Fujifilm recipes | FUJI X WEEKLY

White Balance & Film Simulation Recipe Versatility

Posted on January 16, 2024 by Ritchie Roesch

Which Film Simulation Recipes are the most versatile? What makes a particular Recipe especially versatile, anyway? What does White Balance have to do with any of it? These are questions that I get asked pretty regularly, so I thought I would answer them today.

Let’s start with White Balance, including White Balance Shift. In the analog days, with a few exceptions, film was either Daylight-balanced or Tungsten-balanced. Daylight-balanced film, as you can imagine, was intended for use in sunny daytime scenarios, with a Kelvin temperature around 5500-5600K. Tungsten film was intended for artificial light scenarios, with a Kelvin temperature around 3200K. Because film was made for one of two specific light situations, you had three basic options for use outside of those scenarios: 1) accept the results for what they are, 2) use Color Correction Filters to adjust the Kelvin temperature to more closely match the light, or 3) use lighting equipment to artificially make the light match the film.

*Fujifilm X100V — Fujicolor NPS 160 Pulled*

Digital cameras have a large number of White Balance options, which, when combined with WB fine-tuning (Fujifilm calls it WB Shift), can match the precise light that you are photographing in. If the White Balance is exactly correct for the light, things that are pure white in real life will appear pure white in the photograph, no color tint. But, just because the White Balance is technically correct, doesn’t mean that it is artistically correct. Nobody said that the White Balance must always be spot-on accurate—maybe you don’t want it to be, for aesthetic reasons. In fact, in the film days, it was quite common for the Kelvin temperature to be a mismatch for the light, at least a little. Kodak—the most popular film maker—was known for making emulsions with a warm color cast. In other words, achieving a perfectly accurate White Balance, which wasn’t particularly common until somewhat recently, might not be desirable. However, in the digital age with Auto White Balance, we’re often used to having a highly accurate White Balance in our photographs, and seeing it not spot-on accurate can perhaps be a bit unnerving, especially if it is pretty far off.

Many of the Fuji X Weekly Film Simulation Recipes are facsimiles of actual film stocks, and often that means using a fixed White Balance. Unless you have Color Correction Filters or are artificially lighting the scene to match the White Balance (both of which are unlikely), if the scene’s light is a mismatch for the Recipe, you can get undesirable results sometimes (just like with film). My best advice is to use a Film Simulation Recipe that is a match for the scene. For example, Fluorescent Night might be a better choice for nighttime photography than 1970’s Summer, since the former is more like Tungsten-balanced and the latter is more like Daylight-balanced. Sometimes the best Recipe for a particular light situation might be obvious, and other times it might not be, and trial-and-error is necessary to figure it out—my Which Film Simulation Recipe, When? series is intended to help out with this.

Not all of the Recipes use a fixed White Balance; instead, some call for Auto White Balance. Newer Fujifilm cameras actually have three AWB options: Auto White Priority, Auto, and Auto Ambience Priority. White Priority leans cooler in artificial light than standard Auto, while Ambience Priority leans a little warmer in artificial light. All three AWB options are intended to produce reasonably accurate White Balances in all light situations. Because of this, Recipes that use AWB tend to be a lot more versatile than Recipes with a fixed White Balance, since you can use them in all sorts of light situations, and not just one. This is much less film-like, but perhaps can be equated to carrying a bunch of different Color Correction Filters with you all of the time. The easiest way to find my Film Simulation Recipes that use AWB is to Filter By White Balance (available to App Patrons) in the Fuji X Weekly App.

White Balance and WB Shift are probably the largest factor in determining the versatility of a particular Recipe, but it’s far from the only factor. Film Simulation, Dynamic Range, Highlight and Shadow, Color, etc., all play a role. One Recipe that uses AWB might be more versatile than another that also uses AWB, and some Recipes that use a fixed White Balance can be surprisingly versatile. However, what one person likes might be different from another, since each person has their own unique tastes. I might like a particular Recipe for a specific scenario, but you might dislike it for that exact same situation.

The pictures in this article were all captured with Film Simulation Recipes that use AWB and that I find to be especially versatile. Use them anytime of the day or night, in any light situation, and for any subject. If you want a versatile option to program into your Fujifilm camera, those are ones to consider. But they are far from the only versatile Recipes, and they might not be the best, either. If one of them stands out to you, I definitely invite you to try it.

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X-T5 in black:  Amazon  B&H  Moment
Fujifilm X-T5 in silver:  Amazon  B&H  Moment
Fujifilm X100V in black: Amazon   B&H  Moment
Fujifilm X100V in silver: Amazon B&H  Moment

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

The Essential 7 Film Simulation Recipes to Program Into Your Fujifilm Camera First — Part 6: X-Trans I

Posted on January 10, 2024 by Ritchie Roesch

*Sunset Branch* – Bountiful, UT – Fujifilm X-Pro1 – Color Analog

Part 1 — X-Trans V, Part 2 — X-Trans IV, Part 3 — X-T3/X-T30, Part 4 — X-Trans III, Part 5 — X-Trans II

I frequently get asked: which seven Film Simulation Recipes should I program into my camera first? I’ve published over 300 on this website and in the Fuji X Weekly App, and the choices can become overwhelming. I’ve attempted to help out with this dilemma several times, including the Which Film Simulation Recipe, When? series, Try These 3 Film Simulation Recipes No Matter Your Fujifilm Camera, The 10 Best Film Simulation Recipes on the Fuji X Weekly App, Top 25 Most Popular Film Simulation Recipes of 2023, and many others. My hope is that these types of articles help you to find some good Recipes to try, in case you’re not sure where to begin or what to use. This post is Part 6 of the series, and the final installment.

The list of Film Simulation Recipes below are my “Essential 7” for X-Trans I cameras, which are the X-Pro1, X-E1, and X-M1 (the X-M1 doesn’t have the PRO Neg. Hi and PRO Neg. Std film sims, so it is a bit more limited; it doesn’t have C1-C7, either). If you are not sure which Recipes to program into your C1-C7 Custom Presets, these are my suggestions for you to begin with. These are the ones that you must try, in my opinion. You might love all of them, you might only appreciate some of them, or you might not like any of them. Each person has their own styles and tastes, and there’s no one single Recipe that’s universally loved by everyone (although a few seem close). Still, give these seven a try—keep the ones you like, and replace the ones that you don’t.

*Arched Window* – Ogden, UT – Fujifilm X-Pro1 – Kodachrome I

A couple of important side notes here. First, this list isn’t necessarily made up of versatile Recipes. Like film, most Film Simulation Recipes have specific use cases—such as sunny daylight—so not all of these option will be good for night photography, for example, or perhaps other situations. Also, X-Trans I models cannot save a White Balance Shift within the C1-C7 Custom Presets. You can only save one WB Shift per White Balance type, which means you’ll have to remember to adjust the WB Shift each time you change Recipes. Since X-Trans I was excluded from the Which Film Simulation Recipe, When? series, I decided to take WB Shift into account for this article, and choose Recipes with a variety of WB types. This will make the user experience more enjoyable, but it does exclude some Recipes that might be preferable over others, since I’m avoiding multiple Recipes with the same WB type. For the 7th Recipe, use Daylight/Fine instead of Auto; by doing so, you’ll still get a similar result, and, since the two Daylight WB Recipes share the same WB Shift, you’ll be good to go.

The Essential 7 Film Simulation Recipes to program into your X-Trans I camera first:

C1 — Kodachrome II — Auto WB

Kodachrome II

C2 — Punchy Velvia — Daylight/Fine WB

Punchy Velvia

C3 — Color Negative Film — Kelvin WB

Color Negative Film

C4 — Superia Xtra 400 — Shade WB

Superia Xtra 400

C5 — Vivid Color — Fluorescent 1 WB

Vivid Color

C6 — Provia — Incandescent WB

Provia

C7 — Sepia — *Use Daylight/Fine WB (instead of Auto)*

Sepia

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

The Essential 7 Film Simulation Recipes to Program Into Your Fujifilm Camera First — Part 5: X-Trans II

Posted on January 3, 2024 by Ritchie Roesch

*Purple Mountains* – Buckeye, AZ – Fujifilm X-T1 – Classic Kodak Chrome

Part 1 — X-Trans V, Part 2 — X-Trans IV, Part 3 — X-T3/X-T30, Part 4 — X-Trans III, Part 6 — X-Trans I

The list of Film Simulation Recipes below are my “Essential 7” for X-Trans II cameras, which are the X100S, X100T, X-T1, X-T10, X-E2, X-E2s, X70, X20, X30, XQ1, and XQ2. A few of the older models—X100S, X20, and XQ1—don’t have Classic Chrome, so I have a set of Recipes at the bottom that exclude the Classic Chrome film simulation. To complicate it more, I don’t believe that either of the XQ models have PRO Neg. Hi or PRO Neg. Std (but they also don’t have C1-C7). If you are not sure which Recipes to program into your C1-C7 Custom Presets, these are my suggestions for you to begin with. These are the ones that you must try, in my opinion. You might love all of them, you might only appreciate some of them, or you might not like any of them. Each person has their own styles and tastes, and there’s no one single Recipe that’s universally loved by everyone (although a few seem close). Still, give these seven a try—keep the ones you like, and replace the ones that you don’t.

