Fujifilm GFX-50S Film Simulation Recipe: Classic Negative Industrial

January Forest – Farmington, UT – Fujifilm GFX-50S – “Classic Negative Industrial”

One of my favorite film simulation recipes is Fujicolor 100 Industrial, which is intended for Fujifilm X-T30 and X-T3 cameras. X-Trans IV recipes for the X-T30 and X-T3 plus X-Trans III recipes are compatible with the GFX-50S, but the results seem to be very slightly different. I programmed the Fujicolor 100 Industrial recipe into the GFX-50S. Later I updated the firmware, which added the Classic Negative film simulation; it just so happened that the Fujicolor 100 Industrial recipe was selected, and I changed the film simulation from PRO Neg. Std to Classic Negative with this recipe still programmed. I immediately loved the results!

This film simulation recipe, with Classic Negative instead of PRO Neg. Std, doesn’t mimic real Fujicolor 100 Industrial film as well as the original recipe, I don’t think, but the results are pretty nice nonetheless. It can be magical! It’s not a recipe for every situation, but it is indeed beautiful in the right situations. It’s a very happy accident!

Forest Creek – Farmington, UT – Fujifilm GFX-50S – “Classic Negative Industrial”

I believe that this film simulation recipe is compatible with all GFX cameras, although I’m not completely sure about the GFX100 (it should be). It cannot be used on the X-T30 and X-T3 because those cameras don’t have Classic Negative, but it can be used on other X-Trans IV cameras (X100V, X-Pro3, X-T4 and X-S10) by selecting Color Chrome FX Blue Off, Clarity 0 (or maybe -2), and Grain Weak + Small; however, results will be slightly different. I tried it on my Fujifilm X100V and it did, in fact, look good, but it’s really intended for GFX cameras.

Classic Negative
Dynamic Range: DR400
Highlight: +1
Shadow: +2
Color: +1
Color Chrome Effect: Weak
Sharpening: +1
Noise Reduction: -4
Grain Effect: Weak
White Balance: 3200K, +8 Red & -8 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: +1/3 to +2/3 (typically)

Sample photographs, all camera-made JPEGs, captured with a Fujifilm GFX-50S using this Classic Negative Industrial recipe:

Tunnel Silhouette – Farmington, UT – Fujifilm GFX-50S
Pedestrian Tunnel – Farmington, UT – Fujifilm GFX-50S
Manhole Cover – Farmington, UT – Fujifilm GFX-50S
No Parking Any Time – Farmington, UT – Fujifilm GFX-50S
Flasher – Farmington, UT – Fujifilm GFX-50S
Fallen Tree on Frozen Lake – Farmington, UT – Fujifilm GFX-50S
Smiling Jo – Farmington, UT – Fujifilm GFX-50S
January Sun in the Forest – Farmington, UT – Fujifilm GFX-50S
Backlit – Farmington, UT – Fujifilm GFX-50S
Creekside Trail – Farmington, UT – Fujifilm GFX-50S
Vines on Trees – Farmington, UT – Fujifilm GFX-50S
Spiky Leaves – Farmington, UT – Fujifilm GFX-50S
Sunlight Trail – Farmington, UT – Fujifilm GFX-50S
Brown Among Green – Farmington, UT – Fujifilm GFX-50S

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm GFX-50S Amazon B&H
Fujinon GF 23mm f/4 Amazon B&H

50557680816_8cb5645e93_c

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

4 comments

  1. Zopf · January 19, 2021

    This is wonderful. Thanks for your time.
    I’ve been trying to find something for a Spanish forest. Nothing really works well in a pine forest under Mediterranean skies and darker shades of green. I’ve been trying for ages to find something that will separate the detail. Shooting wise, it’s not a problem, it’s the end result colour that does not look good. It’s a hard forest to manipulate.
    So, again thank you. I’m pretty excited about trying this one.

    • Ritchie Roesch · January 19, 2021

      Hopefully this one works for you! Sounds like an amazing place!

  2. Pingback: Comparing Classic Negative Recipes | FUJI X WEEKLY
  3. Pingback: How to Know Which Film Simulation Recipe to Use? | FUJI X WEEKLY

Leave a Reply to Ritchie RoeschCancel reply