eight film simulation recipes that I programmed into the X-E4, two are currently early-access recipes only available to Fuji X Weekly Patrons on the Fuji X Weekly app: Vintage Negative and Lomochrome Metropolis. These two recipes will eventually be free to everyone, but right now only Patrons can access them.

The recipes that I used the most are Fujicolor Superia 800, Kodachrome 64, and Kodak Tri-X 400. If I only used those three for the trip, I would have been happy, I think. But it’s fun to try different ones. For example, Lomochrome Metropolis and B&W IR aren’t always easy to use, but in the right situations they can produce stellar results.

Kodachrome 64

Cactus Seat – Surprise, AZ – Fujifilm X-E4 & Fujinon 27mm
SS At 35th – Phoenix, AZ – Fujifilm X-E4 & Fujinon 35mm
American Motorcycle – Phoenix, AZ – Fujifilm X-E4 & Fujinon 18mm

Kodak Portra 400 v2

That Way – Phoenix, AZ – Fujifilm X-E4 & Fujinon 27mm
Yellow House & Blue Sky – Phoenix, AZ – Fujifilm X-E4 & Fujinon 27mm
Arizona Rainbow – Phoenix, AZ – Fujifilm X-E4 & Pentax-110 50mm

Fujicolor Superia 800

Blossoming Red – Phoenix, AZ – Fujifilm X-E4 & Fujinon 27mm
Lemon Tree – Phoenix, AZ – Fujifilm X-E4 & Fujinon 35mm
Spring Seeding – Phoenix, AZ – Fujifilm X-E4 & Pentax-110 50mm

The Rockwell

Palm & Uncertain Sky – Surprise, AZ – Fujifilm X-E4 & Fujinon 27mm
Yucca – Glen Canyon Nat. Rec. Area, AZ – Fujifilm X-E4 & Pergear 10mm
Fire Food – Phoenix, AZ – Fujifilm X-E4 & Fujinon 18mm

Vintage Negative

Yellow Corner – Phoenix, AZ – Fujifilm X-E4 & Pentax-110 50mm
Yellow Wall – Phoenix, AZ – Fujifilm X-E4 & 7artisans 50mm
Shrub & Sky – Phoenix, AZ – Fujifilm X-E4 & 7artisans 50mm

Lomochrome Metropolis

Dirt Desert Drive – Phoenix, AZ – Fujifilm X-E4 & Pergear 10mm
Dark Blossoms – Phoenix, AZ – Fujifilm X-E4 & 7artisans 50mm
Hanging Light Bulb – Phoenix, AZ – Fujifilm X-E4 & Fujinon 35mm

Black & White Infrared

Ceramic & Stucco – Surprise, AZ – Fujifilm X-E4 & Fujinon 27mm
Tropical Blossom Monochrome – Phoenix, AZ – Fujifilm X-E4 & 7artisans 50mm
Black & White Bloom – Phoenix, AZ – Fujifilm X-E4 & Fujinon 27mm

Kodak Tri-X 400

Palms Trees & Storm – Sun City West, AZ – Fujifilm X-E4 & Fujinon 27mm
Roundabout – Phoenix, AZ – Fujifilm X-E4 & Fujinon 18mm
Two Thirty – Surprise, AZ – Fujifilm X-T4 & Fujinon 27mm

Which of one these film simulation recipes is your favorite? Which one that I didn’t use should I on my next adventure? Let me know in the comments!

Fuji X Weekly — Film Recipes App

Posted on by Ritchie Roesch

The Fuji X Weekly — Film Recipes App is now available for both Android and iOS!

The Fuji X Weekly app is a mobile film simulation recipe library containing over 100 recipes for Fujifilm cameras! The film simulation recipes in the app are the same ones that you know and love from this website, but now take them with you on the go, and have them at your fingertips wherever you are!

The Fuji X Weekly app is free! No annoying ads. Get access to 100+ film simulation recipes, which can be sorted alphabetically or chronologically. Each recipe contains an assortment of sample images, as well as a list of compatible cameras. Within each recipe there’s a place where you can keep notes, a useful feature for many of you, no doubt. The app will work offline, so if you don’t have internet access but need to find a certain recipe, no problem! The Fuji X Weekly app is a handy tool for Fujifilm photographers, an essential app to accompany your X-series camera. 