*Indoor Tree* – Buckeye, AZ – Fujifilm X-T1 – Provia Negative

A couple of important side notes here. First, this list isn’t necessarily made up of versatile Recipes. Like film, most Film Simulation Recipes have specific use cases—such as sunny daylight—so not all of these option will be good for night photography, for example, or perhaps other situations. Be sure to visit my Which Film Simulation Recipe, When? article for a more comprehensive group of options for various use cases. Also, X-Trans II models cannot save a White Balance Shift within the C1-C7 Custom Presets. You can only save one WB Shift per White Balance type, which means you’ll have to remember to adjust the WB Shift each time you change Recipes. The suggestions below do not take this into account; however, the Which Film Simulation Recipe, When? article does, so be sure to read it.

The Essential 7 Film Simulation Recipes to program into your X-Trans II camera first:

C1 — Classic Kodak Chrome

Classic Kodak Chrome

C2 — Kodachrome II

Kodachrome II

C3 — Kodak Portra 160

Kodak Portra 160

C5 — Ektachrome 100SW

Ektachrome 100SW

C5 — Pro Film

Pro Film

C6 — CineStill 800T

CineStill 800T

C7 — Monochrome Red

Monochrome Red

The Essential 7 Film Simulation Recipes to program into your X-Trans II camera first (without Classic Chrome):

C1 — Porto 200

Porto 200

C2 — Color Negative Film

C3 — Astia

C4 — Eterna

C5 — Pro Film

C6 — CineStill 800T

CineStill 800T

C7 — Monochrome Red

Monochrome Red

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

The Essential 7 Film Simulation Recipes to Program Into Your Fujifilm Camera First — Part 4: X-Trans III

Posted on January 2, 2024 by Ritchie Roesch

*Last Warm Light on Wasatch Front* – Farmington, UT – Fujifilm X-H1 – Negative Print

Part 1 — X-Trans V, Part 2 — X-Trans IV, Part 3 — X-T3/X-T30, Part 5 — X-Trans II, Part 6 — X-Trans I

The list of Film Simulation Recipes below are my “Essential 7” for X-Trans III cameras, which are the X-Pro2, X100F, X-T2, X-T20, X-E3, and X-H1. If you are not sure which Recipes to program into your C1-C7 Custom Presets, these are my suggestions for you to begin with. These are the ones that you must try, in my opinion. You might love all of them, you might only appreciate some of them, or you might not like any of them. Each person has their own styles and tastes, and there’s no one single Recipe that’s universally loved by everyone (although a few seem close). Still, give these seven a try—keep the ones you like, and replace the ones that you don’t.

*Follow the Bird to Salt Lake* – Salt Lake City, UT – Fujifilm X-H1 – Cross Process

A couple of important side notes here. First, this list isn’t necessarily made up of versatile Recipes. Like film, most Film Simulation Recipes have specific use cases—such as sunny daylight—so not all of these option will be good for night photography, for example, or perhaps other situations. Be sure to visit my Which Film Simulation Recipe, When? article for a more comprehensive group of options for various use cases. Also, X-Trans III models cannot save a White Balance Shift within the C1-C7 Custom Presets. You can only save one WB Shift per White Balance type, which means you’ll have to remember to adjust the WB Shift each time you change Recipes. The suggestions below do not take this into account; however, the Which Film Simulation Recipe, When? article does, so be sure to read it.

The Essential 7 Film Simulation Recipes to program into your X-Trans III camera first:

C1 — Kodachrome II

Kodachrome II

C2 — Vintage Kodachrome

Vintage Kodachrome

C3 — Classic Chrome

Classic Chrome

C4 — Fujicolor Superia 800

Fujicolor Superia 800

C5 — Everyday Astia

Everyday Astia

C6 — CineStill 800T

CineStill 800T

C7 — Agfa Scala

Agfa Scala

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

Creative Collective 062: FXW Zine — Issue 26 — January 2024

Posted on January 1, 2024 by Ritchie Roesch

Happy New Year!

The January issue of FXW Zine is out now! Creative Collective subscribers can download it today. Not a Creative Collective subscriber? Join to gain access to this issue plus all pervious issues of FXW Zine and the many bonus articles.

In Issue 26, I discuss 24 Film Simulation Recipes that I anticipate using often in 2024. There are 77 pictures (including the cover) over 54 pages. Enjoy!

The Essential 7 Film Simulation Recipes to Program Into Your Fujifilm Camera First — Part 3: X-T3 & X-T30

Posted on December 30, 2023 by Ritchie Roesch

*Vintage Sunset* – Ogden, UT – Fujifilm X-T30 – Kodacolor

Part 1 — X-Trans V, Part 2 — X-Trans IV, Part 4 — X-Trans III, Part 5 — X-Trans II, Part 6 — X-Trans I

The list of Film Simulation Recipes below are my “Essential 7” for the X-T3 and X-T30. Fujifilm left these two models on an island (didn’t give them the same JPEG options as the other X-Trans IV models), so that’s why they get their own article. If you are not sure which Recipes to program into your C1-C7 Custom Presets, these are my suggestions for you to begin with. These are the ones that you must try, in my opinion. You might love all of them, you might only appreciate some of them, or you might not like any of them. Each person has their own styles and tastes, and there’s no one single Recipe that’s universally loved by everyone (although a few seem close). Still, give these seven a try—keep the ones you like, and replace the ones that you don’t.

*Evening at Monument Valley* – Monument Valley, AZ – Fujifilm X-T30 – Velvia

A couple of important side notes here. First, this list isn’t necessarily made up of versatile Recipes. Like film, most Film Simulation Recipes have specific use cases—such as sunny daylight—so not all of these option will be good for night photography, for example, or perhaps other situations. Be sure to visit my Which Film Simulation Recipe, When? article for a more comprehensive group of options for various use cases. Also, the X-T3 and X-T30 cannot save a White Balance Shift within the C1-C7 Custom Presets. You can only save one WB Shift per White Balance type, which means you’ll have to remember to adjust the WB Shift each time you change Recipes. The suggestions below do not take this into account; however, the Which Film Simulation Recipe, When? article does, so be sure to read it.

The Essential 7 Film Simulation Recipes to program into your X-T3 or X-T30 camera first:

C1 — Kodachrome 64

Kodachrome 64

C2 — Kodak Portra 400 v2

Kodak Portra 400 v2

C3 — Kodak Gold 200

Kodak Gold 200

C4 — Kodacolor

Kodacolor

C5 — Fujicolor 100 Industrial

Fujicolor 100 Industrial

C6 — Velvia v2

Velvia v2

C7 — Dramatic Monochrome

Dramatic Monochrome

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

The Essential 7 Film Simulation Recipes to Program Into Your Fujifilm Camera First — Part 2: X-Trans IV

Posted on December 28, 2023 by Ritchie Roesch

*Spooner Cove* – Montaña de Oro SP, CA – Fujifilm X100V – Fujicolor 100 Gold

Part 1 — X-Trans V, Part 3 — X-T3 & X-T30, Part 4 — X-Trans III, Part 5 — X-Trans II, Part 6 — X-Trans I

The list of Film Simulation Recipes below are my “Essential 7” for X-Trans IV cameras (except for the X-T3 and X-T30, which will be found in Part 3). If you are not sure which Recipes to program into your C1-C7 Custom Presets, these are my suggestions for you to begin with. These are the ones that you must try, in my opinion. You might love all of them, you might only appreciate some of them, or you might not like any of them. Each person has their own styles and tastes, and there’s no one single Recipe that’s universally loved by everyone (although a few seem close). Still, give these seven a try—keep the ones you like, and replace the ones that you don’t.

*Airstream* – Pismo Beach, CA – Fujifilm X-E4 – Chrome Slide

An important side note here: this list isn’t necessarily made up of versatile Recipes. Like film, most Film Simulation Recipes have specific use cases—such as sunny daylight—so not all of these option will be good for night photography, for example, or perhaps other situations. Be sure to visit my Which Film Simulation Recipe, When? article (this one, too) for a more comprehensive group of options for various use cases.

This list is for X-Trans IV cameras (except for the X-T3 & X-T30), which include the Fujifilm X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II. The X-S20’s exclusion is a bit controversial because it has an X-Trans IV sensor paired with the X-Trans V processor, but since it seems to render more similar to X-Trans V than X-Trans IV, and has the X-Trans V JPEG options, it’s not in this list, but with the X-Trans V cameras.

