Fujifilm X-T1 (X-Trans II) Film Simulation Recipe: Scanned Negative

Mountain Reeds – Farmington, UT – Fujifilm X-T1 – “Scanned Negative”

I was playing around with white balance shift, and came across some settings that I thought looked interesting. I wasn’t attempting to mimic any specific film or process, but was simply experimenting with tints. I’m pretty well acquainted with white balance shift, but I was searching for inspiration—and I found it!

While this film simulation recipe wasn’t modeled after any specific film, what it reminded me of is an improperly color-corrected negative film scan. You see, color negative film is orange (because of the yellow and magenta masks), and when scanned and inverted into a positive image, it will have a green-cast that needs to be color corrected. Some scanners will do this automatically, and some will require manual adjustments. If not color corrected completely right, the picture can have a color cast that might seem a little off—in this case, slightly too green (depending on the light), but not by a lot (and not always). In any event, I think this recipe has a certain mood that’s definitely interesting in the right situations.

Sidewalk Bell – Bountiful, UT – Fujifilm X-T1 – “Scanned Negative”

This “Scanned Negative” film simulation recipe is compatible with all X-Trans II cameras that have the PRO Neg. Std film simulation. The XQ1, XQ2, and X10 I believe don’t have this film simulation, so it’s not compatible with those cameras. If you have an X-Pro1 or X-E1, feel free to try this recipe, too, although the results will be slightly different.

PRO Neg. Std
Dynamic Range: DR200
Highlight: -1 (Medium-Soft)
Shadow: 0 (Standard)
Color: -2 (Low)
Sharpness: 0 (Standard)
Noise Reduction: -2 (Low)
White Balance: 5300K, -5 Red & -4 Blue
ISO: Auto up to ISO 3200

Exposure Compensation: +1/3 to +2/3 (typically)

Example photographs, all camera-made JPEGs captured on my Fujifilm X-T1 using this “Scanned Negative” film simulation recipe:

Classic Adventures Parked – Farmington, UT – Fujifilm X-T1
Open Sign – Layton, UT – Fujifilm X-T1
Yellow Poncho – Bountiful, UT – Fujifilm X-T1
Icy Hose – Bountiful, UT – Fujifilm X-T1
Reflected, Not Reflected – Bountiful, UT – Fujifilm X-T1
Stairway to Nativity – Bountiful, UT – Fujifilm X-T1
Post & Trashcan – Bountiful, UT – Fujifilm X-T1
Ivy & Winter Home – Bountiful, UT – Fujifilm X-T1
Snow On Green Bush – Bountiful, UT – Fujifilm X-T1
Neighborhood in Winter Snow – Farmington, UT – Fujifilm X-T1

See also: Fujifilm X-Trans II Film Simulation Recipes
Find this film simulation recipe and over 200 more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

4 comments

  1. David D · January 25

    I love this recipe; will it work with a X100V?

    Liked by 1 person

    • Ritchie Roesch · January 25

      It’s not directly compatible with the X100V, and will definitely look different, but don’t be afraid to try it anyway. You might like it, or you might not.

      Like

  2. theBitterFig · January 26

    Here’s where I lament the limitations of the X-E2 with White Balance settings. I can have different K=xx00 values with the different film simulations, but only one (R,B) pair, and it’s currently locked in at (-1,-1) with my hybrid of the X-Trans II and X-Trans III Cinestill 800T recipies. I just can’t give up my Cinestill.

    Is there another setting which would be somewhat close to 5300K?

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s