This app does have some advanced features that can be unlocked by becoming a Fuji X Weekly Patron! These advanced features include filtering by sensor or camera, as well as by film simulation or color/B&W, and the ability to favorite recipes for quick access. The best app experience is reserved for Patrons!

Fuji X Weekly Patrons also get early access to some new film simulation recipes. There are currently 9 brand-new film simulation recipes that only Patrons can view. These recipes will eventually be published on Fuji X Weekly—free to everyone—but right now they’re available only to Patrons. These recipes currently are: Kodak Portra 400 v2 (for X-T30 and X-T3), CineStill 800T (for X-Trans II), Fujicolor Negative (for X100V, X-Pro3, X-T4, X-S10 and X-E4), LomoChrome Metropolis (for X-T4, X-S10 and X-E4), Porto 200 (for X-Trans III + X-T3 and X-T30), Kodak Portra 400 Warm (for X100V, X-Pro3, X-T4, X-S10 and X-E4), Provia (for X-Trans I), Vintage Negative (for X100V, X-Pro3, X-T4, X-S10 and X-E4), and Fujicolor NPH (for X100V, X-Pro3, X-T4, X-S10 and X-E4). As new early-access recipes are cycled into the app for Patrons, the others will be made available on this website and on the app free to all, so no worries.

By becoming a Fuji X Weekly Patron, which is only $19.99 annually, you unlock the app’s full potential, you get early access to some new film simulation recipes, and you help support Fuji X Weekly! It’s a win-win!

The Fuji X Weekly App is Now Compatible With Android 9!

Posted on by Ritchie Roesch

Just a quick update: the Fuji X Weekly — Film Recipes App for Android is now compatible with Android 9! Many of you who tried to download it but couldn’t (because it wasn’t available for your device) now can. Yea! We’re working on the possibility of making the app compatible with Android 8, but right now, if you have Android 9 or newer, you can download the app today. Google also made the app searchable in the Play Store, so you can simply search Fuji X Weekly, or follow the direct link.

Update: Fuji X Weekly Android App Compatibility

Posted on by Ritchie Roesch

The Fuji X Weekly — Film Recipes App for Android was released yesterday, and I’ve been overwhelmed by the feedback (this is not a complaint). The number one message I’ve received is: why is my device not compatible? The Fuji X Weekly app requires Android 10 or newer, so if your operating system is Android 9 or older it won’t work; however, compatibility with Android 9 (a.k.a. Android Pie) is coming soon, just as soon as Google approves it, hopefully before the end of the week.

A couple of months ago I conducted a survey in an attempt to find out what Android operating system most of you are using. The vast majority answered either Android 10 or Android 11. As it turns out, the survey missed a large group of people. Thankfully, none of the app’s features require Android 10, and Android 9 has sufficient security, so it wasn’t too difficult to create an update to make the app compatible with the Android 9 operating system. I’ll let you know just as soon as Google approves it; if you have Android 9 you’ll be able to get the app soon.

Most Android phones released in the past two years are capable of running on Android 10, so if your phone isn’t old, yet the Google Play store states that your device isn’t compatible, updating the software might remedy the problem. Most Android devices released in the past four years (and some that are older than that) are capable of running on Android 9, so once the app update is released, most people should be able to download the Fuji X Weekly app. Just make sure the software on your device is up-to-date.

I want to apologize for the frustration some of you have experienced because the app isn’t compatible with your device. Hopefully the issue will be resolved quickly.

***Update***
The Fuji X Weekly — Film Recipes App is now compatible with Android 9 (a.k.a. Android Pie)!

It’s Here! Introducing the Fuji X Weekly — Film Recipes App for Android

Posted on by Ritchie Roesch

The Fuji X Weekly — Film Recipes App is a mobile film simulation recipe library containing over 100 recipes for Fujifilm cameras! The film simulation recipes in the app are the same ones that you know and love from this website, but now take them with you on the go, and have them at your fingertips wherever you are!