The Essential 7 Film Simulation Recipes to program into your X-Trans IV camera first:

C1 — Kodachrome 64

Kodachrome 64

C2 — Kodak Portra 400 v2

Kodak Portra 400 v2

C3 — Reggie’s Portra

Reggie’s Portra

C4 — Vibrant Arizona

Vibrant Arizona

C5 — Pacific Blues

Pacific Blues

C6 — Fujicolor Superia 100

Fujicolor Superia 100

C7 — Kodak Tri-X 400

Kodak Tri-X 400

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

The Essential 7 Film Simulation Recipes to Program Into Your Fujifilm Camera First — Part 1: X-Trans V

Posted on December 26, 2023 by Ritchie Roesch

*Golden Aspen* – Flagstaff, AZ – Fujifilm X-T5 – Kodak Gold 200

Part 2 — X-Trans IV, Part 3 — X-T3 & X-T30, Part 4 — X-Trans III, Part 5 — X-Trans II, Part 6 — X-Trans I

This is Part 1 of what will be a series of articles on this topic. I actually attempted to do this back in the summer, but got sidetracked, and never made it beyond the first post. So those with an X-Trans V camera get a little bonus. My hope is to make it all the way through X-Trans I, so if you have an older model, don’t worry—we’ll get to your camera soon.

The list of Film Simulation Recipes below are my “Essential 7” for X-Trans V cameras. If you are not sure which Recipes to program into your C1-C7 Custom Presets, these are my suggestions for you to begin with. These are the ones that you must try, in my opinion. You might love all of them, you might only appreciate some of them, or you might not like any of them. Each person has their own styles and tastes, and there’s no one single Recipe that’s universally loved by everyone (although a few seem close). Still, give these seven a try—keep the ones you like, and replace the ones that you don’t.

*Left the Lights On* – Buckeye, AZ – Fujifilm X-T5 – Fluorescent Night

An important side note here: this list isn’t necessarily made up of versatile Recipes. Like film, most Film Simulation Recipes have specific use cases, such as sunny daylight, so not all of these option will be good for night photography, for example, or perhaps other situations. Be sure to visit my Which Film Simulation Recipe, When? for a more comprehensive list of options for various use cases.

This list is specifically for X-Trans V cameras, which (as of this writing) are the Fujifilm X-H2s, X-H2, X-T5, and X-S20. The X-S20 is a bit controversial to be included here because it has an X-Trans IV sensor paired with the X-Trans V processor, but since it seems to render more similar to X-Trans V than X-Trans IV, and has the X-Trans V JPEG options, it is included in this list. Also, use this list for the upcoming X100V successor, once it comes out (in February or March, most likely). Next up in this series is X-Trans IV.

The Essential 7 Film Simulation Recipes to program into your X-Trans V camera first:

C1 — Kodachrome 64

Kodachrome 64

C2 — Kodak Portra 400 v2

Kodak Portra 400 v2

C3 — Vibrant Arizona

Vibrant Arizona

C4 — Pacific Blues

Pacific Blues

C5 — 1970’s Summer

1970’s Summer

C6 — Reala Ace

Reala Ace

C7 — Kodak Tri-X 400

Kodak Tri-X 400

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

How to Create Film Simulation Recipes

Posted on December 21, 2023 by Ritchie Roesch

*Gift Giving* – Buckeye, AZ – Fujifilm X-T5 – Ilford FP4 Plus 125

Anders Lindborg has created or co-created a number of Film Simulation Recipes found on Fuji X Weekly, including my personal favorite: Kodak Tri-X 400. Some others are Kodak T-Max P3200, Kodak T-Max 400, Ilford FP4 Plus 125, Ilford HP5 Plus 400, Ilford Pan F Plus 50, Kodak Gold v2, seven Fujicolor Pro 160NS Recipes, and seven Fujicolor Pro 400H Recipes. He also made an important D-Range Priority discovery. Oh, and more are coming soon!

This morning I awoke to an email in my inbox from Anders. As a Christmas gift to you, he wanted to share his methods for creating Film Simulation Recipes that he has developed and put to use. This formula can be used by anyone. I have taken a similar approach a number of times myself (I do it in-camera, and not with X RAW Studio), although—for me—Recipes can come about many different ways; I don’t have one single method, but perhaps a handful of various approaches. I discussed it a bit in my Emulsion ’86 article.

*Pink Blossom Bush* – San Diego, CA – Fujifilm X-T5 – Emulsion ’86

Anders’ step-by-step formula is a path that you can follow to create your own Recipes that are certain to be accurate to any film aesthetic that you’d like to mimic. Oftentimes you can easily find the film spec sheets with a quick Google search, but for some emulsions you’ll have to dig deeper, or maybe you won’t find them at all. Many spec sheets for Kodak films are readily available, for example, but you may have trouble finding them for other brands or long-discontinued emulsions. If you can locate the spec sheet, then you can begin Step 1. If you don’t have or use X RAW Studio, you can do this in-camera, but it is probably a little easier to do with X RAW Studio; either way, it does require shooting RAW+JPEG so that you can reprocess the RAW file.

Thank you, Anders Lindborg, for sharing this with everyone! Even if you have no interest in creating a Film Simulation Recipe yourself, perhaps this gives you an idea of the incredible effort that sometimes goes into creating one.

*Round Window* – Pismo Beach, CA – Fujifilm X100V – Kodak Tri-X 400

Anders’ Film Simulation Development Method

Download all reference material you need, including film spec sheets. This is really important to have, if you want to create a realistic simulation. You will need a good chart of color wavelength in nanometers as well, to be able to use this method.
Load some reference photos into X Raw Studio. Select a good one that is taken at noon, as this used to be the official reference for film daylight temperature.
Note: The time when the photo is taken is important. Don’t cheat!
Select the base Film Simulation you think is most similar to the film you actually want to simulate. Sometimes, the general characteristics are more important than the color scheme being spot on.
Choose the Dynamic Range you think is most correct for your simulation. The characteristic curves chart from the spec sheets can be a lot of help here.
Set the White Balance (in kelvin) to a value that corresponds to the color of the film base layer. This will most likely make your colors look really off, but don’t worry about that right now.
Note: It helps knowing where the film was created, as the daylight temperature varies quite a bit depending on where in the world you are located.
Check the spec sheets and find out what colors of the second and third (with Fuji, sometimes a fourth) layers are. Look at the spectral sensitivity chart to find how the colors are distributed and which color is most prominent. Locate the highest peak of the dominant color and check the specified wavelength of the peak.
Look in the color wavelength chart and find the color that corresponds to the wavelength reading from the previous step. Now go back to X Raw Studio and open the WB Shift panel and locate the exact color you found. This takes some practice, but after doing it a few times it’s quite easy.
Now look at the colors of your photo and check the color distribution compared to the spectral sensitivity chart. Make any adjustments needed to balance out the color distribution.
Look in the spec sheets again and locate the spectral dye density curves chart. This chart describes the tonality of the film. Adjust Highlight, Shadow, and Clarity as needed.
Any other parameters needed should be set at this step. These include Grain, Sharpness, Color Chrome Effects, Noise Reduction, etc.. Note that changing a single parameter can have a huge impact, so be careful here!
Look at your photo again. Do the colors look like they should? If not, make more adjustments to either your selected White Balance or WB Shift. Only minor adjustments should be needed at this step.
Save your current recipe and apply it to your other reference photos in X Raw Studio. Compare them to photos found on Flickr and film review sites. Keep in mind that many of them are developed and scanned at home, so you need to learn how different development and scanning methods affect the final result! Adjust the recipe as needed and keep reapplying it to your reference photos and double check them over and over again.
If you think you might be done, it’s time to test it for real! Load the recipe into your camera and get out there. Try taking photos that mimics what you’ve found on the Internet so they are somewhat comparable. It’s all about details here, so keep iterating from Step 8 until you are happy. With hard work and a bit of luck, you’ll have a spot on clone of the original film!

“Don’t forget to share your creation with the world,” Anders Lindborg wrote, “and feel happy about contributing to the community! Just keep in mind that this is more of learning how to best mimic the original film, rather than creating an exact copy. There are so many variables that can affect the final result of real film and the most important part here is that the general behavior is the same. This method is proven to work for both color and black & white simulations and is all based on color science. Several successful simulations have been created while developing the method, so this is several years of blood, sweat and tears that have been compressed into these steps. While this method might look very advanced, trust me when I say that it works and that it’s worth the effort! Not only the general look of the film will be simulated, but also its behavior in different situations, including weird color shifts and other general quirks. The results have amazed me several times!”

Film Simulation Recipes for Double Exposure Photography

Posted on December 9, 2023 by Ritchie Roesch

*Double Exposure captured with the Mystery Chrome Recipe*

In the Season 3 finale of SOOC Live, Fuji X-Photographer Nathalie Boucry and I discussed double exposure photography at length, and especially how to do it in-camera on Fujifilm models. If you are interested in the topic and didn’t catch that episode when it was live, you may want to take some time and watch it now. I’ve included it below. If you are short on time, skip ahead to the 35 minute mark, and begin around there.

I’m not going to rehash all that was said during the show (you’ve got to watch it)—this is a lengthy and complicated topic that can go many different directions. Really, books can be (and have been) written about it. Instead, I want to talk about Film Simulation Recipes for double exposures, and also provide a little more explanation for some things that maybe weren’t clear in the broadcast. I hope it all makes sense by the end.

