I get asked at least once per week which Film Simulation Recipe was used for a picture in the Fuji X Weeklyhomepage gallery. It’s my fault for not telling you. I should have made it much more obvious. Maybe I should make posts with galleries (but actually include the recipes used so that you don’t have to wonder)? If you see a particular picture you like, perhaps you’ll be inspired to try that recipe.
Anyway, this article is simply an explanation of which recipe was used for each picture in the homepage gallery. If you’ve ever wondered, now you know. I’ll probably change out some of the images within the next few weeks, so keep an eye out for that.
For those keeping score, seven of the pictures were captured with a Fujifilm X100V, two were captured with a Fujifilm X-E4, and one each were captured with an X-T30, X-Pro2, and X-T200,
Right Around the Bend – Arlington, AZ – Fujifilm X-T5 – “Kodak Vericolor Warm”
I wasn’t sure if I should publish this Film Simulation Recipe, but then I thought, why not? Initially, the intention was simply to see how the Nostalgic Neg. film simulation looks with Dynamic Range set to DR100, and how the X-T5 images look at ISO 125, which is the base-ISO of X-Trans V cameras. I didn’t model these settings after any specific film aesthetic; instead, I borrowed the GAF 500 Film Simulation Recipe‘s white balance (modified just a little after a couple test shots), and was also inspired by Kodak Portra 400 and Reggie’s Portra recipes. I wasn’t sure what to expect from this, but I ended up really liking it!
So what does this Film Simulation Recipe most closely resemble? Unintentionally, I think it has some similarities to Kodak Vericolor film. What’s Kodak Vericolor? Originally introduced in 1971 as an ISO 100 professional color negative film, Kodak made two version of Vericolor: NPS (also known as S-Type) for short exposures (Daylight balanced) and NPL (also known as L-Type) for long exposures (Tungsten balanced). Just a few years later Kodak improved the emulsions and in 1974 introduced Vericolor II NPS and NPL, which was also ISO 100. In 1983 Kodak improved the emulsion once again and introduced Vericolor III, which was ISO 160 for NPS and ISO 100 for NPL; however, the NPL version was later spun off as Ektacolor Pro Gold 100T and later Portra 100T, while Vericolor III NPS was renamed Vericolor III 160. Later (sometime in the late-1980’s, although I couldn’t pinpoint a specific year), Kodak introduced a new high-ISO version called Vericolor III 400. Vericolor III 160 and 400 were replaced by Portra 160 and 400 in 1998. This recipe by chance shares a resemblance to Vericolor III 160 or perhaps Vericolor II NPS, but I think it is more warm, and perhaps more like if an 81A Color Correction Filter was used in conjunction with the film, a common technique in the film era, and maybe a CPL filter, too.
This Kodak Vericolor Warm Film Simulation Recipe is only compatible with (as of this writing) the Fujifilm X-T5, X-H2, and X-H2S. I assume that the GFX100S and GFX50S II can also use this recipe, but that it will render slightly different—I don’t have either of those cameras to test it to know for certain. Unless Fujifilm gives X-Trans IV cameras the Nostalgic Neg. film simulation, which I doubt they will do, this recipe is only for X-Trans V cameras, and maybe the latest GFX, too; however, consider the Kodak Portra 160, Kodak Portra 400, and Reggie’s Portra as alternatives for those with X-Trans IV models. This Kodak Vericolor Warm recipe is especially well-suited for daylight photography, but can also be used during “blue hour” and overcast situations.
Film Simulation: Nostalgic Neg. Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome FX Blue: Strong White Balance: 3000K, +8 Red & -9 Blue Dynamic Range: DR100 Highlight: -2 Shadow: -1 Color: +2 Sharpness: -2 High ISO NR: -4 Clarity: -2 ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Kodak Vericolor Warm” Film Simulation Recipe on my Fujifilm X-T5:
Blue Sky Bougainvillea Blossom – Buckeye, AZ – Fujifilm X-T5
Rose in the Garden – Buckeye, AZ – Fujifilm X-T5
Triple Leaves – Buckeye, AZ – Fujifilm X-T5
Water Pipe – Arlington, AZ – Fujifilm X-T5
Trioliet – Arlington, AZ – Fujifilm X-T5
Tired Old Bus – Arlington, AZ – Fujifilm X-T5
Four Lights – Arlington, AZ – Fujifilm X-T5
Tractor Pipe – Arlington, AZ – Fujifilm X-T5
Cattle Co – Arlington, AZ – Fujifilm X-T5
Industrial Water – Arlington, AZ – Fujifilm X-T5
Tree on the Bank – Arlington, AZ – Fujifilm X-T5
Fujifilm Photographer – Arlington, AZ – Fujifilm X-T5
Roadside Memorial – Arlington, AZ – Fujifilm X-T5
Feed Barn – Palo Verde, AZ – Fujifilm X-T5
Metal Garage – Arlington, AZ – Fujifilm X-T5
Rust & Lock – Arlington, AZ – Fujifilm X-T5
Ome – Arlington, AZ – Fujifilm X-T5
No Loitering on Bridge – Arlington, AZ – Fujifilm X-T5
Love the Bridge – Arlington, AZ – Fujifilm X-T5
Goat Man – Arlington, AZ – Fujifilm X-T5
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Red & Green Bush – Buckeye, AZ – Fujifilm X-T5 – “Superia Xtra 400”
This is a simple update to the Superia Xtra 400 Film Simulation Recipe, which was originally made for X-Trans IV cameras. I discovered that a slight tweak is needed for X-Trans V models, because the new sensor renders blues just a little deeper on some film simulations, including Classic Negative. For this recipe, simply setting Color Chrome FX Blue from Strong to Weak makes it compatible with (as of this writing) the Fujifilm X-T5, X-H2, and X-H2S.
Thomas Schwab created the Superia Xtra 400 recipe by capturing a roll of actual Superia Xtra 400 film while also capturing identical exposures with his Fujifilm cameras, then, using X RAW Studio, he worked on the settings until he found a match. As you can imagine, he put a lot of time and effort into creating it! He shared with me some of his side-by-side pictures—comparing the film with his recipe—and it was tough to figure out which was which—they looked so close! Also, just recently another photographer shot a roll of Superia Xtra 400 film and used the Superia Xtra 400 recipe on his Fujifilm camera, and he shared with me the similar results he got between the two. Amazing! Of course, with film, so much depends on how it’s shot, developed, and scanned or printed, and the aesthetic of one emulsion can vary significantly.
Fujifilm introduced Superia Xtra 400, a consumer-grade color negative film, in 1998, replacing Super G Plus 400. This film has been updated a couple of times, first in 2003 and again in 2006. It’s been widely used, thanks to its low cost and versatility. I’ve shot several rolls of this film over the years. This recipe is for Fujifilm X-Trans V cameras. Those with newer GFX models can use it, too, although it will likely render slightly differently.
Film Simulation: Classic Negative Grain Effect: Strong, Small Color Chrome Effect: Off Color Chrome FX Blue: Weak White Balance: Auto, +3 Red & -5 Blue Dynamic Range: DR400 Highlight: 0 Shadow: -1 Color: +4 Sharpness: -1 High ISO NR: -4 Clarity: -2 ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +1 (typically)
Example photographs, all camera-made JPEGs using this “Superia Xtra 400” Film Simulation Recipe on my Fujifilm X-T5:
Forwards or Backwards – Buckeye, AZ – Fujifilm X-T5
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
During this last SOOC broadcast, we attempted something never done before by anyone ever: create a new Film Simulation Recipe live on YouTube (which you can find at the 2:09:19 mark, if you missed the show). It was all done randomly. We spun wheels, used random number apps and programs, picked paper out of a hat, conducted a couple polls, and even had a kid pick a number—this recipe was a group effort created by you using chance. A special Thank You to everyone who participated! This was, of course, for fun. I would say that this is the least serious recipe ever to be published on this website, but that doesn’t mean you can’t use it for serious photography, because you absolutely can!
After completing the recipe, we took up name suggestions from the audience, and then ran a poll to decide which to go with, and “Mystery Chrome” won by a significant margin. The mystery is, perhaps, whether or not this is any good, or if anyone will actually use it—or maybe because it was all a mystery as it was being formed, parameter-by-parameter. We (as in the hosts, the guests, and those in the audience) also programmed this recipe into our cameras right away, and while still broadcasting live, we captured a picture, uploaded it, and shared them in the show (my picture is below). That’s the power of Fujifilm cameras and Film Simulation Recipes: within minutes of creating a recipe, people can program it into their cameras, capture an image, and share it across the globe—it can be that quick. Amazing!
Slides – Buckeye, AZ – Fujifilm X-H1 – “Mystery Chrome”
Interestingly, this recipe—completely by luck—has a Kodak-like reversal film look, thanks to Classic Chrome, the white balance, and Highlight/Shadow settings. I think it’s somewhat similar to Kodachrome 200—it’s not quite right for that, but certainly in the ballpark, and probably the closest recipe on this website for that film. This is a high-contrast recipe, and is best for use in low-contrast situations or to achieve bold results in mid or high contrast scenarios. It certainly has the potential to be well-liked, but I don’t suspect it will be anyone’s go-to recipe for everyday photography.
If it were up to me, I would make one modifications to Mystery Chrome: Noise Reduction to -4 instead of +4. I’m not a big fan of the in-camera Noise Reduction, and I like to take it all the way down. For internet viewing, and even 8″ x 12″ prints, you’ll have a hard time even noticing the difference between +4 and -4, but if you zoom in or print larger, it becomes more obvious. Maybe you prefer the increased Noise Reduction; personally, I do not. All of the photos in this article were captured with Noise Reduction set to +4.
This Mystery Chrome Film Simulation Recipe is compatible with all Fujifilm X-Trans III cameras—X-Pro2, X100F, X-E3, X-T2, X-T20, and X-H1—plus the X-T3 and X-T30 by simply setting Color Chrome Effect to Off. For newer X-Trans IV cameras, additionally set Color Chrome FX Blue to Off, Clarity to 0, and choose a Grain size (either Small or Large)—if you use it on X-Trans V cameras, blues will render slightly more deeply. For GFX, shadows will render slightly less dark, which you might actually prefer.