The Fuji X Weekly app is free! No annoying ads. Get access to 100+ film simulation recipes, which can be sorted alphabetically or chronologically. Each recipe contains an assortment of sample images, as well as a list of compatible cameras. Within each recipe there’s a place where you can keep notes, a useful feature for many of you, no doubt. The app will work offline, so if you don’t have internet access but need to find a certain recipe, no problem! The Fuji X Weekly app is a handy tool for Fujifilm photographers, an essential app to accompany your X-series camera. 

This app does have some advanced features that can be unlocked by becoming a Fuji X Weekly Patron! These advanced features include filtering by sensor or camera, as well as by film simulation or color/B&W, and the ability to favorite recipes for quick access. The best app experience is reserved for Patrons!

Fuji X Weekly Patrons also get early access to some new film simulation recipes. There are 9 brand-new film simulation recipes that only Patrons can view. These recipes will eventually be published on Fuji X Weekly—free to everyone—but right now they’re available only to Patrons. As new early-access recipes are cycled into the app for Patrons, the others will be made available on this website and on the app free to all, so no worries.

By becoming a Fuji X Weekly Patron, which is only $19.99 annually, you unlock the app’s full potential, you get early access to some new film simulation recipes, and you help support Fuji X Weekly! It’s a win-win!

The Fuji X Weekly app is now available in the Google App Store. Download it to your mobile Android device today!

***Update 3/4/2021***
The Fuji X Weekly — Film Recipes App is now compatible with Android 9 (a.k.a. Android Pie)!

Update: Fuji X Weekly App for Android Almost Finished!

Posted on by Ritchie Roesch

The Android version of the Fuji X Weekly — Film Recipes app is almost finished! It will be in the Google Play app store very soon! I’m not sure exactly when (it depends on how quickly Google takes to review it), but for certain the wait is almost over. With any luck, it will available to those with Android phones within a few days, hopefully no more than a week. There could, of course, be some unforeseen delays. The moment I know, I will definitely let you know, so stay tuned!

New Patron Early-Access Film Simulation Recipe: Fujicolor NPH

Posted on by Ritchie Roesch

Winter Evergreens – Weber Canyon, UT – Fujifilm X100V – “Fujicolor NPH”

The Fuji X Weekly app is free, yet becoming a Fuji X Weekly Patron unlocks the best app experience! One benefit of being a Patron is you get early access to some new film simulation recipes. These early-access recipes will eventually become available free to everyone in time, including this new one. In fact, a couple of the original early-access recipes have been publicly published on this blog and the app, so everyone can use them now. Patrons help support Fuji X Weekly and, really, without them there would be no app. So I want to give a special “thank you” to all of the Patrons!

This new Patron early-access film simulation recipe is called “Fujicolor NPH” because it is inspired by that film. Actually, I was attempting a Fujicolor Pro 400H recipe. I have a couple already: Fujicolor Pro 400H for X-Trans III and Fujicolor Pro 400H Overexposed for X-Trans IV. I don’t think either are 100% accurate to the film; perhaps no recipe is, but some are closer than others. I really like this new version I made—I believe it’s closer than the X-Trans III recipe, but it’s not a perfect match. I actually think it’s closer to Fujicolor NPH 400 film, which was the predecessor to Pro 400H. Those two emulsions were nearly identical, with only some small differences, so this new recipe does well at mimicking both, but in my opinion it’s slightly closer to NPH 400.

If you are a Fuji X Weekly Patron, this new Fujicolor NPH film simulation recipe is already on the app!

Weber River in Winter – Weber Canyon, UT – Fujifilm X100V – “Fujicolor NPH”
Honey Salmon – Salt Lake City, UT – Fujifilm X100V – “Fujicolor NPH”
760 Sign – Farmington, UT – Fujifilm X100V – “Fujicolor NPH”
Stepping Into the Night Circle – Sunset, UT – Fujifilm X100V – “Fujicolor NPH”

Two New (Yet Old) Film Simulation Recipes

Posted on by Ritchie Roesch

I just added two new film simulation recipes to the Fuji X Weekly app!