The three Film Simulation Recipes that we discussed in the show and are challenging you to shoot with for the remainder of December plus most of January are Mystery Chrome, Dramatic Monochrome, and Faded Negative. Some notes about each:

Mystery Chrome is fully compatible with X-Trans III cameras, plus the X-T3 and X-T30. To use it on newer models, set Color Chrome FX Blue to Off, Clarity to 0, and choose a Grain size (Small or Large… I recommend Large). For those using newer cameras, we recommend using the Average setting for this Recipe, but don’t be afraid to try Additive.
Dramatic Monochrome is fully compatible with the Fujifilm X-T3 and X-T30. To use it on X-Trans III cameras, simply ignore Color Chrome Effect—the results will be nearly identical. To use it on newer cameras, set Color Chrome FX Blue to Off, Clarity to 0, and choose a Grain size (Small or Large… I recommend Large). For those using newer cameras, we recommend using the Additive setting for this Recipe, but don’t be afraid to try Average.
Faded Negative is fully compatible with X-Trans IV cameras, except for the X-T3 and X-T30. To use it on X-Trans V models, set Color Chrome FX Blue to Weak instead of Strong. This Recipe is not found in the Fuji X Weekly App because it requires further explanation on how to use it, and the App format is not conducive to that; however, in the broadcast Nathalie provides a great tip for how you can use the New Recipe (Blank Recipe Card) feature to add it to your App if you’d like. Be sure to read the article before attempting to use this Recipe.

The third Recipe—Faded Negative—requires a different technique than the first two. It’s definitely an outside-the-box approach to double exposure photography. There are other Recipes, which are also not in the App, that require double exposures, including Faded Color, Vintage Color Fade, Bleach Bypass, Faded Monochrome, Faded Monochrome for X-Trans II, and Split-Toned B&W. You can dive pretty far down this rabbit hole if you’d like. For further ideas, check out these articles: Making Color Pictures Using Acros, B&W Toning & Multiple Exposures, How To Add Texture To Your In-Camera JPEGs, The Treachery of Images, Creative Faded Exposures, Double Exposure Art — A Simple Method, and Easy Double Exposure Photography.

*In-camera double exposure on a Fujifilm X100F*

You can use any Film Simulation Recipe with double exposure photography, but in my experience the ones that work best are Recipes that are especially contrasty. For the purpose of the show, we’re using three specific ones; however, feel free to try any Recipe that interests you. The color pictures below were captured using the Ferrania Solaris FG 400 Recipe, and Kodak Tri-X 400 was used for the B&W. As for submitting images for the Viewers’ Images Slideshow, please only use the Mystery Chrome, Dramatic Monochrome, and Faded Negative Recipes.

One thing that perhaps should have been demonstrated in the show but wasn’t is what in-camera double exposures look like, taking a peek at each of the two exposures individually and then the combined image. Since the newer cameras can save a RAW file of each exposure (which can be processed into a JPEG in-camera), it’s possible to demonstrate this pretty easily.

I would say that double exposure photography takes a lot of practice to feel comfortable with, but there is a ton of potential for creativity. It’s worth trying, and it’s worth going through a lot of failures in order to get good at it. There are also so many different approaches and methods that can yield very different results. You’ll discover some of these as you practice. So my encouragement for you is to try and try again. If the pictures aren’t very good at first, don’t give up! Keep at it, and pretty soon you’ll surprise yourself with what you create.

One last thing: below I’ve included the Viewers’ Images Slideshow for the Reala Ace episode. If you haven’t yet seen it, be sure to watch it now. I want to express a very big “Thank you!” to everyone who submitted their photographs for inclusion in it. I always enjoy seeing your wonderful pictures!

Fluorescent Night — Fujifilm X-T5 (X-Trans V) Film Simulation Recipe

Posted on December 4, 2023 by Ritchie Roesch

*Left the Lights On* – Buckeye, AZ – Fujifilm X-T5 – Fluorescent Night Recipe

I wanted to create a Film Simulation Recipe for my Fujifilm X-T5 camera that would produce a certain look when shot under fluorescent lights at night. Now there are different varieties of fluorescent lightbulbs, and the kelvin temperature can vary quite significantly between them. It’s also not uncommon to find fluorescent lights mixed with other nearby light sources. In other words, results will very depending on the exact light situation. Sometimes this Recipe will produce warm results, and sometimes cool. While not modeled after any specific emulsion, this Recipe is similar to using a Tungsten-balanced film—perhaps something similar to Fujicolor NPL 160T or Kodak Portra 100T, although it’s not exactly like either of those. This Recipe gives you one more option for nighttime photography.

What I found myself enjoying more than I thought I would is using this Fluorescent Night Film Simulation Recipe during the day. It has an obvious cool cast with pronounced blues. Still, I was pleasantly surprised that this Recipe is halfway decent for daylight use. If you are looking for a retro film-like aesthetic that isn’t warm, Fluorescent Night might be a good option for your daylight photography.

*A Visit with Santa* – Buckeye, AZ – Fujifilm X-T5 – Fluorescent Night Recipe

This Fluorescent Night Film Simulation Recipe is compatible with all Fujifilm fifth-generation X-Trans cameras, which (as of this writing) are the X-H2s, X-H2, X-T5, and X-S20 (yes, the X-S20). You should also be able to use this on newer GFX models, but the results will likely be slightly different (try it anyway). For nighttime use, I most often selected -2/3 or -1/3 exposure compensation, and for daylight I most often used +1/3 or +2/3; however, “typical exposure compensation” is only meant as a starting point, and each exposure should be judged individually.

Film Simulation: Nostalgic Neg.
Dynamic Range: DR200
Grain Effect: Strong, Small
Color Chrome Effect: Strong
Color Chrome FX Blue: Weak
White Balance: Fluorescent 2, -8 Red & -1 Blue
Highlight: -1
Shadow: -1.5
Color: +4
Sharpness: -2
High ISO NR: -4
Clarity: -3
ISO: Auto, up to ISO 6400
Exposure Compensation: -2/3 to +2/3 (typically)

Example photographs, all camera-made JPEGs captured using this Fluorescent Night Film Simulation Recipe on my Fujifilm X-T5:

*Happy Girl* – Buckeye, AZ – Fujifilm X-T5

*Neighborhood Bougainvillea* – Buckeye, AZ – Fujifilm X-T5

*Bougainvillea Blue* – Buckeye, AZ – Fujifilm X-T5

*Bougainvillea Along Stucco Wall* – Buckeye, AZ – Fujifilm X-T5

*Sidewalk Potted Plant* – Buckeye, AZ – Fujifilm X-T5

*Potted Palm Tree* – Buckeye, AZ – Fujifilm X-T5

*Hairstyle Chair* – Buckeye, AZ – Fujifilm X-T5

*Christmas Tree & Letters to Santa* – Buckeye, AZ – Fujifilm X-T5

*Illuminated Door at Abandoned Building* – Buckeye, AZ – Fujifilm X-T5

*Broken Window* – Buckeye, AZ – Fujifilm X-T5

*Circle K Gas Station* – Surprise, AZ – Fujifilm X-T5

*Christmas Star* – Buckeye, AZ – Fujifilm X-T5

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X-T5 in black: Amazon B&H Moment
Fujifilm X-T5 in silver: Amazon B&H Moment

Find this Film Simulation Recipe and over 300 more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

Top 10 Fujicolor Film Simulation Recipes

Posted on December 2, 2023 by Ritchie Roesch

When I published my Top 25 Most Popular Film Simulation Recipes of 2023 (so far…), what was surprisingly absent were any that were modeled after or inspired by Fujifilm emulsions. The Top 25 were almost entirely Kodak-like Recipes. That shouldn’t be too surprising since Kodak was the most popular film manufacturer, so the desire for a Kodak rendering is to be expected. But, personally, I really appreciate many of the Fujicolor Recipes, and their complete exclusion from the Top 25 list was a bit unexpected.

Someone suggested that I should make a new list, this one showcasing the most popular Fujifilm-like Recipes. Just like the Top 25 list, this one is based on page-view website statistics. It’s a flawed method, but the best that I have available to me. I included the overall ranking, too, just so that you can see where they stand in the big picture.

The number one most popular Fujicolor Recipe is for X-Trans III cameras (plus the X-T3 and X-T30), as is number eight. The tenth spot is an X-Trans V Recipe. All the others are for X-Trans IV cameras. Eight of these use Classic Negative as the base, one uses PRO Neg. Std, and one uses Velvia. Some of these are personal favorite Recipes of mine, while some of my other personal favorite Recipes that are modeled after or inspired by Fujifilm emulsions didn’t make this list.

Without any further delay, here are the Top 10 Fujicolor Film Simulation Recipes:

#1 (#30 overall):

Fujicolor Superia 800

#2 (#41 overall):

Fujicolor Superia 800

#3 (#53 overall):

Fujicolor Natura 1600

#4 (#54 overall):

Fujicolor Superia 100

#5 (#57 overall):

#6 (#60 overall):

#7 (#61 overall):

#8 (#70 overall):

#9 (#72 overall):

#10 (#76 overall):

Find these Film Simulation Recipes and many more on the Fuji X Weekly App!