Classic Chrome Dynamic Range: DR400 Highlight: +3 Shadow: +4 Color: 0 Color Chrome Effect: N/A (X-Trans III) or Off (X-T3/X-T30) Sharpness: -4 Noise Reduction: +4 Grain: Strong White Balance: Daylight, +3 Red & -5 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +2/3 (typically)
Example photographs, all camera-made JPEGs captured using this “Mystery Chrome” Film Simulation Recipe on my Fujifilm X-H1:
Slides Plus Canisters – Buckeye, AZ – Fujifilm X-H1
Corvette Abstract – Buckeye, AZ – Fujifilm X-H1
Taco Lamp – Buckeye, AZ – Fujifilm X-H1
Happy Girl – Buckeye, AZ – Fujifilm X-H1
Late Bloomer – Buckeye, AZ – Fujifilm X-H1
Rainbow Trumpets – Buckeye, AZ – Fujifilm X-H1
Wren in Rome – Buckeye, AZ – Fujifilm X-H1
Traffic Flag – Buckeye, AZ – Fujifilm X-H1
Pergola Lights – Buckeye, AZ – Fujifilm X-H1
Autumn Rainbow – Buckeye, AZ – Fujifilm X-H1
Amber Autumn – Buckeye, AZ – Fujifilm X-H1
Brilliant Leaf – Buckeye, AZ – Fujifilm X-H1
Yellow Tree – Buckeye, AZ – Fujifilm X-H1
Bougainvillea & Palm Fronds – Buckeye, AZ – Fujifilm X-H1
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Up or Down – Buckeye, AZ – Fujifilm X-T5 – “Pacific Blues”
I published the Pacific Blues Film Simulation Recipe just four months ago, and it has already become one of the most popular on Fuji X Weekly. The aesthetic is intended to emulate Lucy Laucht‘s Spirit of Summer series, particularly the Positano Bluesphotographs. While it is intended for a summer day at the beach, the recipe works great for many different subjects and situations. Foggy mornings? Yes! Dreary overcast? Yep! Desert landscapes? Sure! Garden flowers? Autumn leaves? Dramatic portraits? Absolutely. And lots, lots more. I’ve even seen some really interesting night photographs with it. Try this recipe for many different light scenarios and different subjects—you’re bound to love it!
Pacific Blues was made for X-Trans IV cameras, and I discovered that a slight tweak is needed for X-Trans V models, because the new sensor renders blues just a little deeper on some film simulations. For X-Trans IV recipes that use Classic Negative, Classic Chrome, Eterna, or Eterna Bleach Bypass and calls for Color Chrome FX Blue Strong, you’ll need to adjust it to Weak on X-Trans V; if it calls for Color Chrome FX Blue Weak, you need to adjust it to Off. If it calls for Color Chrome FX Blue Off, well, you just have to know it will render differently on X-Trans V and there’s nothing you can do about it. For Pacific Blues, setting it to Weak instead of Strong makes it compatible with X-Trans V.
If you have an X-Pro3, X100V, X-T4, X-S10, X-E4, or X-T30 II, you’ll want to use the original Pacific Blues Film Simulation Recipe. For those with an X-T3 or X-T30, unfortunately Fujifilm never gave your camera the Classic Negative film simulation, so you cannot use Pacific Blues. For those with GFX, if it’s an older model, I think the X-Trans IV version is likely most compatible, and for newer models, this version is likely most compatible; however, I have not tested either version on any GFX model to know for sure. If you have an X-H2, X-H2S, or X-T5 (or any other X-Trans V camera that is released after publication), this is the Pacific Blues recipe that you want to use.
Film Simulation: Classic Negative Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome FX Blue: Weak White Balance: 5800K, +1 Red & -3 Blue Dynamic Range: DR400 Highlight: -2 Shadow: +3 Color: +4 Sharpness: -2 High ISO NR: -4 Clarity: -3 ISO: Auto, up to ISO 6400 Exposure Compensation: +2/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this “Pacific Blues” Film Simulation Recipe on my Fujifilm X-T5:
Minolta Garden – Buckeye, AZ – Fujifilm X-T5
Ground Leaves – Buckeye, AZ – Fujifilm X-T5
Wet Lightbulb – Buckeye, AZ – Fujifilm X-T5
Flower in the Rain – Buckeye, AZ – Fujifilm X-T5
Wet Red Rosebud – Buckeye, AZ – Fujifilm X-T5
Wet Red Bougainvillea – Buckeye, AZ – Fujifilm X-T5
Afternoon Bougainvillea – Bcukeye, AZ – Fujifilm X-T5
Illuminated Branch – Buckeye, AZ Fujifilm X-T5
Spiderwebs – Buckeye, AZ – Fujifilm X-T5
Desert Cactus – Buckeye, AZ – Fujifilm X-T5
Misty Morning Desert – Buckeye, AZ – Fujifilm X-T5
Foggy Tree – Buckeye, AZ – Fujifilm X-T5
Neighborhood Fog – Buckeye, AZ – Fujifilm X-T5
Autumn Walkway – Buckeye, AZ – Fujifilm X-T5
Lifting Clouds Over Veiled Ridge – Buckeye, AZ – Fujifilm X-T5
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
When should you use which Film Simulation Recipes on your Fujifilm X-Trans II camera? With so many recipes to choose from, it can be difficult to know what recipe you should select in a given situation, and this article is intended to help you with that. If you haven’t read Part 1, it’s important to do so because it explains what exactly we’re doing—the backstory—which is imperative to understand. There’s a video to watch in that article, too. Take a moment right now to hop on over to Part 1 (click here) before continuing on with this post, if you haven’t viewed it already.
One thing to note about X-Trans II cameras is that not all of them have the Classic Chrome film simulation, including the X100S, X20, and XQ1. Unfortunately, if you have one of those models, this list is slightly less useful to you, although I hope you still find it helpful. For those with an X100T, X-E2, X-E2S, X-T1, X-T10, X30, X70, or XQ2, this list is fully compatible with your camera.
Like Parts 2 & 3, I set out to recommend seven recipes, one for each C1-C7 Custom Preset, that don’t share the same white balance type or, if they do, they also share the same shift, because X-Trans II cameras cannot remember a White Balance Shift within the C1-C7 Custom Presets. If two recipes share the same white balance type but not the same shift, then when you switch presets you must remember to adjust the shift, too. That can be inconvenient and frustrating, so my best solution is to program recipes that use different white balance types and/or share the same white balance type and shift. The user experience is much improved, but you might not be able to program all of your favorite recipes at the same time, which is the one downside to doing this. It was a difficult task, but I think I came up with a good set for you.
The Classic Kodak Chrome Film Simulation Recipe is a great option for sunrise or sunset photography, or pretty much anytime of the day or night. This is my current favorite recipe for X-Trans II cameras—I shoot with it often, more than all of the other X-Trans II recipes combined. This is my top allrounder choice! Almost no matter the subject, situation, or light, this is the recipe that I go with. Classic Kodak Chrome uses the Auto white balance type; if I wasn’t concerned about white balance type, I’d go with this recipe or Ektachrome 100SW whenever the sun is low to the horizon.
An Arizona Autumn – Buckeye, AZ – Fujifilm X-T1 – “Kodak Portra 160”
Whenever the sun is not low to the horizon, my top-choice for daylight photography is the Kodak Portra 160 recipe, although it is good for “golden hour” too, and can be used anytime the sun is out. This is one of my favorite X-Trans II recipes, and is especially good for portrait photography, or whenever you want warm Kodak-like negative film colors. Kodak Portra 160 uses the Daylight white balance type; if I wasn’t concerned about white balance type, this or any in the “alternatives” list would be good options.
A Yellow Trumpet Blossom – Buckeye, AZ – Fujifilm X70 – “Fujichrome Slide”
I really like the Fujichrome Slide recipe, but it’s not my first option for overcast conditions. It does well enough, but I’d go with Classic Kodak Chrome instead (which is already in the C1 custom preset slot). Unfortunately, there aren’t a lot of good options for dreary days that don’t use a white balance type that’s already taken for another category. Fujichrome Slide uses the Fluorescent 1 white balance type; if I wasn’t concerned about white balance type, I would consider Winter Slide or Porto 200 as better alternatives.
Morning Coffee – Glendale, AZ – Fujifilm X70 – “Kodak Color Negative”
The Kodak Color Negative Film Simulation Recipe is pretty versatile and does well in a number of situations—indoor is just one of them. It uses the Incandescent white balance type; if I wasn’t concerned about white balance type, I’d still choose it, but Agfa Optima would be a good alternative.
Night Synergy – Centerville, UT – Fujifilm X-T1 – “CineStill 800T”
The CineStill 800T recipe for X-Trans II cameras is my absolute favorite nighttime option, period. If it’s after dark and I’m photographing artificial lights, this is the recipe I’m using. CineStill 800T uses the Kelvin white balance type; if I wasn’t concerned about white balance type I’d still use this one.
Freedom – Buckeye, AZ – Fujifilm X70 – “Lomography Color 100”
In Parts 1-3, this category is called Alternative Process; however, for X-Trans II there’s only one recipe for that category—Cross Process—and it uses a white balance type that’s already taken. So I changed the rules a little, and called this category Wildcard instead, which is simply a recipe that’s included just because. Lomography Color 100 can produce good results in a number of situations, including golden hour, midday, shade, and indoors. It’s good for landscapes, street, and portrait photography. However, it has a little different aesthetic than the other recipes in this list. Lomography Color 100 uses the Shade white balance type; if I wasn’t concerned about white balance type, I’d choose Cross Process instead.
Jonathan with a Smile – Buckeye, AZ – Fujifilm X70 – “Monochrome Red”
The Monochrome Red Film Simulation Recipe is an excellent option for black-and-white photography. It’s especially well suited for blue-sky landscapes, but it does pretty well in other situations, too. It uses the Fluorescent 1 white balance type and shares the same shift as Fujichrome Slide, so both can occupy a slot in the C1-C7 custom presets simultaneously; if I wasn’t concerned about white balance type, the Monochrome recipe is a pretty good alternative—you really can’t go wrong with either.