These two recipes aren’t actually new, they’re just new to the app. I’ve created so many different film simulation recipes over the last few years, sometimes it’s hard to keep track of them all. Right now there are 135 different ones on the app! The two that I just added were somehow overlooked. By request, they’re now included on the app.

Let’s take a look at these two new (yet old) film simulation recipes!

Stephan Shore Kodacolor

Pointing Towards the Sky – Layton, UT – Fujifilm X-T30

My Kodacolor film simulation recipe is quite popular as it produces a great vintage-analog aesthetic that’s easy to love. Kodacolor film has been around for a long time—the name was first used by Kodak in 1942—and many different emulsions have had this brand name on it. Interestingly, Kodacolor was the first color negative film intended for making prints.

Stephen Shore shot a lot of Kodacolor, mostly Kodacolor-X and Kodacolor II, but also likely the original Kodacolor, Kodacolor 400, and Kodacolor-VR. While Shore did shoot 35mm film, he is most known for his medium-format and large-format photographs. Something I learned is that medium and large format Kodacolor film is more saturated than the 35mm emulsion. The only difference between the original Kodacolor recipe and the Stephen Shore Kodacolor recipe is that Color is turned up a little, otherwise they’re identical.

Faux Eterna

Smiling Jonathan – South Weber, UT – Fujifilm X-T30

When Fujifilm introduced the Eterna film simulation on the X-H1, I received several requests to create a recipe that mimics it for cameras that don’t have Eterna. At the time, there weren’t many example pictures captured with Eterna, yet I made an attempt anyway, but it turned out to be inaccurate. Once I had a chance to use Eterna, I created this Faux Eterna recipe, which is much closer to the film simulation.

Faux Eterna is intended to look like “stock” Eterna (Highlight, Shadow, and Color set to 0, plus auto-white-balance with no shift). It’s nothing fancy, but that doesn’t mean it’s not a good look. There are other fake Eterna recipes that I created for cameras that don’t have it, including one that mimics my X-Trans IV Eterna recipe for X-Trans III, one that mimics that Eterna recipe but for X-Trans II, and, if you look at the bottom of the Expired Eterna recipe for X-Trans IV, you’ll find a version of that for X-Trans III cameras.

New Patron Early-Access Film Simulation Recipe: Vintage Negative

Posted on by Ritchie Roesch

Vintage Berries – Farmington, UT – Fujifilm X100V – “Vintage Negative”

There’s a new Patron early-access film simulation recipe on the Fuji X Weekly app! It’s called Vintage Negative and is based on some old photographs that someone shared with me. If you’re looking for an aged analog aesthetic, this recipe might be for you! It’s compatible with the Fujifilm X100V, X-Pro3, X-T4, X-S10 and the upcoming X-E4.

The Fuji X Weekly app is currently only available for iOS, but progress is being made on the Android version. I think it’s not that far from being finished. As long as there are no unforeseen delays, it will be available by March 1st, hopefully sooner. The app is free, and some features and functionality can be unlocked by becoming a Patron, which is a great way to support what’s going on here. There’s some wonderful stuff in the works, and I can’t do it without you. I want to give a big “Thank You” to all of the Patrons for your support!

One of the perks of being a Fuji X Weekly Patron is that you get early-access to some new film simulation recipes. This new Vintage Negative recipe is one of those Patron early-access ones. It will eventually become available to everyone once a new Patron early-access recipe replaces it. There were seven of these recipes on the app, but I’m increasing that to ten. So far, two of the original early-access recipes have been made available to everyone, but eventually they all will, including this one. My cameras’ custom presets are chocked full of upcoming recipes and various experiments.

If you have an iPhone or iPad, be sure to download the Fuji X Weekly app—it’s free! You can get early access to the Vintage Negative film simulation recipe by becoming a Patron.

Water Tower – Salt Lake City, UT – Fujifilm X100V – “Vintage Negative”
Troller Square – Salt Lake City, UT – Fujifilm X100V – “Vintage Negative”
Yellow House Evening – Farmington, UT – Fujifilm X100V – “Vintage Negative”
Suburban Reed Evening – Farmington, UT – Fujifilm X100V – “Vintage Negative”

New X-Trans I Patron Early-Access Film Simulation Recipe on App!