Why Film Simulation Recipes are BETTER than default Film Simulations

Posted on November 14, 2023 by Ritchie Roesch

*Autumn in a Mountain Meadow* – Flagstaff, AZ – Fujifilm X100V – Fujicolor Superia 100

I get asked sometimes a very fair question: why use Film Simulation Recipes when Fujifilm’s factory-default film simulations are just so darn good?

Fujifilm has, in my opinion, the best JPEG output of any brand. Their film simulations are significantly influenced by Fujifilm’s vast experience with analog film, and it should not surprise anyone that they look good without any modifications. However, Fujifilm does provide a number of tools to customize and fine-tune the straight-out-of-camera results, which I believe makes them even better.

For those who don’t know, Film Simulation Recipes are settings for Fujifilm cameras that produce certain aesthetics, often modeled after classic film emulsions. I have published over 300 of them, which you can find on this website and the Fuji X Weekly App. Recipes are intended to be shot as JPEGs (or RAW+JPEG, if you prefer), and produce out-of-camera pictures that don’t require any editing, or perhaps minimal post-processing if you like. They appear as though they were edited, or even film-like. This saves a lot of time, hassle, and possibly money. It opens up photography to those who don’t know how to RAW edit, or don’t have the desire to learn, or maybe don’t even have access to editing software. This also makes photography more enjoyable to folks (like me) who have RAW-edited for years but don’t care much for it, and would rather be doing other things (like capturing more pictures!).

*Golden Light in Abandoned House* – North Salt Lake, UT – Fujifilm X100V – Fujicolor Reala 100

Many photographers who own a Fujifilm camera never dive into the menu to adjust the JPEG parameters. They keep it on Provia/STD and at factory defaults, which is 0, Off, or Auto. Or maybe they try the other film simulations, but they still keep everything else set to the default settings. It’s completely understandable. The results are already good, and, besides, the options can seem overwhelming and confusing. Film Simulation Recipes, which takes the guesswork out of the various options, improve upon the standard film sims, but also provide some variety. If you only ever use the default options, you are limited to (for example) a maximum of 10 looks for color photography (11 if you have the latest GFX model with Reala Ace), but there are over 300 Film Simulation Recipes, so (depending on your camera model) you could have hundreds to choose from. You can find the Recipes that produce aesthetics that best match your style and taste.

This is in no way intended to put down factory-default film simulations, or those who use them. My intention is to simply compare a default film sim photograph with a Film Simulation Recipe. Maybe you like the non-Recipe picture better, and that’s ok if you do. There are so many other Recipes to choose from, and I bet at least one would produce a look that you like more than the default film sim—for example, there are 80 Recipes in the Fuji X Weekly App that use Classic Chrome, so if you don’t like the Recipe I chose for this article, there are 79 others that could possibly be a better match for you.

Some Film Simulation Recipes are drastically divergent from the default film simulations, and some are only subtly altered. Many are intended for certain light situations (sunny daylight or artificial light, for example), while Auto White Balance is the factory standard. There’s no one single “right” Recipe or even a perfect film simulation. What matters is finding what works best for you and your photography. That could be a collection of Film Simulation Recipes, it could be a default film sim, or it might be shooting RAW and editing with the software of your choice, or any combination thereof or something different entirely. There’s no right or wrong way. For me, it’s shooting straight-out-of-camera JPEGs using Film Simulation Recipes.

Below are examples of factory-default film simulations compared to Film Simulation Recipes.

Provia

Velvia

*Kodak Ektachrome E100VS v2 Film Simulation Recipe*

Astia

*CineStill 400D v2 Film Simulation Recipe*

Classic Chrome

*Kodak Ektar 100 Film Simulation Recipe*

PRO Neg. Hi

*Jeff Davenport Night Film Simulation Recipe*

PRO Neg. Std

*Nostalgic Print Film Simulation Recipe*

Classic Negative

*Superia Premium 400 Film Simulation Recipe*

Nostalgic Neg.

Eterna

*Kodak Vision3 250D Film Simulation Recipe*

Eterna Bleach Bypass

*Ferrania Solaris FG 400 Film Simulation Recipe*

Find these Film Simulation Recipes and about 300 more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

D-Range Priority: What it is + How, When & Why to use it

Posted on November 13, 2023 by Ritchie Roesch

*Yellow Aspen Forest* – Flagstaff, AZ – Fujifilm X-T5 – Kodak Portra 160 v2 – DR-P Auto

Fujifilm introduced a feature called D-Range Priority (abbreviated DR-P) on the Fujifilm X-T3 in late-2018. Except that’s not entirely true, as the history of DR-P goes back much further than that. You see, Fujifilm EXR cameras, which were before X-Trans and utilized pixel-binning, also had something called D-Range Priority. Oh, and on their Frontier scanners, Fujifilm had something nearly identical to DR-P called Hypertone. The origins of DR-P seem to be found somewhere in the 1990’s.

My first camera that had D-Range Priority—a Fujifilm X-T30—arrived at my doorstep in early-2019, but I haven’t utilized the feature all that much, only sparingly. I get questions about it fairly regularly, particularly after I publish a Film Simulation Recipe that uses it, so I thought I’d take a moment and explain what DR-P is, plus how, when, and why to use it.

Let’s go back to Fujifilm’s Frontier scanners, which were common in photo labs in the 1990’s and 2000’s. Fujifilm modeled their film simulations—at least in part—after scans of films with corrections applied. Those scans were likely from Frontier scanners, and one of the corrections that Fujifilm recommended was Hypertone set to Auto. One limitation of digital camera sensors compared to color negative film is dynamic range. Negative film often has a larger dynamic range than digital cameras (especially in the early days of digital). Film tends to be more forgiving to overexposure (highlights), where digital tends to be more forgiving to underexposure (shadows). Hypertone was a software trick to maximize dynamic range so that it would digitally render more similarly to printed film on Fujicolor paper. D-Range Priority is a trick to achieve a dynamic range more similar to Frontier film scans that had Hypertone enabled.

*Arizona Barn* – Sedona, Arizona – Fujifilm X-T5 – Vibrant Arizona – DR-P Strong

Which answers the question of why to use it. D-Range Priority maximizes dynamic range, so as to keep highlights and shadows in check, but especially highlights. It’s more difficult to blow out highlights when you use DR-P. If you want to have the greatest dynamic range so as to avoid clipped highlights and blocked-up shadows, this is your best tool.

A few notes. First, like the regular Dynamic Range options (you know, DR100, DR200, DR400, and DR-Auto), D-Range Priority is ISO dependent. In this regard, DR-P Weak is like using DR200, and DR-P Strong is like using DR400. D-Range Priority is used in lieu of the Dynamic Range settings, so you cannot choose (for example) both DR200 and DR-P Weak simultaneously, only one or the other. Also, D-Range Priority disables the Tone Curve, so you cannot select a Highlight and Shadow setting. When enabled, DR-P is the Tone Curve. Interestingly, DR400 with both Highlight and Shadow set to -2 produces similar results to DR-P Weak. DR-P Auto chooses DR-P Weak almost always, and only selects DR-P Strong when there is a very bright light source, like shooting directly at the sun. D-Range Priority Strong produces a very low-contrast image, while DR-P Weak is a little less flat, but is still low-contrast.

To choose D-Range Priority, within the IQ section of the camera’s main Menu find D-Range Priority and select Auto, Strong, or Weak. Normally, D-Range Priority is set to Off. You only enable it when you want to use it. You can also choose D-Range Priority within Edit/Save Custom Presets, and have it enabled on any of your C1-C7 (or C1-C4, depending on your model) options.

*Dry Fountain Evening* – Buckeye, AZ – Fujifilm X-E4 – Expired Kodak Vision2 250D – DR-P Auto

There aren’t very many Recipes that utilize D-Range Priority, but there are some, included a couple that are popular right now. Vibrant Arizona uses DR-P Strong, as does Pulled Fujicolor Superia. Kodak Portra 160 v2 uses DR-P Auto, as do Expired Kodak Vision2 250D, Portra-Style, and Scanned Superia. There aren’t any that expressly use DR-P Weak, although you could enable DR-P Weak for the following Recipes and it will still render similarly: Fujicolor NPS 160 Pulled, Reala Ace, Bright Summer, Bright Kodak, and Indoor Angouleme.

To answer the when to use D-Range Priority question, it’s important to remember what DR-P does: produce a low-contrast picture that maximizes dynamic range to protect shadows and especially highlights. If you want punchy pictures, DR-P is not what you want to use (although in high contrast situations, you might still get dramatic results). If you want light pictures that might more closely resemble film scans (particularly from Frontier scanners), then DR-P is an option that you’ll want to consider.