Soft Rose – Buckeye, AZ – Fujifilm X-T5 – “Timeless Negative”
On February 3, 2021, Fujifilm shared the very first Nostalgic Neg. Film Simulation Recipe. As part of their promotion for the GFX100S, which was the first camera to have the new Nostalgic Neg. film sim, Fujifilm Japan shared a YouTube video, and hidden within was a recipe put together by the creators of Nostalgic Neg. “Nostalgic Negative is tuned for the best allrounder settings, but if you want to tweak it to get that classic American New Color look from the ’70’s, there are some adjustments you should make.” Fujifilm recommended, when using the Nostalgic Neg. film simulation, to set everything to 0, Off, or Auto, except for three things: shift Auto White Balance to +2 Red & -3 Blue, adjust Shadow to -2, and reduce Color to -2. Additional to that, I recommend using -4 High ISO NR.
I’m not a huge fan of Nostalgic Neg. set to factory defaults. It’s not bad, but it’s not what it purports to be, which is a vintage 1970’s aesthetic inspired by Eggleston, Shore, Sternfeld, and Misrach. I think Fujifilm should have had the courage to make their recipe the default, and not worry so much that it wasn’t the “best allrounder” film simulation. Fujifilm’s suggested adjustments do improve Nostalgic Neg. and bring it closer to a ’70’s vibe, but I felt I could improve it just a little more. Of course, that’s all subjective, and you might prefer factory default Nostalgic Neg., or Fujifilm’s recommended recipe, or something different altogether—in other words, when I say that this is “improved” it’s perfectly alright to disagree with that assessment, but hopefully many of you will agree that this is indeed better—at least a little, as my adjustments to Fujifilm’s recipe are pretty subtle. This particular recipe seems to be especially versatile, and can be used for many different genres of photography and in various light conditions—it looks good most anytime of the day or night.
This Timeless Negative Film Simulation Recipe is only compatible with (as of this writing) the Fujifilm X-T5, X-H2, and X-H2S. I assume that the GFX100S and GFX50S II can also use this recipe, but that it will render slightly different—I don’t have either of those cameras to test it to know for certain. Unless Fujifilm gives X-Trans IV cameras the Nostalgic Neg. film simulation, which I doubt they will do, this recipe is only for X-Trans V cameras, and maybe the latest GFX, too; however, Nostalgic Neg. isn’t too dissimilar from Eterna, so perhaps consider the Arizona Analog, SantaColor, Eterna V2, and Polaroid recipes as potential alternatives for those with X-Trans IV models.
Film Simulation: Nostalgic Neg. Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome FX Blue: Off White Balance: Auto, +2 Red & -3 Blue Dynamic Range: DR400 Highlight: +2 Shadow: -2 Color: -3 Sharpness: 0 High ISO NR: -4 Clarity: -2 ISO: Auto, up to ISO 6400 Exposure Compensation: -2/3 to +1/3 (typically)
Example photographs, all camera-made JPEGs using this “Timeless Negative” Film Simulation Recipe on my Fujifilm X-T5:
Dark Coffee – Buckeye, AZ – Fujifilm X-T5
Night Train – Williams, AZ – Fujifilm X-T5
Color Behind Frosted Glass – Williams, AZ – Fujifilm X-T5
Hot Hot Hot – Williams, AZ – Fujifilm X-T5
Sleigh Bell – Williams, AZ – Fujifilm X-T5
Round Trip Ticket – Williams, AZ – Fujifilm X-T5
Dusk Train – Williams, AZ – Fujifilm X-T5
Keep Off – Williams, AZ – Fujifilm X-T5
Please… Use RitchieCam – Williams, AZ – Fujifilm X-T5
Barricades – Williams, AZ – Fujifilm X-T5
ATSF Caboose – Williams, AZ – Fujifilm X-T5
Route 66 Gift Shop – Williams, AZ – Fujifilm X-T5
Car Above, Coke Below – Williams, AZ – Fujifilm X-T5
UnAmerican Experience – Williams, AZ – Fujifilm X-T5
Stop Route 66 – Williams, AZ – Fujifilm X-T5
Los Angeles, 1978 – Buckeye, AZ – Fujifilm X-T5
Looney Tune – Buckeye, AZ – Fujifilm X-T5
Backyard Trumpet Blossoms – Buckeye, AZ – Fujifilm X-T5
Comparison
Factory default Nostalgic Neg., except High ISO NR set to -4.
Nostalgic Neg. with Fujifilm’s suggested adjustments.
This new Timeless Negative Film Simulation Recipe.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
I get asked frequently to create Film Simulation Recipes that mimic the aesthetic of a certain film stock or the look of a particular photographer. In this case, it was the look of a specific photographer that I was asked to recreate. After viewing this person’s images, I thought that they had a lot of similarities with my Kodak Gold 200 recipe except with Superia greens and reds. So I programmed that recipe into my Fujifilm X100V, except with Classic Negative instead of Classic Chrome, plus I made a couple of small modifications. After testing it out, I felt that it produced pictures that were, in fact, quite similar to the photographer’s look. A few days went by, and by chance I stumbled upon some photographs captured with Fujicolor 100 film, and they looked pretty similar to this new recipe. After digging a little deeper, I found some more Fujicolor 100 pictures, and in the description of a few that seemed particularly similar, the photographer mentioned that they used an 81A warming filter.
I’ve heard it said that Fujifilm has historically saved their “best” films for Japan. Indeed, there are Fuji emulsions that, for whatever reasons, aren’t sold outside their home country. Fujicolor 100 is a one of those. I don’t know a whole lot about it (or if it is even still manufactured), but it is a consumer-grade color negative film. I believe that it’s a little warmer than most Fujicolor stocks, but that could also be a result of a warming filter, lens used, how shot, how developed, and/or how scanned, so I’m not completely certain of it. I didn’t model this recipe after Fujicolor 100, but it does seem at times to resemble it surprisingly closely.
Gated Camera Store – Phoenix, AZ – Fujifilm X100V – “Fujicolor 100 Gold”
Because this Fujicolor 100 Gold Film Simulation Recipe uses the Classic Negative film simulation, it’s not compatible with the Fujifilm X-T3 or X-T30, or any other camera without Classic Negative. It is intended for the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II models. Because X-Trans V renders blue deeper, if you use it on an X-T5, X-H2, or X-H2S it will look slightly different, which you might like or dislike or be indifferent to—give it a try and see what you think.
Classic Negative Dynamic Range: DR400 Highlight: -2 Shadow: +1 Color: +3 Noise Reduction: -4 Sharpness: -2 Clarity: -2 Grain Effect: Strong, Small Color Chrome Effect: Off Color Chrome Effect Blue: Off White Balance: Daylight, +4 Red & -5 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +2/3 to +1 1/3 (typically)
Example photographs, all camera-made JPEGs using this “Fujicolor 100 Gold” Film Simulation Recipe on a Fujifilm X100V:
Foto Forum – Phoenix, AZ – Fujifilm X100V
Gas Station Turned Diner – Williams, AZ – Fujifilm X100V
American Shooting Experience – Williams, AZ – Fujifilm X100V
66 Gifts – Williams, AZ – Fujifilm X100V
Hot Hare – Williams, AZ – Fujifilm X100V
Someday Sony – Phoenix, AZ – Fujifilm X100V
One of These is Not Like the Others – Phoenix, AZ – Fujifilm X100V
Self Reflection – Buckeye, AZ – Fujifilm X100V
Confused Santa – Williams, AZ – Fujifilm X100V
Look at this Flower – Buckeye, AZ – Fujifilm X100V
Girl by a Fountain – Buckeye, AZ – Fujifilm X100V
Water Feature – Buckeye, AZ – Fujifilm X100V
Fujifilm X-T5 in a Plant – Buckeye, AZ – Fujifilm X100V
A Pink Bloom – Buckeye, AZ – Fujifilm X100V
Garden Trumpets – Buckeye, AZ – Fujifilm X100V
Small Boats at a Dock – Lynx Lake, AZ – Fujifilm X100V
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Pilot – Cordes Lakes, AZ – Fujifilm X-T5 – “Kodachrome 64”
This isn’t a new Film Simulation Recipe; it’s simply a slight modification of my Kodachrome 64 recipe for X-Trans IV cameras to make it compatible with X-Trans V models. The adjustments are pretty simple: set Color Chrome FX Blue to Off and Shadow to +0.5. Why the Color Chrome FX Blue adjustment? I discovered that with Classic Chrome (and some other film simulations), X-Trans V cameras render blue deeper. Why the change to Shadow? I stated in the X-Trans IV version, “I would set Shadow to +0.5 if I were using these settings on [a] camera [with that option].” With those two modifications, the Kodachrome 64 recipe is ready for your Fujifilm X-Trans V camera!
Kodachrome was a brand-name of color reversal film made by Kodak between 1935 and 2009. There were three eras of Kodachrome: 1935-1960, 1961-1973, and 1974-2009. Each era produced a slightly different look, and the third era is the one you’re probably most familiar with. This recipe is intended to mimic the aesthetic of the third era of Kodachrome, specifically the ISO 64 emulsion.
This Kodachrome 64 Film Simulation Recipe is intended for Fujifilm X-Trans V models, which (as of this writing) include the X-H2, X-H2S, and X-T5 cameras. It’s compatible with newer GFX models too, but will likely render slightly different on those cameras. Those with an X-Pro3, X100V, X-T4, X-S10, X-E4, or X-T30 II, try the Kodachrome 64 recipe for those models (click here). Those with an X-T3 or X-T30, try the Kodachrome 64 recipe for those cameras (click here). For those with an X-Trans II model, there’s a Kodachrome 64 recipe for you, too (click here).