Posted on by Ritchie Roesch

Cradle Tree Branch – Farmington, UT – Fujifilm X-M1 – “Provia”

There’s a new Fuji X Weekly Patron early-access film simulation recipe available now on the Fuji X Weekly app! If you are a Patron, you can use it today! This new recipe is for X-Trans I cameras (X-E1, X-Pro1 and X-M1), and it replaces the Classic Analog recipe, which was a Patron early-access recipe, but is now available to everyone. Yea!

Below are a few examples of this new recipe, which is simply called Provia, captured with a Fujifilm X-M1. Bricks in the Wall (below) was captured by my daughter, Joy, who I let use the camera.

Sun over Country Horses – Farmington, UT – Fujifilm X-M1
Target – Farmington, UT – Fujifilm X-M1
Bricks in the Wall – Farmington, UT – Fujifilm X-M1 – Photo by Joy Roesch
Strollin’ Jo – Farmington, UT – Fujifilm X-M1

New Patron Early-Access Recipe: Kodak Portra 400 Warm

Posted on by Ritchie Roesch

Old Trolley Building – Salt Lake City, UT – Fujifilm X100V – “Kodak Portra 400 Warm”

Yesterday I added my Kodak Portra 400 v2 film simulation recipe to the Fuji X Weekly blog. That was a Patron-only early-access recipe on the Fuji X Weekly app, but now it’s available to everyone! I think a lot of people will really appreciate that Portra 400 v2 recipe. Now there’s a new Patron early-access recipe on the app in its place called Kodak Portra 400 Warm. If you are a Fuji X Weekly Patron, check it out!

This new Kodak Portra 400 Warm recipe came about after the Kyle McDougall Portra-Style comparison article. These settings are an attempt to get closer to Kyle’s preset aesthetic. Some film simulation recipes are good for everyday use, some are good only in the right situation. This is one falls into the latter category, I think. This one isn’t for everyone or every situation, but for some people in the right situations, this recipe will be greatly loved! I think it looks best in sunny daylight, but can produce interesting results sometimes in other lighting situations, too.

If you aren’t a Patron, don’t worry. Like all of the early-access recipes, this one will eventually be made available to everyone. Just have patience. If you have the app but aren’t a Patron, yet you want to use this recipe, you can either wait for it to become free or become a Patron and help support the great things that are happening here! Really, Patrons are the ones who are making so much happen because I can’t do it on my own. If you are a Patron, thank you so much for your support!

Beer & Wings – Salt Lake City, UT – Fujifilm X100V – “Kodak Portra 400 Warm”
Bright Yellow House – Farmington, UT – Fujifilm X100V – “Kodak Portra 400 Warm”
Dumpster, Truck – Layton, UT – Fujifilm X100V – “Kodak Portra 400 Warm”
Evening Chair – Farmington, UT – Fujifilm X100V – “Kodak Portra 400 Warm”

Fuji X Weekly App featured on FujiRumors & PetaPixel!

Posted on by Ritchie Roesch

The Fuji X Weekly App for iOS has been making the rounds on the web! FujiRumors shared it on December 24th, a Christmas Eve surprise! Today, PetaPixel published an article about it! These were both completely unexpected! Being featured on these websites is a big deal, and this is a first appearance for me on Petapixel. I’m really honored.

Here’s a quick update:
The Android version of the app is being worked on and progress is so far going quite well. I’m hoping that it will be available before March, but there’s still a long ways to go before it’s done, so it’s hard to say for sure when it will be released. The Fuji X Weekly Patrons are the ones who are making this happen, and the Android app would be nowhere close to where it is now without the Patrons. Your support is going to produce some amazing things that would not be possible without you. Thank you, Patrons!

Once the Android version is out, the next big thing is an update that will bring new features and functionality to the app. Some things will be made available to everyone, and some things will be made available only to Patrons, and some current Patron-only features will be unlocked for everyone. I don’t know how long it will take to get the update up and running, but I’m really hoping it can be done before the summer.