While D-Range Priority is a fairly recent addition to X-Trans cameras—first introduced on X-Trans IV models—it turns out to have a much longer history. For years I assumed that D-Range Priority was for emergency use in extreme situations only, so I pretty much ignored it. I have since warmed up to DR-P, and I use it much more often than I used to. I still feel it’s probably not an option to utilize all of the time, but in the right situations or for a certain look, it works really well.

Kodak Portra 160 v2 — Fujifilm X-T5 (X-Trans V) Film Simulation Recipe

Posted on November 10, 2023 by Ritchie Roesch

*Yellow Aspen Forest* – Flagstaff, AZ – Fujifilm X-T5 – Kodak Portra 160 v2 Recipe

At the very moment that I was finishing up my Kodak Portra 160 Film Simulation Recipe for X-Trans IV cameras, Thomas Schwab, who has created or co-created a number of Recipes on this website, sent me a modification that he made of the “old” Kodak Portra 160 Recipe (for X-Trans III plus the X-T3 & X-T30 cameras) to make it compatible with X-Trans V models. Clear as mud? Let me retry. This new Kodak Portra 160 v2 Recipe was modified by Thomas from the Kodak Portra 160 Recipe published in 2020 so as to be compatible with X-Trans V cameras. Plus he gave it a tune-up. Excitedly, I programmed this new version into my Fujifilm X-T5; however, I had several other projects going on, so it took a little time to get this one out. Thomas Schwab did a great job of updating the old version, and the results speak for themselves. I want to give Thomas a special “thank you” for his work and willingness to share!

Kodak introduced the Portra line in 1998, with two ISO 160 versions, two ISO 400 versions, and an ISO 800 emulsion (plus a short-lived ISO 100 Tungsten film, for those keeping score). Portra saw a couple of updates by Kodak, and in late-2010 the two ISO 160 versions were merged into one, as well as the two ISO 400 versions. Originally, Kodak Portra 160 came in “NC” (neutral color) and “VC” (vivid color) versions; Portra 160 NC was more popular for portraits and Portra 160 VC was more popular for landscapes. When Kodak merged the two, it fell kind of in-between the two emulsions—more vibrant than NC but less than VC. This Film Simulation Recipe is more similar to the merged Portra 160 that Kodak introduced in 2010. The film has become iconic, with its warm yet natural colors. As the name implies, it was meant for portrait photography, but is popular for many genres.

*Shell Gas Station* – Phoenix, AZ – Fujifilm X-T5 – Kodak Portra 160 v2 Recipe

This Kodak Portra 160 v2 Film Simulation Recipe is compatible with fifth-generation X-Trans cameras, which (as of this writing) are the X-H2, X-H2s, X-T5, and X-S20 (yes, the X-S20). With one modification—setting Color Chrome FX Blue to Strong instead of Weak—this Recipe is also compatible with most fourth-generation X-Trans cameras: X-Pro3, X100V, X-T4, X-S10, X-E4 & X-T30 II. This can also be used on newer GFX models, but it will render slightly different (try it anyway).

Film Simulation: Classic Chrome
Grain Effect: Weak, Small
Color Chrome Effect: Weak
Color Chrome FX Blue: Weak
White Balance: Daylight, +4 Red & -5 Blue
Dynamic Range: D-Range Priority (DR-P) Auto
Color: 0
Sharpness: -1
High ISO NR: -4
Clarity: -2
ISO: Auto, up to ISO 6400
Exposure Compensation: +1/3 to +1 (typically)

Example photographs, all camera-made JPEGs using this Kodak Portra 160 v2 Film Simulation Recipe on my Fujifilm X-T5:

*Smokey Sunset* – Flagstaff, AZ – Fujifilm X-T5

*Mountainous Contemplations* – Flagstaff, AZ – Fujifilm X-T5

*Siblings* – Flagstaff, AZ – Fujifilm X-T5

*Backlit Boy in Autumn* – Flagstaff, AZ – Fujifilm X-T5

*Jonathan Using RitchieCam* – Flagstaff, AZ – Fujifilm X-T5

*Golden Hour, Golden Trees* – Flagstaff, AZ – Fujifilm X-T5

*Deer in the Meadow* – Flagstaff, AZ – Fujifilm X-T5

*Yellow Aspen Tree Tops* – Flagstaff, AZ – Fujifilm X-T5

*Yellow Aspens behind Green Pine* – Flagstaff, AZ – Fujifilm X-T5

*Leaves & Needles* – Flagstaff, AZ – Fujifilm X-T5

*Autumn Joy* – Flagstaff, AZ – Fujifilm X-T5

*Bougainvillea Pink* – Buckeye, AZ – Fujifilm X-T5

*Endless Blue & Palms* – Buckeye, AZ – Fujifilm X-T5

*Dusk in the Suburbs* – Buckeye, AZ – Fujifilm X-T5

*Frisbee Golf* – Buckeye, AZ – Fujifilm X-T5

*Yard Palm* – Buckeye, AZ – Fujifilm X-T5

*Palm Behind Bougainvillea* – Buckeye, AZ – Fujifilm X-T5

*Two-Trunked Saguaro* – Buckeye, AZ – Fujifilm X-T5

This post contains affiliate links, and if you make a purchase using my links I’ll be compensated a small amount for it.

Fujifilm X-T5 in black: Amazon B&H Moment
Fujifilm X-T5 in silver: Amazon B&H Moment

Find this Film Simulation Recipe and over 300 more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

Help Support Fuji X Weekly!

Nobody pays me to write the content found on the Fuji X Weekly blog. There’s a real cost to running this website. I also put a lot of my own time into writing the posts. If you’ve found something on Fuji X Weekly helpful to you and you’d like to give back, this is a good place to do it. You can donate to this blog using PayPal by clicking below. I appreciate it! Thank you for your support! Please do not feel obligated to give, but do so only if you want to.

$5.00

Top 25 Most Popular Film Simulation Recipes of 2023 (so far…)

Posted on November 8, 2023 by Ritchie Roesch

*No Cigarettes* – Avila Beach, CA – Fujifilm X-E4 – Kodachrome 64 Recipe

I get asked fairly regularly which Film Simulation Recipes are the most popular. For me, this is a fascinating topic, but it’s definitely hard to know definitively. While I get a glimpse on social media, my best gauge is the Fuji X Weekly website statistics; specifically, which Recipe articles are viewed the most. I don’t collect any data on the Fuji X Weekly App, so that’s no help—although, if I did, it would likely offer the most accurate picture; however, it would still be impossible to know which Recipes people programmed into their Fujifilm cameras, or how often they use each. Perhaps a survey would be particularly useful, yet even it has its limitations. While certainly a flawed method, page-view website statics offer the best glimpse at which Film Simulation Recipes are the most popular, so that’s what I’m using for this article. These are simply the Top 25 most-viewed Recipes on the Fuji X Weekly website.

There’s a lot that can be gleaned from this exercise, but also a grain of salt must be consumed, too. For example, Vibrant Arizona actually has four Recipes in that article (two versions of two), so it would certainly rank lower if it only had one; also, it was published near the end of April, so it has a time disadvantage, as do all of the other Recipes published after January 1st. But, setting those limitations aside, there are still some fascinating trends to be explored. Some of these rankings are quite surprising to me, and others are not surprising at all.

Classic Chrome is the king of film simulations. The five most popular Fuji X Weekly Recipes all use Classic Chrome, as do 21 of the Top 25. Second place, which is Classic Negative with two, is a very distant second. Acros and PRO Neg. Std have one each. The other film simulations don’t even chart on this list. For those who use Film Simulation Recipes, Classic Chrome is clearly the film sim of choice for most.

Not surprisingly, Recipes with Kodak brand names are the most popular. 13 have Kodak in the name, eight have Portra in the name, and five have Kodachrome in the name. Kodak was the most popular film brand, so it should be expected that Film Simulation Recipes that mimic those emulsions would also be popular. What is surprising to me is that none with Fujifilm, Fujicolor, Superia, Provia, Velvia, etc., in the Recipe name made this list, as some of those are my personal favorites.

*Two Caballeros* – Culleoka, TX – Fujifilm X-E4 – Kodachrome 64 Recipe

10 of these Recipes use a Kelvin White Balance, eight use Auto White Balance, six use Daylight, and one uses a Custom White Balance measurement. Almost all of them are warm, at least a little. Only one B&W Recipe made this list, which isn’t a shock to me because the color Recipes are typically far more popular than monochrome. Only one Recipe specifically intended for night photography made this list, and I’m actually a little surprised by which one and how high it ranks. 10 Recipes use DR200, nine use DR400, five use DR-Auto, and one uses D-Range Priority Strong.