Film Simulation: Classic Chrome Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome FX Blue: Off White Balance: Daylight, +2 Red & -5 Blue Dynamic Range: DR200 Highlight: 0 Shadow: +0.5 Color: +2 Sharpness: +1 High ISO NR: -4 Clarity: +3 ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Kodachrome 64” Film Simulation Recipe on my Fujifilm X-T5:
Palm Tree Closeup – Palo Verde, AZ – Fujifilm X-T5
Abandoned Mobile Home – Arlington, AZ – Fujifilm X-T5
Store & Bar – Hassayampi, AZ – Fujifilm X-T5
Narrow Bridge – Arlington, AZ – Fujifilm X-T5
Concrete Railroad Ties & Steel Bridge – Arlington, AZ – Fujifilm X-T5
Gillespie Dam – Arlington, AZ – Fujifilm X-T5
Gila River Reeds – Arlington, AZ – Fujifilm X-T5
Flag, Bell, Cross – Arlington, AZ – Fujifilm X-T5
Princess Garden – Buckeye, AZ – Fujifilm X-T5
Secret Garden – Buckeye, AZ – Fujifilm X-T5
Blossomed Garden Rose – Buckeye, AZ – Fujifilm X-T5
Farm Truck – Buckeye, AZ – Fujifilm X-T5
Wall Shadow & Empty Pot – Buckeye, AZ – Fujifilm X-T5
Dusk Lamp – Buckeye, AZ – Fujifilm X-T5
Girl on Swing – Buckeye, AZ – Fujifilm X-T5
Desert Sunset – Buckeye, AZ – Fujifilm X-T5
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Short Train – Buckeye, AZ – Fujifilm X-T5 – “1970’s Summer”
This Film Simulation Recipe is the aesthetic that I hoped to achieve with the new Nostalgic Neg. film simulation. What does it resemble? It very much has a nostalgic Kodak “memory color” (as Fujifilm likes to say) that is reminiscent of old color photographs from the 1970’s. You might notice some similarities to William Eggleston’s Election Eve and 2 1/4 series and some of his other work from the late-1960’s through the mid-1970’s—not every picture, but certainly several. You might spot some similarities between this look and some of Stephen Shore’s photographs from the early-to-mid 1970’s. I think there are some similarities to a few of Joel Sternfeld’s American Prospects pictures. There’s a noticeable likeness to several of Richard Misrach’s desert photographs. In other words, this recipe produces a distinct 1970’s American New Color aesthetic.
It shouldn’t surprise you that the Nostalgic Neg. film simulation produces this look because Fujifilm stated that the American New Color movement was the inspiration. Specifically, they looked at the photographs of Eggleston, Shore, Sternfeld, and Misrach, but out-of-the-box default Nostalgic Neg. doesn’t seem to resemble their work all that closely. After examining many of their photographs, and identifying a few from each with a similar aesthetic, I set out to create a Film Simulation Recipe that better mimics some of their pictures. I feel like a got pretty close, and this recipe produces a distinct 1970’s vibe—especially the warmth of summertime—and so I named it 1970’s Summer. This recipe works best in sunny daylight, and is excellent for midday photography.
Going Out of Business – Prescott, AZ – Fujifilm X-T5 – “1970’s Summer”
This 1970’s Summer Film Simulation Recipe is only compatible with (as of this writing) the Fujifilm X-T5, X-H2, and X-H2S. I assume that the GFX100S and GFX50S II can also use this recipe, but that it will render slightly different—I don’t have either of those cameras to test it to know for certain. Unless Fujifilm gives X-Trans IV cameras the Nostalgic Neg. film simulation, which I doubt they will do, this recipe is only for X-Trans V cameras, and maybe the latest GFX, too; however, if you are looking for something somewhat similar, try my Vintage Color recipe, or even Kodak Portra 400 Warm.
Film Simulation: Nostalgic Neg. Grain Effect: Strong, Large Color Chrome Effect: Strong Color Chrome FX Blue: Strong White Balance: 6500K, -1 Red & -4 Blue Dynamic Range: DR400 Highlight: -2 Shadow: -0.5 Color: -2 Sharpness: -2 High ISO NR: -4 Clarity: -3 ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs using this “1970’s Summer” Film Simulation Recipe on my Fujifilm X-T5:
Red & Gold – Prescott, AZ – Fujifilm X-T5
Adventure’s First Stop – Prescott Valley, AZ – Fujifilm X-T5
Hyundai – Prescott, AZ – Fujifilm X-T5
Cat Clock – Prescott, AZ – Fujifilm X-T5
Propane – Hassayampa, AZ – Fujifilm X-T5
Security Light – Palo Verde, AZ – Fujifilm X-T5
Hay, Detour – – Arlington, AZ – Fujifilm X-T5
Gila River Bridge – Arlington, AZ – Fujifilm X-T5
13 FT 6 IN – Arlington, AZ – Fujifilm X-T5
Around the Bend – Arlington, AZ – Fujifilm X-T5
Gillespie Dam Bridge – Arlington, AZ – Fujifilm X-T5
Desert Dam – Arlington, AZ – Fujifilm X-T5
Julio Suarez – Arlington, AZ – Fujifilm X-T5
Dam Reflection – Arlington, AZ – Fujifilm X-T5
Broken Dam – Arlington, AZ – Fujifilm X-T5
Lakeview – Lynx Lake, AZ – Fujifilm X-T5
Attention Anglers – Lynx Lake, AZ – Fujifilm X-T5
Can’t See the Forest – Lynx Lake, AZ – Fujifilm X-T5
Rural Tree – Arlington, AZ – Fujifilm X-T5
Green Field – Buckeye, AZ – Fujifilm X-T5
Abandoned Rural Home – Palo Verde, AZ – Fujifilm X-T5
More Than Double Wide – Arlington, AZ – Fujifilm X-T5
Hole in the Wall – Arlington, AZ – Fujifilm X-T5
PRA – Arlington, AZ – Fujifilm X-T5
Abandoned & Leaning – Arlington, AZ – Fujifilm X-T5
Desert Basketball – Arlington, AZ – Fujifilm X-T5
Double Cross – Arlington, AZ – Fujifilm X-T5
Palm Trunk & Blocks – Arlington, AZ – Fujifilm X-T5
Fake Fall Flowers – Arlington, AZ – Fujifilm X-T5
Arlington Baptist Church – Arlington, AZ – Fujifilm X-T5
Gate 8 – Arlington, AZ – Fujifilm X-T5
Flowing Water & Broken Footbridge – Arlington, AZ – Fujifilm X-T5
Irrigation Mist – Buckeye, AZ – Fujifilm X-T5
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Lynx Lake Overlook – Lynx Lake, AZ – Fujifilm X-T5 – “Nostalgia Negative”
I spent $1,700 to get the Nostalgic Neg. film simulation. When I tried out-of-the-box default Nostalgic Neg., I was initially disappointed. It didn’t seem like anything special, or even particularly nostalgic. After a closer look, I saw the potential. The Nostalgic Neg. film simulation is like a cross between Eterna and Classic Chrome. It has soft tonalities in the shadows like Eterna, and warm colors are similar to Eterna, but with contrast and an overall palette more similar to Classic Chrome. There are some aspects that aren’t necessarily like either Eterna or Classic Chrome, but, for the most part, if Eterna and Classic Chrome had a baby, it would be Nostalgic Neg.
For this first Fujifilm X-Trans V Film Simulation Recipe, I wasn’t trying to emulate any specific film or process. I just wanted something that looked good. I simply attempted to create a better Nostalgic Neg., something that I would like shooting with. I hoped that perhaps it would even evoke feelings of nostalgia—that’s why I call this recipe Nostalgia Negative—and it would produce a vintage analog-like aesthetic. I think it does.
I really like this recipe for daylight situations. It does quite well in both midday and golden hour light. It’s pretty decent in shade, too. It’s not particularly well suited for indoor artificial light or nighttime photography, so I would avoid it for that. Otherwise, use it for landscapes, portraits, urban—it will look good for pretty much any genre of photography. I think this will be an instant favorite recipe for those with the latest cameras. Because this recipe uses Clarity, you cannot use the HEIF format, because HEIF disables Clarity. Also, for those who aren’t aware, Clarity causes the camera to pause briefly after each shot, similar to the amount of time it takes to advance to the next frame of film on an analog camera. I have Smooth Skin Effect Off, but I’m sure it’s fine if you enable it, either Weak or Strong, if you prefer.
Two Ducks – Lynx Lake, AZ – Fujifilm X-T5 – “Nostalgia Negative”
This Nostalgia Negative Film Simulation Recipe is only compatible with (as of this writing) the Fujifilm X-T5, X-H2, and X-H2S. I assume that the GFX100S and GFX50S II can also use this recipe, but that it will render slightly different—I don’t have either of those cameras to test it to know for certain. Unless Fujifilm gives X-Trans IV cameras this film simulation, which I highly doubt that they will, this recipe is only for X-Trans V, and maybe the latest GFX, too; however, my Nostalgic Negative recipe for X-Trans IV cameras is actually not too far off from the Nostalgic Neg. film simulation, so you might appreciate using that recipe while you wait to get a camera with the new film simulation.
Film Simulation: Nostalgic Neg. Grain Effect: Strong, Small Color Chrome Effect: Strong Color Chrome FX Blue: Weak White Balance: Daylight, +3 Red & -3 Blue Dynamic Range: DR400 Highlight: -1 Shadow: +1 Color: +4 Sharpness: -1 High ISO NR: -4 Clarity: -3 ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this new “Nostalgia Negative” Film Simulation Recipe on my Fujifilm X-T5:
Blue Tree – Lynx Lake, AZ – Fujifilm X-T5
Lake Log – Lynx Lake, AZ – Fujifilm X-T5
311 – Lynx Lake, AZ – Fujifilm X-T5
Caution: Nature – Lynx Lake, AZ – Fujifilm X-T5
To – Buckeye, AZ – Fujifilm X-T5
Believer – Lynx Lake, AZ – Fujifilm X-T5
CVS Obscured – Buckeye, AZ – Fujifilm X-T5
Golden Tower – Buckeye, AZ – Fujifilm X-T5
The Burmister – Prescott, AZ – Fujifilm X-T5
Dusk Blazer – Buckeye, AZ – Fujifilm X-T5
Spiderweb Rocks – Buckeye, AZ – Fujifilm X-T5
Don’t Shoot – Buckeye, AZ – Fujifilm X-T5
Warning – Buckeye, AZ – Fujifilm X-T5
Triumph – Buckeye, AZ – Fujifilm X-T5
Golden Light Chair – Buckeye, AZ – Fujifilm X-T5
Lake Rocks – Lynx Lake, AZ – Fujifilm X-T5
Log on the Lake – Lynx Lake, AZ – Fujifilm X-T5
Brush Above the Water – Lynx Lake, AZ – Fujifilm X-T5
Private Dock – Lynx Lake, AZ – Fujifilm X-T5
PFG Boy – Lynx Lake, AZ – Fujifilm X-T5
Amanda – Lynx Lake, AZ – Fujifilm X-T5
Forest Abstract – Lynx Lake, AZ – Fujifilm X-T5
Last Light on the Desert Mountain Ridge – Buckeye, AZ – Fujifilm X-T5
This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.