The Fuji X Weekly app has been downloaded 20,000 times! That’s incredible! I’m happy to provide this free resource to you, and it will only get better and better! I’m extremely appreciative of all the Patrons, because without your support none of this would be possible. We all owe you a debt of gratitude! I want to give a big “thank you” to those who have downloaded the app, to those who have shared the app on their websites and social media, and especially to all the Patrons!

Thank You, Fuji X Weekly App Patrons!

Posted on by Ritchie Roesch

The Fuji X Weekly App for iOS has been out for one week! It really has been an amazing seven days.

I want to say Thank You to everyone who has downloaded the app! I hope that it’s a useful tool for your photography. I appreciate everyone who has shared it on their social media. I’m grateful for those who left such positive reviews in the app store! The feedback and suggestions that I’ve received are invaluable. You all are the best part of the Fujifilm community!

I want to give a very special Thank You to those who are Fuji X Weekly Patrons! There’s a little bit of an immediate reward you received because you unlocked some features that give you the best app experience. But, more importantly, is the reward that you don’t yet see! The Fuji X Weekly App, as it is now, is just the beginning. There’s so much more coming, and it’s only possible because of Patrons!

An Android version of the app is being worked on, and I’m concentrating my efforts on getting it out as quickly as possible. It’s coming! But the road is still long, and I can’t say when it will be ready. Because of Fuji X Weekly Patrons, this version of the app will be out more quickly than I originally anticipated. Yea!

Once that’s complete, we will begin working on some updates to the Fuji X Weekly App that will add new features, functionality and other improvements. There will be some really interesting changes, with additions to both the free and Patron sides. The app will become better, and more fun! I can’t give you the details yet, but I can say that you’ll love it and Patrons are the ones making it possible. Thank you!

If you have an iPhone or iPad and haven’t yet downloaded the Fuji X Weekly App, you should go to the app store now and do so! If you have the app and find it useful, let me know in the comments!

Survey: Which Android OS Do You Use?

Posted on by Ritchie Roesch

The Fuji X Weekly App is out for iOS! It’s coming to Android, too, but there’s still a lot of work to do. For those waiting for the Android version, I have a big favor: I need to know what Android OS is on your device! I’ve included a survey below. Your answers will help tremendously with the app development, and it’s much appreciated!

On a side note, there’s now an official Fuji X Weekly Facebook page! Please give it a “like” to follow. I’ve been incredibly busy lately (as you can imagine), and I’ve pretty much jumped off of Facebook because it can be such a time thief, but I don’t want to be completely off of it. Facebook is a great way to keep up to date on things and easily share stuff. The Fuji X Weekly Facebook page is my answer to this, and hopefully it can serve a good purpose while also not being too time consuming. I invite you to follow me on Facebook and Instagram!

Fuji X Weekly App: Filtering by Camera or Sensor?

Posted on by Ritchie Roesch

The Fuji X Weekly app has the ability, for Patrons, to filter by Camera or Sensor. It might seem most obvious to pick your camera, but that might not be the best choice. Why? Let me explain.

With each recipe, I only included the cameras that are 100% compatible with that recipe. There are many situations where a recipe is 99% compatible. For example, the Fujifilm X-T4, X100V, X-Pro3 and X-S10 aren’t 100% compatible with X-Trans IV recipes intended for the X-T3 and X-T30, despite having the same sensor. Why? Because the X-T3 and X-T30 models don’t have an option for Grain size, so you’ll have to decide for yourself if it should be Small or Large, and also B&W Toning is different. Because of this, recipes like Kodak Gold 200, Eterna, Kodacolor, and many, many, many more won’t show up if you filter by X-Pro3, for example. They will, however, show up if you filter by X-Trans IV sensor. If you have an X-Pro3, if you filter by Sensor instead of Camera, you’ll see a lot more recipes. In fact, you could filter by both X-Trans III and X-Trans IV!

It’s a similar story if you have, for example, a Fujifilm X-E2. X-Trans I and Bayer recipes will work on your camera, but they’ll look a little different. Those recipes won’t show up if you filter by Camera, but they will if you filter by X-Trans I, X-Trans II and Bayer.