Most people who use Recipes do so on X-Trans IV cameras, specifically the X-Pro3, X100V, X-T4, X-S10, X-E4, and X-T30 II models. Of the Top 25 Recipes, 16 of them are for those specific X-Trans IV cameras, including each of the Top 3. Six are for X-Trans III cameras plus the X-T3 and X-T30, two are for X-Trans V, and one is for X-Trans II (the very last one). But it’s a little more convoluted than that, because some Recipes (Vibrant Arizona and Kodak Tri-X 400 for sure, and probably others) are being used on X-Trans V cameras. Some of the X-Trans III plus X-T3 and X-T30 Recipes are likely being used on X-Trans IV and X-Trans V models to some extent. The majority of X-Trans V Recipes are at a disadvantage because they were published after January 1st, and there are only four fifth-generation X-Trans models anyway. I think the biggest takeaway is that the majority of people who shoot with Film Simulation Recipes in 2023 are doing so on X-Trans III and newer cameras, and X-Trans IV is the largest group within that. Recipes are not as popular on EXR, X-Trans I, X-Trans II, Bayer, and GFX models, although there are certainly many who do use them.

There are some rankings that surprise me. Vibrant Arizona is the only one published in 2023 to make the Top 25, although the fact that there are actually four Recipes in that article certainly affect its page-views. The X-Trans III version of Kodak Portra 400 requires a hard-to-get-right custom White Balance measurement, so it’s always surprising to me that so many use it. Kodak Portra 400 Warm and Bright Summer are especially warm, and their use case is more narrow than the others. If you had asked me what the second-most popular Recipe that uses the Classic Negative film sim, I would not have guessed Kodak Max 800, yet here it is! The X-Trans III version of Kodachrome II was ranked #7 last year, the X-Trans IV version of Kodachome II was ranked #8, Nostalgic Negative was #9, and Kodak Ektar 100 was #10, so those have fallen significantly, now ranked #12, #19, #24, & #16, respectively. I’m a little surprised that Classic Kodak Chrome is the most popular X-Trans II Recipe.

Anyway, I’ve held you up long enough. Let’s get to the list!

Top 25 Most Popular Film Simulation Recipes of 2023 (…so far)

#1:

#2:

#3:

#4:

#5:

#6:

#7:

#8:

#9:

#10:

#11:

#12:

#13:

#14:

#15:

Kodak Portra 400 Warm

#16:

#17:

#18:

#19:

#20:

#21:

#22:

#23:

#24:

#25:

Find these Film Simulation Recipes and many more on the Fuji X Weekly App!

Helping You Decide Which Film Simulation Recipes to Choose

Posted on November 6, 2023 by Ritchie Roesch

*Golden Autumn Trees* – Flagstaff, AZ – Fujifilm X100V – Kodak Ektar 100 Recipe

There are over 300 Film Simulation Recipes on this website and the Fuji X Weekly App. Having so many options to choose from is great, because no matter your style there’s bound to be at least one that you love, and different Recipes are sometimes best in specific situations. The only problem with having all these options is that sometimes it’s hard to know which ones to choose. There can be a paralysis of choice, or, at the very least, it can seem overwhelming.

But not to worry, I’m here to help! Over the last year I’ve been publishing articles to help with this specific problem—to be a guide of sorts through the many Recipes. There’s no comprehensive list (nor should there be, I think) of when to use each option, because whether or not a particular Recipe is great for a specific scenario is subjective. I might like one, but you might dislike it. However, I can provide some direction—something that I have been attempting to do over the last 12 months.

The problem with my method, though, is that it’s easy for my articles on this subject to get lost in the shuffle. So I thought it would be helpful to round them up, and put them into one place. That’s the intention of this article.

First up is my Which Film Simulation Recipe, When? series. If you only open one article, that’s the one to choose. I think it’s probably the most helpful out of all of them in this post. You might appreciate many of the others, too, so I would encourage you to click on more than one article to read, especially if the number of Film Simulation Recipes feels overwhelming to you, or you’re just not sure where to begin. I hope this helps with that, and you’ll have a little more confidence choosing some to program into your camera.

*Evening Charge* – Santa Rosa, NM – Fujifilm X-E4 – Kodak Portra 400 v2 Recipe

Which Film Simulation Recipe, When?
Part 1 (X-Trans IV)
Part 2 (X-T3 & X-T30)
Part 3 (X-Trans III)
Part 4 (X-Trans II)
Part 5 (X-Trans V)
Summer Edition (X-Trans IV)

*Working* – Salt Lake City, UT – Fujifilm X-E4 – Kodak Vision3 250D Recipe

Elevating Your Street Photography with Fujifilm Film Simulation Recipes + 5 Recipes to Try Today!

*More Than Double Wide* – Arlington, AZ – Fujifilm X-T5 – 1970’s Summer Recipe

Using Film Simulation Recipes to Recreate Vintage Looks — 10 Recipes to Try Today!

*Motel* – Panguitch, UT – Fujifilm X100V – Kodak Tri-X 400 Recipe

Five Film Simulation Recipes Every Social Media Influencer Should Try on Their Fujifilm X100V

*Abandoned & Trashed* – North Salt Lake, UT – Fujifilm X100V – Fujicolor Reala 100 Recipe

Try These 5 Fujifilm Film Simulation Recipes Today for a Color Negative Film Look

*Ghosts of the Past* – Ogden, UT – Fujifilm XF10 – Classic Chrome Recipe

Try These 3 Film Simulation Recipes, No Matter Your Fujifilm Camera (almost, anyway) + When To Use Them!

*Spiderwebs* – Buckeye, AZ – Fujifilm X-T5 – Pacific Blues Recipe

5 Film Simulation Recipes every Fujifilm X-T5 Photographer Should Try

*Sentinel & Merced* – Yosemite NP, CA – Fujifilm X100V – Vintage Color Recipe

The 10 Best Film Simulation Recipes on the Fuji X Weekly App

*Garden Spiderweb* – Buckeye, AZ – Fujifilm X-E4 – GAF 500 Recipe

7 Film Simulation Recipes for Ultra-High-ISO Photography

*Evening Hoop* – Farmington, UT – Fujifilm X-E4 – Muted Color Recipe

7 Fujifilm Film Simulation Recipes for Photographing Basketball Hoops

*Backlit Lupine* – Sun City, AZ – Fujifilm X-T5 – Thommy’s Ektachrome Recipe

Fujifilm Recipes for Spring Flower Photography

*Night Statue* – Jackson Hole, WY – Fujifilm X100V – Serr’s 500T Recipe

10 Must Try Film Simulation Recipes for Night Photography

*Pink Blossom Bush* – San Diego, CA – Fujifilm X-T5 – Emulsion ’86 Recipe

Top 7 Best Nostalgic Neg. Film Simulation Recipes for Fujifilm X-Trans V Cameras

*Boat Shack at Sunset* – Tempe, AZ – Fujifilm X-T5 – Fujicolor Super HG v2 Recipe

8 Fujifilm Film Simulation Recipes for Those Hot Summer Nights

*Argus 520 Camera* – Buckeye, AZ – Fujifilm X100V – Kodak Max 800 Recipe

Getting that ’90’s Film Look with Fujifilm Cameras

*Arizona Barn* – Sedona, Arizona – Fujifilm X-T5 – Vibrant Arizona Recipe

The First 7 Film Simulation Recipes to try on your Fujifilm X-Trans V camera

*Autumn Aspen* – Big Arm, MT – Fujifilm X100V – Vintage Vibes Recipe

10 Vintage Film Simulation Recipes You Should Try!

*Rose Budding* – Buckeye, AZ – Fujifilm X-T5 – Kodachrome Blue Recipe

5 Amazing Film Simulation Recipes (that few are using…)

*Coastal Sunset Colors* – Laguna Beach, CA – Fujifilm X100V – Reggie’s Portra Recipe

Comparing 6 Kodak Portra Film Simulation Recipes

*Mountain Pines at Sunset* – Flagstaff, AZ – Fujifilm X-T5 – Reala Ace Recipe

Five Fantastic Film Simulation Recipes that are Versatile

I used THESE 7 Film Simulation Recipes for Fall Colors on my Fujifilm X100V

*First Dance* – Laguna Beach, CA – Fujifilm X100V – Fujicolor NPS 160 Pulled Recipe

Using Fujifilm Film Simulation Recipes for Wedding Photography

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

Help Support Fuji X Weekly!

$5.00

Reala Ace + 3 More Recipes!

Posted on November 3, 2023 by Ritchie Roesch

*Luxury Among Palms* – Laguna Hills, CA – Fujifilm X-T5 – Reala Ace Recipe

Today’s SOOC Live broadcast was wonderful. Thank you to everyone who tuned in and participated—you all make it great!

We discusses the new Reala Ace film simulation, and talked at length about my Reala Ace Film Simulation Recipe. The Reala Ace Recipe is for X-Trans V cameras, and not everyone has one of those cameras, and even if you do, you might prefer a different option, so Nathalie Boucry and I offered three similar Recipes as alternatives. Specifically, we suggested Fujicolor Reala 100, Fujicolor Superia 100, and Fujicolor 100 Industrial. Watch the video below to learn more.

