Fujifilm X100V (X-Trans IV) Film Simulation Recipe: Pulled Fujicolor Superia

Salt Lake Shorelands – Layton, UT – Fujifilm X100V – “Pulled Fujicolor Superia”

After creating the Scanned Superia and Portra-Style film simulation recipes, which use D-Range Priority Auto, I wanted to create a recipe that utilized D-Range Priority Strong. You might recall that Anders Lindborg made an interesting discovery that D-Range Priority (DR-P) is essentially the same thing as Hypertone on Fujifilm Frontier scanners. In my own experiments, I’ve come to the conclusion that D-Range Priority Weak is more practical for everyday photography than D-Range Priority Strong, because, unless there is a bright light in the frame, DR-P Strong tends to be too flat, since it maximizes dynamic range. Undeterred, I set out to create a nice recipe that utilizes DR-P Strong.

I call this recipe “Pulled Fujicolor Superia” because it is similar to Fujicolor Superia Xtra 400 film that’s been pulled one stop. Of course, how any emulsion is shot, developed, printed and/or scanned has an impact on its aesthetic, and one film can have many different looks. I didn’t set out to recreate the look of pulled Superia film, but, in fact, it does look surprisingly close to some examples I found. It’s better to be lucky than good, right? I wouldn’t say that this is 100% spot-on for pulled Superia 400 film, but it’s not far off at all.

Break – Salt Lake City, UT – Fujifilm X100V – “Pulled Fujicolor Superia”

Because this recipe uses the Classic Negative film simulation, Clarity, and Color Chrome Effect Blue, it is compatible with the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II cameras. I think it works best on sunny days, but I did use it with some success in overcast and indoor situations.

Classic Negative
Dynamic Range: D-Range Priority Strong
Color: +3
Noise Reduction: -4
Sharpening: -2
Clarity: +2
Grain Effect: Weak, Small
Color Chrome Effect: Strong
Color Chrome Effect Blue: Strong
White Balance: Daylight, -4 Red & -2 Blue
ISO: Auto, up to ISO 6400
Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs using this “Pulled Fujicolor Superia” film simulation recipe on my Fujifilm X100V:

Packed Parking Garage – Salt Lake City, UT – Fujifilm X100V
Dee’s – Salt Lake City, UT – Fujifilm X100V
Salt Lake Shoreland Preserve Boardwalk – Layton, UT – Fujifilm X100V
Wetland Grass & Mountains – Layton, UT – Fujifilm X100V
Grass – Layton, UT – Fujifilm X100V
Fence & Hidden Building – Layton, UT – Fujifilm X100V
Playing Pokemon – Layton, UT – Fujifilm X100V
Looking Through Binoculars – Layton, UT – Fujifilm X100V
My Four Kids – Layton, UT – Fujifilm X100V
Jonathan at f/3.6 – Farmington, UT – Fujifilm X100V
Yellow & Green Grass – Farmington, UT – Fujifilm X100V
Pops of Fall – Fruit Heights, UT – Fujifilm X100V
A Little Splash of Autumn – Fruit Heights, UT – Fujifilm X100V

Find this film simulation recipe and many more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!

$2.00

3 comments

  1. Khaled Abdeen · October 29, 2021

    What about the tone curve

    • Ritchie Roesch · October 30, 2021

      It uses Dynamic Range Priority, which disables the tone curves (Highlight & Shadow), so you cannot set them.

  2. Pingback: Top Articles of October (Plus Some You Might Have Missed) | FUJI X WEEKLY

Leave a Reply