If you have an X-Trans III camera, it makes more sense to filter by Camera because all of the recipes that are compatible will appear (including X-Trans IV recipes that are also compatible). If you have an X-Trans IV camera, it makes more sense to filter by Sensor; however, the X-T3 and X-T30 are an exception, and like X-Trans III, it makes more sense to filter by Camera if you have either of these models. X-Trans II is a mixed bag because not every camera has the same film simulations, so if your model doesn’t have Classic Chrome and the PRO Neg. options, it will be better to filter by Camera, but otherwise by Sensor so that you can also access the X-Trans I and Bayer sensors. X-Trans I and Bayer cameras have a similar limitation (not all models have all of the film simulations), so filtering by Camera will reveal what’s for certain compatible, and filtering by Sensor will reveal what may or might not be compatible.

I hope this isn’t too confusing. My recommendation is to try both filtering options, and decide what makes the most sense for you.

7 New Film Simulation Recipes – Patron Early Access!

Posted on by Ritchie Roesch

The Fuji X Weekly app for iOS comes out on December 1st, which is just a couple of days away! The app is free, but Fuji X Weekly Patrons get early-access to some new film simulation recipes. What does this mean? How do you become a Patron? Read on to find out!

Advanced features on the app, such as Filtering and Favoriting, are unlocked for Fuji X Weekly Patrons. Patrons also get early-access to some new film simulation recipes—there are currently seven, which you’ll find below. As new early-access film simulation recipes are cycled into the app, these will eventually be made free for everyone, published on this blog and on the app, but right now only Patrons can view them. That’s a perk of being a Fuji X Weekly Patron! Not all new film simulation recipes will be made early-access.

How you become a Patron is through the Fuji X Weekly app. Once you download the app, if you click the Gear icon, click the filter option, or click an early-access recipe, you’ll see the option to become a Patron, which is $19.99 annually. Not only does this give you the best app experience and early-access to some new recipes, but it’s a great way to support Fuji X Weekly and to make the app even better!

Right now the Fuji X Weekly app is only for iOS—great for those with an iPhone or iPad, but not so great for those with Android devices. I’m sorry that I couldn’t release both Apple and Android versions at the same time. An app takes a lot of time and money to create, unfortunately. Getting this off the ground was no small task! Making an Android version of the Fuji X Weekly app is in the plans and one of my top priorities, but it will take a little while to get there.

The seven film simulation recipes below are on the Fuji X Weekly app, available as early-access recipes to Patrons!

Kodak Portra 400 v2

Sage & Sunset – Antelope Island SP, UT – Fujifilm X100V

This is a brand-new Portra 400 recipe for those with a Fujifilm X100V, X-Pro3, X-T4 and X-S10. This recipe doesn’t replace the “old” Portra 400 recipe, but is simply another Portra 400 look. Film can have several different aesthetics depending on how it’s shot, developed, scanned and/or printed, and viewed. Both Portra 400 recipes were created by studying actual Portra film.

Porto 200

Yellow Bike – Farmington, UT – Fujifilm X-T30

I’ve received a lot of positive feedback from my X-Trans II Porto 200 recipe, so I created a version for X-Trans III & X-Trans IV cameras. Surprisingly, I was not able to achieve a 100% match to the original recipe. I thought this would be quick to create, but it actually took a lot of time. Even though it doesn’t produce identical results to the X-Trans II version, it is still quite similar, and the results are very nice.

LomoChrome Metropolis

Stop No. 11 – Farmington, UT – Fujifilm X-T4

I’ve had so many requests to create a LomoChrome Metropolis recipe, but it’s not been possible, until now! The Fujifilm X-T4 and X-S10 cameras have the new Eterna Bleach Bypass film simulation, plus a new White Balance option, that are required to get this look. If you have an X-T4 or X-S10, this is a film simulation recipe that you just might love!

Fujicolor Negative

November Tree – Farmington, UT – Fujifilm X100V

This film simulation recipe began as an experiment to see if it was possible to create LomoChrome Metropolis using Classic Negative. It’s not possible, but the results were still interesting. It reminds me of Fujicolor C200, perhaps pushed a stop—it isn’t an exact match to that, just coincidentally similar. I think some of you are going to really appreciate this recipe.

