Fujifilm X-T1 (X-Trans II) Film Simulation Recipe: Kodacolor 200

Pumpkin – Farmington, UT – Fujifilm X-T1 – “Kodacolor 200”

For this recipe, I was attempting to recreate a Kodak Portra 400 NC aesthetic. A couple of decades ago, Portra (both the ISO 160 and ISO 400 emulsions) came in two versions: NC (“Neutral Color”) and VC (“Vivid Color”). Kodak later revised the film to be something in-between the two, which they simply called Portra 160 and Portra 400. This recipe is, I believe, in the general ballpark of Portra 400 NC, but not exactly right; however, I like the results anyway. So if this recipe is close to Kodak Portra 400 NC, why did I call it Kodacolor 200? Because I think it is actually a little closer to Kodacolor 200, which is a variety of Kodacolor VR, and related to ColorPlus 200. I wouldn’t call it an exact match to Kodacolor 200, but that’s the film this is most likely closest to. If you want a Portra 400 NC or Kodacolor 200 aesthetic, this recipe is relatively similar to both.

There’s a fair amount of contrast produced by this recipe, which looks really good in conditions without harsh light. In bright daylight, the contrast might be a little too much, perhaps more closely resembling push-processed film, or (to a lessor extent) even bleach-bypassed Portra. On bright days, you might consider dropping both Shadow and Highlight to +1 if you find it to be too contrasty. I believe this film simulation recipe produces its best results when the sun is a little obscured, but not heavy overcast; however, it’s possible to get good results in many different circumstances. If your X-Trans II camera has Classic Chrome, I invite you to give this recipe a try—it’s a great high-contrast, low saturation option.

Power Pole Cup – Farmington, UT – Fujifilm X-T1 – “Kodacolor 200”

Classic Chrome
Dynamic Range: DR200
Highlight: +2 (Hard)
Shadow: +2 (Hard)
Color: -2 (Low)
Sharpness: -1 (Medium-Soft)
Noise Reduction: -2 (Low)
White Balance: 3200K, +8 Red & -8 Blue
ISO: Auto up to ISO 3200

Exposure Compensation: 0 to +2/3 (typically)

Example photographs, all camera-made JPEGs captured on my Fujifilm X-T1 using this Kodacolor 200 film simulation recipe:

Phragmites – Farmington, UT – Fujifilm X-T1
Touch of Red – Salt Lake City, UT – Fujifilm X-T1
Pumpkin Stem – Farmington, UT – Fujifilm X-T1
Autumn Shrub – Farmington, UT – Fujifilm X-T1
Ground Leaves – Farmington, UT – Fujifilm X-T1
Neighborhood Autumn Tree – Farmington, UT – Fujifilm X-T1
Creek Path in Autumn – Farmington, UT – Fujifilm X-T1
Narrow Path – Farmington, UT – Fujifilm X-T1
Old Mile Post – Farmington, UT – Fujifilm X-T1
Delicate Fibers – Farmington, UT – Fujifilm X-T1

Find this film simulation recipe and many more on the Fuji X Weekly — Film Recipes App!

Help Fuji X Weekly

Nobody pays me to write the content found on fujixweekly.com. There’s a real cost to operating and maintaining this site, not to mention all the time that I pour into it. If you appreciated this article, please consider making a one-time gift contribution. Thank you!



  1. Pingback: Creative Collective 002: When Film Simulation Bracket Is Actually Useful | FUJI X WEEKLY
  2. Patrick · May 14, 2022

    I have a question, does this still work on an X-Trans IV sensor? I’m a little confused

Leave a Reply to PatrickCancel reply