FXW App: Filter by White Balance — How To Use This New Feature

The Fuji X Weekly App was updated just yesterday, and I want to discuss one of the new features that I think will be heavily used: Filter by White Balance! This feature is unlocked by becoming a Fuji X Weekly App Patron.

Filter by White Balance will be a game-changer for many of you. The most obvious use is for finding recipes that match the lighting conditions. Is it sunny? Find a recipe that uses the Daylight White Balance. Is it indoors in mixed lighting? Maybe Auto White Balance would be good. But there’s another way to use Filter by White Balance, which I’ll discuss below, that will make your Fujifilm experience even better!

If your Fujifilm camera is older than the X-Pro3, you cannot save White Balance Shift within the C1-C7 Custom Presets, and each time you change Presets, you have to remember to adjust the WB Shift. It can be a little annoying. However, for each White Balance type, the camera will remember one WB Shift, so if each of your C1-C7 presets uses a different White Balance type, when you switch Presets, you won’t have to adjust the WB Shift. Amazing!

Let’s take a more practical look at this. If you have a Fujifilm X-T3 (for example), we’ll Filter by Camera and select the camera. For the X-T3, you’ll have over 70 recipes to choose from!

Let’s select one recipe to be our C1 in the Custom Settings menu. We’re now going to Filter by White Balance, and tap Auto—there are nearly 40 recipes to choose from! If you find more than one that requires the same WB Shift—Classic Chrome and Velvia both use +1R & -1B, and Velvia v2 and Dramatic Monochrome both use 0R & 0B, just as a couple examples—you can actually use multiple recipes from this White Balance type, and potentially program more than just C1. For this example we’re going to pick just one, perhaps Eterna v3 (interestingly, Agfa Optima 200 shares this same shift, and could be used, too), to be our C1 preset.

For C2 we’re going to select Daylight. There are 12 options to choose from. Kodak Portra 160, Kodak Portra 400, and Kodak Gold 200 all share the same WB Shift, so, in theory, you could program all three of these into your Custom Settings presets. For this, let’s go with Kodak Tri-X 400 to be our C2.

Next, for C3, let’s select Kelvin. You have 15 to choose from. Let’s choose maybe Jeff Davenport Night.

For C4 we’ll go with the Fluorescent 1 White Balance. There are just two options, and we’ll select Kodak Vision3 250D.

It’s the same story for Fluorescent 2: there are only two options. We’ll choose Ektachrome E100G to be our C5 preset.

For C6 we’ll select Incandescent. There’s just one recipe: Eterna Bleach Bypass, so we’ll program that one in.

Lastly, we have C7, and for that we’ll select Shade. There are three options, and we’ll go with Porto 200.

Now we have our C1-C7 Custom Settings presets programmed! C1 is Eterna v3. C2 is Kodak Tri-X 400. C3 is Jeff Davenport Night. C4 is Kodak Vision3 250D. C5 is Ektachrome E100G. C6 is Eterna Bleach Bypass. And C7 is Porto 200. That’s a pretty good set! Since each preset uses a different White Balance type, you won’t have to adjust the WB Shift when you switch presets. For those White Balance types that don’t have very many options, such as Fluorescent 1, Fluorescent 2, etc., if you didn’t like any of the choices, you could alternatively use two recipes that share both the same White Balance and WB Shift (such as the ones mentioned earlier).

You can come up with multiple combinations of these C1-C7 options, and keep track of them using the new colored Stars. Maybe use Green Stars for these seven recipes, and come up with another seven that can be used together and mark them with Blue Stars, and another seven that are marked with Purple Stars. Just an idea.

I hope this all makes sense. Filter by White Balance can be useful in more than one way. If your camera is older than the X-Pro3, this will make your Fujifilm experience more enjoyable, as you won’t have to remember to check the WB Shift each time you change presets. If you don’t have the Fuji X Weekly App, download it now. If you do have the App and it didn’t automatically update, be sure to visit the appropriate App Store and manually update it. If you are not a Fuji X Weekly App Patron, for the best App experience, consider becoming a Patron today!

9 comments

  1. rederik75 · November 27

    Hi Ritchie! Thanks for this last update, it definitely convinced me to become a patron! Just one suggestion: it would be useful if the “order by” choice may be saved as it happens with the filter… Everytime I start the app I must choose again the alphabetical (or whatever else) order.
    Anyway, it’s a great app, together with your immense work it surely deserves the patron support!

    Liked by 1 person

    • Ritchie Roesch · November 27

      Thank you for your kindness and feedback! It’s supposed to save. Are you on Android or Apple? Which device? We’ll get it fixed. Much appreciated!

      Liked by 1 person

      • rederik75 · November 27

        Android 11, it’s a Motorola Moto G Pro

        Liked by 1 person

      • Ritchie Roesch · November 27

        Great, thanks!

        Liked by 1 person

      • rederik75 · December 4

        Still speaking of android, I noticed that the WB filter option “kelvin” is not available…

        Liked by 1 person

      • Ritchie Roesch · December 4

        Thank you! We’ll get this sorted out, hopefully quickly.

        Liked by 1 person

  2. Pingback: Top Articles of November (Plus Some You Might Have Missed) | FUJI X WEEKLY
  3. Pingback: Fuji X Weekly: Top 21 Articles of 2021 | FUJI X WEEKLY
  4. Pingback: Fujifilm X-H1 (X-Trans III + X-T3 & X-T30) Film Simulation Recipe: Analog Monochrome | FUJI X WEEKLY

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s