CineStill 800T

Night Synergy – Centerville, UT – Fujifilm X-T1

This might be the best version of CineStill 800T that I’ve ever created! This is a recipe that might make you go out and buy a used X-Trans II camera, just so that you can shoot with it!

Classic Analog

Sticks & Dry Leaves – Farmington, UT – Fujifilm X-M1

This is a recipe I created for X-Trans I cameras. It started out as an attempt to get a Portra look using Provia, which didn’t really work, but the results were quite nice nonetheless.

Kodak Portra 400 v2

Walking on a Bridge – Farmington, UT – Fujifilm X-T30

Like the Portra 400 recipe at the top, this is a new version that doesn’t replace the old one, just simply supplements it for a slightly different Portra 400 look. This film simulation recipe is intended for the Fujifilm X-T3 and X-T30.

Which of these new film simulation recipe are you most excited for? Let me know in the comments!

Introducing the Fuji X Weekly App for iOS!

Posted on by Ritchie Roesch

The Fuji X Weekly app is a mobile film simulation recipe library containing over 100 recipes for Fujifilm cameras! The film simulation recipes in the app are the same ones that you know and love from this website, but now take them with you on the go, and have them at your fingertips wherever you are!

The Fuji X Weekly app is free! No annoying ads. Get access to 100+ film simulation recipes, which can be sorted alphabetically or chronologically. Each recipe contains an assortment of sample images, as well as a list of compatible cameras. Within each recipe there’s a place where you can keep notes, a useful feature for many of you, no doubt. The app will work offline, so if you don’t have internet access but need to find a certain recipe, no problem! The Fuji X Weekly app is a handy tool for Fujifilm photographers, an essential app to accompany your X-series camera. This is my Christmas gift to you!

This app does have some advanced features that can be unlocked by becoming a Fuji X Weekly Patron! These advanced features include filtering by sensor or camera, as well as by film simulation or color/B&W, and the ability to favorite recipes for quick access. The best app experience is reserved for Patrons!

Fuji X Weekly Patrons also get early access to some new film simulation recipes. There are 7 brand-new film simulation recipes that only Patrons can view. These recipes will eventually be published on Fuji X Weekly—free to everyone—but right now they’re available only to Patrons. As new early-access recipes are cycled into the app for Patrons, the others will be made available on this website and on the app free to all, so no worries.

By becoming a Fuji X Weekly Patron, which is only $19.99 annually, you unlock the app’s full potential, you get early access to some new film simulation recipes, and you help support Fuji X Weekly! It’s a win-win!

So much time (and money) has gone into creating this app. I believe that it will be useful to many of you, and I also believe it can grow into so much more. I can’t do it without your support. I appreciate everyone who has helped in one way or another already. I appreciate everyone who becomes a Patron! The Fuji X Weekly audience (that’s you!) truly is the best!

The Fuji X Weekly app will be available in the iOS App Store on December 1st. Download it to your iPhone or iPad! If you have a Mac with an M1 chip, you’ll be able to download the app, too, which might be useful for those who use X RAW Studio (it should be available for all Mac computers in a future update). I hope that an Android version will come along sometime next year, but right now it’s only available for Apple (if you don’t have an iPhone and don’t want to miss out on the app, you can probably find a good deal on an iPad this holiday season). I know that you’ll love the Fuji X Weekly app, and I’m super excited for its release!

I want to give a shout-out to Sahand Nayebaziz, the app developer (and Fujifilm photographer) who turned this idea into a reality. Thank you for all your hard work, and for lending your skills to this project!

Look for the Fuji X Weekly app in the iOS App Store on 12/01/2020!

Announcement Coming Tuesday!

Posted on by Ritchie Roesch

The picture above is the third and final clue of what’s coming on December 1st. In case you missed it, the first clue is here and the second is here. The full announcement with all of the details will be in just a couple of days, on November 24th. Be sure to check Fuji X Weekly on Tuesday!

What is it? You’ve probably guessed already that it is a camera app, and you’re right. A Fuji X Weekly camera app is coming! Yea! I’m not giving any more details today, but I’ll just leave you with this: it’s very cool and I’m super excited about it! I hope you’re excited about it, too, because I think you’re going to really like it.