Today’s SOOC live broadcast started out well. Very well, in fact. A lot of you tuned in—even Fujirumors! There was a lot of participation. It was on pace to be one of the best episodes yet!
Then it all came to an abrupt end.
When you do a live broadcast, there’s bound to be some trouble. Especially since we’re doing this from two different continents, there’s a lot of opportunities for technical difficulties. If you’ve watched a couple SOOC broadcasts before, you’ve likely seen some of these unfortunate issues. It’s expected that things won’t go completely according to plan, and there will be some minor hiccups here and there. Today’s hiccup was far from minor. At almost the two-hour mark, as we were nearing the end of the show (but not at the end—we still had plenty to say), YouTube cut us off. The broadcast just ended, mid-sentence. We were suddenly done. We tried to get it up-and-running again, but that was a failure, too, due to additional technical difficulties.
If you didn’t watch it live, you can view the broadcast below—just know that it ends quite abruptly when it shouldn’t. It’s incomplete.
I have to apologize for this. There’s a lot of problems that we can work through. “The show must go on,” is the saying, and normally that’s what we do. There was no going on from this, though—it was a fatal flaw. The broadcast was over, and we couldn’t salvage it. I’m really sorry, because you gave up a lot of your time to tune in and participate. We want to give you our best, and we couldn’t do that. It’s embarrassing. I hope that our situation wasn’t too much trouble for you.
Nathalie and I want to finish the show. We tried to do that today, but it didn’t work out. So, instead, we’ll finish the episode with a Part 2 on Tuesday, November 22nd, at 9:30 AM Pacific Time, 12:30 Eastern. We’d like to finish our discussion of the recipe-of-the-month, Kodak Ektachrome 100SW (here and here), reveal the giveaway winner, and make a special announcement. Those are the things we couldn’t say today because we were cutoff. This special edition Part 2 on Tuesday will be a much shorter show. I hope that you can join us live!
For those who don’t know, SOOC is a monthly live video series, with each episode focused on a different Film Simulation Recipe. It is a collaboration between Tame Your Fujifilm (Fujifilm X-Photographer Nathalie Boucry) and Fuji X Weekly (Ritchie Roesch). SOOC is a fun and educational experience where we not only talk about Fujifilm camera settings, but also answer your questions and give tips and tricks. Basically, we’re trying to help you master your Fujifilm camera, with a focus on simplifying your photographic workflow. It’s also interactive, and your participation makes it great!
I want to say a big “thank you” to everyone who submitted pictures using the Fujichrome Sensia 100 Film Simulation Recipe! The Viewers’ Images slideshow video is below, so be sure to take a look!
When should you use which Film Simulation Recipes on your Fujifilm X-Trans III camera? With so many recipes to choose from, it can be difficult to know what recipe you should select in a given situation, and this article is intended to help you with that. If you haven’t read Part 1, it’s important to do so because it explains what exactly we’re doing—the backstory—which is important to understand. There’s a video to watch in that article, too. Take a moment right now to hop on over to Part 1 (click here) before continuing on with this post, if you haven’t viewed it already. Also, check out Part 2 (click here) if you missed that.
Like Part 2, I set out to recommend seven recipes, one for each C1-C7 Custom Preset, that don’t share the same white balance type, because X-Trans III cameras—X-Pro2, X100F, X-E3, X-T2, X-T20 & X-H1—cannot remember a White Balance Shift within the C1-C7 Custom Presets. If two recipes share the same white balance type but not the same shift, then when you switch presets you must remember to adjust the shift, too. That can be inconvenient and frustrating, so my best solution is to program recipes that use different white balance types and/or share the same white balance type and shift. The user experience is much improved, but you might not be able to program all of your favorite recipe at the same time, which is the one downside to doing this. It was a difficult task, but I think I came up with a good set for you.
If you have a Fujifilm X-T3 or X-T30, you can use these recipes, too, by simply setting Color Chrome Effect to Off. Also, if you have a newer X-Trans IV camera (or X-Trans V), you can use these recipes by additionally setting Color Chrome FX Blue to Off, Clarity to 0, and choosing a Grain size (either Small or Large).
For sunrise or sunset photography, this “Improved Velvia” Film Simulation Recipe is one of your best bets! It’s great anytime of the day or night when you need vibrant colors, so it has a lot of versatility, but it is especially nice during “golden hour” when the sun is low to the horizon. This recipe uses the Auto white balance type; if I wasn’t concerned about white balance type, I’d probably still choose this recipe.
Pear Blossom Day – Farmington, UT – Fujifilm X-T30 – “Kodak Gold 200”
“Midday” is simply daylight conditions outside of when the sun is low to the horizon, and for this category I’m recommending Kodak Gold 200. Even though this is a recipe for the X-T3/X-T30, it is fully compatible with X-Trans III cameras. It’s great for sunny conditions—midday or otherwise—and is good for landscapes and portraits. If you have this programmed into your camera, you’re going to use it a lot, perhaps more than any of the others. It uses the Daylight white balance type; if I wasn’t concerned about white balance type, I’d still choose this one, although each in the alternatives list are excellent options, too.
Pink Rose Blossom – Ogden, UT – Fujifilm X-T30 – “Ektachrome E100GX”
If it’s a rainy, overcast day, the Ektachrome E100GX is an excellent Film Simulation Recipe to try. It’s also great for many daylight situations, so it offers good versatility. This recipe uses the Fluorescent 2 white balance type; if I wasn’t concerned about white balance type I would choose Fujicolor Superia 800 instead, but this is a close second-best, and I feel good about recommending it anyway.
Cameras and Coffee – South Weber, UT – Fujifilm X-T30 – “Color Negative”
For natural light indoor photography, I recommend the Color Negative Film Simulation Recipe, which is another one that’s intended for the X-T3/X-T30, but is fully compatible with X-Trans III cameras. It uses the Fluorescent 1 white balance type; if I wasn’t concerned about white balance type I would choose Agfa Optima 200 instead, but this is still a solid option.
For nighttime or indoor artificial light situations, try the Fujicolor NPL 160 Tungsten Film Simulation Recipe. It does especially well for “blue hour” photography at dusk or dawn, when the sun is below the horizon. This recipe uses the Fluorescent 3 white balance type; if I wasn’t concerned about white balance type, I would choose CineStill 800T instead, but this is a good second-best.
Suburban Abstract – Buckeye, AZ – Fujifilm X-H1 – “Xpro”
There aren’t very many options for this category, but the Xpro recipe is an excellent recipe, producing a cross-process aesthetic. It uses the Kelvin white balance type; if I wasn’t concerned about white balance type, I would probably choose the Cross Process recipe instead, but this is quite similar, so you can’t go wrong either way.
Alternatives for “alternative process” photography:
Doll – Bountiful, UT – Fujifilm X-H1 – “Analog Monochrome”
Last but certainly not least is black-and-white, and for that I recommend the Analog Monochrome Film Simulation Recipe. This recipe is really good for most situations. It uses the Incandescent white balance type; if I wasn’t concerned about white balance type, I would be happy with this recipe or any in the alternatives list below, which are all good.
Specifically, I set out to create a Film Simulation Recipe that could make a good option for “golden hour” or “midday” daylight photography—potentially a solid choice for C1 or C2 in your camera. I wanted it to have a classic Kodak aesthetic—perhaps a bit nostalgic, like from the 1970’s or 1980’s, maybe somewhat similar to Kodacolor—but not modeled after any specific film. Something classic and warm and clearly Kodak-like. I really like what I came up with, and I think many of you will, too!
Saguaro Green – Buckeye, AZ – Fujifilm X-T30 – “Classic Kodak”
This “Classic Kodak” Film Simulation Recipe is compatible with the X-T3 and X-T30 cameras, and, because it doesn’t use Color Chrome Effect, it’s also compatible with X-Trans III models. To use this recipe on newer X-Trans IV (and X-Trans V) cameras, simply set Color Chrome FX Blue to Off, Clarity to 0, and choose a Grain size (either Small or Large).
Classic Chrome Dynamic Range: DR400 Highlight: -2 Shadow: +1 Color: +4 Noise Reduction: -4 Sharpness: -1 Grain Effect: Strong Color Chrome Effect: Off White Balance: Shade, -1 Red & +2 Blue ISO: Auto up to ISO 6400 Exposure Compensation: +1/3 to +1
Below are all camera-made JPEGs captured using this “Classic Kodak” Film Simulation Recipe on my Fujifilm X-T30:
Clocktower – Buckeye, AZ – Fujifilm X-T30
Center on Main – Buckeye, AZ – Fujifilm X-T30
5 & 6 – Goodyear, AZ – Fujifilm X-T30
Water Fountain – Buckeye, AZ – Fujifilm X-T30
Circle Around the Roofline – Buckeye, AZ – Fujifilm X-T30
Old Doll Head For Sale – Buckeye, AZ – Fujifilm X-T30
Unlit Bulbs and Rainbow – Buckeye, AZ – Fujifilm X-T30
Rainbow Hidden in the Trees – Buckeye, AZ – Fujifilm X-T30
Small Yellow Leaves – Buckeye, AZ – Fujifilm X-T30
Dressed in Pink – Buckeye, AZ – Fujifilm X-T30
Green Garden Leaves – Buckeye, AZ – Fujifilm X-T30
Palm Branches in the Sky – Buckeye, AZ – Fujifilm X-T30
Sonoran Desert Mountains – Buckeye, AZ – Fujifilm X-T30
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
When should you use which Film Simulation Recipes on your Fujifilm X-T3 or X-T30 camera? With so many recipes to choose from, it can be difficult to know what recipe you should select in a given situation, and this article is intended to help you with that. If you haven’t read Part 1, it’s important to do so because it explains what exactly we’re doing—the backstory—which is important to understand. There’s a video to watch in that article, too. Take a moment right now to hop on over to Part 1 (click here) before continuing on with this post, if you haven’t viewed it already.