There are two Fujicolor Reala 100 Recipes—one for X-Trans IV (excluding the X-T3 and X-T30), and one for X-Trans V. Likewise, there are two Fujicolor Superia 100 Recipes—one for X-Trans IV (excluding the X-T3 and X-T30), and one for X-Trans V. The Fujicolor 100 Industrial Recipe is just for the X-T3 and X-T30; however, simply ignore Color Chrome Effect to use it on X-Trans III (it will look very similar, and only slightly different), or for newer cameras, set Grain size to Small, Color Chrome FX Blue to Off, and Clarity to 0.

While you are here, the long-overdue Viewers’ Images slideshow from the previous broadcast was finally published. You can watch it below. There are some really great pictures by you all, so you’ll definitely want to take a look. Thanks to everyone who submitted photographs!

Some pictures from today’s show:

Five Fantastic Film Simulation Recipes that are Versatile

Posted on October 30, 2023 by Ritchie Roesch

*Tattoo & Turkish Pizza* – Tempe, AZ – Fujifilm X-T5 – Reala Ace Recipe

Color film almost always is either Daylight balanced or Tungsten balanced. The majority of emulsions are Daylight balanced. Use film intended for sunny light in the daytime, and use film intended for artificial light at night. If the light condition is something else, color correction filters can be used to achieve a correct color cast.

Film Simulation Recipes are often quite similar, and many are meant for use during daylight hours or (less commonly) at night. I get asked sometimes if there are good Recipes that can be used anytime, no matter the light. I think it’s a great strategy to have at least one versatile option programmed into your Custom Presets ready to go. It may or may not be your favorite Recipe, but you know it’s going to deliver good results no matter the situation.

There are actually quite a few of these types of Recipes. The easiest way to find them is, if you are a Fuji X Weekly App Patron, is to Filter by White Balance in the App, and look for Auto White Balance (or Auto White Priority) Recipes. Some are more all-purpose than others, but all of those will be at least somewhat versatile. Even some Recipes that are don’t use Auto White Balance can be surprisingly capable in a variety of light situations—just because it doesn’t use AWB doesn’t mean that it can only be used in one scenario—but those that do use Auto are going to be more so.

*Night Snakes* – Tempe, AZ – Fujifilm X-T5 – Fujicolor Super HG v2

Below I have five personal picks for versatile Film Simulation Recipes. These are options that I know from my own use are going to be good for when the light condition is uncertain or changing. These are fantastic all-purpose Recipes that you should considered having at-the-ready in your C1-C7 (or C1-C4 if you have an X-S camera) Custom Presets. I like to have at least one programmed, just in case I need it.

Everyday Astia is an X-Trans III plus X-T3 and X-T30 Recipe; to use it on newer X-Trans IV cameras, set Grain size to Small, Color Chrome Effect and Color Chrome FX Blue to Off, and Clarity to 0. Fujicolor NPS 160 Pulled is my go-to Recipe for indoor artificial light (including a wedding reception); to use it on X-Trans V, set Color Chrome FX Blue to Weak. Fujicolor Super HG v2 has both an X-Trans IV version and an X-Trans V. Reggie’s Portra is a very popular for X-Trans IV, to use it on X-Trans V set Color Chrome FX Blue to Off. Reala Ace, which is for X-Trans V, is pretty new but currently getting a lot of buzz—join Fujifilm X-Photographer Nathalie Boucry and myself this coming Thursday (November 2nd) as we discuss the Reala Ace Film Simulation Recipe!

Everyday Astia

Fujicolor NPS 160 Pulled

Fujicolor Super HG v2

Reggie’s Portra

Reala Ace

I used THESE 7 Film Simulation Recipes for Fall Colors on my Fujifilm X100V

Posted on October 21, 2023 by Ritchie Roesch

When you think of dramatic displays of Autumn colors, you probably don’t think of Arizona. It’s easy to miss that Arizona has a significant amount of mountainous terrain, with extensive forests and even snow-capped peaks in the winter. In autumn, some of these trees change color as the leaves prepare to drop. The fall foliage in Arizona can be impressive!

Two days ago I drove up north to the slopes of the San Francisco Peaks just outside of Flagstaff for an autumn hike. The trail is called Aspen Corner Trail, which sits right below the Snowbowl ski resort. Interestingly, I was looking for the Aspen Loop Nature Trail, but I didn’t quite go far enough, and didn’t realize until later that I wasn’t even on the intended path. I had never been on any trails in this area before; I saw all of the cars and the many photographers, and just figured I was in the right place.

It was an easy hike, with very short sections that might be considered moderate (maybe). I didn’t go anywhere close to the end, just perhaps a quarter mile down where the thick forest opened to a large meadow, then back to the car as the sun was beginning to dip below the horizon. The place was nothing short of stunning!

*Arizona Aspens* – Flagstaff, AZ – Fujifilm X100V – The Rockwell

I had my Fujifilm X100V with me. I picked seven Film Simulation Recipes—some because I knew they’d do well, and others because I wasn’t sure how they’d do and I wanted to find out. The Recipes that I chose for my C1-C7 are The Rockwell, Kodak Ektar 100, Kodak Portra 400, Reggie’s Portra, CineStill 400D v2, Fujicolor Superia 100, and Fujicolor NPH. I’ll discuss each briefly below, providing some thoughts on how well they did. One more note: I used a 5% CineBloom filter with all of these pictures.

For those who don’t know or remember, the way I’m currently using my X100V is the rear LCD is turned off, and the hybrid viewfinder is set to OVF. That means that I don’t know how the pictures turned out until later when I review them. This is intended to replicate a film-like experience, in a way. Since I don’t know what I’m getting, I try to take a little extra care to ensure that I get it right. Also, I really enjoy reviewing all of the photos at once, not knowing how exactly it all went; there’s a certain thrill when one is especially great or unexpectedly interesting. This process has been a good exercise for me.

Now, let’s take a look at the seven Film Simulation Recipes that I used to photograph fall colors on my Fujifilm X100V!

The Rockwell

This Recipe produces bright and colorful pictures. If you want to really show off a vibrant scene, The Rockwell will do it! The flip side is that it can be over-the-top sometimes—too bold, too colorful, too crisp. I was confident that this would be a good option, and I was right. If you want to emphasize the vivid colors of autumn, The Rockwell will deliver just that. I used this Recipe more than any of the others.

Kodak Ektar 100

I don’t shoot with the Kodak Ektar 100 Recipe all that often, so I thought this would be a good opportunity. It’s warm and vibrant, and seemingly a good match for autumn photography. After reviewing the pictures, my regret is not using this Recipe more! The image above, for example, is one of my favorites of the outing. I’m going to keep this one programmed into my camera for awhile longer.

Kodak Portra 400

Kodak Portra 400 v2 is one of the Recipes that I typically use the most—definitely Top 5, maybe Top 3—so I thought I’d try the “v1” Kodak Portra 400 Recipe instead on this trip. I just don’t shoot with it often enough. After reviewing the pictures, this is another one that I wish I had used more. While it doesn’t emphasize the colors like the two Recipes above, it does produce an analogue-like rendering that’s easy to appreciate.

Reggie’s Portra

Another Recipe that I didn’t use a lot was Reggie’s Portra, although it certainly did quite well. In retrospect, I probably didn’t need to have both Kodak Portra 400 and Reggie’s Portra programmed into the camera. Personally, I prefer the aesthetic of Kodak Portra 400 just slightly more (although, overall, they’re pretty similar), but Reggie’s Portra is more versatile, so it can be the better choice if the light might be something other than sunny daylight. If I were to do this again, I’d choose either Kodak Portra 400 or Reggie’s Portra and not both.

CineStill 400D v2

This is a Recipe that I suspected might be very good for fall foliage photography, but I wasn’t certain. I’m now convinced that it is! Upon reviewing the pictures, CineStill 400D v2 was one of my favorite Recipes that I used, and another that I wished that I used more. Very beautiful results, perhaps the best of these seven for the light and colors on this particular adventure. I really liked this one!

Fujicolor Superia 100

Fujicolor Superia 100 was my second-most used Recipe (only behind The Rockwell), and I chose it because I wanted a Fuji color-negative film look, plus I thought this might be a good option for autumn images (although I wasn’t sure). While the picture at the very top of this article, which was captured with this Recipe, was one of my top favorites of this trip, overall I was a tad disappointed with Fujiclor Superia 100. It wasn’t a bad choice for fall colors, but it wasn’t as good as some of the others that I used less often. So, basically, Fujicolor Superia 100 was great sometimes and mediocre at other times, depending on the exact light and colors.

Fujicolor NPH

I wondered how a Recipe with a bit more green in it might fare in the fall. I knew there’d be some pines, and figured that the Fujicolor NPH Recipe might render those well. I think the results were interesting—and definitely different than the others—but this was my least favorite of the seven. That’s not to say that it was bad, but only I preferred the other six more. It has some potential, though—for example, the very last picture has an obvious similarity to some prints I have in a photo box in the closet. But, overall, I think there are better Film Simulation Recipes for autumn photography.

Find these Film Simulation Recipes and many more on the Fuji X Weekly App! Consider becoming a Patron subscriber to unlock the best App experience and to support Fuji X Weekly.

Help Support Fuji X Weekly!

$5.00