Fujifilm X-Pro3 (X-Trans IV) Film Simulation Recipe: Agfa Ultra 100

Mutual Conversation – Salt Lake City, UT – Fujifilm X-Pro3 – “Agfa Ultra 100”

Agfa Ultra 100 was a short lived film—introduced in 2003 and discontinued in 2005, although it was still available for a few years after—and was Agfa’s most vibrant color negative film. I’ve been attempting to mimic this film for a little while now (ever since I published the AgfaChrome RS 100 recipe last summer), but I couldn’t get it right. This Agfa Ultra 100 recipe actually has some similarities to the AgfaChrome RS 100 recipe, and (for this particular attempt) I used that recipe as the starting point. I never used this film, so I relied on online references and a couple pictures I found in an old magazine article as samples.

I’m actually not fully satisfied with this recipe. I think sometimes it’s pretty spot-on, and I think other times it is significantly off. Of course, one film can have several different aesthetics depending on how it was shot, developed, scanned and/or printed, and viewed, so perhaps that accounts for some of it. I think an argument can be made that Color should be +3 or even +4, but I also feel that sometimes that’s too much and +2 is just right. I think green is the least correct color, and if you do have a lot of green in the shot, you might consider increasing Color to +3 or +4 for a more accurate facsimile, although you might find reds and blues are rendered too strong if you do that.

Urban Sunstar – Salt Lake City, UT – Fujifilm X-Pro3 – “Agfa Ultra 100”

Because this recipe uses Classic Negative, Clarity, and Color Chrome FX Blue, this Agfa Ultra 100 film simulation recipe is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras.

Classic Negative
Dynamic Range: DR400
Highlight: +2
Shadow: -2
Color: +2
Noise Reduction: -4
Sharpness: -1
Clarity: -3
Grain Effect: Weak, Large
Color Chrome Effect: Strong
Color Chrome Effect Blue: Strong
White Balance: Daylight, -2 Red & +3 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: 0 to +1 (typically)

Example photographs captured using this “Agfa Ultra 100” film simulation recipe on a Fujifilm X-Pro3:

Red – Salt Lake City, UT – Fujifilm X-Pro3
Blu – Salt Lake City, UT – Fujifilm X-Pro3
Orange – Salt Lake City, UT – Fujifilm X-Pro3
Walker Reflected – Salt Lake City, UT – Fujifilm X-Pro3
Common Signs – Salt Lake City, UT – Fujifilm X-Pro3
Pitched In Street Sign – Salt Lake City, UT – Fujifilm X-Pro3
Elevator – Salt Lake City, UT – Fujifilm X-Pro3
Street Crossing – Salt Lake City, UT – Fujifilm X-Pro3
Sidewalk Seat Shadow – Salt Lake City, UT – Fujifilm X-Pro3
Blue Boxes – Salt Lake City, UT – Fujifilm X-Pro3
Urban Congo – Salt Lake City, UT – Fujifilm X-Pro3
Sidewalk Closed In 150 Feet or Less – Salt Lake City, UT – Fujifilm X-Pro3

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X-Pro3 Amazon B&H
Fujifilm X100V Amazon B&H
Fujifilm X-T4 Amazon B&H
Fujifilm X-S10 Amazon B&H
Fujifilm X-E4 Amazon B&H
Fujifilm X-T30 II Amazon B&H

Find this Film Simulation Recipe and over 200 more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

20 comments

  1. Hank Fanelli · February 14, 2022

    Love your formulas but please be more specific on how to make the settings via the specific menu on the X100V can’t seem to get there easily

    • Ritchie Roesch · February 15, 2022
      • Laurent · September 9

        nice do you think this could be used with x-t5? any recommanded adjustment in that case?

      • Ritchie Roesch · September 9

        Simply set Color Chrome FX
        Blue to Weak instead of Strong.

  2. Nigel Hart · February 14, 2022

    The “Blu” tram is amazing.

  3. Justin · February 15, 2022

    That red parking meter is everything!

  4. votive1991 · February 18, 2022

    Love this, many thanks. Can’t wait to try this on my x pro 3 when weather is decent here

  5. Justin · April 3, 2022

    The more I look at this receipe and these photos, it reminds me of Martin Parr’s earlier work. It’s much more of a match than Kevin Mullins recipe.

    With a slight boost to the shadows I think it would be spot on match. I like the images to be a bit more punchy.

    Great job. Love it.

    • Ritchie Roesch · April 5, 2022

      That’s an interesting observation. It does look similar! I think maybe Shadow -1, Color +3, and Clarity -2, and it would be closer. Thanks for the input!

      • Justin · April 5, 2022

        That is awesome. I had edited your recipe and that is similar to what I had been using. The colours from it are so reminiscent of early Parr especially when you get a scene with those beautiful primary colours. That is where it really shines! Contrasting reds and blues in a scene are to die for with this. Thanks for the feedback.

  6. Justin · April 26, 2022

    Have you seen these examples?

    These are very contrast rich but quite nice.

    Would you consider going a V2?

    https://matthewdallow.co.uk/blog/tag/agfa/

    • Ritchie Roesch · May 4, 2022

      I don’t think I saw these specific ones. Obviously one film can produce many different aesthetics based on a whole host of factors. I’ll definitely take a look! Thank you for your suggestion!

  7. Pingback: Agfacolor, with Striking Verdant Green – Film Recipes for Fujifilm Cameras
  8. Greg v · June 17

    Oh this is great for getting this 90s style news shot

    https://photos.app.goo.gl/EAbtR1gqV97aVjk49

    • Ritchie Roesch · June 21

      I can definitely see the similarity. Thanks for sharing!

Leave a Reply to Ritchie RoeschCancel reply