What makes Part 2 more challenging than the first article is that the X-T3 and X-T30 cameras cannot remember a White Balance Shift within the C1-C7 Custom Presets. If two recipes share the same white balance type but not the same shift, then when you switch presets you must remember to adjust the shift, too. That can be inconvenient and frustrating, so my best solution is to program recipes that use different white balance types and/or share the same white balance type and shift. The user experience is much improved, but you might not be able to program all of your favorite recipe at the same time, which is the one downside to doing this. What I set out to do with this article is recommend seven recipes, one for each C1-C7 Custom Preset, that don’t share the same white balance type, or, if they do, share the same shift. It turned out to be a somewhat impossible task, but I think I came up with a good set for you.
Also, if you have a newer X-Trans IV camera (or X-Trans V), you can use these recipes, too, by simply setting Color Chrome FX Blue to Off, Clarity to 0, and choosing a Grain size (either Small or Large). While Part III will cover X-Trans III, some of these recipes are compatible with X-Trans III cameras; the key is to look for whether they call for Color Chrome Effect or not—if not, it’s compatible with X-Trans III. Also, X-Trans III recipes are fully compatible with the X-T3 and X-T30 (just set Color Chrome Effect to Off), but I avoided those recipes for this article because I wanted to save them for Part 3.
Fujichrome Sensia 100 is one of my favorite recipes for sunrise and sunset colors. It does pretty well throughout the entirety of “golden hour” but when the sky is pink and purple and red it does especially well. This recipe is an excellent option for shade, and does pretty well in many situations, including natural light portraits, so it has some good versatility. It uses the Fluorescent 2 (sometimes called Neon 2) white balance type; if I wasn’t concerned about white balance type, I would strongly consider Kodak Portra 400 v2 instead of this one, but I do think Fujichrome Sensia 100 is a solid choice for “golden hour” photography.
This was actually a really touch decision because there are so many great options for “midday”—which simply is daylight outside of “golden hour”—and I had to choose one, so I went with Kodak Vision3 250D. This is such a good (and underutilized) recipe, and does well in a number of situations, including “golden hour” and shade and portraits and (of course) midday. It uses the Fluorescent 1 (sometimes called Neon 1) white balance type; if I wasn’t concerned about white balance type, I could go with Kodachrome 64 or Kodak Portra 160 or Kodak Gold 200 or (of course) Kodak Vision3 250D and be very happy with any of them, they’re all good.
Winter Reeds – Farmington, UT – Fujifilm X-T30 – “Classic Slide”
The Classic Slide recipe is one of my top choices for heavy overcast, rainy, dreary days. It’s also good for shade or midday or even “golden hour” photography—it’s another recipe with some good versatility. It uses the Daylight white balance type; if I wasn’t concerned about white balance type, I’d still choose this one, but Negative Print is a good runner up.
Cinematic Negative is a very versatile recipe, and I like it for all of the situations we’ve talked about above, but I also like it for indoor photography, both natural light and (to an extent) artificial light (although I would consider a “Nighttime” recipe below as a first choice for artificial light). It uses the Incandescent white balance type; if I wasn’t concerned about white balance type, Analog Color would be my top choice for indoor natural light photography, but Cinematic Negative is a close second, so I’d be happy to have it in C4, where it could also be used for a number of other situations.
Wet Glass Bokeh – Salt Lake City, UT – Fujifilm X-T30 – “Jeff Davenport Night”
If it’s between dusk and dawn, especially if there are city lights, Jeff Davenport Night is the recipe to use. Period. It uses a Kelvin white balance type; if I wasn’t concerned about white balance type I’d still use this recipe, no questions asked.
Bloom Purple – South Weber, UT – Fujifilm X-T30 – “Expired Eterna”
The “Alternative Process” category is a fun one. These are recipes you probably wouldn’t use all of the time, only occasionally just for the joy of it. I chose “Expired Eterna” because of the white balance type—Auto—but if I wasn’t concerned about white balance type, I would choose Redscale, Cross Process Film, or Kodak Elite Chrome 200 Color Fade—any of them, they’re all fun. Vintage Color Fade also uses Auto white balance, but I didn’t choose it because it requires double-exposures, which can be tricky, but if you’re up for the challenge, go with that one instead.
Alternatives for “alternative process” photography:
The Obscurity of Light – Farmington, UT – Fujifilm X-T30 – “Dramatic Monochrome”
Last but not least is B&W, and for that I chose Dramatic Monochrome, which is a good recipe that I really like. It uses Auto white balance without a shift; however, the other Auto white balance recipe (Expired Eterna above) does use a shift. How I would handle this is I wouldn’t worry about the shift for this recipe, just use the shift of Expired Eterna, because, while white balance shift does affect black-and-white pictures, it’s not as big of an impact as color images, and it won’t significantly change the aesthetic of Dramatic Monochrome—only subtly—and you’re not likely to notice, so I just wouldn’t worry about it. If I wasn’t concerned about white balance type, I would choose Kodak Tri-X 400 (read the article for that recipe to see how to make it compatible with the X-T3 and X-T30), because it is my favorite Film Simulation Recipe.
Airstream – Pismo Beach, CA – Fujifilm X-E4 – “Chrome Slide”
This Film Simulation Recipe is a bit of a mystery to me. I recently found it in my C1-C7 custom presets on my Fujifilm X-E4, simply named Exp. After shooting with it, I quickly remembered that I had created it back in July, and then for some unknown reason stopped using it. In the weeks and months that passed, I somehow completely forgot all about it. Here’s what I do know: while I was traveling over the summer, someone had asked me to create a certain look, which I believe was of a particular photographer and not a specific film stock (although I am not fully certain of that), and so I did, but now I have no idea who asked (because I get many requests) or who the photographer was that I was attempting to mimic. I’m not sure if I was close to successful or not, as I don’t really remember a whole lot of anything about it. I did find on an SD card the pictures that I had captured with the recipe over the summer. I began using it again just recently, and I really appreciate the results—I think many of you might, too. In fact, it could be a new favorite recipe for some of you!
While I don’t believe that this recipe was modeled after any specific film stock, it does remind me a little of Ektachrome. Over the years there have been around 40 different emulsions that Kodak has given the brand name Ektachrome to, not to mention that one film may have had numerous updates and revisions (Ektachorme E100, for example), so it can be tough to know exactly which “Ektachrome” this might most closely resemble. Maybe E100 or E200 or even Elite Chrome? I’m certain that it’s not an exact match to any, but to me it has a general Ektachrome “memory color” (as Fujifilm puts it). Since I’m not sure what it most closely resembles, I’m simply calling it Chrome Slide.
This Film Simulation Recipe is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. I believe that it is also compatible with X-Trans V models, such as X-H2, X-H2S, and the upcoming X-T5. Those with newer GFX cameras should be able to use it, too, although it will render slightly differently. Unfortunately, it is not compatible with the X-T3 or X-T30.
Classic Negative Dynamic Range: DR400 Highlight: +1 Shadow: +1 Color: +4 Noise Reduction: -4 Sharpness: 0 Clarity: +3 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Strong White Balance: Daylight, -3 Red & +1 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: 0 to +2/3 (typically)
Example photographs, all camera-made JPEGs using this “Chrome Slide” Film Simulation Recipe on a Fujifilm X-E4:
Patriotic Boat – Morro Bay, CA – Fujifilm X-E4
Surf Rider – Pismo Beach, CA – Fujifilm X-E4
Elephant Seal Along Rocky Shore – San Simeon, CA – Fujifilm X-E4
Sport Bird – Avila Beach, CA – Fujifilm X-E4
Sunset Storm – Buckeye, AZ – Fujifilm X-E4
Layers & Repeated Shapes – Morro Bay, CA – Fujifilm X-E4
Public Guitarist – Pismo Beach, CA – Fujifilm X-E4
Billiards – Redlands, CA – Fujifilm X-E4
Ice House – Avila Beach, CA – Fujifilm X-E4
Urban Bikes – Pasadena, CA – Fujifilm X-E4
Pine Layers – Pine, AZ – Fujifilm X-E4
Small Flowers Near Tree – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Hexagon Waterdrops – Pine, AZ – Fujifilm X-E4
October Oak – Pine, AZ – Fujifilm X-E4
Wet Pine – Pine, AZ – Fujifilm X-E4
Singular Rose Bloom – Buckeye, AZ – Fujifilm X-E4
Water Falling Under The Bridge – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Small Waterfall – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
I get asked all of the time when to use which Film Simulation Recipe. With over 250 on the Fuji X Weekly App to choose from, it can be difficult to know when each recipe should be chosen. Besides, you only have C1-C7 Custom Presets on your Fujifilm camera (most of you, anyway). Which seven recipes should you have programed? When should you select them?
The problem with trying to answer this question is that it’s a highly subjective endeavor. While I might like a certain recipe for a particular situation, you might not. There’s not a right or wrong answer, just what works for you and what doesn’t—and I cannot say whether any particular recipe will work for you or not. Only you can answer that for yourself, and you have to try a recipe to know. With that said, I attempt to give good advice. In each SOOC broadcast I recommend a few recipes for various situations. Still, I’ve really struggled with how to be helpful to those asking for direction—that is until I watched a video by Grainydays, a YouTube channel about film photography, in which photographer Jason Kummerfeldt tries to give advice on when to use which film stocks. You can view it below:
Jason has a similar dilemma. Since film choice is such a personal thing, how do you say when to use which? It’s the same thing for Film Simulation Recipes. His solution is simply to demonstrate what he uses and state what he likes, and maybe you’ll like it too; I’m going to do the same thing for recipes. I’ll tell you what my preferences are, and invite you to try them too if you want. If you don’t want, that’s cool. There’s not any one way—and especially no right or wrong way—to do this. Instead, figure out what works for you, and do that. If you’re not sure, perhaps this article will be helpful to you.
