Fujifilm X-T20 (X-Trans III) Film Simulation Recipe: Cine Teal

50012501463_e209c64aea_c

Garden Flowers Bloomed – Farmington, UT – Fujifilm X-T20 – “Cine Teal”

My Fujifilm X100V “Cine Teal” film simulation recipe has been a lot more popular than I expected it to be. It requires the Eterna film simulation, plus some other settings only found on the newest Fujifilm models. I’ve been asked by a few people to create a “Cine Teal” recipe for X-Trans III cameras, which don’t have that film simulation and those new options, so I did! This recipe woks best during the “Blue Hour” of dusk and dawn, in shade and on overcast days.

PRO Neg. Std
Dynamic Range: DR400
Highlight: -1
Shadow: +3
Color: -3
Noise Reduction: -3
Sharpening: -1
Grain Effect: Weak
White Balance: 4500K, +2 Red & -8 Blue
ISO: Auto up to ISO 6400
Exposure Compensation: +2/3 to +1 (typically)

Example photos, all straight-out-of-camera JPEGs captured on a Fujifilm X-T20 using this “Cine Teal” Film Simulation recipe:

50013213342_4367ff98c1_c

Upside-Down Umbrella – Farmington, UT – Fujifilm X-T20

50013291687_47ac97062c_c

Green Tree & House – Farmington, UT – Fujifilm X-T20

50012502848_1d35a0588b_c

Been Better – Farmington, UT – Fujifilm X-T20

50012969046_5aeb588317_c

Spring Leaves – Farmington, UT – Fujifilm X-T20

50013224692_5f3655e2fa_c

Tree Leaves Green – Farmington, UT – Fujifilm X-T20

50012436638_b118cfffbf_c

Lavender Bloom – Farmington, UT – Fujifilm X-T20

50013230187_f3ab13c7b0_c

Pine & Rock – Farmington, UT – Fujifilm X-T20

These settings also work on the Fujifilm X-T30 and X-T3, just set Color Chrome Effect to Off. I captured the photographs below on my X-T30 using this “Cine Teal” film simulation recipe:

50012423668_b4c5f3f4b3_c

Hazy Light Through The Tree – Farmington, UT – Fujifilm X-T30

50031831001_6c43d3ed0e_c

Mountain Pines – Francis Peak, UT – Fujifilm X-T30

50031855561_68ee3723be_c

Mountain Ridge – Francis Peak, UT – Fujifilm X-T30

50031315368_78801c17e7_c

Mountain Radar – Francis Peak, UT – Fujifilm X-T30

50031888496_dc8085e405_c

Dusting Snow & Clouds – Farmington, UT – Fujifilm X-T30

50031337113_68ec77e997_c

Clouds Around The Mountains – Farmington, UT – Fujifilm X-T30

50013215487_fe8e23222e_c

Spirit of Photography – Farmington, UT – Fujifilm X-T30

50012571558_a03746e82a_c

Stairs & Reflection – Salt Lake City, UT – Fujifilm X-T30

50012570718_d904b7b9f3_c

Morning Light & Shadows – Salt Lake City, UT – Fujifilm X-T30

50013040466_6b3ace6ddf_c

Film – Salt Lake City, UT – Fujifilm X-T30

See also: Film Simulation Recipes

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There's a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$5.00

12 comments

  1. Bartek · June 27, 2020

    Hey Ritchie, thx for sharing your knowledge. How does fuji settings translate to lightroom? You can choose film simulation in lightroom and modify also other values like sharpness etc but how this relates to fuji camera settings? Ex.highlight -1, whats does it mean in lightroom? As far as i remember in fuji you have highlight -1 and -2 so -1 would stand for -50% slider in lightroom? I didnt play with pictures to compare your settings with lightroom yet but maybe you did already?

    • Jimmy · June 27, 2020

      Hey, if you’re looking to process your photos to get the same look as the recipes I’d recommend using Fuji X raw studio, you just need to connect your camera to your laptop and it’ll use the camera for processing. The lightroom presets are fine but you’re not going to get the exact look with it.

    • Ritchie Roesch · June 28, 2020

      I have no idea, I don’t use Lightroom. These are settings for straight out of camera JPEGs or X RAW Studio. Sorry that I can’t be more helpful.

  2. Nicolas · July 3, 2020

    Hi Ritchie
    sorry for only reaction just now, but I was covered in work and did not even have the time to set up this recipe in my X-E3!
    Thank you so much for adjusting this look for older sensor/processor generations.
    I will try it asap in the wild! I actually have been using your simulations for some images on my @neglectedloves account on Instagram.

    One interesting thing I found out while setting it up: even though there are strict limitations in my outdated firmware, which shows in just one setting for AWB / color shifts, this does not apply to the Kelvin settings (for whatever reason): even though there is a global/general setting for K, I can still chose another K number in C1-C7, only color shift seems to be fixed in general/global settings…

    Weird, weird, weird and totally illogical…
    Still praying for a firmware update and/or an X-E4 😉

    thanks again for all your work and devotion!

    cheers

    • Ritchie Roesch · July 15, 2020

      Some of Fujifilm’s programming doesn’t make sense, but I’m glad that it worked out for you. The X-E line is great, my first Fujifilm camera was an X-E1. Hopefully an X-E4 is in the works.

  3. Pingback: Film Simulation Recipe Compatibility: X-Trans III | Fuji X Weekly
  4. Pingback: Film Simulation Recipe Cards | FUJI X WEEKLY
  5. Pingback: Vintage Lens Jeopardy #2: Fujinon EBC 28mm F3.5 Review - THE DULL CHANNEL
  6. Pingback: Cine Teal film sim in the docks – Sampsa Weekly
  7. Pingback: Cine Teal architecture at the docks – Sampsa Weekly
  8. Pingback: Cine Teal architecture at the docks – STK
  9. Pingback: A study of shadows and streets – STK

Leave a Reply to JimmyCancel reply