Fujifilm X100V Film Simulation Recipe: CineStill 800T

Suburban Night – Farmington, UT – Fujifilm X100V

I created my original CineStill 800T film simulation recipe about two-and-a-half years ago. That recipe has remained quite popular. It’s received a lot of positive feedback and I remain quite proud of it. That recipe was created for X-Trans III cameras, but newer models have more JPEG options. I’ve been asked a few times if that recipe can be improved using the new features that weren’t around when I created it.

This new version is something that I’ve been working on for months and months. My CineTeal recipe is actually one of the failed attempts. I’ve been trying to achieve either an accurate CineStill 800T or Kodak Vision3 500T look straight-out-of-camera. These two films are actually the same film, but the CineStill version has the RemJet layer removed, which means that it is more prone to halation and can be processed in C-41 chemistry. Vision3 500T is meant to be developed using the ECN-2 process. With either CineStill 800T or Vision3 500T, how the film is shot, developed, and scanned and/or printed can significantly effect the aesthetic.

Lone Light – Farmington, UT – Fujifilm X100V – “CineStill 800T”

I’m not 100% satisfied with this recipe. I think in some situations and in certain lighting, it looks pretty darn accurate to the film. In other situations and in other lighting, it’s a little off. There’s a lot of variation in how the film can look, and it’s just not possible to encapsulate it all in one recipe. In any event, if you are looking for a recipe that produces results similar to Tungsten film, this is one to consider. It is only compatible (as of this writing) with the Fujifilm X100V, X-Pro3 and X-T4.

Eterna
Dynamic Range: DR400
Highlight: 0
Shadow: +2
Color: +4
Noise Reduction: -4
Sharpening: -3
Clarity: -5
Grain Effect: Strong, Large
Color Chrome Effect: Strong
Color Chrome Effect Blue: Strong
White Balance: Fluorescent 3 (Cool White Fluorescent), -6 Red & -4 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: -1/3 to +2/3 (typically)

Example photographs, all camera-made JPEGs using this new CineStill 800T film simulation recipe on my Fujifilm X100V:

Garage Door Light – Farmington, UT – Fujifilm X100V
Inside Looking Out – Farmington, UT – Fujifilm X100V
Fuel Stop – Farmington, UT – Fujifilm X100V
Quick Quack Centerville, UT – Fujifilm X100V
Old Navy – Farmington, UT – Fujifilm X100V
Brick at Night – Farmington, UT – Fujifilm X100V
Empty Bench – Farmington, UT – Fujifilm X100V
40% Off – Centerville, UT – Fujifilm X100V
Hi – Farmington, UT – Fujifilm X100V
Navy Surplus Baskets – Farmington, UT – Fujifilm X100V
Ghost Shoppers – Farmington, UT – Fujifilm X100V
Remodel – Farmington, UT – Fujifilm X100V
Red Cotton – Farmington, UT – Fujifilm X100V
Lit Corner – Centerville, UT – Fujifilm X100V
Chillin’ in the Drive Thru – Centerville, UT – Fujifilm X100V
Tree Leaves at Night – Farmington, UT – Fujifilm X100V
Night Rose – Farmington, UT – Fujifilm X100V
Hot Beans – Farmington, UT – Fujifilm X100V
Kitchen Ornament – Farmington, UT – Fujifilm X100V
Book Table – Farmington, UT – Fujifilm X100V
End Table – Farmington, UT – Fujifilm X100V
Girl in Window Light – Farmington, UT – Fujifilm X100V
Home Umbrella Farmington, UT – Fujifilm X100V

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X100V Black    Amazon   B&H
Fujifilm X100V Silver   Amazon   B&H

35191776924_3a26d8eecc_k

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

2.00 $

19 comments

  1. Pingback: Film Simulation Recipe Compatibility: X-Trans IV | Fuji X Weekly
  2. Kevin Whitley · October 6

    Hi there I really love your content its very informative and valuable to us here in the fuji community. I have a question in regards to the cinestill 800t can this be done on the xt3? The reason I ask is because you mentioned it is compatible with the xt4 which has the same sensor and simulations etc.

    Liked by 1 person

    • Ritchie Roesch · October 7

      The X-T3 and the X-T4 have the same sensor, but not the same JPEG options. The obstacles are Color Chrome Effect Blue and Clarity, which the X-T3 doesn’t have. If you try Highlight set to -1 and Shadow set to +1 it might be close, but it won’t be exactly the same.

      Like

  3. theflb · October 7

    Love it! It’s so close to what I was after. Thanks for the inspiration. I tried another version for fun on an x-t30 going the other way with auto r:+6 b:-4 that works great in daylight (tried at a beach)

    Liked by 1 person

  4. wade · October 9

    Moment needs to see this article, because I would love to see how your recipe works with their new CineBloom diffusion filter.

    Liked by 1 person

    • Shawn · October 10

      I cam here to say this too. I just got the NiSi Allure Soft filter for the X100 series and it definitely gives you that halation effect on bright light sources that Cinestill 800 produces. I’ve only had it for 24 hours so far but this film recipe plus this filter definitely tie together nicely from the shots I have taken!

      Liked by 1 person

      • georgesimpsonart · October 12

        The halation of the film also produced bright red hues around lights, not just diffusion.
        I wonder if lightroom could do that in HSL sliders? Although i actually never decided whether it was a good thing-in which case is the digital version an improvement? It was not like the film was a very ‘filmy’ ‘grainy’ film..

        Liked by 1 person

      • Ritchie Roesch · October 14

        I’ll have to look into this filter. Thanks for the tip!

        Like

    • Ritchie Roesch · October 14

      I hope to try the Cinebloom filter. It will be interesting to use, I think.

      Like

      • Michael Grünbeck · October 15

        @georgesimpsonart I’ve tried the new recipe with the Black Pro Mist Filter 1/4 which produces a similiar effect. The asthetic of the recipe and the bloom that the filter creates is very nice. Only thing i added in Lightroom is a slight green toning in the highlights. Also, you can do a brush preset which imitates the red halation very good. I’d like to show you my pictures, im just wondering how to share them.

        Liked by 1 person

  5. Khürt Williams · October 11

    I’ve not been around the nearby downtown after dark but seeing your images, I think I want to experiment with CineStill 35mm film as well as your recipe.

    Liked by 1 person

    • Ritchie Roesch · October 14

      You’ll have to let me know how that goes! I appreciate the comment!

      Like

  6. georgesimpsonart · October 12

    I used cinestill 800t as goto for night film photography.
    I also love the old recipe despite using xtrans-1 its now the goto (often on iso6400, no tripod).

    One thing that is probably hard to do is the effect of haloing on lights. Not only that but it often made highlights a bright red on film. But that said it wasnt what i used the film for, i think the latitude and its colours and the diffuse haloing. Nailing the white balance helps most as i think its a bit less cold as true tungsten.

    Liked by 1 person

    • Ritchie Roesch · October 14

      Thanks! It’s a tough one to mimic, for sure! I hope that further experiments can improve it; I’ve been working on this one a long time, but I think I will come back to it again in the future.

      Like

  7. Adelmo Silva · October 13

    Hi,

    This was the second Cinestill 800T that I’ve tried on my X-T3 and I love it. Someone mention this before and I think that he is right, Moment should see this article because they just came out with a new lens filter, Cinebloom.

    Keep up the good work!

    Adelmo

    Liked by 1 person

Leave a Reply to Shawn Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s