I’m going to suggest seven recipes for you to program into your Fujifilm camera, and state when to use each. Since recipes are (for the most part) generationally specific, I’m going to make this a series of articles to cover most Fujifilm models. In this first one we’ll cover “newer” X-Trans IV cameras: X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II. This should also apply to X-Trans V cameras (from the reports I’ve received, X-Trans IV recipes are fully compatible with X-Trans V, although I have not tested this myself to know for certain) and newer GFX models (although the rendering will be slightly different).
Kodak Portra 400 v2 is a recipe that does well at anytime during daylight hours, and as the name suggests it is a good option for portrait photography, but I’m going to recommend it specifically for “golden hour” near sunrise and sunset. This really could be your primary use-all-of-the-time recipe, and that’s why I suggest placing it in C1, but when the sun is low to the horizon, make sure that this is the one you’re shooting with. I personally use this recipe frequently.
Denny’s Days – Beaver, UT – Fujifilm X-E4 – “Kodachrome 64”
Kodachrome 64 is another one that could be your go-to everyday-use recipe, but specifically I want to suggest it for daytime (non-“golden hour”) photography. Obviously it can also be used for when the sun is low to the horizon, too, but I think it is one of the best options for when the sun is not low—from mid-morning to mid-afternoon. This is one of the few recipes that you’ll almost always find programmed into my camera.
Evening Clouds Over Wasatch Mountains – Farmington, UT – Fujifilm X-E4 – “Kodak High Definition Plus 200”
If it’s thick overcast and rainy, the Kodak High Definition Plus 200 recipe is an excellent option. Yes, it’s pretty good in daylight, too (even “golden hour”), but give it a try on drab overcast days—I think you’ll really appreciate just how well it does in that situation.
For natural light indoor photography, my top choice is the Kodak Ultramax 400 recipe. This is another great all-rounder that could be used in pretty much any daytime situation and produce excellent results, but specifically I’m recommending it for natural light indoor pictures. For artificial-light indoor images, use the recipes for nighttime photography below.
11th Street – Astoria, OR – Fujifilm X100V – “Serr’s 500T”
If it’s after dark, my top choice for nighttime or artificial light photography is Serr’s 500T. This is a very blue recipe, so it isn’t a good option for many daytime situations, but from just past sunset to just prior to sunrise, this is the one that I would most recommend, especially if there are warm artificial lights.
For an alternative process recipe—a fun option for unusual results—my top recommendation is Xpro ’62. Use it anytime of the day or night, as it is surprisingly versatile. The results will be different, and perhaps unexpected, yet the experience will be a lot of fun, so give it a try!
Alternatives for “alternative process” photography:
Round Window – Pismo Beach, CA – Fujifilm X100V – “Kodak Tri-X 400”
My all-time favorite recipe is Kodak Tri-X 400, so it should come as no surprise that it is my top recommendation for monochrome photography. It’s not the most popular recipe on Fuji X Weekly, but it is the most popular B&W recipe. Definitely give this one a try if you’ve never done so before.
You have plenty to choose from, because I just suggested to you 42 different Film Simulation Recipes! Of course, there are so many other recipes that I could have listed—just because one didn’t make this list doesn’t mean that it’s not good; however, I do feel that this is a good set—not only the seven suggestions, which I believe are a winning C1-C7 combination, but the alternative options, too. With that said, don’t let an exclusion from this list discourage you from trying a particular recipe, because you never know when one just “clicks” for you, and you find a new favorite. The top picture in this article was captured with a recipe that I didn’t recommend, yet I do really like that recipe and do recommend it, and I even use it myself sometimes, including recently. It’s a good reminder that this is all subjective, and you might not prefer any of my recommendations, but instead have seven that I didn’t mention as your C1-C7 custom presets. So, I guess, the conclusion is to try every recipe until you find the ones you love and fulfill your photographic needs—but, if you’re not sure, maybe start with these 42.
Next up will be recipes for “older” X-Trans IV cameras—the X-T3 and X-T30.
I went down a pretty deep rabbit hole. I started researching cinematographer Greig Fraser, which led to investigating other great cinematographers, such as Roger Deakins, Rodrigo Prieto, Hoyte van Hoytema, Caleb Deschanel, and several more. I spent quite a bit of time learning about various motion picture techniques. I came to the conclusion that cinematographers often better understand light than many photographers. By “understand light” I mean 1) light qualities, 2) how light is rendered on what it is being captured on, 3) how to use or manipulate light so that it is rendered precisely as intended, and 4) how light affects moods and emotions. Granted, a movie has a whole team of people who’s job it is to control and manipulate the light, but the cinematographer (working with the director) is the one in charge of it.
You might notice when watching a movie that the colors and color cast change from scene-to-scene. The way you respond when viewing a predominately blueish scene is much different than a reddish scene. The colors, among other things, trigger certain responses from the viewers, and cinematographers use this extensively, and often brilliantly. Sometimes it’s quite obvious, and sometimes it’s much more subtle, and you might not even notice unless you’re paying careful attention. If you understand light similarly to a cinematographer, you could do the same thing in your photography.
Another thing that I stumbled across is gear. Obviously film and digital have different aesthetics—digital is much easier to work with, especially when it comes to incorporating special effects and CGI, but it can come across as clean, clinical, and soulless. Film has more character and a different feel, but is much more difficult to work with. There are also digital-film hybrid techniques. Whatever method is used will affect the final aesthetic. Some cinematographers like working with modern lenses, and some—like Greig Fraser—prefer vintage lenses because they have more character. Filters are a big part of the process. Color correction filters (to control the light) and diffusion filters (to give atmosphere) are pretty common. I was surprised to learn that some cinematographers like putting water, silicone, dirt, etc., on the filter to dirty them, and some even like shooting through glass (in-between the camera and the subject).
This is probably more than you ever wanted to know, but I think it’s important to understand for this recipe. First, the light you shoot in will affect how pictures are rendered (definitely not unique to this recipe, but worth noting). Cool light will give a cool color cast, warm light will give a warm color cast. You’ll want to think about the light—how it will render—and the mood or emotions you want to convey in your photographs. Second, inspired by Greig Fraser, I used vintage lenses for these photographs, mostly a Helios 44-2. You don’t have to use vintage glass, but I do think it helps to achieve the desired aesthetic. Third, for most of these images (especially if there was a bright light source) I used a 5% CineBloom diffusion filter. What I appreciate about this filter is that it’s quite subtle. The 5% CineBloom filter is not a requirement for this recipe, but it helps give it a filmic look, especially when there are bright highlights, so I do recommend it if you have one.
This “Cinematic Negative” Film Simulation Recipe isn’t modeled after any specific motion picture film, but is more inspired by a generic daylight-balanced cinema film aesthetic after researching a number of different cinematographers. It is compatible with the Fujifilm X-T30 and X-T3 cameras. To use it on newer X-Trans IV cameras (X-Pro3 and newer) plus X-Trans V, set Color Chrome FX Blue to Off, Clarity to 0 (or -2 in lieu of the 5% CineBloom filter), and decide on either Grain size Small or Large. For the X-H1, you can use this recipe if you ignore Color Chrome Effect; however, it will render slightly differently. I used the 16:9 aspect ratio for some of these photographs, but use whichever aspect ratio you prefer.
Eterna Dynamic Range: DR400 Highlight: +1 Shadow: +2 Color: +4 Noise Reduction: -4 Sharpness: -1 Grain Effect: Weak Color Chrome Effect: Strong White Balance: Incandescent, +8 Red & -9 Blue ISO: Auto up to ISO 6400 Exposure Compensation: 0 to +2/3
Below are all camera-made JPEGs captured using this “Cinematic Negative” Film Simulation Recipe on my Fujifilm X-T30:
Horseplay – Buckeye, AZ – Fujifilm X-T30
Scrabble – Buckeye, AZ – Fujifilm X-T30
Palms Trees – Glendale, AZ – Fujifilm X-T30
Bougainvillea Blue – Buckeye, AZ – Fujifilm X-T30
Crisscross Contrails – Buckeye, AZ – Fujifilm X-T30
Last Light on Rooftop – Glendale, AZ – Fujifilm X-T30
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
Rainfall on the Desert Mountains – Fort McDowell, AZ – Fujifilm X-E4 – “KodaNeg NC”
I’m asked pretty regularly if I can create a Film Simulation Recipe that mimics a certain look—usually a particular film stock, but occasionally the aesthetic of a certain photographer. These recipes began as an attempt to recreate the look of a certain photographer. Unfortunately, despite much effort, I wasn’t successful. When I say “much effort” I mean that I went as far as having conversations with this photographer (which is pretty cool, because he’s well known and respected) to try and find out what he does to get his signature aesthetic. I tried some pretty unconventional tactics to get his look straight out of camera, but in the end I determined that it’s not possible with Fujifilm’s current JPEG options. Still, I really liked one of the recipes that I created while trying (and failing) to mimic the look, so I began using it.
Right around this same time someone asked if I could create a recipe that better mimics the Kodak Ektar 100 aesthetic from a particular photographer (as one film can produce many different looks depending on a host of factors). When I saw the images, my first thought is that it looked a lot like this new recipe, except with the color turned way up. So I turned Color up from -4 to +4, and the results were surprisingly similar to Ektar. An exact match? No, but definitely in the ballpark, and certainly close enough that if one is looking for an alternative Kodak Ektar 100 recipe, this is one to consider.
Red Bench – Tonto Natural Bridge SP, AZ – Fujifilm X100V – “KodaNeg VC”
I stated that I did something unconventional to create this recipe: I used a 1/4 Black Pro Mist diffusion filter, and I did so because it has a slight reddish-brown color cast. Normally I prefer CineBloom filters because they don’t have a color cast, but for this recipe it was necessary. If you have a 10% CineBloom you can use that instead; however, it will be slightly less warm. If Fujifilm allowed .5 adjustments to White Balance Shift, you could move a half-point towards red and achieve basically the same thing, but they don’t. I find that +7 Red is too strong when not using a Black Pro Mist, so I would definitely stick with +6, even though it is less warm. After creating the Black Pro Mist version, I set out to make an alternate version that does not use a diffusion filter, yet produces a similar look (albeit slightly less warm due to the lack of Black Pro Mist filter). So there are four Film Simulation Recipes in total here: two low-saturation options (with a without a Black Pro Mist filter), and two high-saturation options (also with and without a Black Pro Mist filter).
When Kodak introduced Portra, it initially came in two varieties: VC (“vivid color”) and NC (“neutral color”). The VC emulsion was more optimized for landscape photography and the NC emulsion was more optimized for portrait photography. These recipes aren’t intended to mimic Kodak Portra, but I decided to barrow the VC and NC abbreviations anyway—the two VC recipes are optimized for landscapes, while the two NC recipes are optimized for portraits. You can clearly see this in the two sets of images below.
Fujifilm X-E4 — “KodaNeg VC”
Fujifilm X-E4 — “KodaNeg NC”
Fujifilm X-E4 — “KodaNeg VC”
Fujifilm X-E4 — “KodaNeg NC”
I named these recipes “KodaNeg” because they have warm Kodak-like colors… maybe like Kodak color negative film paired with an 81A or 81B warming filter—color correction filters were fairly commonly used back in the film days, and 81A was probably the most popular among landscape photographers. Which Kodak color negative film? I didn’t model these after any specific film, so they don’t closely resemble any; however, the NC recipes are slightly Portra-like, and the VC recipes are slightly Ektar-like, but are not exact match to either.
If you have a 1/4 Black Pro Mist diffusion filter, I invite you to try the two KodaNeg recipes below that are intended for use with a diffusion filter. If you don’t have a Black Pro Mist—no worries—use the two recipes that are intended to be used without a diffusion filter. Unfortunately, because these require Clarity and Color Chrome Effect, they’re not compatible with the X-T30 and X-T3. Those with X-Trans V cameras should be able to use these recipes, but I do not have any personal experience to know for certain.
Use this recipe in conjunction with a 1/4 Black Pro Mist Filter. Alternatively, you can use this with a 10% CineBloom, but the results will be slightly different.
Provia Dynamic Range: DR400 Highlight: -1 Shadow: +1 Color: +4 Noise Reduction: -4 Sharpness: 0 Clarity: +3 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Off White Balance: Auto, +6 Red & -6 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured using this “KodaNeg VC” recipe with my Fujifilm X100V:
Dead Tree & Four Peaks – Fort McDowell, AZ – Fujifilm X100V
Red Rock – Tonto Natural Bridge SP, AZ – Fujifilm X100V
Sunlight Sky & Golden Trees – Pine, AZ – Fujifilm X100V
Barely Autumn – Pine, AZ – Fujifilm X100V
Handcrafted – Pine, AZ – Fujifilm X100V
Back of Sign – Pine, AZ – Fujifilm X100V
I is for Ice – Pine, AZ – Fujifilm X100V
Window Wash Bucket – Payson, AZ – Fujifilm X100V
KodaNeg NC (with Diffusion Filter)
X-Pro3, X100V, X-T4, X-S10, X-E4, & X-T30 II
Fujifilm X70 on a Bed – Pine, AZ – Fujifilm X100V – “KodaNeg NC”
Use this recipe in conjunction with a 1/4 Black Pro Mist Filter. Alternatively, you can use this with a 10% CineBloom, but the results will be slightly different.
Provia Dynamic Range: DR400 Highlight: -1 Shadow: +1 Color: -4 Noise Reduction: -4 Sharpness: 0 Clarity: +3 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Off White Balance: Auto, +6 Red & -6 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured using this “KodaNeg NC” recipe with my Fujifilm X100V:
Power Pole – Pine, AZ – Fujifilm X100V
Lamp Sky – Pine, AZ – Fujifilm X100V
Pines & Oaks – Pine, AZ – Fujifilm X100V
Water Dripping Over Cliff – Tonto Natural Bridge SP, AZ – Fujifilm X100V
This recipe is intended to be used without a diffusion filter. Because it requires +0.5 Shadow, this recipe isn’t directly compatible with the Fujifilm X100V or X-Pro3, but if you want to use it anyway, you’ll have to decide if you prefer Shadow set to 0 or +1—the results will be slightly different, either with a little more or less contrast.
Provia Dynamic Range: DR400 Highlight: -1 Shadow: +0.5 Color: +4 Noise Reduction: -4 Sharpness: 0 Clarity: -3 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Off White Balance: Auto, +6 Red & -6 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured using this “KodaNeg VC” recipe with my Fujifilm X-E4:
Saguaro & Four Peaks – Fort McDowell, AZ – Fujifilm X-E4
Pine Creek Trail – Tonto Natural BridgeSP, AZ – Fujifilm X-E4
Cactus Rock – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Red Hills – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Little Blooms in the Forest – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Oak Autumn – Pine, AZ – Fujifilm X-E4
Yellow Tree in the Forest – Pine, AZ – Fujifilm X-E4
Touch of Autumn – Pine, AZ – Fujifilm X-E4
Forestscape – Pine, AZ – Fujifilm X-E4
KodaNeg NC (without filter)
X-T4, X-S10, X-E4, & X-T30 II)
Desert Storm – Fort McDowell, AZ – Fujifilm X-E4 – “KodaNeg NC”
This recipe is intended to be used without a diffusion filter. Because it requires +0.5 Shadow, this recipe isn’t directly compatible with the Fujifilm X100V or X-Pro3, but if you want to use it anyway, you’ll have to decide if you prefer Shadow set to 0 or +1—the results will be slightly different, either with a little more or less contrast.
Provia Dynamic Range: DR400 Highlight: -1 Shadow: +0.5 Color: -4 Noise Reduction: -4 Sharpness: 0 Clarity: -3 Grain Effect: Weak, Small Color Chrome Effect: Strong Color Chrome Effect Blue: Off White Balance: Auto, +6 Red & -6 Blue ISO: Auto, up to ISO 6400 Exposure Compensation: +1/3 to +1 (typically)
Example photographs, all camera-made JPEGs captured using this “KodaNeg NC” recipe with my Fujifilm X-E4:
Clouds Over Trees – Pine, AZ – Fujifilm X-E4
Rural Elk – Pine, AZ – Fujifilm X-E4
Hidden Elk – Pine, AZ – Fujifilm X-E4
Electric Forest Rain – Pine, AZ – Fujifilm X-E4
Eave Drops – Pine, AZ – Fujiifilm X-E4
White Cloud – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Storm Behind Trees – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Little Red Berries & Cloud – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Smoke Stack – Pine, AZ – Fujifilm X-E4
Mountain Trees – Tonto Natural Bridge SP, AZ – Fujifilm X-E4
Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!
The Fuji X Weekly App now has Widgets! This can transform how you use the Fuji X Weekly App, turning your home screen into a Film Simulation Recipe launchpad!
If you have an iOS device, you now have this new feature—if your iPhone or iPad didn’t update automatically, be sure to manually do it now. Those with Android devices don’t fret, as Widgets are in the works for Android, too.
What are Widgets? Larger than app icons, Widgets give you quick access to information or provide a different way to interact with the app. Specifically to Fuji X Weekly, you now have six Widgets to choose from: Newest Recipes (one recipe), Newest Recipes (two recipes), Recipe of the Day, Selected Recipe, Recipe Detail, and The Big X.
For Newest Recipe Widget, you have two options: small and medium. The small Widget is a shortcut to the newest recipe, and displays the lead photo of the recipe, which, when tapped, will take you right to it in the Fuji X Weekly App. The medium Widget is a shortcut to the two newest recipes, displaying the lead photo of each, and will take you to whichever of the two recipes that you tap. These Widgets are excellent for those who don’t always visit the Fuji X Weekly Blog, yet want to know when a new recipe is released.
The Recipe of the Day Widget is for when you’re not sure which recipe to use. Each day a new Film Simulation Recipe is provided, and the exact recipe will be different for each user. Between this and the Random Recipe selector, you should be able to find a recipe to use whenever you find yourself stuck for one. This Widget could be incorporated into an interesting project, such as using a different recipe each day for 30 days, or something like that. Today, on my iPhone, Kodak Portra 400 v2 is my Recipe of the Day.
Next is Selected Recipe, which is my personal favorite Widget. You can have quick access to any of the over 250 recipes right on your home screen! In order to use this, you have to tap-and-hold on the Widget, then select Edit Widget, then choose the recipe you want. Tap the Widget to open the recipe in the Fuji X Weekly App.
Recipe Detail displays the parameters of a recipe in a medium-sized Widget. To set it up, you have to tap-and-hold on the Widget, then select Edit Widget, then choose the recipe you want to display. Tap the Widget to see the recipe in the App.
Finally, there’s the Big X, which is just a four-times-size Fuji X Weekly App icon, should you find the regular-sized one to be too small.
The wonderful thing about these Widgets is that you can have as many as you’d like. If you want just one, or seven, or 20—there’s no limit! My iPhone has literally been taken over by Fuji X Weekly Widgets, and it’s transformed how I interact with the App, turning my home screen into a Film Simulation Recipe launchpad.
How do you add Widgets to your iPhone? Tap-and-hold anywhere on your home screen (except directly over an app icon), which will make all of your icons wiggle. Tap the plus in the top-left corner, which opens the Widget menu. You can either scroll down to find the Fuji X Weekly App in the app list and tap on it, or simply search for Fuji X Weekly in the search bar at the top. Find the Fuji X Weekly App Widget that you want to add to your home screen, and tap Add Widget. You can move the Widget to wherever you want on your home screen. I have several pages that are nothing but Fuji X Weekly Widgets! You can also add Fuji X Weekly Widgets to the Today View screen.
Don’t have the Fuji X Weekly App? Download it for free today (Apple here, Android here)! Consider becoming a Patron to unlock the best App experience and to help support this website.
